HTTP 503 Service Unavailable Error in SAP XI 3.0
Hi All,
I am doing a simple File -> File scenario which picks up a .txt file from a folder and post it to the same folder .My file is getting picked up.But I am getting an error
<SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable Error when sending by HTTP (error code: 503, error text: Service Unavailable)</SAP:Stack>
I have done a cache refresh to resolve this error. But then my error is MAPPING PROGRAM NOT FOUND.When I retry I am getting the HTTP 503 error.
Please suggest any solution for the same .
Thanks,
Tiny
Look similar thread to resolve your problem
Error in Call Adapter (IDOC->XI->FILE)
XI Server Malfunction:Error in Receiver Adapter
Http* Errors in XI
Please can you look at note: 803145
Error : HTTP_RESP_STATUS_CODE_NOT_OK - 503 Service Unavailable
HTTP_RES_STATUS_CODE_NOT_OK,503 error
Similar Messages
-
Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
CustomerHi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Frustrated by Error 503--Service Unavailable Error
I am currently being frustrated by a Error 503--Service Unavailable error. I have worked with WL 8.x for a couple of years but just set up my first WL 9.x server. I cannot find anything in the logs and am at a loss as to how to proceed. I am not sure if the problem is with my WAR file or with the server configuration. Any help would be GREATLY appreciated.
I am having the exact same error. Any solutions yet???
Error is:
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection. -
503 Service Unavailable Error: Application cannot be started!
Hi Experts,
I have NWE 7.11 SP 01 installed . While try to update to SP04, the server restarted automatically & when i try to access the portal link http:<host>:<port>/irj/portal am getting err as 503 service unavailable. I am able to see irj, JMS_Provider,tcjewebservice_srv,tcwddispwda services in failed state. Please help me out.
I got the log file in dev_server0 as follows
[Thr 1122040128] *** ERROR => NiHsLGetNodeAddr: NiPGetHostByName failed (rc=-1) [nixxhsl.cpp 308]
[Thr 1122040128] *** ERROR => NiHsLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhsl.cpp 507]
M [Thr 1211640128] Mon Jul 4 11:44:31 2011
M [Thr 1211640128] ***LOG Q0I=> NiPConnect2: 172.20.50.242:3300: connect (111: Connection refused) [nixxi.cpp 3150]
M [Thr 1211640128] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 31/sock 92
(SI_ECONN_REFUSE/111; I4; ST; 172.20.50.242:3300) [nixxi.cpp 3150]
2.#2011 07 04 15:02:37:289#+0530#Error#/System/Server#
#BC-JAS-JMS#jms#001A6406631A001F0000001800002B3A#4513750000000005##com.sap.jms.server.JMSServerFrame####4083D980A61D11E0842E001A6406631A#4083d980a61d11e0842e001a6406631a#4083d980a61d11e0842e001a6406631a#0#Services Start Processor#Plain##
An error occurred starting the jms_provider service. The applications using JMS resources may not work as expected. For more details, refer to the trace file.#
#2.#2011 07 04 15:02:37:290#+0530#Error#/System/Server#
com.sap.ASJ.krn_srv.000059#BC-JAS-JMS#sap.com/jms_provider#001A6406631A001F0000001B00002B3A#4513750000000005##com.sap.engine.core.service630.container.ServiceRunner####4083D980A61D11E0842E001A6406631A#4083d980a61d11e0842e001a6406631a#4083d980a61d11e0842e001a6406631a#0#Services Start Processor#Java#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Service [{0}] error. Nested exception is: [{1}]#2#jms_provider#java.lang.NoClassDefFoundError: com/sap/engine/services/rmi_p4/interfaces/LocalRemoteByRef
------------------------- Loader Info -------------------------
ClassLoader name: [service:jms_provider]
Living status: alive
Direct parent loaders:
[system:Frame]
[library:core_lib]
[library:j2eeca]
[service:timeout]
[service:naming]
[service:cross]
[service:dbpool]
[service:jmx]
[service:security]
Resources:
/usr/sap/CEP/J00/j2ee/cluster/bin/services/jms_provider/lib/private/sap.com~tc~je~jms_provider~impl.jar
Error occurred while trying to load com.sap.jms.server.remote.JMSRemoteServerImpl#
#2.#2011 07 04 15:02:37:296#+0530#Error#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.002038#EP-PIN-PRT#sap.com/irj#001A6406631A00520000000300002B3A#4513750000000003##com.sap.engine.services.deploy#Guest#0##4083D980A61D11E0842E001A6406631A#4083d980a61d11e0842e001a6406631a#4083d980a61d11e0842e001a6406631a#0#Thread[HTTP Worker [@1593095773],5,Dedicated_Application_Thread]#Java#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global operation [{0}] over [{1}] [{2}] finished with errors for [{3}]ms on server [{4}]#2#500#true#
#2.#2011 07 04 15:02:37:298#+0530#Warning#/System/Server/WebRequests#
com.sap.ASJ.web.000132#BC-JAS-WEB#servlet_jsp#001A6406631A00520000000500002B3A#4513750000000003##com.sap.engine.services.servlets_jsp.server.DeployContext#Guest#0##4083D980A61D11E0842E001A6406631A#4083d980a61d11e0842e001a6406631a#4083d980a61d11e0842e001a6406631a#0#Thread[HTTP Worker [@1593095773],5,Dedicated_Application_Thread]#Java#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Error occurred during retrieving web module context needed for 'Lazy' startup of [irj] web module.
