HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

Hi,
We have installed content server on Linux OS.and DB as MaxDB.
I created the repository using OAC0. The with same tab I went to CSADMIN.
When I try to create repository with executing it , it ask for user name and password.
I mentioned the SAPCS admin user name and password, but i got HTTP 401 error. Unauthorized user.
Even i tried with prefixing domain name and with root user ID and password.
But got the same error. Please help
Regards,
Hemant

Hi
We are also facing the same problem. but as you mentioned in solution.
user: <domain>/<admin-user>
pw: pw
I am getting the same problem of Error 401. Kindly describe in detail with example.
Thanks
Regards,
R Karthikeyan

Similar Messages

EWA reports for SAP Content Server

Hi
I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for SAP Content Server.
As per Content Server for EWA reports need to be configuring only Database and OS.
Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
Regards,
Panu

Hi There
In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
this link below..
http://service.sap.com/EWA >> Media Library
Best Regards
Jai Wardhan

SAP Parameter Recommended note for SAP Content Server 6.40

Hi..
we are planning to installation of SAP Content Server 6.40 with SAP MAXDB 7.6 on Solaris, Kindly provide what are the recommendation need to perform before installation of Production system.
Like IO Buffer Cache[MB] , Number of Sessions or any SAP Parameter Recommended note for SAP Content Server 6.40 with SAP MAXDB 7.6.
Regards,
Panu

Hello,
Did you already check the preparations and parameters in the SAP CS 6.40 installation guide ?
You can find topics in the Installation Guide like :
- Planning and Sizing of the Database Instance
- Preparations
For more in depth tuning also have a look at the following document :
Operational Guide - SAP Content Server
This document contains the complete list of Content Server parameters.
Success.
Wim

SAP Content Server can be installed and supported on a Virtual Machine

Hi,
I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
Are there any sap notes to support this.
Regards,
Rajiv

SAP support VMWARE
MAXDB support VMWARE.
you are free to go.
I would ask this question in the SAP on VMWARE group at Virtualization on Windows
close message here when you created the message in the proper forum.

Content repository creation for SAP Content Server

Hi,
I have installed Conteont Server 6.5 and Cache Server with Max DB 7.9.8.12 instance on windows server 2008 platform.Now connection to the content server with SAP Netweaver 7.4 on different host is established .When i am trying to create repository in Content Server Administration in application SAP Netweaver 7.4 server an error is prompted as:
Can any one please suggest me a solution
regards
uday reddy

Hi Chandu,
Thanks for the reply,
I have tried the both commands mentioned in sap note 301352.It is showing results as
Error : The specified driver does not exist.
Please suggest me with a solution.
regards
uday reddy

Liscence for SAP Content Server

Hello,
Our client is using SAP ECC 6.0 system. They want to start using DMS. Content server is not installed. Do we need seperate liscence for Content server?
Regards,
Milind Dumbre

Dear Milind,
maybe you can find useful information on the SAP Service Marketplace under http://service.sap.com/contentserver.
Best regards,
Christoph

Http 401 error when uploading file to content services

Hi,
When i try to upload a document, the document is created in the folder with empty content and i have the 401 http error.
Someone can help me to resolve thise problem.
Thank's for advance.

I found the response to the problem. I summarize the solution in the following point :
1- when you connect to a standalone content services server via the webservices api, you get a single String as cookie and to upload a document to server you use the same single cookie.
2- bu when you connect to cluster content services via the webservices api, you get an Array of String as cookies and to upload a document to server you need to transform the array of cookie into a single String cookie to be able to be authenticated by the http server, look to the following code
String cookie="";
for(int i=0;i < connection.getCookie().length;i++) {
cookie = cookie + connection.getCookie() +";";

