HTTP adapter question - how to tell what URL was used in the runtime

I need to know the URL information used when sending via HTTP adapter. I cannot find this information in the SXMB_MONI trace under SOAP header or in any other place.
THanks,
Pam

Never mind....I found the log in ICM monitor

Similar Messages

How to tell what version of a document the workflow ran against?

I am using the OOB Approval workflow and in the workflow information I see a Document field, but that links latest version of the document. How can I tell what version of the document the workflow actually ran against?

Hi,
Set a variable in the workflow to be equal to the version of the document.
Now you can use this variable to update a column in the document library with the version and date the workflow was ran. Next time the workflow runs, update this column with next run details.
OR write this variable to workflow history. Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

How can I tell what setting was used to create a received PDF?

I get PDFs all the time and I can't find a way of knowing if the PDF was created using Press Quality, Standard, Smallest File size other than just looking at it and zooming in.
Is there a menu item or trick that will tell me how this PDF was created?

The image was almost 9 inches by 7 inches at 300 ppi and I reduced it to about 3 inches wide in my document. I almost never blow-up images unless they can take it without losing resolution.
Maybe I'm not looking in the right place. I went to preflight > sheetfed offset, clicked on Analyze and got lots of readings. The one that said "Resolution of color and grayscale images is less than 150 ppi. This might be insufficient for proper print results." is the one that threw me.
It's too bad that I just can't read how the file was created. Most of clients I deal with make PDFs and never look at the settings they use. I'm in the printing business.
I've just been looking at the PDFs sent to me and zooming in to see if they'll hold up but I'd really like something more accurate.

Templates - how to tell what target is using what template

Trying to figure out who or what target is using what monitoring template? Anyone can suggest a way? Are only groups use monitoring templates?
Thanks
Roman

Hi,
As far as i know, you can find out this. Monitoring template is a template which you create and then apply to targets (so that you avoid setting metrics for individual targets one by one). You can apply a template on a single database or on a group by adding all databases in a group. Once you apply template, template metric thresholds will be set for that target based on the template and still you can modify certain metrics for this target. So it means that on a single target you can have metric set through template and also set manually thus it is not possible to find out what was implemented through template and what was done manually.
Salman

Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc. So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made. I don't want to introduce issues by mass-recompiling to the latest version.
What is best practice in this case? I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
Any ideas?
Solved!
Go to Solution.

The report is a great idea! I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason. Those files have sure come in handy!
Also- its a good idea to make an image of the target as accepted and archive it somewhere. ESPECIALLY for PXI based systems from NI. (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
Jeff

Is there a way to find out what computer was used to make an order

I found some charges on my account that I did not make assuming that it was either my 14 year old son or soon to be ex-husband, is there a way to tell what computer was used to make the order?

rbailey60 wrote:
Last update was 3/3/2011 which was the itunes update. So the problem must be w/the itunes update. Does anyone know how we can contact MAC to tell them of this problem?
It's highly doubtful there's a general problem caused by that update, or the forums would be full of similar posts. More likely, it's specific to your setup somehow.
Have you Restarted your Mac lately? If not, that's always worth a try.
Then, make sure there isn't a problem with the file system on your internal HD. Verify it, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).
If that's ok, then as GfulDedFan says, run +*Repair Disk Permissions,+* per #5 there.
If that doesn't help, try connecting to your router via Ethernet cable instead of wireless, to rule out interference problems.
If you have the same results via Ethernet, you can make an appointment at the Genius Bar of your nearest Apple Store: http://www.apple.com/retail/geniusbar/
Or call AppleCare at: (800) APL-CARE (800-275-2273)

What Universe was used to create a report?

