HTTP Error 500.24 - Internal Server Error on Web service sdk

Hi, I have installed the mfa server on premise and tested successfully with sms and phone call. I wanted to try the Mobile app so I installed the Web service en the Mobile app according to instructions (changed the web.config with username
and password and url of web service sdk) but when I try to activate the app I get an error related to the web service sdk (also when I try the TestPfWsSdkConnection) : the error says
HTTP Error 500.24 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I try several thing but no luck.
Windows server 2012 R2 with iis 8.5
Anybody an idea of what I am doing wrong? Thanks
Andrea

Having the same problem, I see you marked yours as answered with no replies. Can you share what you did to resolve the problem?
Regards,
Steve Angell - IAM Practice Director http://www.InfraScience.com)

Similar Messages

HTTP error 500: Internal server error: In OAC0 tcode - CS Admin button.

Hi,
In our ecc system, when I go to OAC0 TCode and click the button CS Admin, it does open the page "Content Server administration" but on the bottom bar I always see error "HTTP error 500: Internal server error".
I want to know if this is normal. We have setup archiving a few years back.
The Archive database is Filenet system and using websphere web server.
Thanks.

Thanks you But ys, the backend archive server (in this case Filenet along with Websphere) is up and running all the time.
How do I check content repository connection?? is it in OAC0? If yes then we did it and it works fine.
We have also resent the certificate from OAC0 and it got imported at their end too. Yes our SAP system got refreshed but after that we created new entry in strustsso2 and exchanged the certificate. But till date I have always seen HTTP 500 on the "Content Server administration", enen on production server. Not sure if this is normal.
Apart from this, on non production systems we are unable to perform any kind of archiving too. We get HTTP500 whenever we run a Store Job.
Regards,

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HTTP error: 500 (Internal Server Error) while creating content server repst

Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineeth

hi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u....

HTTP error: 500 Internal Server Error 0

Hi,
I've upgraded a third party server.
Everything was working fine before the upgrade.
But now when I go to OAC0,
if I do "test Connection" it is sucessful
but when I send a certificate it says
"HTTP error: 500 Internal Server Error 0"
I've tried
1. adding the server name in host file.
2. tried configuring the R/3 systems
3. configuring the R/3 gatways
4. testing the connection from the archive server.
everything is working fine.
But still i get the error
Pleae advice
Edited by: Gautam Samant on Sep 18, 2008 12:29 PM

Hi anirudh
The details are :
I'm trying to connec SAP R/3 to IXOS 9.6.1.
The database used is MS SQL 2000 SP4.
I've sucessfully configured the archive databse, archive server, everything.
I've even updated the database to match with IXOS.
The connection testing from both ends are working fine.
But when i try to send a certificate from SAP to IXOS,
its showing 500: internal server error.
What might be the reason?
Regards,
Gautam
Edited by: Gautam Samant on Sep 25, 2008 2:33 PM

Http code 500 internal server error

Hi all!
I hope someone can help me out.
A few days ago Windows crashed (some Explorer failure) and I had to restore Vista back on my pc. I also had to reinstall DW CS3. It all used to work fine but now I get an '500 internal server error'. When I fill in the data in the 'manage sites' and I test my connections (both remote and testing server) it connects fine. When I make a new recordset and test it, I get the error:
Has anybody had this problem? I do not know what to do anymore.
Thanks in advance, with the best regards from Holland,
Martijn

Hi,
Yes, I'm referring to the DSN's setup on the remote server.
I'm getting fed up with this bug....
Martin
Date: Wed, 8 Jul 2009 15:08:24 -0600
From: [email protected]
To: [email address deleted by Moderator]
Subject: Dreamweaver Application Development http code 500 internal server error
I'm also getting an HTTP 500 error from the server, even though the recordset tested successfully,
and the records were displayed in Live View. The server can process ASP, it displays pages created
with ASPMaker. In your reply, are you referring to the DSN's set up on the remote server?
Thanks.
Joe
>

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server error)

Hi,
When i am executing the Client proxy in ABAP, i am getting SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server error).
how to resolve it, can any one help.
Thanks & Regards,
Brahmaji.

