HTTP error 500: Internal server error: In OAC0 tcode - CS Admin button.

Hi,
In our ecc system, when I go to OAC0 TCode and click the button CS Admin, it does open the page "Content Server administration" but on the bottom bar I always see error "HTTP error 500: Internal server error".
I want to know if this is normal. We have setup archiving a few years back.
The Archive database is Filenet system and using websphere web server.
Thanks.

Thanks you But ys, the backend archive server (in this case Filenet along with Websphere) is up and running all the time.
How do I check content repository connection?? is it in OAC0? If yes then we did it and it works fine.
We have also resent the certificate from OAC0 and it got imported at their end too. Yes our SAP system got refreshed but after that we created new entry in strustsso2 and exchanged the certificate. But till date I have always seen HTTP 500 on the "Content Server administration", enen on production server. Not sure if this is normal.
Apart from this, on non production systems we are unable to perform any kind of archiving too. We get HTTP500 whenever we run a Store Job.
Regards,

Similar Messages

HTTP error: 500 Internal Server Error 0

Hi,
I've upgraded a third party server.
Everything was working fine before the upgrade.
But now when I go to OAC0,
if I do "test Connection" it is sucessful
but when I send a certificate it says
"HTTP error: 500 Internal Server Error 0"
I've tried
1. adding the server name in host file.
2. tried configuring the R/3 systems
3. configuring the R/3 gatways
4. testing the connection from the archive server.
everything is working fine.
But still i get the error
Pleae advice
Edited by: Gautam Samant on Sep 18, 2008 12:29 PM

Hi anirudh
The details are :
I'm trying to connec SAP R/3 to IXOS 9.6.1.
The database used is MS SQL 2000 SP4.
I've sucessfully configured the archive databse, archive server, everything.
I've even updated the database to match with IXOS.
The connection testing from both ends are working fine.
But when i try to send a certificate from SAP to IXOS,
its showing 500: internal server error.
What might be the reason?
Regards,
Gautam
Edited by: Gautam Samant on Sep 25, 2008 2:33 PM

HTTP error: 500 (Internal Server Error) while creating content server repst

Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineeth

hi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u....

Http code 500 internal server error

Hi all!
I hope someone can help me out.
A few days ago Windows crashed (some Explorer failure) and I had to restore Vista back on my pc. I also had to reinstall DW CS3. It all used to work fine but now I get an '500 internal server error'. When I fill in the data in the 'manage sites' and I test my connections (both remote and testing server) it connects fine. When I make a new recordset and test it, I get the error:
Has anybody had this problem? I do not know what to do anymore.
Thanks in advance, with the best regards from Holland,
Martijn

Hi,
Yes, I'm referring to the DSN's setup on the remote server.
I'm getting fed up with this bug....
Martin
Date: Wed, 8 Jul 2009 15:08:24 -0600
From: [email protected]
To: [email address deleted by Moderator]
Subject: Dreamweaver Application Development http code 500 internal server error
I'm also getting an HTTP 500 error from the server, even though the recordset tested successfully,
and the records were displayed in Live View. The server can process ASP, it displays pages created
with ASPMaker. In your reply, are you referring to the DSN's set up on the remote server?
Thanks.
Joe
>

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server error)

Hi,
When i am executing the Client proxy in ABAP, i am getting SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server error).
how to resolve it, can any one help.
Thanks & Regards,
Brahmaji.

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")    Exception of class CX_AI_SYSTEM_FAULT

