'HTTP Code 404 : Not Found' in SE80

Hi,
I have consumed WSDL using consumer proxy in SAP system. Now I am trying to test this proxy.
But, getting error
Error when calling SOAP Runtime functions: SRT: Unsupported xstream found:
("HTTP Code 404 : Not Found")
I have maintained correct URL and port, computer name in SOAMANAGER, still I am getting this error.
Please advice.
Regards,
Sneha Nikam

Hi Sneha,
Please check if you created logical port in SOAMANAGER and same logical port is used in the proxy class.
please also check below discussion
Re: Error when Consuming Service in ABAP
regards,
Harish

Similar Messages

SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 404 : Not Found")

Dear expert,
When i run sap call .net web service ,it occurs error:
SOAP:1,008 SRT: Couldn't create Object: ("ICF Error when creating object for HTTP DESTINATION "tempuri.org": DESTINATION NOT FOUND")
Exception of class CX_AI_SYSTEM_FAULT
Could you please tell me how to do?
Looking forward to your reply.
Best Regards,
Merry

Hi Merry,
Did you create a logical port (using transaction code SOAMANAGER) for your client proxy & add the necessary configuration pointing to the .NET web service?
Also, if the logical port is configured, make sure that the URL ( for WSDL with endpoint) that you've specified for the logical port is correct. Error 404 generally means that you have made contact with the service provider but it can't find what you're looking for.
As a quick sanity test, you can run a test request to the service provider using a free tool SoapUI just to make sure that everything on the provider side is ok (i.e. they have provided correct WSDL with binding)
In future, please post this type of question in the SOA forum, see URL below, that's the correct forum for it. Thanks:
Service-Oriented Architecture (SOA) and SAP
Regards, Trevor

Received HTTP response code 404 : Not Found

I am attempting to pass a file through XI into an IDoc to ECC. I have tested the mapping, and that works fine. I have also tested the configuration in the integration builder and it seems to be fine. However, when the file is picked up by XI from the directory, processed by XI, and then sent to ECC, an error occurs in the runtime workbench:
Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
The error leads me to believe that the system cannot be found, or there is a privelage issue with the service user attempting to log onto ECC. However I believe I have set up the RFC connection correctly, and the service user should be fine.
Does anyone know what may be causing this? I am using the IDoc adapter for the reciever communication channel. I have set the RFC destination (and tested it in SM59, works fine) and the port (I assume this is the port in WE21?). Not sure where to look...

Being that the error says:
Transmitting the message to endpoint http://server:port/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
I am trying to understand what this means. Can anyone explain to me why the message is getting sent to this address? I assume that the AFW is coming into play because I am using the IDoc adapter, hence the adapter framework. Is this true? Should the AFW be showing up, or do you think there is another issue?
Mainly I want to know if this is more of a basis issue, or a configuration problem with the interface in XI?

Java.rmi.RemoteException: HTTP Status-Code 404 Not Found securesimple/Ping

Hello!
I'm testing interop and simple application for JWSDP and I get the following error in the context:
build-client:
run-sample:
[echo] Running the simple.TestClient program....
[java] Service URL=http://localhost:8080/securesimple/Ping
[java] Nov 4, 2004 1:31:54 PM com.sun.xml.wss.filter.DumpFilter process
[java] INFO: ==== Sending Message Start ====
[java] <?xml version="1.0" encoding="UTF-8"?>
[java] <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/".............
[java] </env:Body>
[java] </env:Envelope>
[java] ==== Sending Message End ====
So, after the client has send the message this error occurs:
[java] java.rmi.RemoteException: HTTP Status-Code 404: Not Found - /secures
imple/Ping; nested exception is:
[java] HTTP Status-Code 404: Not Found - /securesimple/Ping
[java] at simple.PingPort_Stub.ping(PingPort_Stub.java:96)
[java] at simple.TestClient.main(TestClient.java:37)
[java] Caused by: HTTP Status-Code 404: Not Found - /securesimple/Ping
[java] at com.sun.xml.rpc.client.http.HttpClientTransport.checkResponse
Code(HttpClientTransport.java:302)
[java] at com.sun.xml.rpc.client.http.HttpClientTransport.connectForRes
ponse(HttpClientTransport.java:252)
[java] at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpCl
ientTransport.java:88)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:92)
[java] at simple.PingPort_Stub.ping(PingPort_Stub.java:80)
[java] ... 1 more
[java] Exception in thread "main"
[java] Java Result: 1
The application is running on localhost in a local network, so for accesing internet we're using a proxy. For this we tried to set up the proxy configuration and still the same error. We've also unplugged the network cable but it didn't help.
We've done all the neccesary settings and we're using "org.bouncycastle.jce.provider.BouncyCastleProvider " as a JCE provider.
Thank you!

