HTTP error delivery Message: max transport attempts exceeded

Hi All,
DB:11.1.0.7
Oracle Apps:12.0.6
OS:IBM AIX
We are testing the DELL punch out functionality. As part of this, system is trying to send an XML output to the supplier and it is failing with the following error message.
We tried following two options( HTTP and SMTP) , in both cases it is failing.
For HTTP error Delivery Message: max transport attempts exceeded is the message shown.
For SMTP error Delivery Message: cannot send email
Could anyone please share such an experience faced before to resolve the issue.
Thanks for your time!
Regards,

Please post the complete error message.
Please see these docs.
Delivery of cXML PO's and Attachments to Suppliers [ID 252895.1]
OXTA Times Out before Successfully Sending Messages Outbound in Oracle Exchange [ID 252491.1]
CXML Documents Are Delivered But Delivery Status Is Not Updated in XML Gateway [ID 1073808.1]
Thanks,
Hussein

Similar Messages

  • Camera return to unknown HTTP error in Ni-Max during the IP axis camera detection.

    hello,
    i am facing problem regarding to connect IP axis camera with Ni-max, and I gor the error that camera return to the unknown HTTP error.
    Any one please guide me how can i solve this problem.
    In attachment I have attached the error screen shot pic. 
    thank you very much in advance.
    Attachments:
    error12.png ‏261 KB

    Hello,
    I am using labview 2012.
    and Max version is 5.4
    Ni-IMAQdx version is 4.0
    Here in attachment I have attached screen shot of available driver on my labview system.
    please guide me if any update or changes I have to do.
    I am getting this error.
    Error -1074360277 occurred at IMAQdx Open Camera.vi
    is there any suggestion how to solve this error.
    Attachments:
    driverlist.png ‏277 KB

  • HTTP error 0 testing not serving php pages please help

    Hello everyone,
    I am using DWCS3, the free version of MAMP on my MacBook Pro Leopard 10.5.6.
    I have built a customer registration form with a Transitional <!DOCTYPE>. I have been following the instructions from The Essential Guide to Dreamweaver CS3, using a wizard to build a registration form, in chapter 15.
    When I try to preview the form in the web browser, I get a white screen.
    When I click the live data button I get an; HTTP error 0 message occured while attempting to request the file http://localhost:8888/mywebsite/page_S9INUKZB.php from the testing server.
    possible reasons:
    1. Files in MacHD/Applications/MAMP/htdocs/mywebsite with .php extension are not being executed by the testing server.
    2. The MacHD/Applications/MAMP/htdocs/mywebsite does not map to http://localhost:8888/mywebsite URL on the testing server.
    I've gone over the site definitions several times and have configured MAMP differently twice, using ports 80 and 3306 and also 8888 and 8889. The same problem has happened in both instances here is my site definition info:
    Local info:
    Site name: mywebsite
    Local root folder: MacHD:Users:myname:Desktop:mywebsite
    links relative to document: http://localhost/
    Remote info:
    Access: Local/Network
    Remote folder: MacHD:Applications:MAMP:htdocs:mywebsite
    Testing server:
    Server model: PHP/MySQL
    Access: Local/Network
    Testing server folder: MacHD:Applications:MAMP:htdocs
    URL prefix: http://localhost:8888/mywebsite/
    Web sharing is turned off.
    Dreamweaver/Preferences/Preview in browser/preview using temporary files is turned off, yet in my HTTP error 0 message there is a string of characters after the page name, suggesting that dreamweaver is using temporary files.
    I have attached a compressed copy of the customer registration form maybe the problem is the page. I have gone round and round in circles with this and I can't seem to sort it out can somebody please help me.
    Thankyou.