Hi All,
        while Running Client Proxies from se80 im getting Following error. i already checked all the Services All are active only. can any one suggest me:
SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")
Exception of class CX_AI_SYSTEM_FAULT
RFC Trace:
**** Trace file opened at 20140630 124650 IST, by disp+work
    **** Versions SAP-REL 721,0,201 RFC-VER U 3 1460390 MT-SL
    XRFC> Begin of user trace
    XRFC>
    XRFC>
<
    XRFC> TRACE SOAP RUNTIME - header
<
    XRFC>
<
    XRFC>
    XRFC> SESSION_ID : 0002425553A5ECFC63B114C4E1000000C0A80141
    XRFC> TS_CALL
: 20140630071647.5930180
<
    XRFC> SY_UNAME   : SAPADMIN
<
    XRFC> HOSTNAME   : SOLAR-DEV
<
    XRFC> SY_SID
: DEV
<
    XRFC> SY_MANDT   : 001
<
    XRFC> SYS_NR
: 01
<
    XRFC> APPLSERVER : SOLAR-DEV_DEV_01
<
    XRFC> ISPRESCHED : X
<
    XRFC> PARENT_ID : ROOT_CALL_ID
<
    XRFC> REQ_SIZE   : 1821
<
    XRFC> RESP_SIZE : 75
<
    XRFC> DURATION   : 2246
<
    XRFC> NETHDRTIME : 2246
<
XRFC> CALL_STATE : 2
<
XRFC> ERRORTYPE : SYSFAIL
<
XRFC> ERRORAREA : COREMSG
<
XRFC> CTXDP_TYPE : SOAP_RUNTIME
<
XRFC> SYNC_ASYNC : S
<
XRFC> LOCATION   : C
<
XRFC> DIRECTION : O
<
XRFC> REQ_ID
: 52EDA553B163C414E1000000C0A80141
<
XRFC> RESP_ID
: 00000000000000000000000000000000
<
XRFC> MSG_STATE : 114
<
XRFC> IF_NAME_I : YSCO_SAPORDERS_SOAP
<
XRFC> IF_NS_E
<
XRFC> IF_NAME_E :
<
XRFC> ISSHORTCUT :
<
XRFC> TRC_PATT   : WSTEST
<
XRFC> TRC_KEY
: 50EDA553B163C414E1000000C0A80141
<
XRFC> TRC_SSID   : DEV_01
<
XRFC> TRC_USER   : SAPADMIN
<
XRFC> TRC_TS
: 20140630071647
<
XRFC> TRC_COUNT : 98
<
XRFC> TRC_EXT
<
XRFC> COMPLETE   : OK
<
XRFC> CALLEDPROG : YSCO_SAPORDERS_SOAP
<
XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:client
<
XRFC> CONF_ID
<
XRFC> BIND_ID
<
XRFC> OP_NAME
: InsertPPOrders_Development
<
XRFC> COMM_PATRN : Method:InsertPPOrders_Development
<
XRFC> OP_NS
: http://microsoft.com/webservices/
<
XRFC> REMADDRESS :
<
XRFC> LP_NAME
: YSLP1
<
XRFC> DT_OBJ
: YSCO_SAPORDERS_SOAP
<
XRFC> MEMCONSUMP : 198
<
XRFC> BONAME
<
XRFC> PROCCOMP   :
<
XRFC> DEPLOYUNIT :
<
XRFC>       <
XRFC>
<
XRFC> TRACE SOAP RUNTIME - trace records
<
XRFC>
<
XRFC>       <
XRFC> E SOAP_RUNTIME 20140630071649.8380110 : CL_SOAP_RUNTIME_CLIENT
<
XRFC> ->EXECUTE_PROCESSING Exception handling in SOAP runtime
<
XRFC>
<
XRFC>
<
XRFC> E SOAP_APPLICATION 20140630071649.8382410 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING Exception
<
    XRFC> handling in SOAP runtime
<
    XRFC>
<
    XRFC>
<
    XRFC> E HTTP_TRANSPORT_BINDING 20140630071649.8368980 : CL_SOAP_HTTP
<
    XRFC> _TPBND_ROOT ->HANDLE_STATUS_CODE Received return code 500 (
<
    XRFC> Internal Server Error )
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_RUNTIME 20140630071649.8379970 : CL_SOAP_RUNTIME_CLIENT
<
    XRFC> ->EXECUTE_PROCESSING A SOAP Runtime Core Exception occurred in
<
    XRFC> method get_http_headers of class CL_SOAP_HTTP_TPBND_ROOT at
<
    XRFC> position id 3 with internal error id 1026 and error text SRT:
<
    XRFC> HTTP-Code 500: ("Internal Server Error") (fault location is 1 ).
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_APPLICATION 20140630071649.8382290 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING A SOAP Runtime <
    XRFC> Core Exception occurred in method get_http_headers of class
<
    XRFC> CL_SOAP_HTTP_TPBND_ROOT at position id 3 with internal error id
<
    XRFC> 1026 and error text SRT: HTTP-Code 500: ("Internal Server Error")   <
    XRFC> (fault location is 1 ).
<
    XRFC>
<
Find The Attachment for error:

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error

Can someone give my a hand with this problem because the unix administrator of my website don't know how to fixes.
When I try to run a servlet name SimpleServer or other servlet from my website I received the following error:
Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error
type Exception report
message Internal Server Error
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot allocate servlet instance for path /servlet/SimpleServlet
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:419)
     at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:458)
     at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:551)
     at java.lang.Thread.run(Thread.java:484)
root cause
java.lang.ClassFormatError: SimpleServlet (Illegal constant pool type)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
     at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1643)
     at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:937)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1372)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1254)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:867)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:655)
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:400)
     at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:458)
     at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:551)
     at java.lang.Thread.run(Thread.java:484)
Thanks in advance,
Jose

Hi,
ClassFormatError is Thrown when the Java Virtual Machine attempts to read a class file and determines that the file is malformed or otherwise cannot be interpreted as a class file.
So check whether you have properly configured servlet and whether class file is VALID and is in right place or not.
Sandesh

HTTP Error 500: Internal Server Error

When going to webmail.nc.rr.com I get HTTP Error 500: Internal Server Error.