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")    Exception of class CX_AI_SYSTEM_FAULT

Hi All,
        while Running Client Proxies from se80 im getting Following error. i already checked all the Services All are active only. can any one suggest me:
SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")
Exception of class CX_AI_SYSTEM_FAULT
RFC Trace:
**** Trace file opened at 20140630 124650 IST, by disp+work
    **** Versions SAP-REL 721,0,201 RFC-VER U 3 1460390 MT-SL
    XRFC> Begin of user trace
    XRFC>
    XRFC>
<
    XRFC> TRACE SOAP RUNTIME - header
<
    XRFC>
<
    XRFC>
    XRFC> SESSION_ID : 0002425553A5ECFC63B114C4E1000000C0A80141
    XRFC> TS_CALL
: 20140630071647.5930180
<
    XRFC> SY_UNAME   : SAPADMIN
<
    XRFC> HOSTNAME   : SOLAR-DEV
<
    XRFC> SY_SID
: DEV
<
    XRFC> SY_MANDT   : 001
<
    XRFC> SYS_NR
: 01
<
    XRFC> APPLSERVER : SOLAR-DEV_DEV_01
<
    XRFC> ISPRESCHED : X
<
    XRFC> PARENT_ID : ROOT_CALL_ID
<
    XRFC> REQ_SIZE   : 1821
<
    XRFC> RESP_SIZE : 75
<
    XRFC> DURATION   : 2246
<
    XRFC> NETHDRTIME : 2246
<
XRFC> CALL_STATE : 2
<
XRFC> ERRORTYPE : SYSFAIL
<
XRFC> ERRORAREA : COREMSG
<
XRFC> CTXDP_TYPE : SOAP_RUNTIME
<
XRFC> SYNC_ASYNC : S
<
XRFC> LOCATION   : C
<
XRFC> DIRECTION : O
<
XRFC> REQ_ID
: 52EDA553B163C414E1000000C0A80141
<
XRFC> RESP_ID
: 00000000000000000000000000000000
<
XRFC> MSG_STATE : 114
<
XRFC> IF_NAME_I : YSCO_SAPORDERS_SOAP
<
XRFC> IF_NS_E
<
XRFC> IF_NAME_E :
<
XRFC> ISSHORTCUT :
<
XRFC> TRC_PATT   : WSTEST
<
XRFC> TRC_KEY
: 50EDA553B163C414E1000000C0A80141
<
XRFC> TRC_SSID   : DEV_01
<
XRFC> TRC_USER   : SAPADMIN
<
XRFC> TRC_TS
: 20140630071647
<
XRFC> TRC_COUNT : 98
<
XRFC> TRC_EXT
<
XRFC> COMPLETE   : OK
<
XRFC> CALLEDPROG : YSCO_SAPORDERS_SOAP
<
XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:client
<
XRFC> CONF_ID
<
XRFC> BIND_ID
<
XRFC> OP_NAME
: InsertPPOrders_Development
<
XRFC> COMM_PATRN : Method:InsertPPOrders_Development
<
XRFC> OP_NS
: http://microsoft.com/webservices/
<
XRFC> REMADDRESS :
<
XRFC> LP_NAME
: YSLP1
<
XRFC> DT_OBJ
: YSCO_SAPORDERS_SOAP
<
XRFC> MEMCONSUMP : 198
<
XRFC> BONAME
<
XRFC> PROCCOMP   :
<
XRFC> DEPLOYUNIT :
<
XRFC>       <
XRFC>
<
XRFC> TRACE SOAP RUNTIME - trace records
<
XRFC>
<
XRFC>       <
XRFC> E SOAP_RUNTIME 20140630071649.8380110 : CL_SOAP_RUNTIME_CLIENT
<
XRFC> ->EXECUTE_PROCESSING Exception handling in SOAP runtime
<
XRFC>
<
XRFC>
<
XRFC> E SOAP_APPLICATION 20140630071649.8382410 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING Exception
<
    XRFC> handling in SOAP runtime
<
    XRFC>
<
    XRFC>
<
    XRFC> E HTTP_TRANSPORT_BINDING 20140630071649.8368980 : CL_SOAP_HTTP
<
    XRFC> _TPBND_ROOT ->HANDLE_STATUS_CODE Received return code 500 (
<
    XRFC> Internal Server Error )
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_RUNTIME 20140630071649.8379970 : CL_SOAP_RUNTIME_CLIENT
<
    XRFC> ->EXECUTE_PROCESSING A SOAP Runtime Core Exception occurred in
<
    XRFC> method get_http_headers of class CL_SOAP_HTTP_TPBND_ROOT at
<
    XRFC> position id 3 with internal error id 1026 and error text SRT:
<
    XRFC> HTTP-Code 500: ("Internal Server Error") (fault location is 1 ).
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_APPLICATION 20140630071649.8382290 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING A SOAP Runtime <
    XRFC> Core Exception occurred in method get_http_headers of class
<
    XRFC> CL_SOAP_HTTP_TPBND_ROOT at position id 3 with internal error id
<
    XRFC> 1026 and error text SRT: HTTP-Code 500: ("Internal Server Error")   <
    XRFC> (fault location is 1 ).
<
    XRFC>
<
Find The Attachment for error:

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error

Can someone give my a hand with this problem because the unix administrator of my website don't know how to fixes.
When I try to run a servlet name SimpleServer or other servlet from my website I received the following error:
Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error
type Exception report
message Internal Server Error
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot allocate servlet instance for path /servlet/SimpleServlet
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:419)
     at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:458)
     at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:551)
     at java.lang.Thread.run(Thread.java:484)
root cause
java.lang.ClassFormatError: SimpleServlet (Illegal constant pool type)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
     at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1643)
     at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:937)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1372)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1254)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:867)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:655)
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:400)
     at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:458)
     at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:551)
     at java.lang.Thread.run(Thread.java:484)
Thanks in advance,
Jose

Hi,
ClassFormatError is Thrown when the Java Virtual Machine attempts to read a class file and determines that the file is malformed or otherwise cannot be interpreted as a class file.
So check whether you have properly configured servlet and whether class file is VALID and is in right place or not.
Sandesh

HTTP Error 500: Internal Server Error

When going to webmail.nc.rr.com I get HTTP Error 500: Internal Server Error.

Hello,
This error is usually caused when people are on a BES (as opposed to BIS).
The BES needs to be reconfigured to allow the Proxy to allow you access.
The MDS needs to have configuration changes.
Sometimes this is caused by your Blackberry server being an earlier version than 3.6. Upgrading to BES 3.6 or later will fix this issue (http://www.blackberry.com/btsc/KB02025).
Alos, get your BES ADMin to refer to the following link and see the note at the bottomof the webpage:
(Note: Incorrect or invalid encryption types within the krb5.conf file can result in HTTP 500 errors when attempting to browse to websites that require Kerberos authentication.)
http://www.blackberry.com/btsc/KB15642
Hope that helps!
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Cannot use XML Forms Builder - HTTP response: 500 - Internal Server Error

Hi,
I am trying to use XML Forms Builder, have added the corresponding role to my profile and when I create a new application or do anything I get the following error popup:
HTTP response: 500 - Internal Server Error.
What should I do ??
Thank you for your help.
Thibault Schalck

Hi,
Check the below link for environment checking of XML Form Builder
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/9c8f411467ac5fe10000000a1550b0/frameset.htm
Raghu

Forms Builder - HTTP Response: 500 - Internal Server Error

Hello,
When starting the Forms Builder in our dev environment, the new java window pops up and I get a an error pop up that says:HTTP Response: 500 - Internal Server Error.
I click OK on this and it comes back several times. After a while the forms builder displays, but there is no connection to the server. I do not have this problem in our stage system.
Does anyone know how to rememdy this?
Thanks,
Chris.

When I run the check tool in the dev environment, it performs several of the tests and then states "all tests performed successfully". None of the lights turn green. It says it successfully downloads the jar files, but says that the XML forms server version is 'null'. The load global settings and project list tests were not even started.
When I do the same for our stage environment, all the tests ARE performed and all the lights turn green.
Thanks,
Chris.

