HTTP 403 ERROR IN SXMB_MONI

Hello Experts,
My interface is JDBC to ABAP PROXY in DEV it is workin fine in QUAL in SXMB_MONI it is throwing HTTP Error
Error while sending by HTTP (error code: 403 ,error text: Forbidden) (See attachment HTMLError for details) .
if i open the message red colour flag is on CALL ADOPTER.
Please through some light on the issue.
Regards
Praveen

Hi,
you can refer http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?QuickLink=index&overridelayout=true
I hope this will solve your problem.
Thanks,
Chandra

Similar Messages

Http 403 error message when connecting to WRT120n router

I recently upgraded to the WRT120n router at home. I quickly connected my desktop computer, my wife's Mac and two Lenovos, but my son's HP Pavilion cannot access the Internet. It returns the http 403 error message. Windows (Vista) and Network Magic tell me the laptop is connected to the router and the Internet, but the browser does not work. Have tried IE, Chrome and Firefox - same result. Have also tried to connect with cable. Hooking up wirelessly with WPA, was no problem, but the browser is unable to access the Internet.
Grateful for any help.

What is the ip address you are getting on the Vista Computer..?
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Wireless Network Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Wireless Network Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

HTTP 403 Error in AS2 Connection

Hi,
Would really appreciate some inputs on this one. Just to give a background, we're tying to establish an AS2 connection between us and a 3rd party. The 3rd party tried to send a test message using our connecton details, but they got an HTTP 403 Error - Forbidden when trying to send a message.
I have confirmed the following:
- All the certificates (AS2 certificate, SSL, etc) needed for this has been uploaded in the 3rd party's system.
- The firewall has be opened for the 3rd party's sending IP address.
- We have also uploaded the 3rd party's certificates to our system.
- I checked the destination url of the message, and it seems that it is up as well.
As I am not very familiar and new to AS2, I'm currently stuck and running out of possible options.
Is anyone familiar with this? And, a possible cause and solution?
Thanks a lot!

Hi Ivan,
Actually, we have verified our AS2 ID that is set up in the 3rd party already, and it should already be the expected one. Although, I think I will need to ask them the full details already.
I also tried the tool you gave (was helpful btw), and it seems that I was able to send a message successfully to the 3rd party. This was the log:
OUTGOING TRANSMISSION TO ... Originator: ... Recipient: ... Signature: on Encryption: on Compression: off MDN Requested: Asynchronous: http://localhost:8080/AsyncMDN.aspx MDN Signature: on Transmission was successful. -TIMESTAMP Tue, 14 Jul 2009 13:03:20 +08:00 [1247547800343]- Verification of receipt is pending an asynchronous MDN.
The problem is as this software is on my localhost. I'm not sure if it is practical to have the 3rd party test and send to this other connection for this dummy server as this won't be used anyway in the planned implementation.
So I guess the conclusion that I got from this is so far, the configuration that I currently did on the actual connection is supposedly to be correct, and that the problem is on the 3rs party's side? Is that right?

Shared Services - HTTP 403 error when trying to access from user's PC

We recently upgraded to Shared Services 9.3.1. We can get into the User Mgt Console when remoted into the Shared Services server; however, when I try to access the URL from my PC, I get an HTTP 403 error. I have confirmed in my Internet Options/Security that I have the Shared Services server as a trusted site. From looking at the error closer, it appears that it finds the website, but the website denies my computer access. If I remote into one of our other Hyperion servers and use the Shared Services URL, it works fine. What do we need to change so that the Hyperion admins can access the Shared Services URL from their own PC w/o having to remote into the servers?
Terri

I never tried using the IP address until just a few minutes ago and I still got the HTTP 403 error.
I also just tried using Mozilla and got the following error:
The Server is not able to service this request: [Server:002621]Connection rejected, the server license allows connections from only 5 unique IP addresses.
When we upgraded from Shared Services 9.2.0.2 to 9.3.1, we also upgraded BEA WebLogic from 8.1.4 to 9.2. We did not have this issue when using 8.1.4.
Thanks for your help!
Terri

Http 403 errors ...

