HTTP Header fields in SOAP adapter - Part 2

Hi All,
With regards to my previous thread HTTP Header fields in SOAP adapter
my header issue is solved and hence I have closed the thread but still I am not able to make the connection successful. The new problem is below
My vendor requirement is to specify the header as "Ent-sender" but when we give the same in XI in communication channel it automatically convets into uppercase "ENT-SENDER". Due to case-sensitive in vendor server the connection is not gettingestablished.
Please help me out how to solve the problem.
Note: Sorry for the new thread as it was created due to new problem and also the previuos thread is already too long.
Regards,
Dhill

Hi Neaves,
Thank you, I jave seen the note and find the below solution will be some what realated to my prblem.
The nosoap mode lets the adapter send the XI payload directly without wrapping it in the SOAP envelope. Although the main use of this mode is to send some plain text content directly to some web server, one can use this mode to send their own SOAP message (e.g., with arbitrary headers) to an external web service (See related questions). In this case, the XI payload must be formatted in the SOAP envelope.
To use the nosoap mode, the channel must be configured to use no SOAP envelope.
If yes, can you please let me know how to use nosoap mode otherise let me the other possibilities. I am already using tcpg2.zip to trace the SOAP adapter in which it was confirmed that XI is changing the header automatically into CAPS whatever case we give,
Regards,
Dhill

Similar Messages

HTTP Header fields in SOAP adapter

Hi All,
I have a scenario IDoc to SOAP adapter. In which my receiver given the details as
URL : https://b2b.ecsc.us.gxs.com/invoke/GXSGateway:receiveCTE
Header Name: Header Value
Ent-sender xxxx
Ent-receiver yyyyy
Ent-APRF zzzzz
Ent-filename (not sure what data need to give)
1. I request you to let me know where I need to give these headername and hader values in soap adapter.
2. my client require file as an attachment. Please let me know how I need to send the payload as an file and where the name need to be given in the header name (Ent-filename).
Currently I used MessageTransformBean to conver my XML to text structure(flatfile structure).
Please let me know if any more details required
Regards,
Dhill

Was out for lunch break..
Juz Rechecking
Transport Protocol : HTTP
Message Protocol: Soap 1.1
Adapter Engine -> Adapter Engine on the Integration Server
Connection Parameters
Target URL - > https://b2b.ecsc.us.gxs.com/invoke/GXSGateway:receiveCTE
Sure about no sever authentication required and they are not using any HTTP proxy for webservice >????
Conversion Parameters
Do Not Use SOAP Envelope -> Unchecked
Keep Headers -> Checked.
Keep Attachments -> Unchecked
Use Encoded Headers -> Unchecked
Use Query String -> not so sure might be Unchecked
Authentication Keys
If authentication is required for the receiver system, you can enter a password and a confirmation for each key value. This means that you do not need to write passwords in the enhanced message header.
If you want to specify or display authentication keys, select View Authorization Keys.
You can enter and confirm passwords for each authentication key value (TAuthKey or TproyxAuthKey).
Try once sending the message with Adapter-Specific Message Attributes
Unchecked. See if there is a hit.I knw itz not req but juz testing.
Yeah adapter stat must be active.
Last thing need to go through the whole scenario.
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

How i use header fields in soap adapter

Hi Experts,
I need use header fields http in soap adapter receiver but i don't know where's the Variable Header
Do you know where i find this?
Somebody know how i put header fields http in soap adapter receiver?
Thanks for all,

It is similar like in this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Find in the online help the values for the SOAP adapter.
You can only add additional fields, you cannot influence the standard field like content-type and content-id.
Regards
Stefan

Soap receiver - owerwrite default http header fields

Hi,
I'm using the soap receiver adapter in nosoap mode.
How can I owerwrite the default settings for the header fields in the http request?
The soap adapter will automatically set content-type = application/xml.
I would like for example set "text/xml".
Thanks,
Bela

Dear Mohan,
I tryed with the keep headers option but it didn't change anything to the HTTP header fields.
In the documentation we have the following : Keep Headers
If you want to include the header of the XI message in the Web service message, set the indicator.
Does it mean that I have to create a HTTP header section in the XI message??? Do you have an example?
Best regards,
Bela

Http Header for a SOAP message using SAAJ.

Hello java community,
I need to set the 'SOAPAction' field in the HTTP Header of a soap message. I am using SAAJ to build the message.
Does anyone know how to do this?
Help is greatly appreciated as always.

You have to put a Handler in front of your WebService to intercept it.