For more details on the problem please check traces searching by logId: null#
Thanks,
ArunHi,
NiPGetHostByName failed
NiPGetHostByAddr failed
Looks like network related issue. Make sure the server is in the network and has proper hostname to IP address mapping maintained.
SiPeekPendConn failed 172.20.50.242:3300
Next check if the port 3300 is free using the netstat command.
Regards,
Srikishan -
503 Service unavailable error while creating a web application
Hello,
i ve just installed VS .NET 2003 & .net Connector 2.0.
i get the following error when creating a web project:
'http://localhost/webapplication1', HTTP/1.0 503 Service unavailable.
Have any of you faced this problem ?
Thanks,
JamalHello,
thanks for the answer.
No i didn't try to create a web projet before installing NCo.
I ran C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_regiis.exe but doesn't help.
I didn't have NCo 1.x installed before !
any other help ?
Thanks, -
Pls the problem started when the system administrator change some of the roles all the service accounts on the active directory. So when I restarted the sharepoint server i noticed the following
1) the sharepoint intranet site does not open. it come ups with errror messages
2) the sharepoint central administration could not open as well
Pls what do i doHi ticodalo, there could be many reasons for this. Check the following links to see if they help:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/9acc688f-40e0-4f89-81f0-fb165076918e/error-while-opening-sharepoint-central-administration?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/8b5fa7ff-f315-4ab1-80b6-542ad0b66b70/sharepoint-foundation-2010-central-administration-error-503?forum=sharepointadminprevious
cameron rautmann -
Oracle Enterprise Manager - HTTP error: 503 Service Unavailable
Dear all,
some time ago I've upgraded Oracle Database 10g up to version 10.2.0.4.0 on a Linux system.
Now if I try to connect to HTTP Oracle Enterprise Manager interface (http://(My server name):1158/em/console/aboutApplication) I see this error into my browser: "503 Service Unavailable - Service is not initialized correctly. The Em Key is not configured properly. Run "emctl status emkey" for more details."
If I perform "emctl status dbconsole" command from command line I have this output
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
So I've tried to restart Oracle Enterprise Manager trough command line using "emctl start dbconsole":
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control .... started.
Now dbconsole seems to be running as follows
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
but my browser always shows the same above error.
If I try to perform the suggested "emctl status emkey" command trough command line I have this output:
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Please enter repository password: (Here I put sysman password)
Exception caught
ORA-06550: line 1, column 13:
PLS-00201: identifier 'MGMT_TIME_SYNC.STARTUPSYNC' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00201: identifier 'MGMT_TIME_SYNC.STARTUPSYNC' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:330)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:287)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:744)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:217)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:968)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1189)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3369)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3475)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4399)
at oracle.sysman.emSDK.conf.ConfigManager.startupEmKey(ConfigManager.java:855)
at oracle.sysman.emSDK.conf.ConfigManager.statusEmKeyInRepos(ConfigManager.java:1113)
at oracle.sysman.eml.sec.rep.EmKeyUtil.statusEmKey(EmKeyUtil.java:273)
at oracle.sysman.eml.sec.rep.EmKeyUtil.main(EmKeyUtil.java:583)
I've done no changes on Linux operating system side.
Could somebody help me, please?
Thanks for help and regards.
DragonsLordKERNEL
Edited by: DragonsLordKERNEL on 17-nov-2008 11.06Check if your emkey file is still under $ORACLE_HOME/sysman/config/emkey.ora
Also check Oracle doc,
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/security2.htm#BABJGGIG
consider remove the recreate emkey if it doesn't work out. -
BC 2 XI - Error 503: Service Unavailable
Folks,
we tried to connect BC and XI via the BC Adapter of XI.