HI All,
we have an ADF application developed using jdev 11.1.2.1.
we have some web pages that are assigned to the application
role: users.
the app role is mapped to the enterprise role: agt_users.
after deploying to a WLS standalone server, we were able to
login, but a http 403 error was returned.
i have tried creating a role in myrealm->global_roles->agt_users,
and have added the group/user to role.
we're still getting 403 errors.
how can we create an enterprise role, so that the pages can
be returned ?
thanks very much in advance ...
sam

So, u have Application Roles which is mapped to Enterprise Roles & Users under Application Roles, thats fine.
however, we cannot find places to add the required
enterprise roles.Means, u didnot see any place in weblogic to create Enterprise Roles ?
Enterprise Roles in weblogic is equivalent to Group which u can find at Security Realms>myrealm>Users & Groups>Groups.
Create your Enterprise Roles of Application & under it assign Users here.
In your deployment file (.EAR) - From Application Menu>Application Properties>Deployment , deslect 'users & groups' checkbox which will prevent to upload of local user & group.
Bz u are creating your Users & Groups specifically in weblogic.

While Creating Web service call from JDeveloper getting http 403 error

1. I have created the new application as Oracle Fusion (ADF) application
2. I have included the web service technology to the application
3. I am trying to create new web service data control layer , after specifying URL we are getting the following error
WSDL:Exception:fault code:=OTHER_ERROR failed read from WSDL from http://10.141.28.242:1030/oraclediagent/OdiInvoke?wsdl
HTTP connection error code is 403.
could anyone please try to solve this
thanks
887401

HTTP 403 means you don't have permission to access that URL. Have you supplied credentials?

Http:403 error in tomcat

Hi,
I am getting not authorised to access localhost error when i am trying to access a JSP webpage.
I am using tomcat 5.5 as webserver. Java 1.5 eclipse 3.1 IDE and accessing the webpage from browser in BlackBerry 4.1 simulator.
It used to work for me well in jdk 1.4 and tomcat 5 and BlackBerry 4.0 simulator. are there any settings that i need to change?
Can any one help me with the problem please.
Thank you

I am not familiar with blackberry simulator but there are lot of resources which describes about 403 errors
check out this link
http://www.checkupdown.com/status/E403.html

HTTP 403 Error

Hello,
I have a question about the Web service configuration.
I do a fresh install of OS X ML and the OS X server.
I use Calendar server and Contacts Server with no problem with My Iphone and Ipad.
But when I configure shared folders with Webdav, my Idevices can't connect to them.
Under Lion Server I didn't have this problem. So I looked the Web Server, and I can't access to the defalut website with a 403 error.
I'm not an expert Apache and Webservices.
Someone can say to me if there is a specific configuration to be done??
Thanks
Franck.

Hi jacekj and welcome to the BlackBerry Forums
Read this link please
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03956&sliceId=1&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Http 403 error on trying to edit user profile details in sharepoint 2010

Hi,
After going to My site of our site, user is able to click ‘Edit my profile’.
On clicking Edit my profile user is getting navigated to following URL which is expected
https://mysite.myorg.comlayouts/Editprofile.aspx?accountname=domainname%5cusername
and  browser shows http 403 , the website declined to show the webpage.
But actually after clicking ‘edit my profile’ user should be able to edit his profile details.
Please let me know if I am missing any configuration that is missing to achieve.
Regards,

