HTTP receiver adapter: dynamic configuration

I was told that if I have a URL and some parameters, I can use a sync HTTP receiver adapter to call a site.
I know this can be done using some kind of dynamic configuration, but I am not familiar with this adapter.
The most important question here is that I need to know if this can be done throw PI, so my question is:
Is there a parameter limit in the HTTP adapter? If so, what is the quantity of parameters that I can give to the adapter?

for the ASMA parameters you can use for the HTTP receiver adapter check
Configuring the Receiver Plain HTTP Adapter - http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm

Similar Messages

HTTP Receiver Adapter : Dynamic URL

Hi,
I have a scenario where I wish to build a dynamic URL for the HTTP Receiver Adapter. The URL will contain a customer number which is present in the mapping.
The help seems to suggest that this is possible :
If you want to use an HTTP destination or URL set by the mapping, set the URL or HTTP Destination indicator. (The indicator displayed depends on the Addressing Type you selected above). If you set the indicator, the URL or HTTP destination set dynamically is called by HTTP.
If the message header does not contain the URL or the HTTP destination, and you have set the Fail If Adapter-Specific Message Attributes Missing indicator, the XI message is set to status System Error. If you do not set the indicator, the URL or HTTP destination defined statically in the communication channel is used.
However, it is not very clear where the URL needs to be set dynamically.
Does anyone know how to achieve this ?
Cheers
Colin.

hello to all,
We have a unique issue with one of our customers that is limited to 100 character URL. The current url is http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck&interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
Is there a way to have a URL like
http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck
and then somewhere in the process add... &interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
So the data comes to an F5 through the DMZ to the SAP webdispatcher then to the SAP XI system.
Any ideas if this is possible or how you could start with a shorter URL?
Thanks,
Dede

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
 HttpVersion: HTTP/1.1
 Authorization: Digest username=myusername,
 realm=[email protected],
 nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
 uri=/dir/index.html,
 qop=auth,
 nc=00000001,
 cnonce=0a4f113b,
 response=6629fae49393a05397450978507c4ef1,
 opaque=5ccc069c403ebaf9f0171e9517f40e41
 Contentlength: 12345
 Contenttype: text/html
HTTP Body
 TRANSPORT_PROTOCOL=OXTA
 TRANSPORT_PROTOCOL_VERSION=1.0
 REQUEST_TYPE=SEND
 MESSAGE_ID=A1234567890ZZ0987654321
 MESSAGE_TYPE=XML
 MESSAGE_STANDARD=OAG
 TRANSACTION_TYPE=PO
 TRANSACTION_SUBTYPE=PROCESS
 DOCUMENT_NUMBER=12345
 PARTYID=9999
 PARTY_SITE_ID=8888
 PROTOCOL_TYPE=HTTPSOXTA
 PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
 transportAgentServer
 USERNAME=myusername
 PASSWORD=myloginpassword
 ATTRIBUTE1=
 ATTRIBUTE2=
 ATTRIBUTE3=
 ATTRIBUTE4=
 ATTRIBUTE5=
 PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

Adapter specific properties (http receiver adapter)

Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
Marc

Hello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", XXXXX);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc

Testing HTTP Receiver adapter.

Hi Everyone,
Would anyone Please provide the sample details required for testing the HTTP Receiver adapter to check its fuctionality and the required output.
Any Help would be appreciated.
Regards,
Varun

Hi Varun,
Check this for HTTP Adapter ..
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
HTTP to RFC - A Starter Kit
regards
Kishore

Regarding Http Receiver Adapter Details.

Hi Everyone.
When do we use http Receiver Adapter?
I want to configure File to HTTP Scenario.
For Receiver Adapter, What should i Specify Addressing Type .If I select the URL Address
What I need to give values for Target Host, Service Number, Path and Similarlly If I select Addressing Type as HTTP Destination, What I need to give value for HTTP Destination.
Regards,
Varun

Hi,
check this blog
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
CSV File Lookup With Http Request and Response in XI
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Regards
vasu

