HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?
Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman
Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna
Similar Messages
-
hi experts,
how to remove <?xml version="1.0" encoding="UTF-8"?> from receiver payload.
my source srtucture is ,
<?xml version="1.0" encoding="UTF-8"?>
<ns0:entity-data xmlns:ns0="http://www.xxx.com">
<Customer>
<CustNo>xxx</CustNo>
</Customer>
</ns0:entity-data>
in receiver payload i dont wont " <?xml version="1.0" encoding="UTF-8"?> "
i want receiver payload
<ns0:entity-data xmlns:ns0="http://www.xxx.com">
<Customer>
<CustNo>xxx</CustNo>
</Customer>
</ns0:entity-data>
can any one provide me the solution for this.
regards,
ganeshhi vijayakumar,
thanx for ur response.... -
Hi,
When I am Using append mode in file adapter,for each file that i send a seperate <?xml version="1.0" encoding="UTF-8"?> tag is getting generated in the target.
eg:
File 1
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
File 2
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e2</name>
</DEPT>
Result
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e2</name>
</DEPT>
Here <?xml version="1.0" encoding="UTF-8"?> tag is repeated.
How to remove the same from 2nd time.so that my output file is displayed as follows
<?xml version="1.0" encoding="UTF-8"?>
<DEPT>
<name>e1</name>
</DEPT>
<DEPT>
<name>e2</name>
</DEPT>
Thanks in advance
sreeHi
Did you check the occurence of DEPT Node as 0..unbounded???
Did You check the output from Test tab of Message Mapping???
Did You use the Node function in mapping???
if not
You better use either Java mapping
with regards
Gabriel -
Hi all,
I am doing file to file scenario.When I use APPEND in the File adapter it is also adding <?xml version="1.0" encoding="UTF-8" ?>
I need to send a file for every 10 minutes consolidate all files and send at the end of the day.
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
The next time when i send the file with different< ID>31155</ID>
it should append ignoring <?xml version="1.0" encoding="UTF-8" ?>
The consolidated file must look like this...
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
< ID>31155</ID>
Thanks ,
SrinivasHey
as pointed out by everyone else,there is no straight way for this,one thing u can do is that create two separate scenarios.
in first scenario use content conversion on receiver side and keep on appending the text for 10 mins (guess this is ur pooling interval),now since ur using FCC u wont get <?xml version="1.0" encoding="UTF-8" ?>,you will get a flat file on receiver side.
after 10 mins u can have one more scenario which picks up this flat file and this time use FCC on sender side so that it will convert this flat file to XML,in this way you will get <?xml version="1.0" encoding="UTF-8" ?> only once.
hope this solves ur problem.
just make sure that you specify correct polling intervals for both the scenarios.
thanx
ahmad -
Hi,
I am using following SQL query to generate output from XML
select
XMLTYPE
('<?xml version="1.0" encoding="UTF-8"?>'||
xmlelement("bank",
XMLATTRIBUTES('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
'http://www.XXXX.xsd' AS "xsi:nonamespaceSchemaLocation" ),
xmlelement("Transaction",
xmlforest(
intraday "MessageCode",
actnum "ToAccountNo",
v00090 "ToBranchCode",
v00230 "CurrencyCode",
amt "Amount",
trandt "TransactionDate",
valuedt "ValueDate"),
xmlelement("CustomerRefNo",
xmlforest(
utr_number "ReferenceNo1",
ref1 "ReferenceNo2",
ref2 "Custtype",
r1 "SequenceNo"
x1
from
It is working fine but '<?xml version="1.0" encoding="UTF-8"?>' it is not coming as header of output My output is coming like
<bank xmlns:xsi="http://www.w3.org/2001/XMLSchema" xsi:nonamespaceSchemaLocation="http://www.XXXX.xsd">
<Transaction>
<MessageCode>0100</MessageCode>
<ToAccountNo>012340123456</ToAccountNo>
<ToBranchCode>01234</ToBranchCode>
<CurrencyCode>INR</CurrencyCode>
<Amount>11.00</Amount>
<TransactionDate>2007-01-15T17:54:31</TransactionDate>
<ValueDate>2007-01-15</ValueDate>
Kindly help.