Just a guess, but if this is a secure web service shouldn't you be trying to connect to it using SSL? e.g.
https://localhost:443/securesimple/Ping
Have you tried hitting the web service via your browser and appending the ?WSDL to the URL
http://localhost:8080/securesimple/Ping?WSDL
https://localhost:443/securesimple/Ping?WSDL
Can you telnet to http://localhost:8080

Help: Received HTTP response code 404 : Not Found

Transmitting the message to endpoint http://chmsxd42:52200/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
Our senario is a simple file transfer one, no object has been created in IR.
While we run the wizard, we just put the dummy interface name and namespace in the interface and namespace blanks.
After we activate the objects, the source files were picked up and deleted but there is no file created in the target directory, and we got the error message listed at the top.
Does anyone has some clue about this? Please help.
Thanks a lot.
Aditya Babu

Hi,
The port of Integration Engine is 80XX, and so 8001.
In the SLD you must to select the Business System of XI and there you can just set the corret Pipeline URL.
It means you AE is unable to communicate with IE.
t-code SMICM..check the HTTP port No:
open the SMICM code...just right click anywhere in the window...then click on the Services..it will show u the HTTP and HTTPs port no.
THen from SLD --Business Landscape --your Business System..chek the Pipeline URL http://<host>:<port>/sap/xi/engine?type=entry
the HTTP port that u will see in the SMICM should be same in the pipeline URL
Have you checked this one,...
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Go through this link which as the information of all HTTP errors in XI
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Thanks
Vikranth

Error: CIM_ERR_FAILED: HTTP response code: 404 Not found

Hi, we had finished to install Sap Netweaver Usage type PI (Abap +Java), now we are running Post Installation task, but we are getting an error when we ran "Configuration Wizard"
In the step: Configure the integration server for sld
Error: CIM_ERR_FAILED: HTTP response code: 404 Not found
Any Idea?
Thanks
Elias Mendoza
The following lines are part of the error log:
Debug Events
InvokeService:Configure the integration server for sld
Library: sap.com/tclmctctemplateslevel1_4_tcc
SourcePath ./PIPostInstallProcess/configureIntegrationServer8
Time 2008/07/07 at 20:47:33
WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
Execute Java Service
Library:sap.com/tclmctcutilbasic_ear
Class:com.sap.ctc.util.SLDConfig
Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
InvokeService- Result: Failed
Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException

Dear
Possibly CIM content is not uploaded to your SLD.
Is your SLD running properly ?
Did you install this SLD as a local SLD at the installation of your SAP system (along with other stuff using sapinst) ?
<removed_by_moderator>
Kind regards
Tom
Edited by: Julius Bussche on Jul 8, 2008 1:55 PM

CIM_ERR_FAILED: HTTP response code: 404 Not found

Hello!
We are installing NW7.0 PI with local SLD as HA system with virtual name and after patching it up to SPS17 we started Configuration wizard
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
and on step 33/142 Configure the Integration server for sld we got an error:
CIM_ERR_FAILED: HTTP response code: 404 Not found
and from log:
InvokeService:Configure the integration server for sld
Library: sap.com/tclmctctemplateslevel1_4_tcc
SourcePath ./PIPostInstallProcess/configureIntegrationServer8
Time 2009/05/07 at 10:45:31
WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
Execute Java Service
Library:sap.com/tclmctcutilbasic_ear
Class:com.sap.ctc.util.SLDConfig
Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
Arguments
SID : XRQ
CLIENT : 001
HOST : capitate
PORT : 8032
SLDUSER : PISUPER
SLDPASSWORD : % secure content %
InvokeService- Result: Failed
Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException
Stacktrace
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:414)
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:323)
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
This error would be normal with Central SLD but we have local SLD. Is there any parameters for systems with virtual name which is not configured?
Regards,
Mart

Thanks for answering.
Configuration is done by the Post-Installation Guide - SLD of SAP NetWeaver 7.0 , but there is still same error.
It seems, that point is in CPA Cache full refresh, because in SLD Java system on app.server still shows his patchlevel 9 not 17 .
CPA Cache refresh gives an error:
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://capitate:53200/CPACache/refresh?mode=full'. Li...
CPA cache refresh (mode=full) successfully executed in 703 milliseconds.
^
Regards,
Mart

Getting HTTP response code: 404 Not Found while playback

Hi Folks,
Am creating a loadtest script on Oracle Empirica application by using web protocol with only 6 steps. While play back am getting the following error
Error Code:INVALID_HTTP_RESPONSE_CODE
Error Detail:
oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 404 Not Found
     at oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException.createErrorInvalidHttpResponseCode(ThinBrowserException.java:66)
     at oracle.oats.scripting.modules.http.api.internal.ResponseCodeValidator.validate(ResponseCodeValidator.java:21)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.validate(AbstractHTTPService.java:993)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.navigate(AbstractHTTPService.java:595)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:504)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:494)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1930)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1867)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1975)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1966)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2426)
     at script.run(script.java:153)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:320)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:726)
     at java.lang.Thread.run(Thread.java:619)
please help me to fix this issue.
Thanks,
Jay.