REG : HTTP header fields (Synchronous response)

Hi All,
Can anyone please explain the advantage of using this function in the receiver HTTP adapter( ie
"Set adapter specific message attribute -> HTTP header fields (Synchronous response)")
and how this can be implemented?
Thanks in Adavnce,
Siva

>
sivarama krishna wrote:
> Hi All,
>
> Can anyone please explain the advantage of using this function in the receiver HTTP adapter( ie
> "Set adapter specific message attribute -> HTTP header fields (Synchronous response)")
> and how this can be implemented?
>
>
>
> Thanks in Adavnce,
> Siva
from help:
If you want to save HTTP header fields from the synchronous response in the XI message header, choose HTTP Header Fields (Synchronous Response) and enter the fields in the fields Field 1 to Field 6.
The fields must have the same names as the fields that are also to be sent in the HTTP response.
The technical names of the fields are HeaderFieldOne,...,HeaderFieldSix.
this means that in case you look to access the header of the response message of a sync http you can use this ASMA.
the implementation will be in your response mapping, using dynamic configuration - /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

Hoiw do I get HTTP Header fields?

Hi,
I want to get the http header field If-None-Match. How do I get a hold of the HTTP headers for a request? I do not want to use If-Modified-Since due the the problems with out of synchronized clocks, determining time zones etc.
The content is in a BLOB, and I don't want to deliver it at all if not necessary. OWA_CACHE does not help, it still delivers the large amount of data.
I can set the ETag header, no problem, but how do I get theIf-None-Match header field returned from the browser so I can avoid unnecessary content delivery?
Thanks,
Larry

Is there a mod_plsql forum?
I can't seem to find it, this looked the closest since I am under the impression HTMLDB depends on mod_plsql...
Larry

How to add a user defined HTTP header field?

Hi, everyone!
I want to add a user defined HTTP header field to a HTTP
response header.
I use the following statements in testHeader.jsp
response.addHeader("myheader", "123");
response.sendRedirect("middleHeader.jsp");
in middleHeader.jsp,
out.print(request.getHeader("myheader"));
But the output in middleHeader.jsp is null!
How to add a user defined HTTP header field to a HTTP
response header? Are there some sample codes?
Cheers,
George

the send redirect actually creates a new request (through the client) and thus a new response
thus the headers you set in the response are gone for the next request/response
You can try servletDispatcher.forward

Get a specific Http header field from an http request in a component

Hello,
In a custom component that I've created ( which extends ServiceHandler), I'd like to access a specific http header field from the http requests that this component receives.
I assume this could be accessible through m_binder or m_service, but I didn't find any solution so far.
Any Idea?
Thanks in advance,
Leo

As it may help others, I answer what I figured out.
Every details of the http request is put into the m_binder.
So a specific field can be accessed with m_binder.getEnvironmentValue("My_data")
You can also list all the available data as it is a standard properties set.

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

How to send a signed SOAP message with additional HTTP Header fields

Our Partner's integration requirements are that we send them asynchronous SOAP messages, that are digitally signed, and whose HTTP headers contains 5 or 6 additional header fields, of which 3 or 4 will need to be dynamically set during the message mapping. I believe we can use the HTTP adapter for adding new fields to the HTTP header, but don't believe it supports signing. I believe that the SOAP adapter supports signing, but I'm not clear on how to use it to add fields to the HTTP header. What is the most straight-forward way to achieve both the signing of the message and the addition of the HTTP header values?
Thanks,
Kurt

>>>What is the most straight-forward way to achieve both the signing of the message and the addition of the HTTP header values?
Use Java mapping for both.
1) Signing the message
You can digitally sign the soap message using many standard api like WSS4j? or refer Java XML signature API which comes in Jdk1.6.
Refer these links
WSS4J - http://ws.apache.org/wss4j/axis.html
Java XML signature : http://java.sun.com/developer/technicalArticles/xml/dig_signature_api/
2) >>whose HTTP headers contains 5 or 6 additional header fields, of which 3 or 4 will need to be dynamically set during the message mapping
Use Dynamic configuration API to set the additional header fields during message mapping.

SOAP Sender Adatper - Read custom http header field

Hello,
i try to read a custom http header into the dynamic configuration of a message - but it is not working as expected - in ASMA i configured to get the value of MYHEADER1 into XHEADERNAME1 - when testing with a MYHEADER1 value, the value is not put into XHEADERNAME1.
Is it possible to get custom HTTP Headers in the message?
bf
franz

I have quite the same problem!
I try to make the receiver determination based on the content of XHeaderName1, but none of the Dynamic Configuration parameters is shown in the sxi_monitor.
I've described my scenario in more detail in this thread
http://scn.sap.com/message/13586532#13586532
Does anyone have an idea?

