HTTP Pseudostreaming on oracle application server 10g

Hi,
I am fetching videos stored in database and show in website using JWPlayer.
The problem is in Apache Web Server I am able to move faward video but in Oracle App Server 10g
I found in documentation on JWPlayer regarding server need to enable HTTP Pseudostreaming
HTTP Pseudostreaming does not work by default on any webserver.
A serverside module is needed to enable it.
Here are the two most widely used (and open source) modules for this:
The H264 streaming module for Apache, Lighttpd, IIS and NginX. It supports MP4 videos.
The FLV streaming module for Lighttpd. It supports FLV videos.
http://www.longtailvideo.com/support/jw-player/jw-player-for-flash-v5/12534/video-delivery-http-pseudo-streaming#Servers
I need information regarding how enable video Pseudostreaming on oracle app server
-Thanks
Zohaib.

No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
cheers

Similar Messages

ORARRP 1.3.4/Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP on IE7

We have to use JInitiator 1.3.1.13 and ORARRP 1.3.4 on a MsWindows Client to connect to the HQ Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server.
We have noticed this will run almost 100% in MSInternet Explorer version 7.0.5730.11 .
Except for the ORARRP remote print utility which seems to have some timing problem i.e. when generating a report in the browser screen a temporary browser screen will open and close immediately again. Using the advanced debug option in orarrp.ini to monitor any errors does not show any problem.
However when clicking quickly in the temporary browser screen the Printer selection screen will pop-up and the local printer can be selected to print-out the report.
PDF-reports to screen work normally with IE7. ORARRP will start Adobe Acrobat reader (version 8.1.0).
Has someone solved this issue with local printing using ORARRP on IE7?
We would like to deploy IE7 asap because of its better features and rendering than IE6.
thanks in advance,
Fred

Move your thread to "Reports" forum, you will probably get a better response:
Reports

How to convert HTTP to HTTPS in Oracle Application Server 10g(10.1.3)

Can you please suggest notes to convert HTTP to HTTPS in Oracle Application Server 10g(10.1.3) as we need this to integrate the custom apps with EBS(12.1.3)?
Appreciate your quick response,
RM

For Oracle EBS R12, the docs provided above should be helpful. If you want to configure the application server with SSL (assuming you have 10gAS installed), please refer to Oracle AS10g documentation -- Secure Sockets Layer (SSL)
Oracle Application Server 10g Release 3 Documentation
http://www.oracle.com/technetwork/middleware/ias/documentation/index.html
Secure Sockets Layer (SSL)
http://download.oracle.com/docs/cd/B25221_04/core.1013/b25209/part4.htm#BEHBDFGD
Thanks,
Hussein

Resolve http 500 internal error - Oracle Application Server 10g 10.1.3

Hi ,
I have installed Oracle Application Server 10g 10.1.3 as an Integrated Web Server (+.. J2EE Server, and Process Management ) on windows 2003 (xeon 4 CPUs , 3gz RAM..).
installation was successfully done and i am able to access to Enterprise manager http://localhost/em
i have deployed my oc4j instances and everything is starting fine when i enter opmnctl startall
when i try to login on the application am receiving HTTP 500 - Internal server error from Internet Explorer.
in apache error.log , i have the error "mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://ascontrol (no island or jgroup)."
opmn.log contains :
09/06/30 23:21:02 [pm-requests] Http b
AppWeb.ebj-agp-fib-01~OC4J~ebjcorporate~default_group~1664292877:4344
Status: Stopped
Operation: request (success)
ErrFile: D:\oracle\product\10.1.3\OracleAS_1\opmn\logs\OC4J~ebjcorporate~default_group~1
i tried many solutions , my current http.conf contains :
-MaxKeepAliveRequests 100
-KeepAliveTimeout 15
-MaxRequestsPerChild 0
-ThreadsPerChild 20
I will be gratefull if someone can help me to solve it.
Thanks.
nolan

all oc4j containers are up .
Processes in Instance: AppWeb.ebj-agp-fib-01
-------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | memused | uptime | ports
-------------------------------------------------------------------------------------------+------
OC4J | ebjutility | 5400 | Alive | 611913545 | 93648 | 0:04:39 | jms:12603,ajp:12504,rmi:12403
OC4J | ebjadmin | 460 | Alive | 611913544 | 103300 | 0:04:39 | jms:12604,ajp:12503,rmi:12404
OC4J | ebjcorporate | 4456 | Alive | 611913543 | 105776 | 0:04:39 | jms:12601,ajp:12502,rmi:12402
OC4J | home | 5792 | Alive | 611913542 | 111188 | 0:04:39 | jms:12602,ajp:12501,rmi:12401
HTTP_Server | HTTP_Server | 4684 | Alive | 611913541 | 42312 | 0:04:37 | https1:443,http2:7200,http1:80
ASG | ASG | N/A | Down | N/A | N/A | N/A | N/A
in " D:\oracle\product\10.1.3\OracleAS_1\opmn\logs\OC4J~ebjcorporate~default_group~1" log file , i have warning, but this should no be a pb...
09/07/01 09:55:26 Start process
WARNING: Code-source D:\FlexcubeAt\build\extclasses\jars\ojdbc14.jar (from <library> in /D:/oracle/product/10.1.3/OracleAS_1/j2ee/ebjcorporate/applications/ebjcorporate/) has the same filename but is not identical to /D:/oracle/product/10.1.3/OracleAS_1/jdbc/lib/ojdbc14dms.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\oracle\product\10.1.3\OracleAS_1\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader ebjcorporate.root:0.0.0.