I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
Witch port must entered in the URL, 50100 or 8001?
If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
Thank you for all answers.
regards
Jochen Schütze

HTTP response Code 404: Not Found

Hallo,
I want to get a Email from the account to my SAP-System.
The Email is downloaded in the XI-System and then directly the following error is shown.
"Fehler beim Übertragen zum Endpunkt /sap/xi/engine?type=entry über die Verbindung AFW. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found".
What could i do?
Thank you.
Jochen Schütze

I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
Witch port must entered in the URL, 50100 or 8001?
If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
Thank you for all answers.
regards
Jochen Schütze

RecoverableException: Received HTTP response code 404 : Not Found

Hi All,
I am getting the below error while doing Scenario JDBC to ABAP Proxy.
Transmitting the message to endpoint http://XXXXXXXX:50000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
Can any body tell me:
1. Ideally what should be the port if it is an error due to Port?
2. I am not able to see the messages in SXMB_MONI?
3. What is the Flow of my message in the above mentioned Scenario I mean to say from which Engine to which engine?
Thanks,
RP

Hi Rajesh,
Do I need to mention Port 8XXX in my Pipeline URL " http://XXXXXXXX:50000/sap/xi/engine?type=entry"?
I have checked in
1. SMICM there is HTTP Service port 8XXX
2. SLD - PI Business System - Pipeline URL is "http://XXXXXXXX:50000/sap/xi/engine?type=entry"
3. In SXMB_ADM - Corresponding Integ. Server = "http://XXXXXXXX:50000/sap/xi/engine?type=entry"
Now tell me is these entries are Ideal??
Also is thr any place where I need to check for Port and URL??
Thanks for quick response.
RP

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

Content Server error on LINUX (HTTP error: 404 Not Found)

Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
Harshal

Hi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

Cannot download WSDL from .....Invalid Response Code: (404) Not Found.

Hi expert,
hcb-msap59 (PI system) & hcb-msap49 (ecc system)
When I try calling the ws navigator with this wsdl: http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101
it gives error :
Cannot download WSDL from http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101: Invalid Response Code: (404) Not Found. The request URL was:"http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101". Check, whether the URL is correct, and the Web Service that you are requesting is up and running
In http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/webdynpro/sap/appl_soap_management?sap-language=EN and go to technical configuration, system global settings, access information j2ee server, the hostname and port is of PI system.
Any idea why Im getting the error? If I click on http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101 the sire is opening.
Any idea why I cant open it from ws navigator of my PI system?
Thanks.
Regards,
Thava

Hi,
Can you access that URL when you paste it into your browser? You don't need to configure system global settings unless you want to go to PI's navigator automatically - you can always copy & paste the link after opening the wsnavigator in PI yourself as well. If you can access the link, kindly check your network & proxy setup.
Regards,
Gokhan

Status Code: 404 Not Found

Hi,
I have created simple REST Full services. It would validate the data and send it into a Queue. I have added a REST Client add-on's to my Mozilla browser . I got the following error when i test the rest full web services through Rest client .
Status Code: 404 Not Found
Content-Length: 1164
Content-Type: text/html; charset=UTF-8
Date: Mon, 08 Jul 2013 16:22:41 GMT
X-ORACLE-DMS-ECID: a26c3ae948dcd922:28156ab0:13fbd9dc11f:-8000-00000000000001fc
X-Powered-By: Servlet/2.5 JSP/2.1
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
Can anyone Help me out. I was struck here
Thanks,
Viswas
</HTML>

Issue has been resolved. There is no tric. My suggestion is before going to test any rest full service over the browser, If we test at sb console level at least we can trace the error.
you may get this fault when your web service has any syntax problem or validation problem or condition failing .so we can get this problem...
Thanks,
Viswas

"workflow.asmx" method The request failed with HTTP status 404: Not Found.

When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
Error details: {"The request failed with HTTP status 404: Not Found."} " at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)\r\n at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state)\r\n at System.Threading.ThreadHelper.ThreadStart()"

Hi,
For a better troubleshooting, I suggest you to do as follows:
1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
2. On client side you can also access Workflow.asmx from IE to see if it returns error.
3. Check the link below:
http://www.mail-archive.com/[email protected]/msg02092.html
If you want to operate the workflow in Client-Side, we can use Client Object Model in SharePoint 2010 to achieve it.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

'HTTP Code 404 : Not Found' in SE80

Similar Messages

Maybe you are looking for