HTTP Communication and View activation error

hi all,
We are using CRM WebUI. We have Product Master screens. In developement environment everything works fine. whee we migrated it to consolidation env i am getting following error.
Not able to understand this error. I get the HTTP Communication error ot the product search page and the Target view activation error when in product creation screen.
Please help!!
Cannot display view MainWindow
An exception occurred during the internal HTTP communication Exception Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text: HTTP answer has status 404
Additional Info: Business Server Page (BSP) Error
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 113
An exception occurred during the activation of target view OverviewMaterial.MainWindow for the navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View OverviewMaterial.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162

Hello,
a HTTP error of 404 means NOT FOUND.
Maybe you can have a look in the TX SICF if the BSP component is activated. Just search for the service = BSP application name.
cheers Carsten

Similar Messages

Https communication and authentication

Hi all,
I'm using JSSE and performing mutual authentication between client and server.
In that scenario, I have 2 https communication being established between the same client and server. Please let me know if these two different https connections to the server can use the same session established after the initial mutual authentication based on the SSL certificates and other stuffs.
To put in other words, I'm looking forward to do one time authentication and use this session by the two https connections.
I'm not using any browser. I have written a simple java client program to communicate with the server.
Thank you for any help.
Vinay.

Vinay,
I think {forum:id=926} (or one of the similar forums in the Java section) may be a better place for your question.
John

ITunes closes after the iPod is conected and views an error message

Now firstly yesterday i had a crash caused by a dealay in processes and after that my i tunes library went blank, luckuly my music was safe and soon i restored it. After i connected the i pod it asked me to reSync the ipod becuase it appeared to be tied to another iTunes library. After i did that the Itunes closed and gave an error message saying that it has unsuspectably closed. After i got it up and running i connected my iPod again which made it think for a while after which it gave the exact same error message. I used the 5 steps which did not realy help because i cant get my iTunes and iPod running at the same time. I decieded to probe the problem first by reinstaling the iTunes which did not have any effect whatsoever on the system or the problem. A thought came to me that the problem might be in the iPod itself and that i should try somehow to reset it to the default settings, because my itunes would not work i got my pc to reset the ipod to the defaults. After which the iTunes did not like my iPod and got the exactly the same error message again. Seemingly i had already renamed and tied my iPod to another library so that would mean that the problem is in the iTunes or the computer itself. Thus i tried to reinstall the iTunes before i tried again but this time insted of "Renewing" it wanted to completly wipe out iTunes to get a fresh start. So i ask you if threr is a way to fix this or atleast tell me how to completly wipe it out!

It sounds like it might be something with your iPod - You might want to post this question to the iPod forum & see if you get some help there.

Core, Community and Database missing errors

I'm installing using the mid December install disc and whenever I install the base system, use pacman -Sy or pacman -Syu i get this error, then it continues:
warning: database file for 'core' does not exist
" " " 'extra' " "
" " " 'community' " "
is this a problem with old install and will solve with pacman -Syu? if not, how do I update databases?

According to the Beginner's Guide, you should only run
# pacman -Sy
when you first install Arch. You should read up on the man pages for pacman to see what the flags mean.

E90 Communicator and viewing movies - problem :(

Hello,
ive got a problem with my E90. When im using Video Manager to covert and send chosen movie to my cell phone it works very weard. Some movies working properly - others dont - other have only audio. no matter what quality i choose this situation is always the same.
I can convert and transfer one .avi and it will be ok - and next .avi will have only audio after RealPlayer shows me some that there are some errors with this file.
I try to use DIVXMOBILE VIDEO - and it plays my /avi ok - but no older mp4 (or if he play them the performance is very low). i also try to use SMARTVIDEO - and situation is similar - i can convert .avi to mobile - send like normal file - and watch - but i cannot see my older movies recorder by the phone.
Can you please help me how i can convert and watch movies with 1 tool (not 3 different programs) ?
thanks in advance
Mizgal
[email protected]