SAP Content server will not communicate with MaxDb 7.8

Hello all
For the past few months we have been testing an upgrade from SAP CS 630 to SAP CS 640 and from MaxDb 7.6 to MaxDb 7.8. We are also moving both applications to a new server. We have test the process at least 10 times in the past 4 month and this weekend was go live. We shut down CS and put the database in ADMIN mode to do a backup of the most recent data. The database was transfered to the new server and was restored using Data Manager 7.6. Once the restore was complete, we ran the MaxDb 7.8 upgrade program as ADMIN and it appeard that eveything was ok. One other note, because on the old server the database was approaching the 90% mark, we increased the nubmer of data areas on the new server from 15 to 25. Everything appeard to go ok during the upgrade and I was able to connect to the database using Data Studio. Once we confirmed the database was what we though was stable, we CHANGE THE IP ADDRESS of the new server to that of the old server. We had done this during our testing and eveything appears to work OK with our test SAP instance. Well, this time when we connect to CS via the localhost connection, CS returned that we were on line with SAP, but that we were not connected to the database.
This is what we normally see:
contRep="L1";contRepStatus="data(82%) log(3%)";pVersion="0046";storage="ContentStorage
This is what we saw this morning
contRep="L1";contRepStatus="Online";pVersion="0046";storage="ContentStorage
Not sure what happened, but we ended up going back to the old server until we can determine what went wrong. Does anyboy have any suggestion as to why this could have happened and what we need to do to fix the issue.

Thanks all for the help, but we found the problem. 6 weeks ago we upgraded to ECC 6 and at that time we have a problem with the certificates, so we could not retreive any documents. There is a check box in the CSADMIN configuration that disables the check for the certificate, so we disabled the check. Everything work OK with patch version 9, even when we fixed the certifiactes. For some reason patch 11 did not like that box checked. Once we on checked the box, everything worked fine. Since we want to know why this makes a difference I have opened up a note with SAP to see if they can explain the problem
Thanks again

System Requirement for SAP Crystal Server in Linux Suse 11

have trouble installing CRS 2011 in linux suse 11, need help to share best system requirements to install it.
the condition is that this server will be use for mirroring database that support oracle 10g.

Hi Felix,
Please re-post to the BI Platform space.
This space is designated for CR Design issues.
P.S: You may download the Minimum System requirements and other such docs at www.help.sap
(Choose Analytics > Business Intelligence > Crystal Server)
-Abhilash

Https access to Sap Content Server 620 with R/3 46C

We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
=      using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
=    provides this ordered list of 9 ciphersuites:
=       1. SSL_RSA_WITH_RC4_128_SHA
=       2. SSL_RSA_WITH_RC4_128_MD5
=       3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
=       4. SSL_RSA_WITH_DES_CBC_SHA
=       5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
=       6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
=       7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
=       8. SSL_RSA_WITH_NULL_SHA
=       9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c       774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c       777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
Regards

Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.

SAP Content Server 6.40 on Windows 2003, IIS 6, filesystem storage

Hello:
We have installed SAP Content Sever 6.40 on Windows Server 2003, IIS 6, and using the filesystem as storage, not SAPDB.
The installation goes without any issues and completes successfully, but the test URL http://<host>:<port>/ContentServer/ContentServer.dll?serverInfo returns "The page cannot be displayed" and not the expected system info/status. We need to fix this before moving on to config in ERP, any suggestions into Content Server or IIS settings/configuration is appreciated.
We're using the standard install port 1090, and testing from a browser in the same host.
Regards,
Eduardo

Additional information:
Looking in the event viewer under application, I see the following 2 errors:
1) The HTTP Filter DLL D:\Program Files\SAP\Content Server\ContentServer.dll failed to load. The data is the error.
Data: 0000: 0000007f
2) Could not load all ISAPI filters for site/service. Therefore startup aborted.
Regards,
Eduardo

Role of MaxDb in SAP content server

Hello experts,
We have already gone through the content server documents.
We are not yet clear with role of MaxDb database in SAP content sever.
Is it prerequisite to install MaxDb for SAP content server?(eventhough documents has to be store in file system)
We Want to perform document archiving, for this reason we want to store documents in File system.
So in this scenario where will be the meta data stored?