Hello,
This error is usually caused when people are on a BES (as opposed to BIS).
The BES needs to be reconfigured to allow the Proxy to allow you access.
The MDS needs to have configuration changes.
Sometimes this is caused by your Blackberry server being an earlier version than 3.6. Upgrading to BES 3.6 or later will fix this issue (http://www.blackberry.com/btsc/KB02025).
Alos, get your BES ADMin to refer to the following link and see the note at the bottomof the webpage:
(Note: Incorrect or invalid encryption types within the krb5.conf file can result in HTTP 500 errors when attempting to browse to websites that require Kerberos authentication.)
http://www.blackberry.com/btsc/KB15642
Hope that helps!
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Cannot use XML Forms Builder - HTTP response: 500 - Internal Server Error

Hi,
I am trying to use XML Forms Builder, have added the corresponding role to my profile and when I create a new application or do anything I get the following error popup:
HTTP response: 500 - Internal Server Error.
What should I do ??
Thank you for your help.
Thibault Schalck

Hi,
Check the below link for environment checking of XML Form Builder
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/9c8f411467ac5fe10000000a1550b0/frameset.htm
Raghu

Forms Builder - HTTP Response: 500 - Internal Server Error

Hello,
When starting the Forms Builder in our dev environment, the new java window pops up and I get a an error pop up that says:HTTP Response: 500 - Internal Server Error.
I click OK on this and it comes back several times. After a while the forms builder displays, but there is no connection to the server. I do not have this problem in our stage system.
Does anyone know how to rememdy this?
Thanks,
Chris.

When I run the check tool in the dev environment, it performs several of the tests and then states "all tests performed successfully". None of the lights turn green. It says it successfully downloads the jar files, but says that the XML forms server version is 'null'. The load global settings and project list tests were not even started.
When I do the same for our stage environment, all the tests ARE performed and all the lights turn green.
Thanks,
Chris.

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I get this when I try to enter a record into one of our Access databases, what do I need to do to fix it, I don't know what it means

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I don't know what this means or how to fix it, I get it when I try to enter a ticket into one of our custom data bases in Access

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I don't know what this means or how to fix it, I get it when I try to enter a ticket into one of our custom data bases in Access

Error 500--Internal Server Error while trying to create a new DataModel

Infrastructure_: OBIEE 11.1.1.5 on 64 bit Linux (RHEL)
Issue:* We get Error 500--Internal Server Error whenever we try to create a new data model in BI Publisher.
Details:* We installed OBIEE 11.1.1.5 on 64 bit Linux machine. Whenever we try to create a new data model in BI Publisher, the page errors out with the message
"Error 500--Internal Server Error, From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request"
Edited by: user9544005 on Dec 29, 2011 7:02 AM

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

Error 500--Internal Server Error when running Facelet in Local Server

Hi Experts,
I have installed M2E plugin for eclipse and working on a Maven project in OEPE 12c.
Running the facelet on the remote server , the results are returned, wheras running the facelet in the local server , the below error occurs
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.getMetadataFacelet(DefaultFaceletFactory.java:209)
at com.sun.faces.application.view.ViewMetadataImpl.createMetadataView(ViewMetadataImpl.java:114)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:233)
Could anybody share some pointers?
Thanks,
Vijaya

I created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya

SharePoint List Error :[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)