Including Header in Receiver SOAP Adapter

Hi Guys,
I have to develop a Proxy to SOAP interface and the target WSDL should have 4 messages, namely, HEADER, REQUEST, RESPONSE and FAULT. But while we define the Message Interface, we have only 3 slots for REQUEST, RESPONSE and FAULT.
Is there any way we can account for the SOAP Header ?? ( ASMA or DC or Variable Substitution or any other means )
Kindly help me in this regard
Thanks and Regards,
Krishna Sharma H

HI,
U can use XSLT mapping for including the Header with required fields in the target message generated. For this you need to write the proper .xsl file which converts ur source message into target with with required mapping.
ex:
source msg-
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ccmnet_Request_MT xmlns:ns0="urn:ca.com:ccmnet:ticket:create">
 <tic_no>123</tic_no>
 <pers_no>123456</pers_no>
 <emp_name>raman</emp_name>
 <emp_loc>mumbai</emp_loc>
xslt-
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
 <xsl:variable name="cubicle" select="'Web Ticket'" />
 <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pbp="PBPOWebSerice" xmlns:ns0="urn:ca.com:ccmnet:ticket:create" xmlns:ns1="PBPOWebSerice">
 <SOAP:Header>
 <pbp:AuthHeader>
 <pbp:UserName>ccm</pbp:UserName>
 <pbp:Password>1234</pbp:Password>
 </pbp:AuthHeader>
 </SOAP:Header>
 <SOAP:Body>
 <ns1:InsertTicket>
 <ns1:ReqUserName>
 <xsl:value-of select="//emp_name"/>
 </ns1:ReqUserName>
 <ns1:ReqTelephoneNo>
 <xsl:value-of select="//emp_phone"/>
 </ns1:ReqTelephoneNo>
 <ns1:ReqEmailID>
 <xsl:value-of select="//emp_mail"/>
 </ns1:ReqEmailID>..........
target msg -
<?xml version="1.0" encoding="UTF-8"?>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="PBPOWebSerice" xmlns:ns0="urn:ca.com:ccmnet:ticket:create" xmlns:pbp="PBPOWebSerice">
<SOAP:Header>
<pbp:AuthHeader>
<pbp:UserName>ccm</pbp:UserName>
<pbp:Password>1234</pbp:Password>
</pbp:AuthHeader>
</SOAP:Header>
<SOAP:Body>
<ns1:InsertTicket>
<ns1:UserId>123</ns1:UserId>
<ns1:CubicleNo>Web</ns1:CubicleNo>
<ns1:ReqUserName>raman</ns1:ReqUserName>
<ns1:ReqTelephoneNo/>
</ns1:InsertTicket>
</SOAP:Body>
</SOAP:Envelope>
Here i have hard coded the header fields.... but u can map them frm src msg as well....
Regards,
Nandan

Enabling HTTPS level authentication in SOAP adapter (PI 7.1)

Hi,
I am using SOAP to SOAP scenario using HTTPS level authentication in PI 7.11
As per the SAP Note https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=891877
We have enabled HTTPS level authentication in sender communication channel using SOAP adapter (version 7.0).
But We are not able to have the HTTPS level authentication option in sender communication channel using SOAP adapter (version 7.1) while selecting the adapter type.
Please suggest on this

Hello Gabriel,
You are right, that option is still available in PI 7.1
http://help.sap.com/saphelp_nwpi71/helpdata/EN/fc/5ad93f130f9215e10000000a155106/frameset.htm
But disappeared in PI 7.11
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/3555240bea31c3e10000000a42189d/frameset.htm
The closest seems to be under Security Profile S/MIME. And when you use the sender cc in sender agreement, you are given the choice for validation/decryption/decryption and validation/validation and decryption.
Hope this helps,
Mark

Extension of Standard SOAP Header Information in SOAP Adapter

We are currently trying to call an eBay Web Service via SAP XI and we are using the SOAP Adapter in XI to achieve this.
The following Authentication Information is required in the SOAP Header for accessing the eBay Web Service:
- Token
- ApplicationID
- DevelopmentID
- CertificationID.
Unfortunately, the standard SOAP Adapter supports only certain SOAP Header Information (like User Authentication or Certificate Authentication).
Is it possible to extend the SOAP Header Information in the SOAP Adapter (or somewhere else in XI) beyond the standard configurations?
Thanks for your support.
Alexander Bange

Hi Jin,
thanks for your input and sorry for my late reply but I wanted to wait for feedback from SAP who actually confirmed your recommendation.
I had a second thought about this and it came to my mind that I actually don't want to extend the SOAP Header elements but simply fill the mentioned authentication elements with values. This cannot be done in the message mapping as only the SOAP body elements (i.e. the payload) can be mapped.
Do you know if and how I can fill the SOAP header elements with values in XI?
I already tried to include this information as fixed values in the WSDL description and load it into XI. Then I looked into the WSDL description and an error message occured stating that XI could not parse the XML Document (Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(:main:, row:18074, col:54)).
If there is no solution for the latter, I will have to try nosoap solution. Still this would be a little awkward.
Thanks again for your valuable support.
Best Regards.
Alex

HTTP Header fields in SOAP adapter - Part 2

Similar Messages

Maybe you are looking for