    Hello David,
    Thanks for getting back to me, sorry for the late reply, I've been away for a few days.
    I have done what you suggested, and altered the links relative to document: http://localhost:8888/mywebsite/
    I have also restarted dreamweaver and mamp.
    Nothing has changed when I try to view the page through the browser I get a white screen and the HTTP error 0 is still displaying, With the same message as before.
    I have since created a new form, connected it to my user table, and populated the table with info, and that worked.
    I then added the php validating code as suggested in chapter 15, pages 481 through to 485. I've also checked the code against your example page register_user_03.php.
    However when I put the page on the testing server and try to view it, all I get is a white screen, and an HTTP error 0 the testing server is not executing pages with a .php extension. Or the URL prefix isn't mapped properly.
    I have also checked all my settings in MAMP and left a question on the forum but they haven't answered.
    Is there a setting or connection that I need to enable in Apache? I'm stumped.
    I'm hoping you might have some tricks up your sleeve.
    Thanks

  • I can't burn cd. When I try to burn a cd a message states "The attempt to burn a disc failed. An unknown error occurred. (4450) Anyone know what this means and how to repair it?

    I can't burn a cd from my ITunes playlist. When I try to burn a cd a message states "The attempt to burn a disc failed. An unknown error occurred. (4450)" How can I correct an unknown error?

    Hello rcrown01,
    The following articles can help get iTunes back to burning.
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Cheers,
    Allen

  • I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."

    I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."
    I'm still attempting to restore it, but the process goes as follows
    - Extracting software.
    - Waiting for iphone.
    - Preparing iphone software for restore.
    - Verifying iphone software.
    - Restoring iPhone software.
    It is at this point where it begins to load approxiamtely 10% and then freezes. I have had the handset connected 7 hours with no progress and this is my third attempt since Friday. Please help.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • Getting error message when I attempt to update my apps.  Error says This app Is Incompatible with this iPad.

    I am getting an error message when I attempt to update my apps.  It says "This App Is Incompatible with This iPad"  Have never had this problem before, any suggestions?

    Hello Jones The Steam
    Check the App to see what Apple ID it is associated with. If it is with another Apple ID, you would need to delete it and download it with your current Apple ID.
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Regards,
    -Norm G.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Error message while transporting the HR role

    All
    I was trying to move my HR role from Dev to QA.
    I got the error message from transport and not sure about it.
    Please let me know if you have any suggestions.
    Invalid organizational level $ORGEH deleted from role Z_ALL_MODULES_EXCEPT_BASIS_HR
    Invalid organizational level $ORGUNIT deleted from role Z_ALL_MODULES_EXCEPT_BASIS_HR
    Errors occurred during post-handling
    PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
    PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
    The errors affect the following components:
       BC-SEC-USR-PFC (Authorization and Role Management)
    Post-import method PRGN_AFTER_IMP_ACTGROUP_ACGR completed for ACGR L, date and time: 20071011162942

    Pranav,
    You can see a list of all org levels in table USORG
    There are standard SAP programs for adding or deleting org levels
    PFCG_ORGFIELD_CREATE
    PFCG_ORGFIELD_DELETE
    If you want these fields to be maintained as org levels then you need to make sure that you  have created them in all system.
    If you don't want these fields as org levels then you can delete them using the program I listed above.

  • WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

    Hello All,
    We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
    Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
    During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
    In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
    "soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
    As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
    used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with  parameters
    Module Key  =  soap
      Parameter Name  =  noSOAPMakeSysErrFromResponseFault
    Parameter Value  =  false
    and
    xmbws.No SOAPIgnoreStatus = true
    but not successful.
    Please help me. I got stcuk here.

    Hello Jannus,
    The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
    Please let me know the exact difference between soap and wsrm functionality in receiving end.
    By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
    Then i used message transform bean, but not successful.
    Regards,
    Ch.Venkat.

  • I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • Error in Webservice Call HTTP error (return code 404, message conn failed)

