HTTP Acceleration for internet sites

I am starting a pilot on Version 4.1.1a.10 and have 15 sites.
A small site w/ T1 has a majority of the bandwidth being consumed by....you guessed it HTTP web traffic! So, The question is
If I deploy an Core WAE in my DC at the inside of the "Surf" firewall, Will the user behind the Edge WAE in the branch really feel the benefits when browsing internet sites? Does this new Feature in 4.1 attempt to mitigate in some small way the need for caching servers? Connection reuse is a major component here but how well will this function on a HTTP site outside of the Data Canter?
Thanks in advance
Todd
Most of the discussion for HTTP acceleration has been for internal HTTP sites.

So, My interpretation of that statement is yes a little bit. It will reduce the latency between the internet Access point and the customer LAN. but what about connection reuse for internet sites? If the remote site goes to Facebook every day ( for busness use lets say) will a core WAE optimize(reduce latency) and use DRE cacheing techniqes to improve performance to that site.

Similar Messages

  • Sharpoint 2010 architecture for internet sites..

    Hi,
    we are trying to build a new fresh sharepoint  2010 farm for internet sites(not intranet). Can some one please help me know what needs to be considered when creating a fresh sharepoint 2010 farm for internet based sites.
    Cheers,
    Kotamarthi Veera

    Refer to this post on design recommendations to create a internet facing SharePoint site
    http://technet.microsoft.com/en-us/magazine/gg457886.aspx
    http://designshare.wordpress.com/2012/11/14/internet-facing-sites-with-sharepoint-2010-tips-tricks-gotchas/
    --Cheers

  • Skip Webbproxy Pop Up for Internet sites iViews

    Hallo,
    we use EP 7.0 SP9.
    Our customer has a special security feature: Users need username/password to connect to the Internet. When they open the browser a pop up appears. After typing in their username-password they can view the Internet-site.
    We created some Internet URL-iViews. When we go to these sites, the pop up appears.
    Has anybody got an idea how we can skip the pop up window???
    (We could use a general username/password for authentication).
    Thanks
    Antje

    You might want to look into configuring the portal as such:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/8abf9e0ce011d7b84900047582c9f7/frameset.htm
    Note the serverside fetch property setting in your iView.
    Hope this helps

  • SharePoint 2010 Session issue for Internet site

    Hi,
    We have migrated one application from MS.net to SharePoint 2010. Session is used allover application. The issue is, when we are using this site from Intranet, session is working absolutely fine, but when we use this site over Internet, Session is getting
    null frequently for both FBA & windows authentication. 
    We have enabled session in web.config as below :
    <sessionState mode="InProc" timeout="600" cookieless="false" />
    & one more point i would like to add is, our internet site is on different port(extended port). We have cross-checked web.config from both port to resolve this issue, but nothing helped us out. 
    Please help..!!!

    Hello,
    Just try to enable session state in SP server. You may run below powershell command:
    Enable-SPSessionStateService -DatabaseName [-DatabaseServer ] [-DatabaseCredentials ]
    Later edit each web app web.config file (from virtual directory) and set the enableSessionState property of the pages element as follows: <pages enableSessionState="true"
    http://blogs.msdn.com/b/markarend/archive/2010/05/27/using-session-state-in-sharepoint-2010.aspx
    Once you done then see the result
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How do I add a password for internet sites so that my kids can not just go where they want to go?

    This is a computer strictly for school. I do not want my child to be able to browse the internet with out my password being put in so that I know where he is looking.

    Adobe Reader cannot change security options. There is nothing you can do, when creating the PDF, to change this.

  • Analysis Trace -- HTTP Plugin for Internet Explorer 8

    Hello,
    We have configured E2E Root Cause Analysis, and we are trying to use "Trace Analysis".
    We have download HTTP Plugin that is attach in Note 1041556, but in this note we have found that this plugin is for IE 6 and IE 7, and in our customer we have IE 8.
    Do you know if we can use this HTTP Plugin with this version of IE? Is there any specific plugin?
    Many thanks in advance,
    Esther

    As I was searching for an answer on this question here, I got a reply back from my message to SAP on this topic(I'm not the original poster of this question).
    SAP support told me that they do not support IE8 with the SAPClient plugin for the present moment and could not tell me when a future version was planned with support for IE8.
    I wanted to share this with everyone here, as I know it will be common question in the future.
    Take care,
    Stephen

