HTTP connection to ABAP runtime failed
I am building a scenario where XI picks up a file from a directory and pushes an IDoc to ECC. I have configured the interface with the Design tool, and I believe my setup in the Configuration tool are correct too, however I am encountering an error when testing the scenario by means of --
Tools --> Test Configuration.
The testing tool is giving me the following error upon processing the reciever determination:
HTTP connection to ABAP Runtime failed.
Error: 403 Forbidden
URL: http://serveraddress:port/sap/xi/simulation?sap-client=100
User: PIDIRUSER
First of all, I am not sure who the PIDIRUSER is, I assume it's a system user? Second, given that this error is a HTTP connection error, I am lead to believe that the issue lies somewhere in the RFC connection from XI -> ECC. I am not sure why exactly it's attempting to connect via HTTP as my communication channel is using the IDoc adapter with an RFC destination to connect to ECC. Possibly I have configured this incorrectly. I have read about having to configure a RFC adapter when posting messages from R/3 to XI, does the same apply when posting an IDoc from XI to ECC? Does anyone have any other thoughts as to why this error may be occuring? Thanks in advance for your time and help.
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
Regards
Agasthuri Doss
Similar Messages
-
Error : HTTP Connection to ABAP Runtime failed
Hi,
i am working on xml to flatfile interface.when i am trying to test the scenario from ID - > Tools -> Test configuration option i am getting below error.
Receiver Determination <Not found>
Internal Error Http connection to ABAP runtime failed.
Error : 403 for bidden.
I have checked in Receiver determination its been configured properly.
Is it any basis settings problem ?
Thnx,
Siva.Hi Siva,
Check this links
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
Regards
Ramesh -
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden
Hi ALL
We where testing our scenario using the Test Configuration in Integration Engine.
We have come across the following error in the second step of Determining the receiver.Here is the error message we received...
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: _http://SAPXDV01.sap.client1.local:8000/sap/xi/simulation?sap-client=150 User: PIDIRUSER
Please, do let us know ... if you have received similar error & what solution can be applied...
Your help is greatly appreciated!
Thank you,
PatrickHi,
Go through this thread...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0f00c890-0201-0010-beb2-c96050edc426
JCO_COMMUNICATION_FAILURE
Error in XI server: JCO_COMMUNICATION_FAILURE in Message Mapping
This might help you..
Regards,
Divya -
PI internal error : HTTP connection to ABAP Runtime failed
Hi Experts,
From last 3 days,I am geting a SAP PI internal error(PFA for the detail).for that error,previous sucessful scenario also not working.The error I am getting in the 'TEST CONFIGURATION' of the ID:(sometimes i am getting this error in ' Receiver Determination' and sometimes in 'interface determination & mapping')
[ Receiver Determination
<Not found>
Internal Error
HTTP connection to ABAP Runtime failed. Error: Unexpected end of file from server URL: http://deveppi103:8002/sap/xi/simulation?sap-client=117 User: PIDIRUSER ]
Please,suggest.
Regards,
Raj TripathyHi Raj,
We had faced this issue a few days back and there was an entry missing in the table.
This issue has been discussed on this forum multiple times:
Prefix number: entry missing for system TST client
workflow- Prefix number: entry missing for system xxx Client xxx
Regards,
Sanjeev. -
HTTP connection to ABAP Runtime failed : 403 : forbidden
Hi all,
I have configured a normal file to file scenario and when i test it in the TEST CONFIGURATION tool in intergration directory, am getting the error.
HTTP connection to ABAP Runtime failed
403: forbidden
user: PIDIRUSER
Sugessions plzzz
Regards
Arun
Message was edited by:
Arunkumar sukumarHi
Try this
note 517484
1) Activated all services
2) In Integration builder, receiver communication channel make sure you have entered proper
host service number
path = /sap/xi/enigne?type = receiver.
3)Go to SU01 > type PIISUSER and reset the user's pw
Check out this might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
1.Did you maintain Client, userid, password, and lang information in SICF transaction -> sap/xi/engine? Double click on service and check whether you have entered correct information.
2.Then you might check the roles of the XIISUSER in SU01. In some case there are some double roles, i.e., two times the role SAP_XI_IS_SERV_USER assigned. One might have the date of the last update, the other one might have apparently the older version. Delete the older roles manually and the error should disappear.
3.to send messages to xi you need a service id / pwd which is specific to your landscape usually its xiappluser. Contact your basis group for password.
4.
- Activated all services on the r3 system.
- Create HTTP connection to XI from r3
sm59-> http connetons to r3
- let us say you have created a HTTP connection in the integrationserver_XI, make sure in its settings the prefix path is set to /sap/xi/engine?type=entry. Also check its log on credentials, you can use xiappluser.
- IN Integration builder, receiver communication channel make sure you have entered proper
host service number
path = /sap/xi/enigne?type = receiver.
