HTTP and HTTPS connections time out--only one computer on the LAN has this problem. Also affects Internet Explorer

For the last few days HTTP and HTTPS connections on one computer on my LAN usually time out or fail to load completely. This also affects Internet Explorer on the same machine, but email, FTP, etc. seem to be working normally. The URLs that do not load in the browsers ping normally, and load normally on another machine on the same LAN. Running Firefox in Safe Mode does not help.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Similar Messages

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air. My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi. Any suggestions?

I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?

It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.

BPC: SOA and setting connection time outs in BPC

Hi All,
can any one explain SOA architecture of BCP and how it improves performance?
My understanding of SOA arcitecture is it breaks down large application into small modules called services.
Here what are the services it is refering to?
And in SOA arcitecture, is the client connected to server only when it requests for a service and connection terminates after the service is provided?
If that is the case, what is the need for setting connection time outs to improve BPC performance.
Any Help is Greatly appreciated.
kranthi kumar

SOA = services oriented architecture
is a method for systems development and integration where functionality is grouped around business processes and packaged as interoperable services. SOA also describes IT infrastructure which allows different applications to exchange data with one another as they participate in business processes. The aim is a loose coupling of services with operating systems, programming languages and other technologies which underlie applications.[1] SOA separates functions into distinct units, or services[2], which are made accessible over a network in order that they can be combined and reused in the production of business applications.[3] These services communicate with each other by passing data from one service to another, or by coordinating an activity between two or more services. SOA concepts are often seen as built upon, and evolving from older concepts of distributed computing[3][2] and modular programming.
So SOA is not implemented for performances reason and it is more for integration.
Regards
Sorin Radulescu

HT1386 I have been syncing my IPad to only one PC computer successfully for over a year. Now when I try to sync I get the message that the ipad is synced with another computer and can be synced with only one. How can I correct this?

Although I have synced my ipad to only one PC computer I now get the message that it is synced to another computer and only one computer sync is permitted. I have lots of apps on the ipad and do not want to loose everything by starting fresh with the ipad. How can I get the ipad to again accept my computer and sync successfully?

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Connectivity issue from only one computer

Let me start by saying i have 10 servers and about 15 workstations on this network. only one computer (my main computer) has this issue. all other computers work as they should.
This problem started to happen recently and randomly affecting RDP connections to 2 of 10 servers and now affects 5 of 10 servers. I am not sure i did anything to make the problem worse. Additionally I at first suspected it a DNS issue as connecting to the
ip address of effected computer as opposed to host name allows connection but as I said the issue is only on one computer. Looking at the logs below i am stumped.
ELECTRO4UBLADE
20499
Warning
Microsoft-Windows-TerminalServices-RemoteConnectionManager
Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin
3/18/2014 9:39:45 AM
Remote Desktop Services has taken too long to load the user configuration from server \\ADDS1.PDX.DAVISDARVISH.COM for user davis
RDPClient_SSL: An error was encountered when transitioning from TsSslStateDisconnected to TsSslStateDisconnected in response to 25 (error code 0x8000FFFF).

I'm experiencing the same issue, intermittently, when remotely using two of our eight SBS 2003 network computers via Remote Web Workplace. The two SBS computers are Windows 8.1 Pro 64 bit machines.
Intermittently, the RWW connection is lost and I'm returned to the RWW page with the message "VBScript Remote Desktop Disconnected...an internal error has occurred.
When the issue occurs, the Event logs on both SBS computers contain the Event ID 20499, Remote Desktop Services has
taken too long to load the user configuration from server XXXXX. The event is logged at the time the RWW connection is lost.
As the issue occurs with RDP sessions to Windows Server 2012 R2 (based on reports from others) and, in my case, SBS 2003,
perhaps the common element is Windows 8.1.

HT201413 when i installed itunes in my old computer it would disable my CD burner and I was only able to burn through itunes. has this problem been resloved or will i have the same problem when i download it into my new computer?

When I installed itunes into my old computer (loaded with Windows Vista) it deleated my CD burner and would only allow me to burn via itunes - I had to go in to Best Buy to have them fis the problem but was told not to download new updates for itunes or it would do the same. with this fix I am not able to burn CDs from itunes which is a bummer. If I download itunes onto my new computer (loaded with Windows 7) is it going to do the same thing or has this problem been resolved?

Copy them from your old computer, or your backuo copy of your old computer. to your new one.
The music sync is one way - computer to ipod. the exception is itunes purchases.

Sharing a folder with only one computer on the network?

I have a local network with one OSX.6 server and eight workstations in the office and two more using VPN). The server has one shared directory for use by all workstations - that directory automounts when each in-office workstation is rebooted. Each workstation has a different computer name and account name.
All workstations have full access to the office directory.
I have been asked to create another directory on the server that can only be seen and accessed by one computer in the office (and eventually two others via VPN). I can easily create the new directory and share it with the entire office, but I cannot seem to make that directory available to only the three computers - it is all or none!
Obviously I am not a unix junkie and I need help here.
Thanks,
Marty

It has been a couple of days. I sure could use some help with this.
Does anyone have a hint as to what to even try?
I can take the scorn and ridicule of not knowing (because it is probably something simple).