Hi Inder,
ULS logs are given below-
GET:http://mysite.myorg.com:80/_layouts/EditProfile.aspx?accountname=domainname%5Cusername))
05/16/2014 12:58:02.95 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (GET:http://mysite.myorg.com:80/_layouts/EditProfile.aspx?accountname=domainname%5Cusername) 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:02.96 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
Logging Correlation Data      xmnv Medium Site=/ 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:03.01 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
Topology                      e5mc Medium WcfSendRequest: RemoteAddress: 'https://sepcsps002:32844/359dfd134e324d7d853d7ea685d48f95/ProfileDBCacheService.svc'
Channel: 'Microsoft.Office.Server.UserProfiles.IProfileDBCacheService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetUserData' MessageId: 'urn:uuid:494dc7cf-1b45-4189-9e87-e8dd5a92aa11' 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:03.09 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
General                       8kh7 High    Access denied. 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:03.09 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
General                       72nz Medium Videntityinfo::isFreshToken reported failure. 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:03.10 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
General                       8kh7 High    Access denied. 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:03.10 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
Monitoring                    b4ly High    Leaving Monitored Scope (CachedObjectFactory: Caching Web at:
http://mysite.myorg.com). Execution Time=21.1277 8062b9ca-aa99-4347-860b-602b91bd09ad
05/16/2014 12:58:03.10 w3wp.exe (0x46AC)                       0x33E4 SharePoint Foundation
General                       0000 High    UnauthorizedAccessException for the request. 403 Forbidden will be
returned. Error=Exception of type 'System.Web.HttpUnhandledException' was thrown.   at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)  at ASP._layouts_editprofile_aspx.ProcessRequest(HttpContext
context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolea... 8062b9ca-aa99-4347-860b-602b91bd09ad

Seeburger AS2 Sender Adapter : http: 403 error

Hi All,
We have a scenario where the external party is sending xml message to xi.
While sending they are getting the below error.
u2022 Error(Error(com.cyclonecommerce.tradingengine.transport.TransportException: Retryable response: 403 Forbidden), ExchangePointId(Id(147995587),
Has anyone encountered this error before?
Any idea what might be the problem?
Regards,
Aarthi

Hi,
This error may have different reasons:
1) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
2) A valid sender agreement is missing.
3) There are more then one AS2 sender agreements with the same sender AND receiver party.
4) The corresponding inbound channel is set to inactive.
Regards,
Prakasu.M

HTTP 403 error when connecting to MySQL

Hello all. I have read a few posts that are similar in nature to the issue that I am having. Before I run off to the Ubuntu discussion forum, I thought that I would run this by some of the resident gurus. First, my setup.
Running DW CS6 on my laptop. OS = Windows 7 Pro
Have MySQL, PHP, Apache2 running on Ubuntu Server edition v.12.04.3 LTS Codename precise
The Ubuntu server is running as a Hyper-V VM in Windows Server 2012
Conecting via FTP to the server and web directory that holds my PHP content functions just as it should.
Connecting to the MySQL database on the other hand is a different story. My database and tables are both setup. And, I can connect to the database via a require connect.php test file that I have written. I use the same credentials in this file and the CS6 database setup.
Here are two screen shots of some results. Any assistance would be greatly appreciated. Thank you. Peter
And the HTTP error 403

Thank you for the prompt reply Ben. I appreciate it. This is all that my phpmyadmin.conf consists of:
So, am I to understand from your post that CS6 database setup uses phpmyadmin to communicate with MySQL?
# phpMyAdmin default Apache configuration
Alias /phpmyadmin /usr/share/phpmyadmin
<Directory /usr/share/phpmyadmin>
    Options FollowSymLinks
    DirectoryIndex index.php
    <IfModule mod_php5.c>
        AddType application/x-httpd-php .php
        php_flag magic_quotes_gpc Off
        php_flag track_vars On
        php_flag register_globals Off
        php_admin_flag allow_url_fopen Off
        php_value include_path .
        php_admin_value upload_tmp_dir /var/lib/phpmyadmin/tmp
        php_admin_value open_basedir /usr/share/phpmyadmin/:/etc/phpmyadmin/:/var/lib/phpmyadmin/
    </IfModule>
</Directory>
# Authorize for setup
<Directory /usr/share/phpmyadmin/setup>
    <IfModule mod_authn_file.c>
    AuthType Basic
    AuthName "phpMyAdmin Setup"
    AuthUserFile /etc/phpmyadmin/htpasswd.setup
    </IfModule>
    Require valid-user
</Directory>
# Disallow web access to directories that don't need it
<Directory /usr/share/phpmyadmin/libraries>
    Order Deny,Allow
    Deny from All
</Directory>
<Directory /usr/share/phpmyadmin/setup/lib>
    Order Deny,Allow
    Deny from All
</Directory>