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I get this when I try to enter a record into one of our Access databases, what do I need to do to fix it, I don't know what it means

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I don't know what this means or how to fix it, I get it when I try to enter a ticket into one of our custom data bases in Access

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I don't know what this means or how to fix it, I get it when I try to enter a ticket into one of our custom data bases in Access

RPAS Web Deployment - Error 500--Internal Server Error

Trying to install the RPAS Client 13.2 via the Web Deployment using Weblogic WITHOUT Single SignOn (SSO).
The RPAS.war file was un-jarred, propfile modified and re-jarred. The RPAS.war file was deployed into Weblogic (10.3.2) and is active. When I try to run the RPAS Web Config from Iexplorer, I received the following error message:
Error 500--Internal Server Error
java.lang.NullPointerException
     at com.retek.mdap.server.servlet.ServletManager.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Here's the modified propfile:
# The following locations must be configured by administrators based on their
# installation
# /nfs/path/to/data/RPASWebData
# /app/weblogic/rpas132
dbPath=/app/weblogic/rpas132/RPASWebData/db
clientSourceDir=/app/weblogic/rpas132/RPASWebData/client
tunnelLogFile=/app/weblogic/rpas132/RPASWebData/logs/tunnel.NDCVRPASP02.PRODUCTION.FR-PROD.XX.COM.log
webLogFile=/app/weblogic/rpas132/RPASWebData/logs/rpasPortal.NDCVRPASP02.PRODUCTION.FR-PROD.XX.COM.log
isOSSO=false
debug=false
classicMode=false
launchPreinstalledOnly=false
supportMultipleVersions=false
defaultInstallDir=C:\\RPASClient
Edited by: user1438559 on Oct 20, 2010 7:20 AM
Edited by: user1438559 on Oct 20, 2010 7:22 AM
Edited by: user1438559 on Oct 20, 2010 7:22 AM

Addition to my original issue...
Since I could not get the RPAS Web Deployment to work on WebLogic Server (without SSO Support), I thought I would try the install on Apache Tomcat.
This worked out of the box without any issues, so it seems my issue is on the WebLogic Server. Does anyone have any feedback on why it doesn't work on WebLogic?

Error 500--Internal Server Error when running Facelet in Local Server

Hi Experts,
I have installed M2E plugin for eclipse and working on a Maven project in OEPE 12c.
Running the facelet on the remote server , the results are returned, wheras running the facelet in the local server , the below error occurs
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.getMetadataFacelet(DefaultFaceletFactory.java:209)
at com.sun.faces.application.view.ViewMetadataImpl.createMetadataView(ViewMetadataImpl.java:114)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:233)
Could anybody share some pointers?
Thanks,
Vijaya