  • Disable HTTP Methods for SharePoint site

    Hi,
    Our firewall is reporting that someone is trying to use HTTP OPTIONS Method to exploit our SharePoint server.
    I want to know which HTTP methods are required by SharePoint 2010 so that i can disable other HTTP methods to increase security.
    I am trying to follow recommendations from Open Web Application Security Project. 
    https://www.owasp.org/index.php/Test_HTTP_Methods_(OTG-CONFIG-006)
    Regards, Muhammad Usman Azmat

    Verbs such as OPTIONS will require authentication to be of any use. If you disable OPTIONS, you'll likely run into various issues using SharePoint, and here is an older example (that will likely apply even today):
    http://blogs.msdn.com/b/vsofficedeveloper/archive/2008/10/03/sharepoint-cisco-css-switch-issue.aspx
    At any rate, changing IIS settings at the Web Application IIS site level, with the exception of IIS Site Bindings where appropriate, is highly discouraged.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • URL iview issue for intranet sites

    Hi Guys,
    I am creating a simple url iview for one of our Sharepoint site. when I preview the iview it works fine. but when I assign it to some Role, it doesn't load. "Page cann't be displayed" error comes. Some prefix with the text  "res://ieframe.dll/dnserror.htm#" added it the url.
    At the same time when I create url iview for internet sites they works. I have checked the Proxy settings and browser setting but no help.
    Please suggest if you something to try ?
    Regards
    Amit

    Hi Amit,
    Can you check the NWA Logs --> Default Trace to see if there are any log messages captured for this error. And analyse them.
    Also run a HTTP trace to check if the request calls generated. See if the Sharepoint URL is getting called or not. And status of response from that.
    Looking at the error, would suggest you to check the host names used on the URLs, should be FQDN.
    Also if your browser is IE8, may also want to add the portal and sharepoint domains to be shown in compatibility view. Can do this from Tools --> Compatibility View settings.
    Finally below is a help link to set up iViews in portal for sharepoint. Can refer to this and check the steps done at your end.
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0489149-5c93-2a10-8aaa-da1cd0b6edf3]
    Thanks,
    Swapna Priya.

  • What is the best approach to setup intranet and internet sites in SharePoint 2013?

    I am planning to setup a internet and intranet website for one of our client.  What is the best approach to setup this kind of environment?
    Some of the users (registered users) from the internet should be able to access information in the intranet site.  I have created two web applications for intranet and internet.  Is it the right way to go forward?
    Thanks in advance! :)
    LM

    Hi Laemon,
    Creating two separate web applications, one for Internet site and the other for Intranet is the right thing you have done.
    1. To properly plan creation of your web application, site collection and website is of utmost important to ensure you build your site in a professional and most recommended way. Go through this article from Technet that would help you plan your site in
    SharePoint 2013.
    https://technet.microsoft.com/en-us/library/cc263267.aspx
    2. Planning and choosing the right authentication type is also a very important decision. I recommend you to go through the below article if you have not already gone through.
    Plan for user authentication methods in SharePoint 2013
    3. Plan for licensing for your SharePoint 2013 Internet Facing Website.
    Licensing Internet Sites Built on SharePoint 2013
    SharePoint 2013 licensing for Internet facing sites
    4. To grant access to registered users to Intranet site (as you mentioned in question), if you created both web applications in same farm (same domain) then that would be easy to grant access using Site Permission with Windows Authentication enabled for
    both web application. If both web applications are created on different domains then If there is a two-way trust in place, and the SharePoint servers have the necessary port access to the remote domain's Domain Controller, then it is automatic. If it is a
    one-way trust, then you need to follow these directions:
    http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
    If there is no domain trust in place, then you either need to create one, or look at alternative technologies,
    such as ADFS.
    Please remember to upvote if it helps you or
    click 'Mark as Answer' if the reply answers your query.

  • WAAS 4.1.1c and HTTP acceleration

    HTTP acceleration graphs remain empty. What is the cause of this ? Is HTTP not accelerated now?

    Just an FYI but there is a bug associated with 4.1.1c and the HTTP accelerator.
    CSCsv69306-Under certain conditions, HTTP clients whose connections are being optimized by HTTP accelerator can experience slow response.
    I had to disable the HTTP accelerator for all my devices but I am now running 4.1.1d and it is enabled.
    Regards

  • How to provide internet access for a site collection in SharePoint Foundation 2010

    Hi all,
    I am working on SharePoint Foundation 2010. I have to make a site collection available on internet.
    Only one site collection is to be brought on internet rest of the site collections should not be accessible from outside.
    How do I achieve this. Any help is greatly appreciated.
    Thanks in advance.