    Hi
    We wish to call  a standard EP7 webservice through ABAP.
    When we try to create consumer proxy , we get the following error.
    HTTP error (return code 404, message "conn failed")
    Message no. SPRX090
    ==> Display Error Document
    If you want to generate a proxy for an external WSDL document by specifying a URL, check that the proxy settings of the system are correct (transaction SICF - Client - Proxy Settings). If you want to generate a proxy for an XI Repository object, check the connection to the Enterprise Services Builder as follows:
    Check List for Setting Up a Connection to the Service Repository
    1. The address of the Enterprise Services Repository must be known in the SAP system
    Check with report SPROX_CHECK_IFR_ADDRESS
    The address is taken from the following parameters in the exchange profile ('Connections' section):
    com.sap.aii.connect.repository.name: Server (for example,pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (for example, 1080)
    com.sap.aii.connect.repository.contextroot: Root (for example,rep)
    The logon data is also read from the exchange profile ('ApplicationSystem' section):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    As an alternative to using the exchange profile, you can maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository. In this case, the Exchange Profile will even not be read.
    The RFC destination has to be set up using transaction SM59 and should look like this:
    RFC Destination: SAP_PROXY_ESR
    Connection Type: G (HTTP Connection to External Serv)
    Description1: ESR for Proxy Generation
    Target Host: esr_host
    Service No: 1080
    Path Prefix: rep
    Logon and Security:
    Basic Authentication: active
    User: esr_user
    Password: esr_password
    2. The HTTP Framework of the Web Application Server must function
    Check with report SPROX_CHECK_HTTP_COMMUNICATION
    If necessary, contact your system administrator. Please be aware of the fact, that the HTTP framework is depending on the application server. Thus the result of the report may differ for different application servers.
    3. Proxy generation must interpret the data of the Enterprise Services Repository correctly
    Check with report SPROX_CHECK_IFR_RESPONSE
    you can also login in dev and go to Xn se91
    enter msg id SPRX and msg no 090
    select the message and click on long text..
    you get the same message in a formatted manner..
    How to get rid of this ?
    Regards
    Rajendra

    Hi
    we have given the correct path as we have tested the webserive from
    other technology (.net) by providing the same path.
    regards
    Rajendra

  • Outlook for mac, message HTTP error resource not found 18596

    outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!!
    Help appreciated!!!!!!!!

    Same probelm any suggestions ????

  • B2B-50079 Transport Error : Bad Message

    Hi All,
    I have an SFTP outbound TPA which is used to transfer a PGP file from our internal system to TP vendor.
    So the transfer is as follows B2B(Internal System) -> WebServer(acts as proxy while connecting to third party server)-->ThirdParty.
    The use proxy is checked in the Channels of the Trading Partner.
    The transfer fails while transfering the file to the TP with the below error.
    "B2B-50079 Transport Error : Bad Message" I have manually sftpd from web server to the TP server and it is working absolutely fine.
    Also i have verified that the certificate and host,port username details to connect to the TP are correct.
    Please let us know on what the problem area could be.
    There is no problem with file naming convention since the file is getting picked up by the listening channel and also we have checked the preserve file name option in the TP channel.
    Any help on this is much appreciated.
    Thanks,
    Naveen Kumar T.

    Thanks Anuj for the response.
    We already have the required patch, also its working fine with other Trading partners which uses SFTP. We are facing this issue with only one Trading partner and the same is working fine with 10g B2B but not with 11g.
    Please let us know if there is any other configurations which we can check.
    Thanks,
    Sirisha

  • Internet Explorer - "Show friendly HTTP error messages"

    I have configured a servlet within web.xml to handle exceptions, and my servlet is indeed triggered when an exception occurs.
    My users are all running Internet Explorer. By default the advanced setting "Show friendly HTTP error messages" is enabled, which causes them to see an ugly MSIE error page rather than my carefully crafted servlet.
    They could see the awful exception pages Tomcat was handling out previously, which is why I set about making this change in the first place.
    I believe that Tomcat was not adding an error code header to the exception page it was handing out on my behalf, but now that I've taken over exception handling the response contains a code 500 response. (My best guess, anyhow.)
    I was going to simply strip this code out of the response, but upon inspection of the HttpServletResponse object, there is no method for doing such a thing.
    Is anyone familiar with this issue? Can anyone recommend a solution?
    Meanwhile, I'm off to continue scouring the forums before I start Googling again. =)
    Thanks!!

    Well, those "friendly" errors have to be based on the response code for the page. So if you have your own error handling returning a page, then you could return a 200 response code with whatever error content you want.
    For all practical purposes, the response code isn't very useful to users or browsers except for a few special ones maybe. But just because it's an error page to your web app doesn't mean it's an error for the browser. Those error codes are really meant for the HTTP protocol.

  • HT4623 When attempting to update I get an error - 37 message. What is this?

    When attenpting to update to ios6 I get an error-37 message. What does this mean?

    Also see
    https://discussions.apple.com/thread/3375853?start=15&tstart=0

Maybe you are looking for