I created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya

Error 500--Internal Server Error:How to modify req.setReportAbsolutePath

I test a servlet but I get following errors. I use OBIEE 11g and Jdeveloper 11.1.1.3
How to modify the source code and the req.setReportAbsolutePath?
===============error====================
http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
Error 500--Internal Server Error
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
========source code============
package mywebcenter;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.DeliveryRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.LocalDeliveryOption;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportService;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceClient;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceService;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportResponse;
import com.oracle.xmlns.oxp.service.publicreportservice.ScheduleRequest;
import java.io.IOException;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.URL;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.xml.namespace.QName;
public class BipServletTest extends HttpServlet {
private static final String CONTENT_TYPE =
"text/html; charset=windows-1252";
private static PublicReportServiceService publicReportServiceService;
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
response.setContentType(CONTENT_TYPE);
OutputStream os = response.getOutputStream();
//PrintWriter out = response.getWriter();
String sid = "";
System.out.println("===57===");
publicReportServiceService = new PublicReportServiceService(new URL("http://localhost:9704/xmlpserver/services/PublicReportService"),
new QName("http://xmlns.oracle.com/oxp/service/PublicReportService",
"PublicReportServiceService"));
PublicReportService publicReportService =
publicReportServiceService.getPublicReportService();
//To get a session id
System.out.println("===64===");
try {
sid = this.getSessionID("weblogic", "welcome1", publicReportService);
} catch (AccessDeniedException_Exception e) {
System.out.println("invalid user");
//To generate a report and display it
System.out.println("===72===");
ReportResponse res = this.getReportInSession(publicReportService, sid);
byte[] binaryBytes = res.getReportBytes();
os.write(binaryBytes);
response.setContentType(res.getReportContentType());
public String getSessionID(String username, String password, PublicReportService publicReportService) throws AccessDeniedException_Exception {
String sid = publicReportService.login(username, password);
return sid;
public ReportResponse getReportInSession(PublicReportService publicReportService,
String sid) {
ReportRequest req = new ReportRequest();
ReportResponse res = new ReportResponse();
System.out.println("===89===");
req.setAttributeFormat("pdf");
req.setAttributeLocale("en-US");
req.setAttributeTemplate("Simple");
req.setReportAbsolutePath("E:\\OracleBI_win2008_32_20101206\\user_projects\\domains\\bifoundation_domain\\config\\bipublisher\\repository\\Reports\\Samples\\11g Overview\\W2 2010.xdo");
//req. setSizeOfDataChunkDownload (-1); //download all
try {
System.out.println("99");
res = publicReportService.runReportInSession(req, sid);
System.out.println("101");
System.out.println("===100==="+res.getReportContentType());
} catch (Exception e) {
System.out.println(e);
System.out.println("===107===");
return res;
============Jdeveloper console==================
[Another instance of the application is running on the server. JDeveloper redeploy the application.]
[Application Application4 stopped but not undeployed from Server Instance IntegratedWebLogicServer]
[Running application Application4 on Server Instance IntegratedWebLogicServer...]
[12:45:14 PM] ---- Deployment started. ----
[12:45:14 PM] Target platform is (Weblogic 10.3).
[12:45:14 PM] Retrieving existing application information
[12:45:14 PM] Running dependency analysis...
[12:45:14 PM] Deploying 2 profiles...
[12:45:15 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4\Project4WebApp.war
[12:45:15 PM] WARNING: Connection ApplicationDB has no password. ApplicationDB-jdbc.xml file not generated for connection ApplicationDB.
[12:45:15 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4
[12:45:15 PM] Redeploying Application...
[12:45:17 PM] Application Redeployed Successfully.
[12:45:17 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[12:45:17 PM] http://192.168.1.17:7101/Application4-Project4-context-root
[12:45:17 PM] Elapsed time for deployment: 4 seconds
[12:45:17 PM] ---- Deployment finished. ----
Run startup time: 3547 ms.
[Application Application4 deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
===57===
===64===
===72===
===89===
99
javax.xml.ws.soap.SOAPFaultException: oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.xdo.servlet.CreateException: Report definition not found:E:\OracleBI_win2008_32_20101206\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Samples\11g Overview\W2 2010.xdo
===107===
<Dec 8, 2010 12:45:24 PM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 12:45:24 PM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Dec 8, 2010 12:45:24 PM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Dec 8, 2010 12:45:24 PM PST SERVER = DefaultServer MESSAGE = [ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = WIN-IT8WDLG81KH TXID = CONTEXTID = 55211ca27b9d1dfd:bd42a62:12cc7606a10:-8000-000000000000009c TIMESTAMP = 1291841124147
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Dec 8, 2010 12:45:34 PM PST> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\administrator\appdata\roaming\jdeveloper\system11.1.1.3.37.56.60\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_12 with a lockout minute period of 1.>

am able to login
http://192.168.75.140:7001/console/login/LoginForm.jsp
from this environment-> servers-> all servers(adminserver,soa_server1, oim_server1, oam_server1) status is running,and health is ok.
I have started these servers from command line <base_domain/bin/sh startManagedWebLogic.sh oim_server1
result is <server started in running mode>
now I shutdown the oam_server1 and oim_server1
again I started the oim_server1 as above
command line result is < <May 30, 2013 7:54:47 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but in (http://localhost:7001/console) window oim_server1 status is unknown...

HTTP Error 500.24 - Internal Server Error on Web service sdk

Similar Messages

Maybe you are looking for