HTTP receiver Adapter-- 403-Forbidden-Service Error

Hi ,
Scenario: This is a B2B scenario in which the Sender Party communicates with external partner using HTTPS calls.
I have enabled SSL on ABAP, installed the certificate in STRUST and created an RFC destination of Type G to connect to external system.
Question.
When i do a TEST connection of the RFC destination, the test is successful xith HTTP:1.0 200 OK.
But when i execute my scenario, the message fails in sxmb_moni. with the following error
<SAP:Category>XIAdapter</SAP:Category>
 <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3>Service Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 403 reason Forbidden explanation Service Error</SAP:Stack>
Don't know how to proceed about. kindly advice me.
Regards,
Siva Maranani

Hi,
My problem is solved.
I was getting the following error b'cos the wrong XML document being posted to external serer. When we changed the payload and tested the scenario, its woking fine.
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3>Service Error</SAP:P3>
Regards,
Siva Maranani

Similar Messages

Code 110 Reason Error in HTTP Receiver adapter

Hello
I am having proxy to HTTP Receiver scenario in which i am calling the target application URL through HTTP Receiver Adapter. This interface is async interface and hence i am not expecting any response from the target system.
When i execute my interface the target system receives data from XI but in SXMB_MONI it sets the status of the message as "Automatic Restart" with the error description as "HTTP client. Code 110 reason" in HTML Code area <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
This is causing multiple messages stuck in the queue and presently i am manually clearing all the messages.
i checked the quality of service of the incoming message which is correctly setted as Exactly Once.
Is there any configuration missing?
Thanks in advance.
Regards
Rajeev

Hi Rajeev,
1.)Check in SMICM if your HTTP service is running or not.
2.)If its running fine then you can check whether your SSL certificate is configured properly or not.
Also follow the below mentioned links :
HTTP 110
HTTP Receiver Adapter -> HTTP client code 110 reason error when sending
*Pls reward with points if helpful*
Regards,
Shibani

How to trace HTTP receiver adapter error

Hi All,
My scenario is to send PO details to vendor site (HTTPS URL). MY SSL configuration is complete and I have used the SSL certificates in RFC destination of type 'G'. When I test RFC destination connection, it gives me the correct response as '200'.
This RFC destination is used in HTTP receiver adapter of XI to connect to site and post PO xml document. It is passing successfully through Integration Server, as I get success flag in 'SXMB_MONI'. But, it is not reaching our vendor's site.
Can someone help me, with what's going wrong, or how can I trace the error.
Thanks & Regards,
Amit

Hi Sadhna,
It's a B2B scenario, where my sender is configured correctly and the receiver as well.
In sxmb_moni, I am getting successfull status. But, it is not reaching receiver.
Thanks & Regards,
Amit

ICM_HTTP_TIMEOUT error in HTTP Receiver adapter

Hi
I am doing HTTP Receiver adapter and File Sender adapter for my scenario.
I am getting the following error in SXMB_MONI.
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 402 reason ICM_HTTP_TIMEOUT</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error
Help needed,

Hi Ganesh,
Check this weblog...
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Check this thread with similar issue...
ICM_HTTP_TIMEOUT
Regards,
Sridhar

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

PI 7.11 - Sync HTTP receiver adapter with response XML file

Hi
We have a File to HTTP scenario in which we need a sync HTTP interface. We send a file to the HTTP address and receive a XML acknowledge. As I read in this forum: sync HTTP interfaces are not possible with the "standard" HTTP adapter. So I found an entry which recommended to use the SOAP adapter instead.
I configured it:
- Do Not Use SOAP envelope
- modules: RequestResponseBeans, CallSapAdapter, ResponseOneWayBean
If i use this scenario, i get following error in the RWB - Message Display Tool:
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getMessageId() of an object loaded from local variable 'message1'.
I testet this scenario using CURL and it worked properly. Should this kind of scenario work with the SOAP adapter or do I need to buy/develop an own adapter? Is in NW7.3 possible to configure sync HTTP scenarios?
Thanks in advance
Michael