( Scenario: 1.Step: R/3 4.7 => BC 2.Step: idoc => xml via flowservice 3.Step: BC to XI) and we got the following error message in the routing audit log of BC:
com.wm.net.NetException: [B2BCORE.0064.9324] Server Error: HTTP error 503 Service Unavailable
I followed the instructions of SAP-Note 803145. I tested http://<hostname>:<port>/MessagingSystem/receive/AFW/XI and changed the poll value to 100 but without effect.
Please suggest.
thx in advance,
martin
ps.
The XI Wizard generated a sender-agreement (adaptertype bc) which isn't shown in sxi_cache. Only sender-agreements with adaptertype xi are shown in sxi_cache. Is this "working as designed" ?
- Message was edited -Hi Martin,
Just a thought.. Is ur SLD service up and running properly?
cheers,
Prashanth -
XIServer error raised: 503 Service Unavailable with SOAP Adapter
Hi,
We are getting a very strange error from a process that is working fine in 2 other environments.
We are sending a message into the SOAP receiver adapter and are getting the following error at the Call Adapter part of the process :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>503</SAP:P1>
<SAP:P2>Service Unavailable</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>&nbsp;&nbsp;503 &nbsp Service Unavailable</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.40&nbsp;</b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>&nbsp;&nbsp;The requested application, AFW, is currently unavailable.</b></font></p> <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b>&nbsp;Details:</b></td><td valign="top"><PRE>No details available</PRE></font></td></tr></table></font></p> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
We are on XI 3.0 SP13.
Any suggestions ?
Kind regards
Colin.Hi Colin,
Quick look into these-
1) Are you able to test the WebService, because the error tells about unavailable...
For more-
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
2) Is your SOAP Receiver COnfiguration is correct
~ http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
3) Check the wsdl is correct and try look into the input message for the Webservice(SOAP Adapter)
Have a look into this thread-
503 service unavailable
Hope this helps,
Regards,
Moorthy -
Hi experts!!
We are getting the error "HTTP_RESP_STATUS_CODE_NOT_OK - 503 Service Unavailable" can you please let me know what are my options to resolve it.
Any help would be highly appreciated.
Thanks
- RaviHi Ravi,
Reward points if this helps
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
Check out this trouble shooting guide for SAP XI...Section 7.4.4.4 talks about exactly the same problem:-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Reward points if this helps
Regards
Pragathi. -
Interactive Form Error: Invalid Response Code: (503) Service Unavailable
Hi,
Here i am Facing a Problem while i try to develop a sample application using Interactive Forms.
When i tried to Deploy it.
the Error i am getting is
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://localhost:50000/AdobeDocumentServices/Config?style=document"
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:976)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1423)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:279)
... 27 more
i will be very thankful if anyone solve my problem ...
Thank you
SrikanthHi,
you seem to be pointing to a Java stack that either hasn't got the Adobe document services installed or has them incorrectly configured. Check the ADS Configuration Guide again against the settings of the Engine on which you have the ADS running. Without ADS, you won't get a PDF. The URL with http://localhost:50000/AdobeDocumentServices/Config?style=document in it is a good start, but the config is more than just that.
Best regards,
Markus Meisl
SAP NetWeaver Product Management -
503 Service Unavailable,SAP J2EE Engine/7.00
Hi Experts,
I have upgraded J2EE Software Components from SP06 to sp22 successfully.
Components
JSPM
BASETABLES
CORE-TOOLS
JLOGVIEW
SAP-JEE
SAP-JEECOR
SAP_JTECHF
SAP_BUILDT
BI_MMR
KM-KW_JIKS
ADSSAP
CAF-UM
SAP_JTECHS
BI_UDI
Now here is the problem...
When I executed the URL: http://hostname:50100/index.html I'm getting the below error:
"503 Service Unavailable"
SAP J2EE Engine/7.00
Application Stopped
Details: you have requested an application that is currently stopped.
Please guide me on this.
Regards,
Sharath
Log :
IM_ERR_FAILED: SAP_SupportPackage.ElementTypeID="01200615321100062316",Name="SAPK-20011INTBYDSP",Vendor="sap.com",Version="0011" referenced by association SAP_SupportPackageSoftwareComponent.Antecedent=ref"SAP_SoftwareComponent.ElementTypeID=
"01200615320200016633
",Name=
"TBYDSP
",Vendor=
"sap.com
",Version=
"200
"",Dependent=ref"SAP_SupportPackage.ElementTypeID=
"01200615321100062316
",Name=
"SAPK-20011INTBYDSP
",Vendor=
"sap.com
",Version=
"0011
"" does not exist.: Instance of SAP_ExportInstCreation.