PJPTry using the XMLRoot function.
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb13gen.htm#sthref1566 -
Adding " ?xml version="1.0" encoding="UTF-8"? " in generated xmls
Hi,
I am using xmlbeans framework to generate xmls , i am able to generate xml using document object but header "<?xml version="1.0" encoding="UTF-8"?>" is not coming in that xml file , how to include this in output xml files.Hi,
I don't know the XMLBeans Framework, but this header is called XML declaration.
In general there are options to configure this (i. e. setOption("omit-xml-declaration", false);).
Anyway, I don't know the exact syntax in this framework but have a look at this, maybe it helps somehow.
http://xmlbeans.apache.org/docs/2.0.0/reference/org/apache/xmlbeans/XmlOptions.html#setSaveNoXmlDecl()
Best Wishes
esprimo -
Can anyone spot where I'm going wrong?
I'm creating a DOMDocument like this:
Document document = null;
DocumentBuilder doc_builder = null;
try
doc_builder = factory.newDocumentBuilder();
catch(ParserConfigurationException e){/* deal with exception*/}
document = doc_builder.newDocument();Adding various stuff to it, then saving it like this
Source source = new DOMSource(document);
Result result = new StreamResult(idx);
Transformer xformer = TransformerFactory.newInstance().newTransformer();
xformer.setOutputProperty(OutputKeys.METHOD, "xml");
xformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes"); //??????
xformer.setOutputProperty(OutputKeys.ENCODING, "ISO-8859-1");
xformer.setOutputProperty(OutputKeys.INDENT, "yes");
xformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
xformer.transform(source, result);All the usual stuff.
But how do I get it to write:
<?xml version=\"1.0\" encoding=\"UTF-8\"?>
at the top of the page?
One further thing...
If I have nothing to write in my xml file, it just spits out a blank file.
Instead, I want it to write:
<?xml version="1.0" encoding="UTF-8"?>
<upIdx/>
a simple:
document.createElement("upIdx");doesn't appear to do anything if the block "upIdx" is subsequently empty.
Many thanksduugggh....
(well it is friday evening.. ... long week.. all that kind of stuff)
how stupid of me....
to answer my own question, it was here:
xformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no"); //??????
xformer.setOutputProperty(OutputKeys.VERSION, "1.0");
xformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8"); -
Remove ?xml version="1.0" encoding="UTF-8"? from XML doc
I have generated an XML file using javax XML transformer. In the XML file thats generated I have the version and the encoding line
<?xml version="1.0" encoding="UTF-8"?>
which is automatically generated in my XML file. Is there any way that I can avoid that from the XML file thats generated.
Here is the transformer that I have used.
public static void printToXML(String fileName){
try{
File file = new File(fileName);
Transformer tr = TransformerFactory.newInstance().newTransformer();
tr.setOutputProperty(OutputKeys.INDENT, "yes");
tr.setOutputProperty(OutputKeys.METHOD,"xml");
tr.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "3");
tr.transform( new DOMSource(dom),new StreamResult(new FileWriter(file)));
}catch(TransformerConfigurationException tcex){
logger.info("TransformerConfigurationException at printToXML method in CSVtoXML.java");
logger.error("TransformerConfigurationException", tcex);
}catch(TransformerException tex){
logger.info("TransformerException at printToXML method in CSVtoXML.java");
logger.error("TransformerException", tex);
}catch(IOException ioex){
logger.info("IOException at printToXML method in CSVtoXML.java");
logger.error("IOException", ioex);
}Well, it is a pretty important line. Why do you need it removed? Anything that really processes XML knows how to read it and determine what encoding was used. That is vital, if you look at the number of questions posted here about foreign language text in XML. If you really have a text processsor that knows how to open a file called something.xml, and knows how to process or ignore most of the pointy bracket things, but not this one, it is time to fix it.