Is there any way to tell what Universe was used to create a specific report, Also is there anyway to tell what Universe connection a specific Universe is using?
Thanks
jeff

Hey Ted,
Thanks but I got an error when I tried to do this. Here is the query that I used. Any thoughts?
Select * from CI_APPOBJECTS WHere SI_KIND='Universe' And SI_CUID='<ASBJCyAKjL1FhG1pNAMsor4>'.
and here is the error
A potentially dangerous Request.Form value was detected from the client (sqlStmt="... SI_CUID='<ASBJCyAKjL1FhG1pNAM...").
Description: Request Validation has detected a potentially dangerous client input value, and processing of the request has been aborted. This value may indicate an attempt to compromise the security of your application, such as a cross-site scripting attack. You can disable request validation by setting validateRequest=false in the Page directive or in the configuration section. However, it is strongly recommended that your application explicitly check all inputs in this case.
Exception Details: System.Web.HttpRequestValidationException: A potentially dangerous Request.Form value was detected from the client (sqlStmt="... SI_CUID='<ASBJCyAKjL1FhG1pNAM...").
Thank you!
jeff

How to tell what codec has been used??

Hi
Just wondering how to tell what codec a particular video clip has been encoded in? I cannot see it anywhere in bridge. after fx dos it for some but not all clips.
cheers
angus

if you're using Loader to load the swfs, you could examine e.contentLoaderInfo.url to see which swf it is

How to tell what has been downloaded/installed on iphone 4s

how to tell what has find and read hidden log filesa/programs on iphone 4s

Again, it's not universal. It's not a feature of any cell phone I've ever seen in the U.S. And, it's not a feature of the iPhone.
Submit feedback to Apple requesting such a feature here:
http://www.apple.com/feedback

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

Icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green..

How to tell what template is applied to a Framemaker file?

I'm new to Framemaker...so please excuse if this is a silly question.
We are trying to figure out how to tell what template has been applied to a Framemaker file. We are using the structured view in Framemaker 7.2.
Perhaps I am thinking too much like a Microsoft Word user -- in which case I can look at what template has been applied to a document.
Does Framemaker work the same way -- or are templates associated with Framemaker files in some other way?
Thank you --
J-Ha

J-Ha,
FrameMaker works differently. Strictly speaking, there is no way to tell which template was used last. A FrameMaker template is just a FrameMaker document which you call "template". Using File > Import > Formats you can import all or selected formats from one document to another. The main benefit: Each document is completely self-contained and does not require any other document.
Many solutions I know of include a user variable named something like "template-version" into their template document or put the version information on one of the reference pages. When importing user variables or reference pages, this can tell you version imported last.
- Michael

How to tell what data is being transferred

We have an Iomega StoreCenter ix2-200 and it is constantly busy doing something but we can't figure out what its doing. Is there some way where we can tell what files are open on the device? The blue light is on all the time.
We have this unit shared and we back up 5 computers to this unit but those backup schedules don't start until 5pm which I've verified on each of the PC's.
There are only the 5 PC's that are on this network that can see that NAS. The backup schedules are working fine, The data is backed up on the NAS without issues.

I would just recommend turning off any protocols or utilities that you do not currently use and make sure that Security is enabled and that the correct access permissions are set for your shares just to be sure. You can also refer to: Security Best Practices Guidelines
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

TES 6.1.x - how do you tell what DB is used by ClientMgr?

We just externalized the Client Mgr DB to Oracle, updated config files, etc. How do you tell what db is using - Derby or Oracle?

After you externalize the CM database, you should see the db objects (tables and views) in the database are now created shortly after you start the CM service.
You can verify creation of database objects in the actual database and in the plugin log upon start-up. This log can be found under the ../ClientManager/plugin/tes-6.0/log directory
John

How to tell what packages have recently run

Occasionally, after start up, I'll see something that looks like a package that quickly runs. I have no idea where to look for information to figure out what ran. I've ran searches trying to find out how to tell what packages have recently run but have not found anything useful. If anyone knows or has any ideas on what I can do to figure that out, I'd love the help.

You are welcome. Based on my experiences, the only time I look at Console is when something is not working. You could get overly engrossed trying to figure out what everything means.

HTTP adapter question - how to tell what URL was used in the runtime

Similar Messages

Maybe you are looking for