5. can you also try the following;
Visual Admin -> start the service,
"com.sap.aii.af.ms.app".
I don't know this Forum no fhats why i copied.
Thanks -
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL
HI experts,
I am tsting Test configuration in ID in Quality environment. I am getting below error for all interfaces.
but same interfaces are working fine in Develoment environment.
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://abcdxi06.abcdk.abcpower.com.sg:8000/sap/xi/simulation?sap-client=300 User: PIDIRUSER.
thanks
SrinivasSimilar problem discussed here:
HTTP connection to ABAP Runtime failed : 403 : forbidden
Error testing configuration: "HTTP connection failed"
Check if the port is defined, as suggested in second link.
Regards,
Abhishek.
Edited by: abhishek salvi on Oct 1, 2009 1:27 PM -
SM59 - HTTP Connection to ABAP System fails
I am building an http conn from XI to ECC6 for ABAP proxy
On Connection Test, I get the error - ICM_HTTP_CONNECTION_FAILED
On running the trace in SMICM, I get the following:
[Thr 5] *** ERROR => Connection request from (-1/65535/0) to host: srpidev.srhouse.com, service: 8000 failed (NIEHOST_UNKNOWN)
[Thr 5] *** ERROR => IcmJ2EEScheduleFunc: Connection to srpidev.srhouse.com:8000 failed - please check host configuration (-8)
I get the foll on running the report: SPROX_CHECK_HTTP_COMMUNICATION
HTTP communication contains errors (see long text for diagnosis)
Message no. SPRX086
Diagnosis
The HTTP communication of this application server is not functioning correctly.
When calling the method
IF_HTTP_CLIENT=>RECEIVE
the exception
HTTP_COMMUNICATION_FAILURE
was triggered.
The short text for this exception reads as follows:
Communication Error
Procedure
Contact your system administrator
Can someone please help?
Thanks in advance.
Regards,
PrasadHello Michal,
Thanks for your response.
Part of this problem has been solved right now...the http port on the R/3 server is 8002 and not 8000!!
Changing the port solved my problem from XI to R/3.
But the R/3 to XI error persists with the same behaviour. I have checked with BASIS, no firewall exists in between.
I have used the ip add while creating the http conn....do I have to change this elsewhere?
[Thr 6] Wed Jul 23 15:33:25 2008
[Thr 6] *** ERROR => Connection request from (-1/65535/0) to host: <hostname masked>, service: 8002 failed (NIEHOST_UNKNOWN) {
[Thr 6] *** ERROR => IcmJ2EEScheduleFunc: Connection to <hostname masked>:8002 failed - please check host configuration (-8) [
[Thr 13] Wed Jul 23 15:34:13 2008
[Thr 13] *** ERROR => PlugInHandleNetData: client: premature EOS - header not complete in response [http_plg_mt. 2627] -
HTTP connection ABAP runtime failed- 404 Error
Hi,
We have just installed a new PI 7.0 system. When we do the cache connectivity test we get the following error:
"HTTP connection to ABAP runtime failed:
Error: 404 Not Found
URL: http://PID:50000/sap/xi/simulation?sap-client=020
User: PIDIRUSER
The port should have be 8000, but it is picking 50000. Can someone tell us where to fix this issue? Your help will be greatly appreciated.
Thanks,
KarmaHi,
I know you got to set the correct URL and port ,I am not sure but I think URL in SLD and port for IS.
and URL supposed to be something like this http://<host>:<port>/sap/xi/engine?type=entry
please see last two replies in this thread,
Re: unable to get file into output folder
and this might also help you
Error 404 in SXI_Cache ?
regards,
Babu -
What is this error"HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://dst01pi:8001/sap/xi/simulation?sap-client=100 User: PIDIRUSER" ?
Make sure user PIDIRUSER has role SAP_XI_ID_SERV_USER.
U may try changing your service user password using SAP Note 721548.
Regards,
Prateek -
SM59 Error in HTTP connections to ABAP Sytems
Hi All,
My scenario is to connect to XI systems... I need to create a RFC destination (HTTP connections to ABAP Systems) in SM 59 with below details.....
Target host: xyz.abc.com
Service No. : 0000
Prefix path : /sap/xi/engine?type=entry
But SAP GUI is not accepting the character "?" ...
Can any one tell what can be done to avoid this error?Hi,
it's only a warning -> just press 'Enter' key.
Regards
Patrick -
Load balance for HTTP Connection to ABAP System (Type H) RFC connection
Experts,
For proxy we are using HTTP Connection to ABAP System (Connection type H) RFC connection in PI to get connected to ECC. I only see the option to use Target host in the Target system settings than Load balance option. In general ABAP Connection (Connection type 3) has Load balancing status option in Target system settings.
