HTTP error [403] in "Add Forums Administrator User"-iView (Forum)

Hi All,
I need help with installing the forum functionality.
When I open the "Add Forums Administrator User"-iView I always get the following error message:
403 Forbidden
You are not authorized to view the requested resource.
In the log-file I found the following message:
User tfelp4, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].
I must say that my useraccount has Superadmin-Permissions...
The "Forum"-iView works without problems, but there are no forum catagories, cause they must be installed for using.
Hope someone can help me
Thanks in advance
Steve

Hi Trevor,
thanks for your reply. What does it mean "The actuall permissions must be given on the WEBAS"? In my understanding the Userprofiles and the assignment of permissions to a profiles are stored in the UME. In my mind I can do that within the portal environment.
Hope you can help me...
@All: Does anybody has similar problems?
Bye and Thanks
Steve
null

Similar Messages

OAAD Picture upload - HTTP Error: 403 Forbidden

Dear forum,
When trying to upload a picture for our Q/A HR system in tx OAAD I get the error HTTP Error: 403 Forbidden. However, I can do it with no issues in our prod environment. Anyone has an idea why this is? I have checked SICF and icman is enabled. Does anyone have an suggestion? Hence it isnt portal communication I cant use httpwatch, which most likely could have told me whats wrong.
I hope someone is able to comment on this issue.
Thanks in advance!
Kind Regards,
Soren

Dear Friis,
We have a steps of configurations that needs to be completed for the photo upload to be working. As you say the same is working in the production system, I hope you have the steps with you.
Most common things that needs to be checked in this scenario are,
1. HTTP service availability through the configured profile parameter in the system
2. Restart after the profile parameter change
3. Content Server node activation in SICF transaction
4. User ID and Password to be mentioned in the SICF service as communications or system user
5. Other checks for the content repository and the number range
You can also try repeatedly, to upload the pic (in a JPG format) - because most usually the first trial ends in a failure for the HTTP service with a 403 Forbidden error message.
Let me know your response and the steps you had followed for the config.
Thank you
Regards,
Vineeth

HTTP Error 403.14 - Forbidden

I am running Vista Ultimate SP2 and Visual Studio 2008. I am getting the following error and would like to know how to fix it and how to fix it so that I am not asked for admin privilages all the time. I am the administrator, Here is the error I am getting:
Server Error in Application "DEFAULT WEB SITE/BALLOONSHOP"
Internet Information Services 7.0
Error Summary
HTTP Error 403.14 - Forbidden
The Web server is configured to not list the contents of this directory.
Detailed Error Information
Module
DirectoryListingModule
Notification
ExecuteRequestHandler
Handler
StaticFile
Error Code
0x00000000
Requested URL
http://localhost:80/BalloonShop/
Physical Path
C:\inetpub\wwwroot\BalloonShop\
Logon Method
Anonymous
Logon User
Anonymous
Most likely causes:
A default document is not configured for the requested URL, and directory browsing is not enabled on the server.
Things you can try:
If you do not want to enable directory browsing, ensure that a default document is configured and that the file exists.
Enable directory browsing using IIS Manager.
Open IIS Manager.
In the Features view, double-click Directory Browsing.
On the Directory Browsing page, in the Actions pane, click Enable.
Verify that the configuration/system.webServer/directoryBrowse@enabled attribute is set to true in the site or application configuration file.
Links and More InformationThis error occurs when a document is not specified in the URL, no default document is specified for the Web site or application, and directory listing is not enabled for the Web site or application. This setting may be disabled on purpose to secure the contents of the server.
View more information »
Thank you for your assistace.
LadyDee