Embedded instance(s): Target instance = SAP_SupportPackageSoftwareComponent.Antecedent=ref"SAP_SoftwareComponent.ElementTypeID=
"01200615320200016633
",Name=
"TBYDSP
",Vendor=
"sap.com
",Version=
"200
"",Dependent=ref"SAP_SupportPackage.ElementTypeID=
"01200615321100062316
",Name=
"SAPK-20011INTBYDSP
",Vendor=
"sap.com
",Version=
"0011
CIM_ERR_FAILED: Can not create SAP_SupportPackage.ElementTypeID="01200615321100063170",Name="SP072",Vendor="sap.com",Version="072", instance defines an additional property Owner.: Instance of SAP_ExportInstModification.
Embedded instance(s): Target instance = SAP_SupportPackage.ElementTypeID="01200615321100063170",Name="SP072",Vendor="sap.com",Version="072"
CIM_ERR_FAILED: Can not create SAP_SupportPackage.ElementTypeID="01200615321100063169",Name="SP072",Vendor="sap.com",Version="072", instance defines an additional property Owner.: Instance of SAP_ExportInstModification.
Embedded instance(s): Target instance = SAP_SupportPackage.ElementTypeID="01200615321100063169",Name="SP072",Vendor="sap.com",Version="072"
CIM_ERR_FAILED: Can not create SAP_SupportPackage.ElementTypeID="01200615321100063245",Name="SP038",Vendor="sap.com",Version="038", instance defines an additional property Owner.: Instance of SAP_ExportInstModification.
Embedded instance(s): Target instance = SAP_SupportPackage.ElementTypeID="01200615321100063245",Name="SP038",Vendor="sap.com",Version="038"#
Edited by: sharathbabu gundu on Aug 29, 2011 9:42 PMSharath,
Check if your settings in the Visual Adminstrator for SLD are correct and also test the CIM Client Test there.
Secondly, ensure that the SLDDSUSER has all required roles to access SLD and it is not been locked.
Also, you might want to check this SAP NOTE:669669.
Good Luck!
Sandeep Tudumu -
Hello,
I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
This led me to look at the sharepoint central administration site where I receive the following error:
Error 503 Service Unavailable
I've gone through and validated the identity is set correctly in IIS for the following services:
SharePoint Central Admin v4
SharePoint15AppPool
The SharePoint Web Services Root is set as LocalService instead of the domain user.
The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
Any help would be great!
Thanks!
EricHi Eric,
Thanks for your post.
Please share your detailed team project creation log here.
In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error 503--Service Unavailable. Error while Test the webservice
Hi...
I created a webservice and deply it into a remote weblogic server. It deployed there and when I click on Test client, it shows this error.
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
How we can rectify this.
hope for a reply...
Resmi.Check the WLS server log files for a more detailed error (stacktrace).
Timo -
Hi all,
knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
Situation:
Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
Second child domain also contains a SCCM SP1 server (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
Error:
SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
wsusutil checkhealth =>OK
downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
wsus admin console able to connect and configuration possible => OK
IIS ports configured within SMS are equal to those configured for WSUS website
SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
wcm.log does report an error: (SCCM Log files at the end.)
"The request failed with HTTP status 503: Service Unavailable"
IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
Questions:
What else should I look at? (registyr, SUSDB content,..)
What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
And finally - Who does know the solution ?
wcm.log:
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
wsyncmgr.log (as a result of being not able to configure upstream server I guess):
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)I just experienced the exact same scenario. After much digging I found that csakg6so posted a fix at
Windoows-Noob
Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
Go to internet options
Go to conections
Go to LAN settings
Uncheck all boxes
The original post said to reboot, but that wasn't necessary for me.
After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized.
Maybe you are looking for
-
Purchased app not showing on ipad??
I purchased an app at the itunes store on my computer. I synced my ipad, but the app did not show up. It is in the "purchased" section of the app store, but the icloud symbol is shaded out and I cannot access it. Any ideas?
-
Need sales order creation using bapi in oops
need code for sales order creation using bapi in oops
-
How can I sort content into a-z of album titles
Hi Everyone Hope someone out there can help. I run two libraries on one pc at home, in library one I have the album icon view and I click on "Album" at the top and my albums are organised a to z by album title. However in library two, I cannot get
-
BPC 7.5NW consolidation error
Hi, We are using BPC 7.5 NW version (7.50.04). We changed standard dimension 'GROUPS' to dimension type 'R' and included it in our legal applications. We are using below logic to run both currency conversion and legal consolidation. *RUN_PROGRAM CURR
-
ITouch Apps screen in iTunes out of order
I love the fact that I can rearrange the apps on the home screens from iTunes, but everytime I click to sync, it gives me the warning and then rearranges the order of my apps. If I put them back the way I want, it will rearange again on my next sync.