My requirement is I should use a logon group with the message server when PI connects to ECC. How can we achieve this? At the moment I can only use the Central Instance or any dialog server (App server) in RFC but not a logon group.
Thanks in advance.
MaheshHi Naga
Could you check the link below?
http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/c5935087b62d66e10000000a42189c/content.htm
https://service.sap.com/sap/support/notes/1040325 -
HTTP Connection to ABAP System - Query String Not Allowed message
Hi All,
We are trying to create HTTP Connection to ABAP System on a SAP ECC system.
Following entries are added
1 Connection Type: H
2 Target Host: Host name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
It is not allowing me to enter Path prefix as "/sap/XI/engine/?type=entry". It is throwing a warning message as "Query String Not Allowed message".
As per the documentation it is mentioned that -<b> If the system displays the Query String Not Allowed message, you can ignore it.</b>
It is not allowing me to save the entries succesfully . I need to remove the path refix entry then only i am able to save other wise it is not allowing me to proceed at all.
Please let me know what entry i can put for the same or let me know how can i ignore and proceed by saving the path prefix as "/sap/XI/engine/?type=entry".
Please provide your valuable help on this.
Regards,
NandaHi Aamir ,
Thanks for the response.
Tried both but still same issue .
Any more inputs .
Cheers,
Nanda -
Http connection to ABAP problem
Hey Gurus,
I have a problem with the configuration of a http connection to an ABAP system (type H ). Due to the PI Development Book I shall set up a connection called "XI_Integrationserver".
The target host is: saptest8 , port 50000.
The path prefix is: /sap/xi/engine/?type=entry
client
user: PIAPPLUSER
When I test the connection I get an 404 (Not found) error. But it should be an 500 (internal server error). In transaction SICF the engine is started. I don't know how to solve this problem. Please help me!
I'm using PI 7.01!!!
Thanks for any reply.Hi,
the name does not matter, but "XI_Integrationserver" is missleading because the target is an application system, better would be "INTEGR_ENG_SAPTEST8"
Assumedly the port is wrong. Did you put the port of the ABAP WAS? Transaction SMICM / GoTo / Services
Regards,
Udo -
Message Server connection in ABAP-Part failed
Hi!
I cannot start the J2EE-Part ofSAP Sokution Manager 4.0 system...
I am getting the error message from CMD-console "Message Server unrechable" and then "Running bur not connected to Messager Server" and after this the disp+work.exe from J2EE-Part stoppes.
<b>Can someone give me the recommendations to solve the problem?</b>
Thank you!
regardsI have found in the dew_disp file the error "1 possible network problems detected-check tracefile and adjust the DNS settings [dpxxtool2.c 5273]"
and then "VMC (Java VM in WP) is not active".
<b>But I still do not know how to solve the problem and which tracefile is important in this case...</b>
Thank you for any help
regards -
Error testing configuration: "HTTP connection failed"
Hello all,
I get the following error message when I want to test a configuration with the Configuration Test Tool (I replaced the hostname):
Internal Error
HTTP connection to ABAP Runtime failed.
Error: 403 Forbidden
URL: http://<hostname>:8065/sap/xi/simulation?sap-client=
User: XIDIRUSER
The error appears in the second step (Sender Agreement works, Receiver Determination the error appears).
Seems as if the client is missing in URL. Or is it anything else? What could I do to avoid this error?
Thanks and regards
JoschiHi Joachim,
Do you resolve the problem? If not, check the service in PI.
Your simulation service is not active. So use transaction sicf to activate the simulation service under XI. Hope this will help.
Y.Weng
Maybe you are looking for
-
Mac OS 10.7 printer problem with 6500 all-in-one wireless
HP 6500 all-in-one wirelss: After configuring (and reconfiguring) the printer and exhausting all the troubleshooting steps suggested by HP, I still have the problem of prints stalling in the queue or, alternately, printing very very slowly. Wireless
-
Saving of different Material code in the system while Creating material
Hi, Anyone can help me in following . While creating material number, there should be some User exit which is going to change the logic for saving of material number in the system. Example: Division and material Group should be added into the predefi
-
Hi I tried playing in a recording from a Minidisc for editing on Adobe Audition - something I've done many times with Audition on other computers but never with this one. When I opened Audition I got the message: 'Adobe Default Windows Sound Driver.
-
Floating Divs in Image Gallery not within Div
I am creating a property page template that is nested within the main website template. Within this template, I have created a div within a div for the Image Gallery I am going to create.There is a main image and then 5 thumbnails underneath and all
-
My 2012 macbook pro is running really slow, how can I make it run faster?
I ran the etrecheck, and this is what resulted: Hardware Information: MacBook Pro (13-inch, Mid 2012) MacBook Pro - model: MacBookPro9,2 1 2.5 GHz Intel Core i5 CPU: 2 cores 4 GB RAM Video Information: