HTTP Receiver URL

Hi,
I am doing a HTTP to HTTP scenario. my requirement is to send a value randomly from HTTP sender CC to the Receiver HTTP CC URL. let me more precise, i want to send a parameter to the target URL
for example the target URL http://localhost:8001/echo.jsp?echo=x, i want to send a value x=10 from the Sender HTTP CC.
Can some help me how can i achieve it.
Thanks
Shaik

Azias,
Select ASMA.Check URL Parameters indicator and give the URL values.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
Read this it might be helpful.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Best regards,
raj.

Similar Messages

Customize the HTTP RECEIVER URL

Hi all,
With AS2, all inbound messages are received at the following URL /b2b/httpReceiver.
Is it possible to customize this URL ?
Thanks in advance.
Sebastien

Hi Sebastien,
All the inbound http msgs can be received via following two URLs.
/b2b/httpReceiver
/b2b/transportServlet
If you have a specific use case, please raise an SR or talk to our PM KrishnaPrem ([email protected])

In HTTP receiver, how to make a dynamic query string in URL

Hi,
I have a scenario where after a map we get an XML output as shown below
<FUNLOC>000010038</FUNLOC>
<SECONDARY_KEY>0000010038</SECONDARY_KEY>
<SOURCE>SAP customer</SOURCE>
<NAME>NAME NAME12 NAME13</NAME>.
Now what i need that my HTTP receiver URL should add these tags as
FUNLOC=000010038&SECONDARY_KEY=0000010038&SOURCE=SAP customer&NAME=NAME NAME12 NAME13.
Can any one help me out in step by step process to archive this.
This will be a great help from you.
Thanks in advance,
Smita

Hi Smita,
Check these threads You can find the solution there.
https://forums.sdn.sap.com/click.jspa?searchID=5694804&messageID=3189288
https://forums.sdn.sap.com/click.jspa?searchID=5694804&messageID=3717577
Regards,
Sreenivas

Manipulate the URL in HTTP receiver adapter possible?

hello together,
i have an HTTP receiver adapter. To the parameters which i can tick in XI as default (sender party, sender service, ....) i want to add some parameters too.
who can i do that? i have read the weblog from william li. i tried to change the parameter link the comments at the end of the blog (see kurt rasmussen) but nothing happend..... the parameters are not available....
can somebody help me?
thanks a lot
alex

hello michal,
yes, i did. i took the information from http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm and tried to put some special information to URL. nothing to see.
is it mandatory to use a mapping to fill the URL parameter fields, isn't it??
i am using a port sniffer to see the URL and the fields (parameters) in it.
thanks a lot.
alex

How to HTTP-Post different XML messages to one receiving URL on XI side?

Hi
I have a problem with a HTTP => XI => IDoc scenario.
A client want to send 4 different XML documents to only 1 receiving URL on the XI side. How can I handle this in XI???
To send XML data via HTTP to XI you have to specify the namespace, interface and service in the URL. But I only can specify 1 namespace, interface and namespace in the URL...
But how can I define a generic message interface for all 4 messages.
The solution with 4 receiving URL's is easy, but not workable for the client
Thx
manuku

You can do following:
Create an interface with an artificial root node like this:
root
- structure message 1
- structure message 2
- structure message 3
A simple XSLT/Java mapping adds that root node to every message.
Create different mappings based on the structure if the different mappings and do routing based on the same.
Another option: Upgrade to PI 7.1. Here you can simply create a service interface with different operations and routing/mapping based on the operations.
Regards
Stefan

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

HTTP Receiver Adapter : Dynamic URL

Hi,
I have a scenario where I wish to build a dynamic URL for the HTTP Receiver Adapter. The URL will contain a customer number which is present in the mapping.
The help seems to suggest that this is possible :
<i>If you want to use an HTTP destination or URL set by the mapping, set the URL or HTTP Destination indicator. (The indicator displayed depends on the Addressing Type you selected above). If you set the indicator, the URL or HTTP destination set dynamically is called by HTTP.
If the message header does not contain the URL or the HTTP destination, and you have set the Fail If Adapter-Specific Message Attributes Missing indicator, the XI message is set to status System Error. If you do not set the indicator, the URL or HTTP destination defined statically in the communication channel is used.</i>
However, it is not very clear where the URL needs to be set dynamically.
Does anyone know how to achieve this ?
Cheers
Colin.

hello to all,
We have a unique issue with one of our customers that is limited to 100 character URL. The current url is http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck&interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
Is there a way to have a URL like
http://mycompany.com/sap/xi/adapter_plain?namespace=urn%3Agoodyear%2Ecom%3AAIT%3AInventoryCheck
and then somewhere in the process add... &interface=AITInventoryCheck_Abs&service=HTTP_AIT_InvChk&QOS=BE&sap-client=010&sap-language=EN
So the data comes to an F5 through the DMZ to the SAP webdispatcher then to the SAP XI system.
Any ideas if this is possible or how you could start with a shorter URL?
Thanks,
Dede

Paramter setting in URL in the case of HTTP receiver adapter

I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat

I have the following requirment: Can you anyone please help me how to define DATATYPE and configure in HTTP adapter:
The web page is developed in JSP page its body contains parameter(for example:<textarea name="xml" cols="70" rows="150" wrap="off">) to pass to the URL.
In this suitation,1) how can define my datatype in XI repository. ,Root element should be start with "xml" tag? 2). what are configuration parameters in HTTP receiver adapter.
3). Using HTTP post application.
Your response is highly appreciated.
Thanks
Venkat

HTTPS communication using HTTP receiver adapter URL address as Address Type

Hi All,
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
Note : Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

Hi,
Check this,
Configurations in Integration Directory
The plain HTTP adapter gives the receiver system the following specifications:
 Specifications for addressing using a URL address:
Target host, service number, and path prefix including query string:
http://<hostname:port>/<path>?<query-string>
You can identify the target host (HTTP port) of a SAP Web Application Server using
the
ICM monitor
Host and port of the HTTP proxy (optional if there is a firewall between the plain
HTTP adapter and the receiver system)
Authentication data for the receiver system.
See also: transaction Display and Maintain RFC Destinations (SM59).
 Specifications for addressing using an HTTP destination:
HTTP destination
 Parameters from the communication channel for technical routing
Content type (the entry text/XML is expected as default)
Specifies the format that the message contents (the payload) should have.
Optional header fields for the receiver-specific protocol
Attributes for the query string
1. Sender party
2. Sender service
3. Receiver Interface
4. Message ID
5. Quality of service
6. Queue ID
All attributes are selected except for the queue ID. If you do not want a value to be
transferred to the receiver, deselect it. The queue ID is only required if the quality of
service is EOIO.
Specifications for payload manipulation
XML code (default UFT-8)
Specifies the character set.
URL escaping
Presents the XML in a URL-enabled format. Special characters that could be
interpreted as control characters are replaced with escape characters (masked).
Prolog
Enhances the payload for particular servers (optional, see below).
Epilog
Enhances the payload for particular servers (optional, see below).
Enhancing the Payload
Regards
Seshagiri

HTTP Receiver with URL Parameters

Hi, I need to pass the following parameters when I do an HTTP post
1. Data
2. DataType
3. Protocol
4. Security
5. DataFormat
Here the Data will have the payload to be sent to HTTP receiver. Can anybody tell me, how I can pass the payload using URL Parameter.

in the HTTP reciever CC
from the help...
- If you want to use URL parameters, select Apply URL Parameters and enter the parameters in the fields Parameter 1 to Parameter 6.
The parameters are included in the HTTP request under the names specified here.
The technical names of the fields are URLParamOne, u2026, URLParamSix
Also check this blog
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
Edited by: Anand on Oct 15, 2008 8:40 PM

HTTP Receiver: parameter in URL

Hi,
in my HTTP receiver adapter I'd like to use the following:
www.xyz.com/script.asp?xmlcontent=payload
So
my target host = www.xyz.com
my Path = script.asp
How do I put the xmlcontent=payload in ?
I read some things about prolog and epilog.
Should I also change the content type ?
thanks !

Hi Alexander,
I guess there is no need to use epilog and prolog. You can configure the URL parameter at receiver communication channel.
For more details refer to /people/william.li/blog/2007/09/07/posting-and-testing-using-xipi-http-adapter and /people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this .
Regards,
Sunil Chandra

Not able to see 'Adapter specific' indicator in http receiver comm. channel

I am not seeing the Adapter Specific Message attributes indicator in http receiver adapter where one can set a dynamic URL. Anybody any idea? Thanks.

I have a fixed URL except that it should be formed with https instead of http. I guess the default http is used as there is no where in the communication channel to select https. I am able to invoke the https url through browser but through http receiver adapter, I get error 'http client code 110 reason'. I see in other blogs that this is due to https not enabled in the J2EE engine. But for outbound why should that matter? As long as the target URL is set to accept https, I should be able to sent the message as long as the URL gets formulated starting with https. If it was SOAP adapter, the entire URL can be entered so no issue, but with http adapter is there a way to specify entire URL including the https:// ? Thanks.

HTTP Receiver interface returns with error code 110

Hi All,
We are posting the document from XI to a external server as HTTPS request.
We are able to sucessfully post the request to external server using HTTP destination as address type but not able to post sucessfully with URL as address type.
Here goes the details -
We are able to post the HTTPS request successfully on the external server using the HTTP destination as address type in HTTP receiver adapter setup.
When we setup address type as HTTP destination , we need to provide the following details -
IN SM59 , Connection type G
Target Host : host name ( with out "https://" as prefix)
Service No : 443
Path prefix : query string
SSL : Active
Certificate : Select the certifacte from the client certificate list.
We can post the request to external server using URL as address type in HTTP receiver adapter setup.
When we setup address type as URL , we need to provide the following details -
Address type : URL Address
Target Host : host name ( with out "https://" as prefix)
Service Number : 443 ( HTTPS port setup on XI)
Path : query string.
When we post the same request as we did with HTTP destination as Address type , we are getting a HTTP response code as failure HTTP response code 110
Please find the details about the return code -
If a cache returns a stale response, either because of a max-stale directive on a request, or because the cache is configured to override the expiration time of a response, the cache MUST attach a Warning header to the stale response, using Warning 110 (Response is stale).
110 Response is stale
MUST be included whenever the returned response is stale.
Please find the error message from SXMB_MONI
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please let me know if some one has faced this issue.
Regards,
Reddy
Edited by: Nanda kishore Reddy Narapu Reddy on Mar 11, 2008 12:35 PM

Hi All,
Is some one can confirm that - We can use HTTPS with Address type as URL address in HTTP receiver adapter setup.
I can confirm that using HTTP destination as Address type in HTTP receiver adapter setup we can attain HTTPS communication with external server.
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can guide me what are the steps need to be done.
Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

HTTP RECEIVER QUERY

hello everyone,
I have to develop a synchronous scenario, SOAP Sender to HTTP Receiver.
Soap sender will be passing suppose 2 fields Name and Employeeid and the Http receiver will be replying back the
response with entire employee details (name, id, address, dateofbirth, etc).
Http receiver has to be accessed via a URL like
https://abc.com/test/servlet/ServletInterface?command=getdetails&emp_name=<Name>&emp_id=<Employeeid>
This is an https request, henc an RFC destination needs to be configured in XI and SSL has to be activated but how will i add the parameters Name and Employeeid to the URL mentioned in the RFC destination.
i went through many blogs on SDN, but i could not figure out how to append the URL mentioned in the Http Destination. Is it possible to do dynamic configuration with SSL enabled.
i tried passing URL https://abc.com/test/servlet/ServletInterface?command=getdetails in the HttpDestination and also configured a mapping for dynamic configuration but with no success.
please let me know if i am on the right track. if not please suggest.
thanks in advance.
Edited by: praveen kalwa on Feb 22, 2008 1:33 PM

Hi,
XI supports only PUT method of http request. While adding parameters to the addr string is considered as a GET method.
Refer following blog in this regard.
/people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
-Kavita

HTTP Receiver URL

Similar Messages

Maybe you are looking for