HTTP Connection for Solution manager
Dear Experts,
SAP support team asked to create a http connection for solution manager for service check.We already created a R/3 connection for solution manager.why they are asking for HTTP connection? Really they required HTTP connection ?,Is they are any problem with this type of connections.What are the transaction codes which are not run in SAP GUI. Please clarify my doubts.
Thanks and regards,
Patan Thavaheer.
Hi Patan,
Solution Manager transaction codes open in http browser. You can check the behaviour yourself by making a login to solution manager and execute transaction code solman_setup.
For SAP support to open http browser within remote support, they need to have http connection opened along with HTTP url maintained.
Refer to the SAP help link above for the procedure.
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
What are installations material for Solution Manager 7.0 EHP 1
hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis -
ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS
Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeemHi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok -
BI content for Solution Manager 4.0
Hi Experts,
I want to install BI content for Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
if somebody knows somthing , please , let me know.
Thank you.There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
0SM_DSWPBI_BPM BPM Data (Alert Data)
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider. -
Third-party tools for solution manager
Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
TimHi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji -
Connection from Solution manager to SapNet
Hi,
I want connect from solution manager to sapnet for downloading support packages. What i need to do ?
I think that i need to:
1. official IP address for solution manager host ? Could this ip address be one in all network and routed to solution manager host ?
2. Install sap router on solution manager host ?Hi Mindaugas,
For getting SAP Solution manager connected to SAP Net the following where mandatory
We Should have a official IP address of the computer on which SAP router can be configured. Its not necessary that you should have it in solution manager server. You can have it in any of the computer within your network and configure SAP router in that machine. This should be an official and registered IP address. You cannot use address such as
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
Later solution manager can be connected to SAP net using three RFC connections SAPOSS, SAP-OSS, SAP-OSS-LIST-O01. But before starting this make sure that you have configured SAP router correctly. Only then these RFC connections will work.
Also refer Note: 28976
regards,
Anandh -
CRM Content for Solution Manager
Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Please help.
Kind Regards
Felix>
felix chabeli wrote:
> Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
>
> I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
The content is shipped via add-on ST-PI and its support packages.
Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
Regards,
Ruediger -
Quality Center Adapter - Connecting Multiple Solution Manager Systems
We are running Solution Manager 7/Enhp 1 and Quality Center 10 successfully using the Quality Center Adapter integration. My question is, can we connect multiple Solution Manager systems (i.e. SMP/SMS/SMX) to a single Quality Center server simultaneously? Or is there a one-to-one relationship restriction. Thanks.
I have answered this question in this post below:
http://forums.sdn.sap.com/thread.jspa?threadID=2110531&messageID=10962875#10962875
To quote myself
Each tie up is based on the logical ports at the Solution Manager end and the relationship between the two entities is between Projects. So if you set up the configuration like you would in a normal scenario and at the right moment, connect the projects in SolMans to the corresponding projects in HPQC, you should be fine.
Hope that helps. -
Post Installation steps for Solution Manager 4.0
Hi Experts,
Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
Thanks & Regards
SunilHi
In installtion guide you can find the information you needed also check
Visit for step by step details of Standard Configuration of Basic Settings
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator how to install and
configure solution manager
https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
and for Maintenance optimizer setup
https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if needed more information
Regards
Uday -
Question about how to connect two solution manager
Hello experts
one of our clients wants to connect his SOLMAN to our SOLMAN, that way
when they receive a case in his ICM we can monitor the case and respond
It, if the situation requires or they ask for our help.
Can you please tell me if theres a way to connect them and what is the
best way to do that?
Thanks for your help,
Regards,You are going to connect a Solution Manager to another Solution Manager, so I think it is enough to use the RFC destination on the connection.
I suppose you want to send a message from 7.0 to 7.1, so you may:
In Solman 7.0 system:
1. T-code SM59 > Define an RFC connection to 7.1 system;
2. T-code ICTCONF > Add an entry for the 7.1 service desk, specify
the RFC Destination as the one you defined > Activate -> Generate default value mapping (you may find the button on the top of ICTCONF).
In Solman 7.1 system:
1. T-code SM59 > Define an RFC connection to 7.0 system;
2. T-code ICTCONF > Add an entry for the 7.0 service desk, specify the RFC Destination as the one you defined > Activate -> Generate default value mapping;
3. Customize your own value mapping including the transaction type. You will find the details in:
IMG -> SAP Solution Manager -> Capabilities (Optional) -> Application Incident Management (Service Desk) -> External Integration -> External Service Desk
Most fields of SIVA and SMIV are the same (for example, priority) so you do not need to care about the value mapping if you do not have special requirement. However, some fields only exist in SIVA category, subject) and others only exist in SMIV (multilevel categories). You may need to implement your own code according to your requirement.
Thanks
Vikram -
No EarlyWatch Alert for Solution Manager task in SDCCN
Hello All,
We have configured SAP Solution Manager and managed system to generate EWA report.
In Solman, we have created the system, logical system and solution. We have activated the managed system in Setup EarlyWatch Alert in Solman.
In Managed system, we have activated SDCCN, assigned BACK RFC, created Maintenance package and refresh sessions.
However, after completing the Maintenance package task there is no EarlyWatch Alert for Solution Manager task created in managed system. We have reviewed the task logs and found no errors.
In Solman, when we create EWA for today's date the status is showing with an Hour glass stating that "Wait for session data: SAP EarlyWatch Alert and session number"
Kindly assist us in fixing this issue
Thanks in advance
Regards,
SatishHi
the task "early watch alert for solution manager" created automatically when did you perform the task "refreh session" or "Maintenance Package"
please create the relevant task, via : SDCCN -> Task -> Create ->Request session data ->Periodic -> Earlywatch Alert -> Continue.
'Schedule' the start date of the first session and - Task -- create Click on 'Refresh sessions' - Press 'Enter' - Select 'Now', to schedule the job 'immediately. once you create the relevant tasks you go by, in the Menu - Goto -> start - to activate the Earlywatch alert session Now, you can check the finished EWA task in 'done' tab.
Login to Solution Manager, goto trx. DSWP --> Select your solution, Solution Monitoring - Earlywatch alert - Click on Earlywatch alert --> start service processing --> Press 'OK' to start the background job - click 'Refresh'
Now, you can see the 'Early watch alert' in the green colour .
more further refer here [EWA guide|http://forums.sdn.sap.com/servlet/JiveServlet/download/156-1701991-9166329-1518/EWA_Activation.pdf]
jansi -
Is there any service desk guide for Solution Manager 7 configuration?
Dear Sir:
I would like to configure the service desk of solution manager 7.
but all i found documents are for solution manager 4.
the IMG setting and other steps are quite different...
wondering is there any new guide or step by step documents for specific solution manager 7?
Regards
Jack Leehi,
There is no direct document which is that much specific
Have you checked this document
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
U can follow the steps and if u dont find any node u cn search in SPRO
in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
rest check this
Service Desk: Support team determination
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Service Desk Implementation Guide
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Hope it helps,
Regards
Prakhar -
How to create and test HTTP connection for proxy
HI
Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
How i will get sure that connection is working properly?
Thanks
DebrajHi Debraj,
You should be able to do that in SM59 of the XI Box.
Create the connection under "HTTP Connections to R/3 System".
Provide the Target Host IP Address.Service Number and Path Prefix.
Select the logon procedure as SAP Standard.
SSL Inactive.
Provide Logon details.
Regards,
Ravi -
Is it feasible to create odataservice for Solution manager using UI5 technology?
Hi Experts,
Is it possible to create new odata service for solution manager, such as Viewing BPML(Business process master list).
If yes, kindly share the steps/way to achieve.
Regards,
Asmita RanadeJulie,
same answer here which you already got in the two threads you opened on the MOS communities: No, not really since you want to do it in Answers. It *would* be possible in the RPD, but quite pointless to instantiate an RPD variable just to instantiate some literal code. -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar
Maybe you are looking for
-
Windows 7 Backups: Getting Back to Vista from the Brink
I need an ironclad contingency plan to back up my data so that I can test Windows 7 Beta. I only have one computer. It's a laptop with a relatively modest hard drive, so dual booting is not an option for me. I am not a developer, but I consider my
-
If I'm in LIghtroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining
-
What's the best way to run 2 apple IDs on the same MacBook at the same house?
What I'd like to do... I have a family MacBook using a time capsule as its HD. This is where I store our music and movies on iTunes. I have iTunes match, a new iPad, iPhone 4S in my apple ID. My wife has iPhone 4 and new iPad in her apple ID. And we
-
HP Officejet pro 8600 plus Scans show up as blank pages on Macs okay on PCs
Scans made on HP Officejet Pro 8600 Plus show up okay on PCs buas blank pages on Macs. Any ideas? I can copy them into Publisher and then save it from Publisher as a pdf and Macs get it okay. Prefer not to have to do this
-
Creating Drop Down Lists in J2ME
Hello all, I'm not an experienced programmer, and I fear that the rumours of posting a crie for help only to be set upon by hundreds of blood thirsty 'newbe' hunters may be true, but here goes none the less. Would love to know if any kind soul has hi