Dave Patterson -
?xml version="1.0" encoding="UTF-8" ? is missing
HI,
My scenario:
Http Post ->PI---->Siebel
When they post from source to PI. In source file <?xml version="1.0" encoding="UTF-8" ?> is missing.
It is failing in Request Message Mapping step in pipeline.
Can we append this <?xml version="1.0" encoding="UTF-8" ?> when it is coming to PI.
Kindly tell me how to acheive this issue.
Take care.
PreethaHi aamir,
I did exactly what u told but i am getting following error in pipeline step - Request Message mapping
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>mapping/Mapping.xsl</SAP:P1>
<SAP:P2>http://abc.com/LMIChat</SAP:P2>
<SAP:P3>eed947a0-59c5-11de-b473-f9eb401c9ba9</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Trace Info:
Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Transformer configuration exception occurred when loading XSLT mapping/Mapping.xsl (http://abc.com/LMIChat, eed947a0-59c5-11de-b473-f9eb401c9ba9, -1) at com.sap.aii.ibrun.server.mapping.MappingPool.checkOut(MappingPool.java:114) at
Aamir what i need to do now.... Will there be any error in code.... -
?xml version="1.0" encoding="UTF-8"? coming twice in payload
Hello SOA Gurus,
I am working on a BPEL process, which produces message in JMS Queue and another process consumes the same.
Issue I am facing is
*<?xml version="1.0" encoding="UTF-8"?>*
*<?xml version = '1.0' encoding = 'UTF-8'?>*
<Exception xmlns="http://xmlns.xxxx.com/EBS/xsd/ExceptionDetails">
<InterfaceID>001</InterfaceID>
<InterfaceName>Test Interface</InterfaceName>
<KeyID>000001</KeyID>
<KeyName>Emp ID</KeyName>
<FaultName>DOB Missing</FaultName>
</Exception>
XML Encoding is getting populated twice, Can anyone help me if fixing this.
Thanks,
Sunilplease let us know,how you are trying to copy the variables.
-
Hi
i have a doubt if any one knows please let me know.
in atg rest service(POST Request) i am sending request as xml and also i am expecting response as xml
i have configured to get response as xml,but i want to delete xml prolog<?xml version="1.0" encoding="UTF-8"?>) from my response can we have property to remove xml prolog by using atg server.
thanks in advance
balaHello Soumya,
Good to know it worked, I have got some doubts of using XPATH have U ever worked on that, let me know.
Bye,
Sam Mathew -
PRC: Create Accounting Output shows "xml version="1.0" encoding="UTF-8"
I m getting Error in the Output of Create Accounting like <?xml version="1.0" encoding="UTF-8" ?>
Any one have some Clue ...Hi,
It is a bug, and an enhancement request (6354170: ORACLE ALERT LAUNCHING CONCURRENT PROGRAMS WITHOUT XML PUBLISHER TEMPLATES) was created for this issue. Check Metalink and see if the patch is released or not, or you may log a SR to confirm the status of this bug with Oracle support.
Bug# 6354170 - ORACLE ALERT LAUNCHING CONCURRENT PROGRAMS WITHOUT XML PUBLISHER TEMPLATES
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=6354170
Regards,
Hussein -
Hello all,
The spools of a SmartForm that I developed are missing the line:
<?xml version="1.0" encoding="utf-8" ?><sf>
The spool starts with:
<smartxsf xmlns="urn:sap-com:SmartForms:2000:xsf"><header><general><version>1.14.2< (so on...)
The Functional Counsultant wants the spool to look like:
<?xml version="1.0" encoding="utf-8" ?><sf><smartxsf xmlns="urn:sap-com:SmartForms:2000:xsf"><header><general><version>1.14.2< (so on...)
Only such a spool can be printed successfully. If the line is missing, no print out can be taken.
Could you please tell me what settings need to be done in order to see the missing line in the spools?