Getting HTTP 403/500 errors when accessing SharePoint 2010 pages

Hi,
I'm getting intermittent HTTP 403/500 errors when accessing SharePoint Foundation 2010 pages.
When it happens, any SharePoint pages I access I get a HTTP 403 error (example: /sites/test/default.aspx) . If I don't specify a page, I get a HTTP 500 error (example: /sites/test/). What's odd is that I have non-SharePoint .NET applications running on the
same server under the "_layouts" directory and those still work just fine.
After recycling the IIS application pool, it starts to work again, but sometime won't stay up very long.
Does anyone encounter this problem before?
TIA
Also, I'm hoping to understand what the "Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo" method does to help me track down this issue. If you have any info on what the above method is doing, I really appreciated.
EVENT LOG
Nothing
ULS LOG
System.Runtime.InteropServices.COMException: Cannot complete this action. Please try again.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)
at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)

These are the associated lines in the ULS.
01/07/2014 02:59:24.33   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Name=Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)
e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Monitoring   b4ly   High   Leaving Monitored Scope (PostResolveRequestCacheHandler).
Execution Time=6.79828022835305   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Runtime   tkau   Unexpected   System.Runtime.InteropServices.COMException:
Cannot complete this action. Please try again.    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32
iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid&
pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl,
Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage,
String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders,
String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Monitoring   b4ly   Medium   Leaving Monitored Scope (Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)).
Execution Time=187.132582493026   e8e08e76-1b88-4913-bce6-b9300e7b63f6
Thanks,

HTTP 403 mess

How do I fix a HTTP 403 error on my Mac using Safari? Is it possible to remove it? It's got everything locked up!

Error 403 means that you don't have the permission to view that particular page.
You can try these steps.
Go step by step and test.
Quit Safari.
Hold the shift key down and relaunch Safari.
Delete cookies
Safari > Preferences > Privacy > Cookies and other website data:
Press the “Remove All Website Data” button.
It will take a while to finish.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.

HTTP 403 while using SharePoint Online REST API anonymously

Hey Team,
While using REST API to get list items (SharePoint Online) anonymously, I am getting HTTP 403 error:
Request: http://server/site/_api/web/lists('guid')/items?$select=Title,Products/Name&$expand=Products/Name
Response: HTTP 403 : System.UnauthorizedAccessException : Access denied. You do not have permission to perform this action or access this resource.
Authenticated users do not face this issue. The list has anonymous access (View) enabled. Anonymous users can access the lists without facing any issue.
I am not sure and could not able to find any link that says anonymous users can't use REST API to get SPListItems. Any input in this regard will be highly appreciated.
Regards,
Sanjay
Either you love IT or leave IT

Hi,
From this documentation from MSDN about
Reading data with REST, “Note that you cannot obtain an access token from code that is running on a browser client. You must obtain the access token from code that is running
on a server”, it will only allow the authenticated users who has an access token to access the REST API.
The two links below will provide more information about authentication in SharePoint 2013:
http://msdn.microsoft.com/en-us/library/fp142382.aspx
http://msdn.microsoft.com/en-us/library/jj687470.aspx
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

403 Forbidden error in SXMB_MONI

Hi guys
I get this error in SXMB_MONI, at the Call Adapter stage
The termination occurred in system ERQ with error code 403 and for the reason Forbidden
Its Quality system. I am able to login to QAS, so while trying to post data into ERQ, I used my username and password in Receiver XI Communication Channel. I checked from SU01 and am not able to find any error there.
The Target Host, Path Prefix and Service Number are correct as I verified that from SMICM of ERQ.
How do I check whether I have the authorization to post data into the QAS system , that's ERQ?
Regards

Are you using Proxy Communication / IDOC Communication???
If Its IDOC, please check RFC destination --> SM59 --> Utilities > Test> Test Authorizations.
If it is Proxy, plz check if HTTP Destination is working fine. And the user has Role 'SAP_XI_APPL_SERV_USER'.
Plz refer link,
[http://help.sap.com/saphelp_nw04s/helpdata/en/d4/d12940cbf2195de10000000a1550b0/frameset.htm]
Regards,
Gouri

HTTP 403 ERROR IN SXMB_MONI

Similar Messages

Maybe you are looking for