When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew

Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren

Error 500--Internal Server Error:How to modify req.setReportAbsolutePath

I test a servlet but I get following errors. I use OBIEE 11g and Jdeveloper 11.1.1.3
How to modify the source code and the req.setReportAbsolutePath?
===============error====================
http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
Error 500--Internal Server Error
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
========source code============
package mywebcenter;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.DeliveryRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.LocalDeliveryOption;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportService;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceClient;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceService;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportResponse;
import com.oracle.xmlns.oxp.service.publicreportservice.ScheduleRequest;
import java.io.IOException;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.URL;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.xml.namespace.QName;
public class BipServletTest extends HttpServlet {
private static final String CONTENT_TYPE =
"text/html; charset=windows-1252";
private static PublicReportServiceService publicReportServiceService;
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
response.setContentType(CONTENT_TYPE);
OutputStream os = response.getOutputStream();
//PrintWriter out = response.getWriter();
String sid = "";
System.out.println("===57===");
publicReportServiceService = new PublicReportServiceService(new URL("http://localhost:9704/xmlpserver/services/PublicReportService"),
new QName("http://xmlns.oracle.com/oxp/service/PublicReportService",
"PublicReportServiceService"));
PublicReportService publicReportService =
publicReportServiceService.getPublicReportService();
//To get a session id
System.out.println("===64===");
try {
sid = this.getSessionID("weblogic", "welcome1", publicReportService);
} catch (AccessDeniedException_Exception e) {
System.out.println("invalid user");
//To generate a report and display it
System.out.println("===72===");
ReportResponse res = this.getReportInSession(publicReportService, sid);
byte[] binaryBytes = res.getReportBytes();
os.write(binaryBytes);
response.setContentType(res.getReportContentType());
public String getSessionID(String username, String password, PublicReportService publicReportService) throws AccessDeniedException_Exception {
String sid = publicReportService.login(username, password);
return sid;
public ReportResponse getReportInSession(PublicReportService publicReportService,
String sid) {
ReportRequest req = new ReportRequest();
ReportResponse res = new ReportResponse();
System.out.println("===89===");
req.setAttributeFormat("pdf");
req.setAttributeLocale("en-US");
req.setAttributeTemplate("Simple");
req.setReportAbsolutePath("E:\\OracleBI_win2008_32_20101206\\user_projects\\domains\\bifoundation_domain\\config\\bipublisher\\repository\\Reports\\Samples\\11g Overview\\W2 2010.xdo");
//req. setSizeOfDataChunkDownload (-1); //download all
try {
System.out.println("99");
res = publicReportService.runReportInSession(req, sid);
System.out.println("101");
System.out.println("===100==="+res.getReportContentType());
} catch (Exception e) {
System.out.println(e);
System.out.println("===107===");
return res;
============Jdeveloper console==================
[Another instance of the application is running on the server. JDeveloper redeploy the application.]
[Application Application4 stopped but not undeployed from Server Instance IntegratedWebLogicServer]
[Running application Application4 on Server Instance IntegratedWebLogicServer...]
[12:45:14 PM] ---- Deployment started. ----
[12:45:14 PM] Target platform is (Weblogic 10.3).
[12:45:14 PM] Retrieving existing application information
[12:45:14 PM] Running dependency analysis...
[12:45:14 PM] Deploying 2 profiles...
[12:45:15 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4\Project4WebApp.war
[12:45:15 PM] WARNING: Connection ApplicationDB has no password. ApplicationDB-jdbc.xml file not generated for connection ApplicationDB.
[12:45:15 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4
[12:45:15 PM] Redeploying Application...
[12:45:17 PM] Application Redeployed Successfully.
[12:45:17 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[12:45:17 PM] http://192.168.1.17:7101/Application4-Project4-context-root
[12:45:17 PM] Elapsed time for deployment: 4 seconds
[12:45:17 PM] ---- Deployment finished. ----
Run startup time: 3547 ms.
[Application Application4 deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
===57===
===64===
===72===
===89===
99
javax.xml.ws.soap.SOAPFaultException: oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.xdo.servlet.CreateException: Report definition not found:E:\OracleBI_win2008_32_20101206\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Samples\11g Overview\W2 2010.xdo
===107===
<Dec 8, 2010 12:45:24 PM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 12:45:24 PM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Dec 8, 2010 12:45:24 PM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Dec 8, 2010 12:45:24 PM PST SERVER = DefaultServer MESSAGE = [ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = WIN-IT8WDLG81KH TXID = CONTEXTID = 55211ca27b9d1dfd:bd42a62:12cc7606a10:-8000-000000000000009c TIMESTAMP = 1291841124147
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Dec 8, 2010 12:45:34 PM PST> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\administrator\appdata\roaming\jdeveloper\system11.1.1.3.37.56.60\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_12 with a lockout minute period of 1.>

am able to login
http://192.168.75.140:7001/console/login/LoginForm.jsp
from this environment-> servers-> all servers(adminserver,soa_server1, oim_server1, oam_server1) status is running,and health is ok.
I have started these servers from command line <base_domain/bin/sh startManagedWebLogic.sh oim_server1
result is <server started in running mode>
now I shutdown the oam_server1 and oim_server1
again I started the oim_server1 as above
command line result is < <May 30, 2013 7:54:47 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but in (http://localhost:7001/console) window oim_server1 status is unknown...

HTTP error 500: Internal server error: In OAC0 tcode - CS Admin button.

Similar Messages

Maybe you are looking for