Thanks and regards,
Ameya
Edited by: Ameya_Tulpule on Mar 9, 2011 8:58 AMhii,
http://help.sap.com/saphelp_nw70/helpdata/en/a5/28d3b6d26211d4b646006094192fe3/content.htm
Go to this link click under Activating XSF Output
statically
dynamically
Overriding the Output Format
Desired Output Format
Settings for Overriding
Standard output
(OTF)
XSFCMODE = 'X'.
XSF = SPACE.
XDFCMODE = 'X'.
XDF = SPACE.
XSF
XSFCMODE = 'X'.
XSF = 'X'.
XDFCMODE = SPACE.
XSF+HTML
XSFCMODE = 'X'.
XSF = 'X'.
XSFFORMAT = 'X'.
XDFCMODE = SPACE.
XDF
XDFCMODE = 'X'.
XDF = 'X'.
XSFCMODE = SPACE.
Matching Parameters for Static Attributes
Output Format
Input Field in Form
Parameter of Structure SSFCOMPOP
(possible settings)
XSF
Output mode
(for XDFOUTMODE='S')
XSFOUTMODE ('S'|'A')
Output device
XSFOUTDEV
XSF+HTML
Output mode
XSFOUTMODE ('A')
BSP page/URL
XSFACTION
XDF
Output mode
XDFOUTMODE ('S'|'A')
Output mode
(for XDFOUTMODE='S')
XDFOUTDEV
regards,
Sridhar.V -
Hi, I have a message which must contain XML inside XML, this internal one must start off with the <?xml version="1.0" encoding="utf-8"?> string.
Is there a nice trick for inserting this before an element? (not at the beginning of the mapping, a specific place further inside the XML).
All of the other elements are mapped as part of the message type.Did you check Message Mapping : Play around with target structure .
You can do this easily with UDF.
public String setPrevalue(String var1,Container container) {
StructureNode node = ((StructureNode) container.getParameter("STRUCTURE_NODE"));
node.setPreValue("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
return""; -
How to remove ?xml version="1.0" encoding="UTF-8"? .
HI Experts,
i am doing one scenario file to file . in soruce payload i have <?xml version="1.0" encoding="UTF-8"?> . i want to remove <?xml version="1.0" encoding="UTF-8"?> at target side. is it possible .
regards,
alekhya.Hello,
i want to remove <?xml version="1.0" encoding="UTF-8"?> at target side. is it possible .
You can use XSLT and add
<xsl:output method="text" version="1.0" encoding="UTF-8" omit-xml-declaration="yes"/>
in your output declaration
Hope this helps,
Mark
Maybe you are looking for
-
Creating a new apple id for my wife
I currently have one Apple ID and run iTunes on a Windows 7 PC. This is synced to 2 iPhones, 2 iPads and 2 iPods as well as 2 Apple TV's. All the Apps purchased, updated and shared between all the devices are controlled using iTunes depending on whos
-
Pleasel let me know if there is a way to copy and paste choices for a Combo Box from an Excel spreadsheet or text file. I have over 250 values I'd like to add and don't trust my typing! Thanks for the help! Ken K. - 2191
-
Transfer from iPod to iTunes for data recovery.
I have an iPod classic (5th gen). I lost all of my iTunes data on my Windows PC. But I do have the songs and videos on my ipod, so I want to know how to copy all the data from my ipod into a new copy of iTunes on Win7 (preferably using msdos/window
-
Invalid persistence handling in wls 11g
Hi Current release of weblogic server 11g (10.31) still can't correcly handle persistence.xml's First, in wls ear/ejb's modules do not see persistence xml's added to ear root folder META-INF (like in Jboss or Webshphere) Second, ear's with persistenc
-
Hi, I have the impression that the K900 does not take so good pictures compared with samples that I see on the internet. I quote two pictures to tell me your opinion. The version of the camera is the 3.1.1 and the android 4.2.1. The first 1st is 9MP