No Internet acces or only one computer at the time

Hi everybody,
I'm a freelance IT supported and I'm new to Apple. I studied and always worked with PC but with people having more and more Mac at home I had to adapte.
I have a problem at a customer's place which is kinda hard to explain. I'm unable to get Internet access on any devices connected to the WIFI. I tryed sevral setup and the best I can get is "one-device-at-the-time" (the last device that connects to the WIFI). I did screen captures of this setup.
The setup isD-Link DSL-320B Modem (set as DHCP) --> AirPort Extreme (WAN Port) --> wireless devices (iMac, iPad, iPhone, PC, etc.)
Unfortunatly, all the screen captures are in French (I'm in Switzerland) but since it's not literature, I think you can all get what's writen bellow.
mode pont = bridge mode (I think this is how I actualy got one computer to access the web)
I don't understand why the address is 169.254.xx.xx. Shouldn't it get a 192.168.1.x since the D-Link is setup as DHCP (see next screen capt) ? The DNS servers are the ones provided on the ISP info sheet but I don't think it's necessary to put them here, right ?
strangely, the IP range didn't show up when I did the screen capture but it's 192.168.1.2 to 192.168.1.254
I spent two unsuccessful hours last time, i'd realy like to make it right next time so I can actualy send them an invoice and eat more than pastas ;-)
thanks for your help,
Julien

Hiya.. thanks for the lovely screen shots.. this is hard and would be impossible without them.
Something odd is happening... I don't see anything wrong with your setup.
What I do see is dlink doing its dinky toy dlink type stuff.
The AE should have got an IP from the dlink. 192.168.1.x and as you have it bridged it should also pass packets to the dlink which would get IP for the wireless.. nothing wrong in any of that.
It is failing .. and obviously not passing packets correctly on the ethernet link to the Dlink.
DHCP discovery at the very least is failing..
Look at your last screenshot of the dlink setup. Look at the IP handed to the AE. 83.79.62.39
Where did that come from.. it says the AE is a client but the IP is some odd thing.
Now did you happen to set the AE in DMZ of the dlink or did you use some other method to try and force this to work.. at some point it is passing .. perhaps an old public IP to the AE.. which is not correct.
Your tech-it-easy computer plugged into the dlink is getting the correct LAN ip 192.168.1.2 clearly the AE has failed.
I recommend you reset the Dlink to factory and redo the setup.
If the ISP uses PPPoE, then setup the dlink in bridge mode and run the PPPoE client on the AE.. this is the best method.. but PPPoE is seldom used in Europe for whatever reason.
If you use pppoa or ipoa or other dsl authentication then you must keep using the AE in bridge.
Go back to the fundamental problem.. it is not passing packets over ethernet correctly. The AE is gigabit unless it is very old. Dlink I am guessing is 100mbit. There are occasional hitches.. if you have a switch 10/100 drag it along with you and plug it between the dlink and the AE.. and see if it then gets IP correctly. Check with another ethernet cord.. all the stuff you know.
In the AE you can set wan port speed.. but you will need the AE in router mode.. ie it is NATting a public IP, but you will get double NAT.. as a test you can go for that.
Use 100mbps full duplex.
Of course you don't want to double NAT permanently.
If you don't make progress.. post again..
There is a manual way of bridging the AE.. we normally call it wan bypass.
It is complicated so try the above before you do that.
BTW,,, when the one computer does work, check what IP it is getting.. is it 83.79.62.39.. or whatever the public IP. If so the AE is definitely set wrongly in the DMZ of the dlink.

I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out. Is there another way to fix this problem? Cheers

I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out so this is not an option. Is there another way to fix this problem? Cheers

The only way is to connect the iPod to a computer with has an internet connection and iTunes and restore the iPod. Use as friiend's computer or make an appointment at ther Geniuds Bar of an Apple store.

HT1420 i used 3 old computers for my itunes account that i do not have ANY ACCESS with anymore, that i want to de-authorize.... can i do that without the computers and does it wipe out my existing computer at the same time?????

i used 3 old computers for my itunes account previously, that i have no access to de-authorize now..
can this still be done with my existing computer, and does it de-authorize the current one, so that i would have to re-load it????
the original 3 computers are long gone, in-active....

Individual computers can only be deauthorised directly on them, but as you have more than one computer authorised then you can log into your account on your computer's iTunes via the Store > View Account menu option and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need. Deauthorising a computer doesn't remove any content from it, it just means that you won't be able to use any of the account's downloads on it until you reauthorise it.

I need activation reset on photoshop elements 9.0, my hardware on my primary computer. I now have only one computer I want to run this software on.

How do I reinstall Photoshop 9.0 on a new Windows 7 install? My activation max was reached, but I only have one new desktop computer I want to run Photoshop on.

If you have access to the other installations then open the program on them and choose Help -> Deactivate.
If you do not have access then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Connection timed out on website. Tried clearing cache/cookies. No proxy. Internet Explorer. Still unable to access. Please help. Website is working.

I get Connection Timed Out on these websites: energy-medicine-software.com and energy-medicine.info. I tried clearing the cache/cookies. I put in No Proxy. I tried Internet Explorer and still unable to access. I rebooted my computer. I know that this website is active because I contacted the webmaster and he says that it's active at his end. What else can I do to access this site? Thanks!

Make sure you install several add / mal-ware scanners and run them all
once in a while. Also;
It’s very sad, but many of the software down-loaders / installers will trick you
into installing not only their program, '''but other programs as well'''.
You have heard of the '''fine print in shady contracts''', right? Well, some
installers you need to look at the '''itsy bitsy teeny weeny fine print'''.
You are thinking you are giving the installer permission to install the program
you want by using the '''recommended''' option. But if you use the
'''Manual Option Instead''', you discover all kinds of stuff that
'''you do not even know what it is or what it does'''. From now on,
everyone needs to '''Use The Manual Option''' to put a stop to this.

How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

See [[Firefox keeps opening many tabs or windows]]

HTTP and HTTPS connections time out--only one computer on the LAN has this problem. Also affects Internet Explorer

Similar Messages

Maybe you are looking for