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Oracle Application Server 10g (Application Running)

Dear All Sir/Madam
It is my humble request that please tell me how to run Application on Application Server 10g.
I developed my Application in Oracle developer suit 10g (build internet appliacation), and I am using *10g database*.
Now please tell me the complete procedure who to configure oracle application server 10g on linux.

Hello Ghulam,
Notice that you can deploy different kind of applications within the Application Server framework, e.g. JEE applications, PL/SQL applications, Forms Applications etc. Based on what you initially mentioned, it seems that your have developed a Forms application. The above document reference refers to Application Server 10.1.3, which was a JEE / SOA release. You are probably better off with the [url http://download.oracle.com/docs/cd/B14099_18/web.1012/b14032/toc.htm]Forms Deployment Guide.
One note : Application Server 10.1.2.x is soon to be desupported. Consider to move to version [url http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html]11.1.2 !
Thanks,
EJ

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL

HI,
EBS-12.1.3
DB 11gR1
I am Facing following Error: while installing Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL
pwd
pwd
/shared/bishiphome/Disk1/install/linux64
[oravis@erptest linux64]$./runInstaller -ignoreSysPreReqs
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-20_08-52-57AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2011-07-20_08-52-57AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Should i install JRE in the Server
Thanks
Vishwa
Edited by: Vi**** on Jul 19, 2011 10:18 PM
Edited by: Vishwa on Jul 25, 2011 3:30 AM

HI,
Change the above to the following and see if you get any error:
$ /shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr/shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-26_08-46-15AM. Please wait ...[oravis@erptest ~]$ Exception in thread "main" java.lang.ClassFormatError: oracle.as.install.engine.modules.install.exception.InvalidInventoryPointerException (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:488)

Oracle Application Server 10g R3 with patch set 10.1.3.5.0

Hi All,
Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
Please help me.
Regards,

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

Oracle Application server 10g on vista

Hi Freinds,
AMD 64 bit processor running os vista 34 bit.
I want to install oracle application server 10g on windows Vista. when i run the set up its giving me an error but oracle certification table shows its vertified on vista.
erro message:
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
looking forward to your advising.
Thanks in advance :)

What version of Oracle Application Server 10g are you installing?
If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
Thanks
Shail

Oracle Application Server 10g on a virtual environment

Hi,
Can anyone provide us the Step by Step approch to install Oracle Application Server 10g on a virtual environment on solaris cluster?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

Oracle Application server 10g on RHEL 4

Hi Experts,
I have a oracle application server 10.1.3 which is installed on a IBM blade server which has Red Hat Enterprise Linux 4 (RHEL4) as operating system.
The server has a RAM of 8GB and has 4 processors (Intel XEON 3.8 GHz).
I have deployed an application on this server, the application has been developed in Oracle ADF (ver 10g). The jdeveloper version used for development was 10.1.3.2.0
I want to ask how many concurrent user session this server can handle concurrently. And how can i perform a stree or load testing on this server.
Are there testing tools available for stress testing (pls provide any name).
Using this configuration can this server can it handle around 500 sessions of users.
Thanks in advance .

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Oracle Application Server 10g R2 32bit installation on RHEL 5.4 64 bit

Hi !
Is it possible to install 32 bit Oracle Application Server 10g R2 on 64 bit RHEL 5.4?
Is there some spacial care I need to take to do this?
Regards,
GC

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Deploying Jave portlet on Oracle Application Server 10g

I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal.
But when i deploy my application (just a test thing), from the deployment tab I get:
---- Deployment started. ---- 22-Mar-2005 14:11:27
Target platform is Oracle Application Server 10g (hotseatConnection).
Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c253297271317c3f930003c405ea91ff598582f0be0
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 1 minute, 45 seconds
---- Deployment finished. ---- 22-Mar-2005 14:13:12
My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
Many thanks
P/S
I have tried:
http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

Hi FormsEleven,
When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
Or how the url to access these forms will be?
As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
- Hosting Directory (formsweb.cfg entry)
- Sub Directory1
      - Form1
      - Form2
- Sub Directory2
      - Form1
      - Form4
- Sub Directory3
      - Form5
      - Form6

HTTP Pseudostreaming on oracle application server 10g

Similar Messages

Maybe you are looking for