Hi
actually i use a simple HTTP receiver CC with the setting "XI Payload in HTTP Body" to send a XML datafile to a webpage (java servlet). This part works fine by now. But, this servlet would also send back a status information to the state of the received datafile, which I like to catch.
e.g. HTTP response from the servlet (catched using CURL):
HTTP/1.0 403 Forbidden
Server: Apache-Coyote/1.1
X-Powered-By: Servlet 2.4; JBoss-4.3.0.GA (build: SVNTag=JBPAPP_4_3_0_GA date=200801031548)/Tomcat-5.5
Set-Cookie: JSESSIONID=OALHMomjR9TVgIATi8SrPQ**.ajp13_ls_1; Path=/ls
Content-Type: text/xml
Date: Tue, 06 Mar 2012 16:19:56 GMT
X-Cache: MISS from proxy.xxxx.com
Via: 1.0 proxy.xxxx.com:xxxx (http_scan/4.0.2.6.19)
Proxy-Connection: close
<?xml version="1.0" encoding="UTF-8" standalone="yes"?><!DOCTYPE transportordersfromls [ <!ELEMENT transportordersfromls (userid, clntid, msgid, (transportorderfromls+ | error))> <!ATTLIST transportordersfromls vers CDATA #REQUIRED> <!ELEMENT userid (#PCDATA)> <!ELEMENT clntid (#PCDATA)> <!ELEMENT msgid (#PCDATA)> <!ELEMENT transportorderfromls (refid, status)> <!ELEMENT refid (#PCDATA)> <!ELEMENT status (ok | error+)> <!ELEMENT ok EMPTY> <!ELEMENT error EMPTY> <!ATTLIST error reason (XMLError | SystemNotAvailable | ApplicationError | OTHER) #REQUIRED message CDATA #REQUIRED> ]>
<transportordersfromls vers="1.0">
 <userid/>
 <clntid>XXXXX</clntid>
 <msgid>0</msgid>
 <error reason="OTHER" message="Access denied"/>
</transportordersfromls>
Michael

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

HTTP Receiver Adapter : Dynamic URL

Hi,
I have a scenario where I wish to build a dynamic URL for the HTTP Receiver Adapter. The URL will contain a customer number which is present in the mapping.
The help seems to suggest that this is possible :
If you want to use an HTTP destination or URL set by the mapping, set the URL or HTTP Destination indicator. (The indicator displayed depends on the Addressing Type you selected above). If you set the indicator, the URL or HTTP destination set dynamically is called by HTTP.
If the message header does not contain the URL or the HTTP destination, and you have set the Fail If Adapter-Specific Message Attributes Missing indicator, the XI message is set to status System Error. If you do not set the indicator, the URL or HTTP destination defined statically in the communication channel is used.
However, it is not very clear where the URL needs to be set dynamically.
Does anyone know how to achieve this ?
Cheers
Colin.

hello to all,
We have a unique issue with one of our customers that is limited to 100 character URL. The current url is http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck&interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
Is there a way to have a URL like
http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck
and then somewhere in the process add... &interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
So the data comes to an F5 through the DMZ to the SAP webdispatcher then to the SAP XI system.
Any ideas if this is possible or how you could start with a shorter URL?
Thanks,
Dede

System Landscape Directory: HTTP response code: 403 (Forbidden)

Hi,
After upgrading PI 7.1 (with local SLD) Stack06 -> Stack09 we have the following error in the runtime workbench. It seems that the connection
between PI and SLD is not working:
1) error in RWB -
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
2) another error:
8 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1 - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1
3) in the sld:
INFO com.sap.sld.api.builder.app.DefineHostedSystem: Communication exception in SLD ping (HTTP 403 = FORBIDDEN): http://hfasapxi1:50000/sld/cimom, namespace sld/active.
sldcheck is working and the users are not locked or not valid. All seems to be ok but I still get these errors.
Any idea ?
Dimitry Haritonov

