HTTP Filter DLL E:\Program Files\SAP\ITS\6.20\programs\wgate.dll failed

Hi All,
I have installed fresh IIS 6.0 and 620 ITS on Windows Server 2003 (32-bit). While im trying to browse the link im getting service not available.
On event viewer i found below errors.
0000: c1 00 00 00 The HTTP Filter DLL E:\Program Files\SAP\ITS\6.20\programs\wgate.dll failed to load. The data is the error.
0000: c1 00 00 00 Could not load all ISAPI filters for site/service. Therefore startup aborted.
Could someone help us to resolve the problem
Deepak

Hi Vikas/Ashish,
It seems its all related to your Windows OS...When you see the above situation when you are trying to install an ISAPI Filter, the best way to troubleshoot is to look in the Windows Event Log for error event entries from either W3SVC or W3SVC-WP regarding a failure to load the HTTP Filter DLL. The "data" of the error is the most important piece of information used to diagnose the failure to load/run an ISAPI Filter.
You can get more information at
http://blogs.msdn.com/david.wang/archive/2005/06/21/HOWTO_Diagnose_and_Fix_Common_ISAPI_Filter_Installation_Failures.aspx

Similar Messages

Could not load file or assembly 'file:///C:\Program Files\SAP.......

Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
This is the error that always comes out when i run my program. I've already checked My SAP folder in my C drive. However, there is no win32_x86 directory inside the folder of SAP BusinessObjects Enterprise XI 4.0 in my SAP business objects enterprise folder. What is it that I need to do now.
I am hoping for your answer since i badly need the crystal reports for my thesis. Thank You.

Hi thanks for your reply. I've already searched. And then i found this answer.
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
By pasting that to the config file. Problem is, i don't know where is the config file and which file they are talking about. Can you please tell me where i could find the config file? Please. Thank you very much.

I have camera raw installed in my program files but its not an option when i open up photoshop

I have camera raw installed in my program files but its not an option when i open up photoshop it is not an option in filters where can I find it?

What exact version of Photoshop? What exact version of the OS?
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Logging to SAP 'file:///C:\Program Files\SAP\FrontEnd\SAPgui\saplgpad.exe'.

Refer to post
F4 help for a field in SCREEN 100
Team,
I am using FM CALL FUNCTION 'SRM_TOOLS_LOG_SENDMAIL'
I am APPENDING hyperlink 'file:///C:\Program Files\SAP\FrontEnd\SAPgui\saplgpad.exe' to email body using the above FM. In the email the hyperlink is not complete. It appears in two parts and hyperlink ends after Program: I think this is because there is a SPACE between Program and Files
<b>'file:///C:\Program</b> Files\SAP\FrontEnd\SAPgui\saplgpad.exe'
How to send the lhyperink that it will appear as a complete hyperlink in email body.
Thanks

Hello,
Try to enclose the URL in "<" and ">" characters if the URL has any spaces in
it ,so that it doesn't show as a broken link in the mail client.
Thanks&Regards,
Siri.

Firefox is not available in C:\Program Files and in Add/Remove Programs

I am trying to run an Oracle application which is currently installed in one of our user's PCs, but when we try to generate a report it would fail to do so as Mozilla Firefox is installed on the system and I believe it is set as the default browser. I tried to uninstall it as it is not required anymore, but to my shock I didn't find it in Add\Remove Programs list and also not in C:\Program Files. I tried installed Windows Clean-Up utility, but the application doesn't exist there either. I want to remove Mozilla completely, can someone please help?!! By the way, I also deleted the Mozilla files under the Application Data of all user accounts on that machine; still no luck.

I believe that it's a good idea to leave them be JUST in case they installed a dependency that a new application is using.
This isn't exactly likely but it could happen.
When I'm uninstalling applications I use a tool called
Revo Uninstaller which finds files and registry entries that applications might leave behind.
Will your machine explode and Windows stop booting? Probably not.
Are these left-over files destroying your Hard Drive capacity? Again, Probably not.
Basically, I can't think of much of a reason to delete them so I think it's decent to leave them just in case, but again it probably wont do any damage. Running an third-party application like
CCleaner is also good practice and could likely delete some of the unwanted/unneeded files and crud like that.
Also, most application settings are usually present in the C:\Users\UserAccount\Application Data\ and not in the Program Files or Program Data.
Goodluck bud,
Any questions or concerns feel free to let me know.
-Bryan
Microsoft MCSA, VMWare VCAP-DTD, Cisco CCNP, CompTIA A+, Security+, Network+, Apple ACMT, SPR

How to open each CS version file in its proper version program when double-clicked?

Hello everyone,
This one is about the coexistence of Indesign CS4 and CS5.
In my company: I'm working with Indesign CS4, but a colleague is testing CS5 in real day-to-day works, and everyday I come across CS5 files that I need to correct, so I have CS5 installed too. Now, when I boot in the morning, and no Indesign program is open yet, whenever I double-click on an Indesign file, the system will open it with CS5, no matter if the file is CS4 or CS5. I find this quite annoying, of course. I want each version file to get open right away in the proper version of the program. I'd think this is happening to a lot of people, but I've been looking for the issue in the forums and haven't found anything.
Of course I'm using roundabouts like having my colleague write "_CS5" at the end of each file, put CS4 in my startup items (so that once the program is open, the issue works the other way around and any Indesign file opens just in CS4 when double-clicked…).
Also, all the Indesign files appear on the desktop as CS5 files
I would welcome any ideas on the subject, thanks!