HTTP Sender and HTTP Receiver adapter. Pls advice urgent

Hi All,
There is one Third Party that wants to send XML data and receive XML data with XI.
Please let me know can I use HTTP for that.
How to use HTTP Sender part?
How to use HTTP Receiver Adapter?
Pls send blogs/doc for that
Thanks and Regards

hi.,
Check this thread for the code for a HTTP Client,
/message/266750#266750 [original link is broken]
Also, check these blogs. They use HTTP adapters for their configuration,
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Weblog :
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
note:reward points if solution found helpfull.....
regards
chandrakanth.k

How to trace HTTP receiver adapter error

Hi All,
My scenario is to send PO details to vendor site (HTTPS URL). MY SSL configuration is complete and I have used the SSL certificates in RFC destination of type 'G'. When I test RFC destination connection, it gives me the correct response as '200'.
This RFC destination is used in HTTP receiver adapter of XI to connect to site and post PO xml document. It is passing successfully through Integration Server, as I get success flag in 'SXMB_MONI'. But, it is not reaching our vendor's site.
Can someone help me, with what's going wrong, or how can I trace the error.
Thanks & Regards,
Amit

Hi Sadhna,
It's a B2B scenario, where my sender is configured correctly and the receiver as well.
In sxmb_moni, I am getting successfull status. But, it is not reaching receiver.
Thanks & Regards,
Amit

HTTP Receiver adapter with post

Hello,
I have following scenario.
XI (http receiver adapater) -
> 3rd party web based application.
The 3rd party application expects XI payload to be part of URL with POST Method.
When HTTP receiver adapter sends request to 3rd party application, the URL looks like as follows.
http://myserver:6789/myapplication/name1=value1&name2=value2&.....&name27=value27
I looked at HTTP receiver adpater document on SDN. I see some attributes such as headerfiled1, headerfiled2..... headerfield6 and urlfield1....urlfield6. I have about over 25 fields to be passed with URL.
Now I have following questions.
1. How to make XI payload as name value pairs and part of URL.?
2. I think the default for http adapater is GET, How to configure http adaper to use POST?
I appreciate your help.
Thank you,
Balaji

> 1. How to make XI payload as name value pairs and part of URL.?
You should create the whole URL in a user defined function in mapping.
> 2. I think the default for http adapater is GET, How to configure http adaper to use POST?
HTTP adapter (and SOAP adapter) use HTTP POST. GET is not supported.
Regards
Stefan

Code 110 Reason Error in HTTP Receiver adapter

Hello
I am having proxy to HTTP Receiver scenario in which i am calling the target application URL through HTTP Receiver Adapter. This interface is async interface and hence i am not expecting any response from the target system.
When i execute my interface the target system receives data from XI but in SXMB_MONI it sets the status of the message as "Automatic Restart" with the error description as "HTTP client. Code 110 reason" in HTML Code area <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
This is causing multiple messages stuck in the queue and presently i am manually clearing all the messages.
i checked the quality of service of the incoming message which is correctly setted as Exactly Once.
Is there any configuration missing?
Thanks in advance.
Regards
Rajeev

Hi Rajeev,
1.)Check in SMICM if your HTTP service is running or not.
2.)If its running fine then you can check whether your SSL certificate is configured properly or not.
Also follow the below mentioned links :
HTTP 110
HTTP Receiver Adapter -> HTTP client code 110 reason error when sending
*Pls reward with points if helpful*
Regards,
Shibani

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Parameter in HTTP receiver adapter

Hey
My requirements are:
I am sending an XML to an external system. Documentation says: "XML should be in a parameter in your request called 'xmlInput'".
How do I actually put my XML in this parameter? Does this have anything to do with the URL Parameters in comm channel configuration?
I have configured a client proxy, http receiver adapter and a communication channel in sm59 and they work OK, but it seems as I don't send the XML in this parameter.
Appreciate your help!
regards Ole

Hey!
Thanks for your answers.
Nana, are you sure of this, that java proxy is the only way I can put the XML in a parameter? I only need to confirm this because there is no place in their documentation that this is stated explicitly, I have only been told this via their technical person...:)
I agree that this is a limitation of the receiving system, and I know that this system is not up to date as I can tell from what they are saying and their documentation.
regards Ole

Paramter setting in URL in the case of HTTP receiver adapter

I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat

I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat

HTTP receiver adapter: dynamic configuration

Similar Messages

Maybe you are looking for