Hi guys, I just discovered on my other Eseries mobile E71 installation disc there is video manager, I haven't install the Nokia PC suite for that particular phone yet because I already have PC suite for E90 on my PC & afraid it will replace or conflict with both existing suites at the sametime.
I am not sure if video manage will function with E90 communicator though they are both S60 3rd edition devices, they are of different firmware version & video codes all together. I only neede them to play the same format video files & I want to convert all my WMV , DSC , AVI, & mp4 formats to play on mainly my E90 & E71, not necessarily full length movies.:mantongue:

Dreamweaver and font activation error messages on Leopard

Since I've been using Dreamweaver CS4 on my iMac (Leopard 10.5.6)
I get font error messages all the times (I mean every 20 seconds!)
Mainly about Helvetica, but also Myriad.
Does Dreamweaver activate its own fonts or manages fonts in any way?
I stop getting font activation warnings when I don't use Dreamweaver (when it's off).
Did anyone ever heard of such a problem?
Thanks
Louis

Part of the URL seems to have been stripped from that link. Try this one:
http://forums.adobe.com/thread/417116#cache

IMessage and FaceTime activation error during international travel- WiFi still works

I am travelling out of the US for a few months and had been successfully using my iPhone 4s through wifi (no international plan, just using wifi features). I left a wifi zone and upon my return, my iMessage and faceTime are both showing me errors when I input my AppleId- that the ID and/or password are wrong. I've changed my password through my phone, through iTunes, and through the Apple ID website to no avail. My ID and password work for everything else.
Also, I am additionally getting an error message that my iPhone and cloud cannot be backed up now either.
Please help if possible- I am out of the US for a few more weeks to months.

In order to activate FaceTime and iMessage, the phone has to be able to send an SMS. So, if you put your phone in Airplane mode and turned WiFi back on or have turned off roaming, the phone won't be able to send that text. Sending a text, even internationally, shouldn't cost you more than about fifty cents.
Best of luck.

I am using serial communication and always having error 1073807246, I try to solved using the idea given in the ni site but it still doesnot work. Looking for your help?

I am using labview 6i. The ahrdware I am communictating is light modualtor.

"Here is the definition of the error from LabView:
"VISA: (Hex 0xBFFF0072) The resource is valid, but VISA cannot currently access it"
Are you able to communicate with the hardware manually using a sw like "HyperTerminal"? If so, configure the serial port setting to the same as that to communicate manually.
It appears that you are using a valid comm port, but it cannot talk to the hardware for some reason. It could be as simple as a bad connection (wiring / soldering / etc) to the hardware.
The first thing I would check is the ability to communicate manually. If it works manually and you duplicate the settings, it should work. If you can;t communicate manually, then you'll have to do some troubleshooting..
-JLV-

I have changed my sim card it saying activation required , when i enter id and password activation error it is giving how can i rectify this problem

hi

You need to sign out in System Preferences (or Settings)>iCloud and sign back in again with the new password

HTTPS communication

Hi,
I got a requirement where in I need to have HTTPS communication with one of my client. Basically I have to send files and receive files from their server.
Can anybody guide me what are the requirements my client should work for to support HTTPS communication and what type of adapter I should use to send and pick these files?
Regards,
Vijay.

HI Vijay
refer the below links
You can use the HTTP adapter. Refer to following SDN TV demo of the HHTP adapter for details steps involved into it.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
HTTPS using XMLSPY
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
The HTTPS configuration data of the Adapter Engines has to be configured in the SLD.
More Information in the "SAP Security Guide XI"
http://help.sap.com/saphelp_nw04/helpdata/de/f7/c2953fc405330ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
Under Security Check for Inbound Messages, you can specify which HTTP Security Level is to be assumed for incoming messages. You can choose from the following security levels:
○ HTTP (default value)
○ HTTPS without client authentication
○ HTTPS with client authentication
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Hope this will help you .....
pls reward if useful.....

BAM Error - during the creation of BAM Activity and View in EXCEL

I'm getting an error "The Cube could not be created successfully. Please edit the view and validate the inputs" during the creation of BAM Activity and VIEW in MS Excel for BAM
Error Details:
Error Description:
The following system error occurred: Invalid class string .
Error Source:
Microsoft OLE DB Provider for Analysis Services 2008.
Please help me in resolving the issue. Thanks in Advance!!