Hi Akshay,
You can check the installation guide, you can install Content server without maxdb on a separate server and it will use the storage (File system) of that server to store the documents.
As far as I know, the meta data is stored on the file system(if Maxdb not used) or on Maxdb and the header is stored on the SAP side.
For installation without maxdb, you can check the below link
"http://itsiti.com/sap-content-cache-server-installation-steps"
-AC

What is the latest prod. supported MaxDB Version w. SAP Content Server 6.40

What is the most actual supportet MaxDB Version when using with SAP Contentserver 6.40?
In PAM Page 5 (of the Powerpoint) the official Version should be 7.5.
In "install and Upgrade" NW 7.0 there is the "NW 7.0 Presentation - MaxDB Release 7.6.03" available for Download and the "MaxDB RDBMS 7.7.06 Build 10 - Windows Server on x64 64bit "
Does that mean, that the 7.7 Version is official supported for Production?
Searched the Notest but found no answer for that.
Ulrich
... half an hour later ...
just found MAXDB 7.7 Installation which suggest the 7.7 is the latest official supported.
could that be the answer?
Ulrich
Edited by: Ulrich Neumann on Feb 2, 2010 12:39 PM

Hello Ulrich,
Please refer at SAP link http://service.sap.com/pam for full platform availability information of the new version. SAP Content Server is shipped with NetWeaver 2004s SR1.
< service.sap.com/pam -> SAP NetWeaver 04 -> Database Platforms -> Content Server
   Select in MAXDB section u201CWINDOWS SERVER...   u201C >
< according PAM :
MAXDB 7.6 64-BIT is released on WINDOWS SERVER 2003/X64 64BIT for
SAP CONTENT SERVER 6.40 >
As you know the SAP installation guide for Content server is available at::
service.sap.com/installations -> SAP Components
->SAP Content Server -> Release 6.40 and higher
< Installation - Standalone Engines >
For additional information and documentation please go at SAP link:
http://service.sap.com/ContentServer
-> FAQs SAP Content Server
Thank you and best regards, Natalia Khlopina

SAP Content server installation using apache web server under HP-UX 11i

Hello,
I installed a SAP Content Server 6.4 in HP-UX 11.11 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
kbwpdc 106: /home/dmscs/bin>./apachectl start
Syntax error on line 233 of /home/dmscs/conf/httpd.conf:
Cannot load /home/dmscs/modules/mod_sapcs2.so into server: Invalid
argument
I think apache web server doesn't know mod_sapcs2.so although it exists in the directory(/home/dmscs/module).
- Working sequence
1) Environment variables setup to compile with 64bit.
2) "configure" generation with option relevant to SAP content server
3) "make" generation
4) "make install" generation
5) Install SAP Content server 6.40
6) Install MaxDB 7.6
7) Edit httpd.conf for loading mod_sapcs2.so module and changing Listen port.
8) Start apache web server.
Do I need to configure to solve this syntext error? missing any step?
Please let me know to solution if you had experienced with the same problem.
I will wait for your response.
Thanks,
Mark Yoo.

Hi Mark,
Can i check with you how do you set your environment to compile in 64bit ? My file mod_sapcs.o apear in the libexec directory instead of mod_sapcs.so. That why my apache cannot start. It prompted Cannot load module /home/sapcs/libexec/mod_sapc.o
Regards
Kim

How to see documents checked-in to SAP Content Server ?

Hi ,
I'm not sure if this is the right forum for this question but I did not find anything more pertinent.
We have a scenario in ECC 5.0 which we are attaching PDF/etc document to SAP DMS Document records in Tcode CV01N/CV02N . Subsequently we check-in those originals to the SAP Content Server. All this is working just fine as the underlying settings for the content repository in Tcode CSADMIN is appropriately set.
Is there a way to monitor how many and which documents have been checked in to the SAP COntent server. In the 46C/47 days, we used to go to Tcode OAAD and get a count & list of all documents that have been shipped to a content repository. In the scenario for SAP Content server, I'm unable to use this tcode to get the information.
Is there another tcode that will give me the information on the documents linked to the Content Server ?
Your help is greatly appreciated.
Thanks,
Vipin

Hi to add more...
On service Market Place....
Go with the below path
Installations and Upgrades --> " SAP Application Components" --> SAP EASY DOCUMENT MANAGEMENT" ---> SAP EASY DOCUMENT MGMT 6.00.
Thanks,
Tanuj

HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

Similar Messages

Maybe you are looking for