Muchas gracias! really useful. I'm gonna try it.

Why vi dll creates ini file on its own?

Hello,
I have built my LabVIEW project as shared library (dll).
My system looks like this: main exe file loads dll, and this dll loads VI dll.
With LabVIEW 2011 it was ok, but when I switched to 2013 my VI dll started to write into main exe ini file.
When dll is loaded those lines appears in main exe ini file:
[LVRT]
RTTarget.ApplicationPath=C:\Users\user\Documents\LabVIEW Data\Remote Development\startup.rtexe
RTTarget.VIPath=C:\Users\user\Documents\LabVIEW Data\Remote Development
Does someone know what causes this and how to turn it off?

I got the same thing when I built an exe. I have a custom INI file, it has the following entries:
[Oscilloscope 2013]
server.app.propertiesEnabled=True
server.tcp.serviceName="My Computer/VI Server"
server.vi.propertiesEnabled=True
WebServer.TcpAccess="c+*"
WebServer.ViAccess="+*"
DebugServerEnabled=False
DebugServerWaitOnLaunch=True
FPFont="Segoe UI" 15
appFont="Segoe UI" 15
dialogFont="Segoe UI" 15
systemFont="Segoe UI" 15
BDFont="Segoe UI" 15
The only dll it calls is lvanlys.dll. After running the EXE the following are appending to the INI file
RTTarget.ApplicationPath=C:\Users\XXX\Documents\LabVIEW Data\Remote Development\startup.rtexe
RTTarget.VIPath=C:\Users\XXX\Documents\LabVIEW Data\Remote Development
Regards,
mcduff

C:\Program Files\Adobe\Adobe Audition CC 2014\dvamarshal.dll

error message on start up

Nobody can know. You have not provided any exact system information or otehr technical details.
Mylenium

I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?

Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing

Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I have a Runtime Error-Program C:\Program Files (x86)\iTunes\iTunes.exe- an application has made an attempt to load the C Runtime Library incorrectly-How do I fix this?

I have a Runtime Error. Program C:\Program Files (x86)\iTunes\itunes.exe. An application has made an attempt to load C Runtime Library incorrectly. I have robooted and even attempted to uninstall iTunes but neither has worked. When I attempt to uninstall I get a message saying that a program is being installed so I must wait. My OS is Windows 7. How do I fix this?

Hello Richard,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hollie**it! I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes twice today. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an

Hollie**it!
I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes Trice Now. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe. R6034 An application has made an

Hello there, Vinnie.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When trying to open itoons I get an error message: Program C\program files (x86) R6034 An application has made an attempt to load the C runtime library incorrectly.

when trying to open itoons I get an error message: Program C\program files (x86) R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more infomation.

Hello Michwilltwo,
It sounds like you are unble to open iTunes after a recent update. I would recommend the troubleshooting steps from the article named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Be sure to follow the instructions as outlined by the links in the article as there is a specific order in which to uninstall iTunes and its associated programs.
Thank you for using Apple Support Communities.
Cheers,
Sterling

TS1424 Runtime Error.Program:\Program Files\iTunes\itTunes helper.exe R6034

Download and update

Hi jv.2014blue,
Welcome to the Support Communities!
The article below may be able to help you with this.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I hope this information helps ....
- Judy

Why is Explorer.exe reading my program files at startup?

Every time I boot my computer, if I open Resource Monitor, I will inevitably find, under the "Disk Activity" section, the process explorer.exe "reading" my program files.
When I say "program files", I mean the executable files for applications stored in the "C:\Program Files (x86)" or the "C:\Program Files" directories.
Other files seem to get "read" a lot too. PNF files for example.
I have indexing turned OFF on all drives, and yet the process SearchIndexer.exe is almost always running too.

Hi,
Firstly, did you installed MSE in your system, this phenomenon can be caused by MSE security scanning disk.
Secondly, this problem can also be caused by 3rd program, it would be better to use AutoRuns to check system startup items if there is any 3rd process or dll file start with system.
AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Roger Lu
TechNet Community Support

Encore 64 bit? -- install in Program Files (x86)?

When I had trouble installing the update from Premiere Pro CS3 to Premiere Pro CS5, Adobe Tech support had me install Encore under C:\Program Files (x86) instead of C:\Program Files. I'm running Windows 7, 64 bit. Can someone confirm Encore is still a 32 bit program?
Thanks.

John T Smith wrote:
Yes, Encore is 32bit... because the disc writing core of the program is licensed from Roxio, and Roxio has not upgraded to 64bit
Er, not Roxio.
It's a Sonic authorcore - and the confusion comes from the fact that Sonic have bought Roxio, and rebadged some of their products (the consumer grade ones) with Roxio badges - and in turn, Sonic are now owned by Rovi (http://www.rovicorp.com/)
Encore was originally a SOnic app called "DVD Producer" that was discontinued a while back now (probably because it was sold to Adobe)
Sonic have no 64 bit authoring at all.
Even Scenarist SD is still 32-bit, and it is unsupported on Windows 7 64-bit versions.
Scenarist BD, however, is fully 64-bit and Scenarist BD will also author SD discs.

HTTP Filter DLL E:\Program Files\SAP\ITS\6.20\programs\wgate.dll failed

Similar Messages

Maybe you are looking for