Hi Venu,
thanks for the answer but it seems to be something else. After searching for that problem I also ran the configuration wizard->PI self registration. This activity registers all the component of the PI, unfortunately it only registered the "integration server" part without the Adapter engine, domain, RWB and etc.
Also, when I trigger the registration of the adapter engine I get the following error in the default trace:
The AdatperEngine has not been registered with the SLD due to: com.sap.aii.af.lib.sld.SLDException: Could not register AdapterFramework to SLD. Reason: Self-registration of instance af.xid.hfasapxi1 of class SAP_XIAdapterFramework failed
the reason is unknown ... any idea ?
Dimitry Haritonov

HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?

Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman

Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna

Manipulate the URL in HTTP receiver adapter possible?

hello together,
i have an HTTP receiver adapter. To the parameters which i can tick in XI as default (sender party, sender service, ....) i want to add some parameters too.
who can i do that? i have read the weblog from william li. i tried to change the parameter link the comments at the end of the blog (see kurt rasmussen) but nothing happend..... the parameters are not available....
can somebody help me?
thanks a lot
alex

hello michal,
yes, i did. i took the information from http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm and tried to put some special information to URL. nothing to see.
is it mandatory to use a mapping to fill the URL parameter fields, isn't it??
i am using a port sniffer to see the URL and the fields (parameters) in it.
thanks a lot.
alex

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
 HttpVersion: HTTP/1.1
 Authorization: Digest username=myusername,
 realm=[email protected],
 nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
 uri=/dir/index.html,
 qop=auth,
 nc=00000001,
 cnonce=0a4f113b,
 response=6629fae49393a05397450978507c4ef1,
 opaque=5ccc069c403ebaf9f0171e9517f40e41
 Contentlength: 12345
 Contenttype: text/html
HTTP Body
 TRANSPORT_PROTOCOL=OXTA
 TRANSPORT_PROTOCOL_VERSION=1.0
 REQUEST_TYPE=SEND
 MESSAGE_ID=A1234567890ZZ0987654321
 MESSAGE_TYPE=XML
 MESSAGE_STANDARD=OAG
 TRANSACTION_TYPE=PO
 TRANSACTION_SUBTYPE=PROCESS
 DOCUMENT_NUMBER=12345
 PARTYID=9999
 PARTY_SITE_ID=8888
 PROTOCOL_TYPE=HTTPSOXTA
 PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
 transportAgentServer
 USERNAME=myusername
 PASSWORD=myloginpassword
 ATTRIBUTE1=
 ATTRIBUTE2=
 ATTRIBUTE3=
 ATTRIBUTE4=
 ATTRIBUTE5=
 PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

HTTP Receiver Adapter payload as single line plain text with out any tags.

Hi PI experts,
I have a strange problem in http receiver adapter.
Sender RFC (SAP) Receiver: HTTP.
Receiver system expects the output from XI in the below format in a single line plain text with out any tags in the payload. and the content type should be application/x-www-form-urlencoded
Group=Test&Sentinel=Web%20Server&Facility=5345&Order Number=XT-XWHM-Y-NA&Serial Number=123456&@LABEL_QUANTITY=5&@LABEL_NAME=111114_Q
Is there any way to achieve this using http receiver adapter. Business is not ready to accept the output from XI not even in a single element instead they only need it as a JUST a plain text.
Appreciate early response on this.
Thanks in Advance,
Jitender

Dear Ola,
Could you elaborate how you achieved in catching the response data from the receiver in case of HTTP receiver adapter?
The target service is not a WebService but some python script that must to receive some paramters via POST request.
HOW can I post this parameters?
Here you entered the fields of the message type of the request in the header parameters of the receiver adapter? Thats fine.
But what about the message type and vice versa of the response from the receiver?
Regards
Rebecca

HTTP receiver Adapter-- 403-Forbidden-Service Error

Similar Messages

Maybe you are looking for