I don't know anything about IIS.
"karan.manglani" wrote in message
news:0370a1a7-67b6-4e02-a2d4-cee3f61d5555...
> Thanks for the help David. Got it installed; however, i still have the
> same problem that I had originally which is a problem with my default
> document.
>
>
>
> HTTP Error 403.14 - Forbidden
>
> The Web server is configured to not list the contents of this directoy.
>
> Module: DirectoryListingModule
>
> Notification: ExecuteRequestHandler
>
> Handler: StaticFile
>
> Error Code: 0x00000000
>
> Requested URL: https://localhost:443/
>
> Physical Path: C:\Windows\Web
>
> Logon Method: Anonymous
>
> Logon User: Anonymous
>
>
>
> I am trying to set up Remote Desktop Web Access on my own domain. If I
> browse to the application in IIS, the webpage is displayed; however, when
> browsing to the actual site, I am forbidden. My default document is
> enabled and has the following entries:
>
> Default.htm
>
> Default.asp
>
> index.htm
>
> index.html
>
> iistart.htm
>
> default.aspx
>
> All entries are inherited. I do not want to enable Directory Browsing. I
> just want the app to open when I visit the domain. All help is greatly
> appreciated!
>

HTTP Error 403 You are not authorized to view the requested resource

Hi Experts,
When I open the node "Hierarchie groups" I get the following error: "Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction. "
In the log file I find the following:
User MI_SERVADM, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].
I used the User Service for administrator, I have not used the individual user for administrator.
Regards, Gokhan

Ah anyway I receive the above error even when I do a search in the node "Mobile Components".
Now there's this in the LOG DefaultTrace (2 errors following)::
1) Connection is already closed and no longer associated with a managed connection
2) Exception occurred when processing Search:
[EXCEPTION]
com.sap.ip.mi.admin.core.ApplicationException: Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction.
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:730)
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:580)
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerLocalLocalObjectImpl0.getHierarchy(GroupingControllerLocalLocalObjectImpl0.java:547)
     at com.sap.ip.mi.admin.services.GroupingDelegate.getHierarchy(GroupingDelegate.java:81)
     at com.sap.ip.mi.admin.ui.HierarchyGroup.buildUpList(HierarchyGroup.java:252)
     at com.sap.ip.mi.admin.ui.wdp.InternalHierarchyGroup.buildUpList(InternalHierarchyGroup.java:409)
     at com.sap.ip.mi.admin.ui.Search.triggerSearch(Search.java:222)
     at com.sap.ip.mi.admin.ui.wdp.InternalSearch.triggerSearch(InternalSearch.java:286)
     at com.sap.ip.mi.admin.ui.Search.wdDoInit(Search.java:138)
     at com.sap.ip.mi.admin.ui.wdp.InternalSearch.wdDoInit(InternalSearch.java:272)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.onComponentCreated(ViewManager.java:258)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.fireComponentCreated(ComponentUsage.java:575)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:175)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141)
     at com.sap.lm.webadmin.mainframe.RenderingUtils.loadCurrentPlugin(RenderingUtils.java:189)
     at com.sap.lm.webadmin.mainframe.MainFrameView.wdDoModifyView(MainFrameView.java:272)
     at com.sap.lm.webadmin.mainframe.wdp.InternalMainFrameView.wdDoModifyView(InternalMainFrameView.java:1419)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Edited by: dpns22 on Feb 1, 2010 10:31 PM
Edited by: dpns22 on Feb 1, 2010 10:59 PM

HTTP Error 403.16 - Forbidden, Your client certificate is either not trusted or is invalid.

Dear Experts,
I have tried mutual authentication with sample website as per below link:
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
1. Created a Root certificate, client and server certificate based on this root certificate by using Makecert command as per below link:
2. Import these certificates in Trusted Root Certification authority of both the stores (Local and Current user)
3. Created a sample website with HTML page
4.Hosted this website in IIS with HTTPS binding and selected the above server certifcate
5. Enabled "Require SSL" and selected "Require" under SSL settings of website
6. Exported the client certificate in base64 format --> Edited in notepad --> made the key into single line
7. Placed the above key under Configuration editor --> system.webServer/security/authentication/iisClientCertificateMappingAuthentication --> one to one mapping with user credentials.
8. I tried to access the website
But, I ended with below error :(
HTTP Error 403.16 - Forbidden
Your client certificate is either not trusted or is invalid.
Detailed Error Information:
Module    IIS Web Core
Notification    BeginRequest
Handler    ExtensionlessUrlHandler-Integrated-4.0
Error Code    0x800b0109
Requested URL    https://localhost:443/
Physical Path    E:\SampleRoot
Logon Method    Not yet determined
Logon User    Not yet determined
Could you please let me know what I missed here.
Note:
I am using windows8, IIS8.0.
Thanks in advance.
Regards,
M. Prasad Reddy.