    Hello,
    As per my knowledge, you have to create new Web Application for your site to publishing it to internet. Since internet settings can be done at web application so create new one and then backup your existing site and restore in new web app.
    You can refer below thread for licensing:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/b63b3643-d0c7-45d2-8372-364fda348ed0/sharepoint-foundation-licensing-on-internetfacing-server?forum=sharepointgeneralprevious
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • What is code fix for Internet Exp. 6 and 7 for my site?

    My posted site <cumccda.org> is not presenting
    correctly in Internet Explorer 6 and 7. I was under the impression
    that Dreamweaver automatically put in code to make a site work
    correctly with the new CSS in the older browsers of I.E.. Am I
    wrong? If not, what is my code missing in order for my site to
    display correctly? Thanks for your concern.

    > Am I wrong?
    Yes.
    > My posted site <cumccda.org> is not presenting
    correctly in Internet
    > Explorer 6
    > and 7
    What are the problems?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Manic Mama" <[email protected]> wrote in
    message
    news:gq8q3c$obr$[email protected]..
    > My posted site <cumccda.org> is not presenting
    correctly in Internet
    > Explorer 6
    > and 7. I was under the impression that Dreamweaver
    automatically put in
    > code
    > to make a site work correctly with the new CSS in the
    older browsers of
    > I.E..
    > Am I wrong? If not, what is my code missing in order for
    my site to
    > display
    > correctly? Thanks for your concern.
    >

  • HW acceleration (direct2d) causes problems for my site , is there a script to disable it automatically?

    direct2d acceleration on FF4 causes really bad font rendering problems for my site.
    Text goes on to of each other and behind pictures making it impossible to read for some parts. Disabling HW acceleration fixes the problem. Is there a script that I could use to disable it automatically for my site?

    In fact updating my graphics was the cause of the problem. With the old drivers there were no problems. It depends on the system. So far I've tested on 6 Windows PC's. on 2 of them it worked fine. My site should be 100% W3C compliant. It works fine on 3.6, Chrome, IE and Opera

  • Ad page for one site won't display, but works fine with Internet Explorer

    Main page of one site displays fine, but ad page won't. Works fine under Internet explorer. Didn't have problem before.

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove your live.com cookies (save any pending work first) using either of these. While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • How do I adjust the HTTP server receive timeout for one site on Ironport S670

    Hi All,
    How do I adjust the HTTP server receive timeout for one site on Ironport S670?A web based application can take a long time (45 to 60 minutes) to fill a form once a user Login.The proxy will timeout the connection before the result comes back.How do I resolve the issue?
    Thanks

    Sandeep,
    There is no option to adjust timers for one specific website.  Any changes will affect all websites.  The setting is under Security Services > Web Proxy.  If only one site is being problematic for you, I'd recommend you consider bypassing it.
    Is this an HTTPS site?
    You may want to open a TAC case and have them take a deeper look into this.
    -Vance

Maybe you are looking for

  • Preserving folder organization (directory structure) when importing...

    Hello. I've spent years meticulously organizing a growing collection of about 10,000 photos. There are many subfolders (nested up to 4 deep). I'd like to start using iPhoto while preserving this organization. The catch is, I do not have enough free s

  • Best practice recmmendations for backups

    Hi, I wanted advise from senior basis consultants on backup strategy. Here is a summary of our environment: We have 6 SAP servers, with more than 1 SAP system installed per server. The SAP systems include CRM, SRM, XI, Portal, Solution Mgr, ERP , R/3

  • Display Tree node label/title on page

    I'm using Apex version 4. I have a tree and I want to display (below the tree) the label or title of the node value that's selected. So my tree query is like: SELECT (case when connect_by_isleaf = 1 then 0 when level = 1 then 1 else -1 end) status, l

  • Trouble connecting to external server with 10.9.2

    So despite all my complaints about Mavericks 10.9 and 10.9.1, I was at least able to mount my GoDaddy server on the disk. Although whenever I restarted the computer, I had to run the mounting program/script again. But now, with 10.9.2 it has stopped

  • ITunes visualizer with 2 monitors

    Hi, I have two monitors and I want to put iTunes in the secondary one and activate the Visualizer in full screen so that the secondary monitor only displays the CD covers while I work on something else in the primary one. My problem is that when I ac