Hi Ramesh,
Below link has the information related to all the prerequisites for using BAM Add-In for Excel.
Kindly ensure that you have all the files in place before creating BAM Activity and View.
http://msdn.microsoft.com/en-us/library/aa560476.aspx
Rachit
Please mark it as Answer if this answers your question

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

Hi Ablondel24,
I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
First check the cache for the site:
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Second try to [[Delete cookies to remove the information websites have stored on your computer]]
Let us know if this solves the issues you are having.

BAM Activity and view issue on BizTalk server 2013 R2 machine.

Hello all,
I am trying to make BAM portal work since couple of days but no luck yet...
I ma using BizTalk server 2013 R2.
I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
I have gone through one post and found this and followed steps here is the output for that :
First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
bm.exe get-activities
--> I can see the activity name in there so I belive that activity is got created.
While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
bm.exe get-views -Activity:<activity name>
--> I can see the view name in there so I belive that view is exist.
You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
--> while executing this command is got error as :
Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
ERROR: Security management of the BAM view failed.
The SQL role for the specified view is missing.
Note : My BAMAlert service is running and running using
GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
Thanks and Regards, Nitin.

Hi Nitin,
Can you try the solution as suggested by Thiago Almeida.
http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Hello Ashwin,
As per that post the author was having issue that view was not created ...
also have noticed one thing that by executing following command in sql management studio.
use
BamPrimaryImport
SELECT
SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
Thanks and Regards, Nitin.

CRM Mobile Sales Application : HTTP Communication Failure ERROR

Hi All,
I am trying to build a CRM mobile application in the Windows mobile.
the steps that we have followed are:
1. Activated and generated the Standard CRM mobile software component MAS_SMARTPHONE_DMSCV
2. Created the same Users in the CRM and DOE system
3. Set up windows mobile simulator
4. Created data in the CRM backend and performed initial download in the DOE.
5. activated the distribution model rules in the Admin and monitoring portal
6. and finally installed CRM mobile sales App in the Windows mobile,connected it to a device,and logged in to the CRM app from the simulator using the user and password created in step 2.
A device is created on the Admin & monitorng portal as soon as we sync from the simulator but we are unable to see any data
in the outbound queue.
In the transaction SMQ2 we have found our device queue with an error saying *exception occured due to HTTP communication
failure*
Debuggin the queue we are able to find an error under the class CL_DOE_ESDMA_SOAP_HANDLER in the method
PUSH_TO_DEVICE.
As we are on new grounds we are not able to assess the problem. Does it have anything to do with ports.
We are able to get see all the messages and the data while debuggin but while pushing it to the device there is a glitch.
Please suggest with any solution to this or what might be the

Hi Siva,
Thank you for your reply.
We have checked the ports that is concerning SUP it is 2000 we find it is active and open.
We have also checked a subscription monitoring table as suggested in a previous post [/community [original link is broken]
threadID=1978692].
we are getting a HTTP 110 error while debugging the queue of the device.
While checking a monitoring we have found a log saying :
Receive failed: client host = 10.116.158.208: com.sybase.djc.SystemException: HTTP: Post Message - HIOP Version not specified\nProbable cause: unexpected failure or abnormal shutdown of client application or client host
Please suggest to us what might might be the problem.
Thanks,
Krutheeka.

Error occurred during HTTP communication

I'm trying to launch ICWC from gui and here's the message that comes up in the web page :
The runtime repository could not be interpreted
An exception has occurredException Class CX_BSP_WD_HTTP_COMM_ERROR
Text: Error occurred during HTTP communication
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 10
URL is: https://<servername>.<clientname>.edu:8253/sap(bD1lbiZjPTY1MiZkPW1pbiZpPTEmcz1TSUQlM2FBTk9OJTNhcXVha2VfRFIyXzUzJTNhekxVMEJ5V0lJeWVTXzFsTEtnb1JjVVZqZXJXVldUUzF6bVdlM210Ti1BVFQ=)/bc/bsp/sap/ic_base/default.htm
We run CRM 5.0 Support Pack 8.
Appreciate any ideas on how to correct this.
Thanks,
Naga.

Hi Naga,
I have exactly the same issue...how did you resolve this?
If it was the services in SICF, which ones did you need to activate?
Thanks,
Alan

HTTP Communication and View activation error

Similar Messages

Maybe you are looking for