Hi Prasad,
As per this case, I have been shared the corresponding details below
1.First of all,make sure that you import the certificate whether it belongs to Trusted RootCertification or not .
    If that is the case ,Goto Microsoft Management Console (MMC), open the Certificates snap-in.
    For instance, the certificate store that WCF is configured to retrieve X.509 certificates from, select the Trusted RootCertification Authoritiesfolder. Under the Trusted Root Certification Authorities folder, right-click the Certificatesfolder,
point to All Tasks, and then click Import.
2.you configured the server certificate as well, But check the client certificate whether have root certificate or not by following command?
makecert -pe -n "CN=SSLClientAuthClient"
         -eku 1.3.6.1.5.5.7.3.2 -is root -ir localmachine -in WebSSLTestRoot
         -ss my -sr currentuser -len 2048
3. Also check the Service Certificate whether its configured on the WCF Service side
4.Make sure that you followed all the steps are done correctly from your given referred link below
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
5.Besides, please try to set the require SSL as ignore to see if you can access the website.
If the above details cannot able to resolve this issue, please post your config file here.

WL 5.1 and IIS - HTTP Error 403 - Access Forbidden problems

I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing the Microsoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my default Web
site. This didn't help. I even tried creating a directory called public_html
inside public_html, setting execute privilages on it, and putting a copy of
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl and walk.
Cheers...
Dave Bruzzone
WebCredenza, Inc.

Thr problem is that you must set Execute rights to the IIS web at the
Configuration settings (exactly as seen in the documentation).
"Davide Bruzzone" <[email protected]> ha scritto nel messaggio
news:8iubob$mgp$[email protected]..
I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing theMicrosoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my defaultWeb
site. This didn't help. I even tried creating a directory calledpublic_html
inside public_html, setting execute privilages on it, and putting a copyof
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl andwalk.
>
Cheers...
Dave Bruzzone
WebCredenza, Inc.
[isapi2.gif]

HTTP Error 403 on NT 4.0

Hi,
We have just installed 5.0.1 SP 5 on an NT 4.0 (SP 4) box. We have been
successfully developing and unit testing on 5 different developer
machines for a few months, and are ready to have QA start testing.
We are using EJB's to connect to an Oracle DB (also residing on the same
machine).
I have moved our JAR files and JSP files over to the machine and tested
it from the deployment machine and from my own machine using:
"http://deploy:7001/product/index.jsp" (the "index.jsp" is in the
<wl>/myserver/public_html/product directory)
However, when my colleague -- on the same network -- tries to open the
same page he gets "HTTP Error 403" "You are not authorized to view this
page". I am also getting the same error when I VPN into our network.
The permissions on the directories and files are Full Control for
Everyone.
I suspect it may have to do with internal domain representations, but
I've been stumped and would appreciate it if anyone has some insight.
Thanks,
Peter

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the Oracle Technology Network (OTN) > Products > Database > Database - General forum.

HTTP Error 403 - Forbidden error when auto including a jspx page

Hi All -
We have a situation where one of different reports pages gets included inside a main reports page based on user selection via a selectOneChoice control.
But when the Reports Main page tab is clicked for the first time we get a "You are not authorized to view this page" HTTP Error 403 - Forbidden error.
Upon clicking "Refresh" and then clicking the Reports Main page tab again, the page renders correctly.
This is our code snippet. All the report related pages(MainPage.jspx, Schedule.jspx and Budget.jspx) are inside a reports folder under the context root. Please help.
Thanks for your time.
MainPage.jspx
=====================
Here I have a selection box, and based on the user selection I include different JSPX pages. The page Definition of this page
contains all the executables and the bindings of the included pages also.
<af:selectOneChoice value="#{backing_Reports.measureSelected}"
label="Measure" unselectedLabel="Select One"
id="selectmeasure" autoSubmit="true"
immediate="true">
<af:selectItem label="Schedule Data"
value="Schedule.jspx"/>
<af:selectItem label="Budget Data"
value="Budget.jspx"/>
</af:selectOneChoice>
<af:panelGroup>
<jsp:include page="${backing_Reports.measureSelected}" flush="true"/>
</af:panelGroup>
Faces Config:
===================
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>GlobalHome</from-outcome>
<to-view-id>/pages/Welcome.jspx</to-view-id>
<redirect/>
</navigation-case>
<navigation-case>
<from-outcome>GlobalReports</from-outcome>
<to-view-id>/reports/MainPage.jspx</to-view-id>
</navigation-case>

<managed-bean>
<managed-bean-name>menuItem_Reports</managed-bean-name>
<managed-bean-class>cs.view.menu.MenuItem</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>label</property-name>
<value>#{resources['scorecard.menu.reports']}</value>
</managed-property>
<managed-property>
<property-name>viewId</property-name>
<value>/reports/MainPage.jspx</value>
</managed-property>
<managed-property>
<property-name>outcome</property-name>
<value>GlobalReports</value>
</managed-property>
</managed-bean>
:

We have solved this, temproarily. But don't know if this is the best method to do this. Please post if somepne has a better way of doing this.
While debugging we found that the ${backing_Reports.measureSelected} field which was set to a default value in backing bean was returned as null when the page renders for the first time. So we had a work around like this in our MainPage.jspx
<af:panelBox width="80%" partialTriggers="selectmeasure"
inlineStyle="margin:40.0px;">
<af:panelGroup>
<jsp:include page="${backing_Reports.measureSelected==null?'BlankPage.jspx':backing_Reports.measureSelected}"
flush="true"/>
</af:panelGroup>
</af:panelBox>
Thanks.

Http error 403 while using servletrunner

Hello Friends,
I am getting the above mentioned error(Http error 403- forbidden) while trying to connect to servlet runner running at 8080 in my system. I downloaded jsdk2.0 and trying out some examples. Am I supposed to get a page once I try http://localhost:8080?
Please respond ASAP
Thank You All
Santhosh

have a look to the file web.xml in your webapps WEB-INF directory.
here you have to define the servlets
<servlet>
<servlet-name>test</servlet-name>
<servlet-class>your.package.YourServlet</servlet-class>
</servlet>after having declared the servlet you could add a mapping - means an url expression which invokes your servlet:
<servlet-mapping>
<servlet-name>test</servlet-name>
<url-pattern>test/test</url-pattern> 
</servlet-mapping>the way you used uses a default servlet invoker. means: if you enter /servlet/xyz the invoker will search for a ServletClass called xyz and invoke this servlet.
depending on what server you use the url http://localhost:8080 will return the servers "welcomd page"

HTTP Error 403.1

I am following a flash from to database via asp tutorial.
When I try to test the asp code in the browser I get this message.
"You have attempted to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to
be executed.
HTTP Error 403.1 - Forbidden: Execute access is denied.
Internet Information Services (IIS)"
I don't get it. I have the execute permissions set to allow
scripts AND executables in IIS.
ANyone know what could be wrong?
To top it off I do have a fully functional html input form to
database and data management pages that work fine in the same
directory. Its just this testing of the flash form.

Thr problem is that you must set Execute rights to the IIS web at the
Configuration settings (exactly as seen in the documentation).
"Davide Bruzzone" <[email protected]> ha scritto nel messaggio
news:8iubob$mgp$[email protected]..
I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing theMicrosoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my defaultWeb
site. This didn't help. I even tried creating a directory calledpublic_html
inside public_html, setting execute privilages on it, and putting a copyof
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl andwalk.
>
Cheers...
Dave Bruzzone
WebCredenza, Inc.
[isapi2.gif]

Http error 403.16

HTTP Error 403.16 - Forbidden: Client certificate is ill-formed or is not trusted by the Web server.

The server requires you to have a client certificate for access. You don't have it. Contact the server administrator to find out how to get such a certificate.

KM Access via URL aborts with HTTP Error 403

Dear experts,
i am currently working on the following problem:
- we want to use 'KM Deep Links' to documents (open documents via URL Access)
- when people are authenticated they can use this deep links (no problem in this case)
- when they are not authenticated -> HTTP Error 403 is displayed
     -> we want a login form to be displayed and after successful authentication the document is displayed
- example:
     http://localhost:50000/irj/go/km/docs/documents//SAP%20Portal%20Documents/Members%20Area/Contracts%20_%20Guidelines/example.pdf
This is our scenario:
- Our Portal is a SAP Nw 7.0 with SP20
- We run an External Facing Portal and therefore we have applied SAP Note 837898 (Standard Configuration in current SPS)
   -> URL Access to Documents to which Anonymous Users have access works fine
- as a test we used the 'old Content Acess Path' mentioned in SAP Note 837898, which looks like this:
     http://localhost:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents//SAP%20Portal%20Documents/Members%20Area/Contracts%20_%20Guidelines/example.pdf
       - this access works as desired. Login Form is prompted and after authentication, the document is displayed. Problem here is that this Content Access Path doesn't work with Anonymous Access to KM.
So the goal is: Display Login form instead of this Error 403 Page. What configuration mistakes could we have done?
With best regards,
Marcus
Edited by: Marcus Böhm on Jan 25, 2010 12:08 PM

Update:
He tried a file extension other than txt or htm/html, and he still gets the error.
He also tried fiddling with IE -- Internet Options -- Languages to remove extraneous languages, and he still gets the error.

UPK - Player gives HTTP Error 403 error

I have created a animation using UPK. A player.exe was generated. It was playing fine on my local drive but when I post it to shared interface it gives me this error -
Contact localhost:3282 home
HTTP Error 403 - Forbidden
Internet Explorer
Have anyone of you encountered this? Please help.
Thanks

Jay,
You should use this URL:
https://ipaddress/certsrv/mscep
If you try to get the cert from an http address, you will get an error. You should be using https. Also, the mscep.dll should not be part of the URL.
You can test this connectivity from any browser by putting that URL in the sddress bar. You should see a page similar to this:
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Example Basicresponse: HTTP Error 403 - Forbidden

Hi,
i installed the developer edition of ocms.
The eclipse plugin works fine.
I was able to deploy the "thirdpartycallcontrol" and to access it via http://localhost:8888/tpcc.
BUT
the basicresponse example does not work. I can deploy it but on
http://localhost:8888/basicresponse
i get HTTP Error 403 - Forbidden
Is this not accessible via webfrontend?
How can i see if this is working? In the documentation the use case is missing....

Hi HEWizard,
Basicresponse is a SIP only application, hence it's not available via a web front end. It can be accessed via a test SIP testing tool such as sipp: http://sipp.sourceforge.net/
Hope this helps,
Adam

Safari HTTP error 403

I am connected to the internet - email works fine, evernote syncronises etc. But on ANY web page I am getting a HTTP Error 403: The service you requested is restricted and is not available to your browser.
The restriction can be based on your IP address, hostname, browser software, time of day of other variables well.
IP address - Works for other services
hostname - not sure how this impacts anything
browser software - brand new Pad2 - should be ok - Apple?
time of day - erm just how is this important
other variables - ah - probably that then -
Anyone seen this before?
Greg

Error 403 means that you don't have the permission to view that particular page.
You can try these steps.
Go step by step and test.
Quit Safari.
Hold the shift key down and relaunch Safari.
Delete cookies
Safari > Preferences > Privacy > Cookies and other website data:
Press the “Remove All Website Data” button.
It will take a while to finish.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.

HTTP error [403] in "Add Forums Administrator User"-iView (Forum)

Similar Messages

Maybe you are looking for