HTTP_RESP_STATUS_CODE_NOT_OK error casue RFC

Hi all
should i maintain a RFC connection between SAP PI and R/3 with connection type H,
but i do have connection RFC for R/3 to SAP PI with connection type H and my Proxy to file is working fine ,
Thanking you
'Sridhar

hope this error is cause of this HTTP_RESP_STATUS_CODE_NOT_OK,and will it work if the connection are fine with RFC ? will be fine if you give the parametrs to be given and checked and tested
i am worried abt the Path Prefix, and Service No where to get it
Thnaking you
Sridhar
Edited by: sridhar loganathan on Nov 14, 2008 4:03 AM
Edited by: sridhar loganathan on Nov 14, 2008 4:03 AM

Similar Messages

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol

We are encountering the following error while navigating the dashboards/ reports through OBIEE: "Error 500--Internal Server Error From RFC 2068 Hyperion Transfer Protocol"
While navigating from one dashboard page to another this error is encountered or we get kicked out of the session and need to log back in.
Any one experienced the same before?

Thanks Srini.
They issue we are facing is not post-installation specific. The environment functions fine but when we navigate dashboard pages, then this error pops up. It is intermittent and applicable to certain dashboards and reports. Not sure if you have ever encountered the dashboard/ report design causing this?
Ganesh

Error in RFC: Name of password is incorrect

Hi All,
I am using GRC AC 10.1 with SP06 and came across with one issue and so need your help to rectify it.
I have created one cross system groups for all deveopement clients (SAP_DEV_CG) and put all the D-clients for all the landscapes.
While running the risk violations reports on user level, i get to see the violations along with an error: "Risk analysis finished with error. Check log for details". SLG1 reports indicates that there is some issue with the RFC: Name or password is incorrect.
The error is quite clear and self explanatory that there is some issue with the RFC; but my concern is that, as I have put multiple development clients to this group so how would i know for sure that SLG1 indicates the RFC (password/name) issue to exactly what system. It will not be feasible to go and see all the systems one-by-one. I checked the logs in detail, navigated through all the technical information but not really able to see the particular system name where the real issue is there.
Looking forward to your quick and positive response.
Thanks,
Ameet

Hi Colleen,
Thanks for your response and sorry for this delay in responding with your suggestions.
SM21 results are as below, But I don't see any hints on the connector which is causing the error with RFC:
Exeuting the jobs for each connectors or checking for each connectors one-by-one to investigate with the RFC issue is one option as I had already mentioend in my original post, but that would take quality time to come to one conclusion.
Do we have any way out here to get this sorted out for the connector causing the error.
Regards,
Ameet

Error-The RFC destination EDSCLNT900 is not available in ICWC

Hi All,
I'm working on CRM Utilities 2007. In the ICWC, I'm getting the error 'The RFC destination EDSCLNT900 is not available'. Kindly help me in resolving this error.
Regards,
Archana.
Edited by: archu_sap on Jul 15, 2009 10:30 AM
Edited by: archu_sap on Jul 15, 2009 10:33 AM

Hi,
You have to maintaine RFC Destination EDSCLNT900 in the CRM system.
generally we have to maintain RFC (t-code SM59) in the sytem where Function Module is present.
Suppose you are having FM in ECC system and you want to call in CRMsystem, then you have to maintain RFC destination (EDSCLNT900) in ECC system.
Thanks & Regards.
ShreeMohan

Error creating RFC function /BODS/ABAP_RUN : RFC_ABAP_EXCEPTION-(Exception_Key: FU_NOT_FOUND, SY-MSGTY: E, SY-MSGID: FL,

Hi Expert,
I try to execute job on development system but he showed error "Error creating RFC function </BODS/ABAP_RUN>: <RFC_ABAP_EXCEPTION-(Exception_Key: FU_NOT_FOUND, SY-MSGTY: E, SY-MSGID: FL, SY-MSGNO: 046, SY-MSGV1: /BODS/ABAP_RUN)>. Notify Customer Support.
In ECC I use ABAP execute option as Execute Preloaded. How to solve this problem? Thanks for your advise.

Dear,
have you checked in EXX wether the function group /BODS/BODS is available?
Some notes here:
You will have to have to import the new ABAP Program group "BODS/BOS" which you can find in the local install folder...
Here are some details:
Installing Functions on the SAP Server
SAP BusinessObjects Data Services provides functions that support the use of the ABAP, BAPI, and
IDoc interfaces on SAP servers. You will need some or all of these functions in the normal operation
of the software in an SAP environment. These functions perform such operations as dynamically loading
and executing ABAP programs from Data Services, efficiently running preloaded ABAP programs,
allowing for seamless metadata browsing and importing from SAP servers, and reporting the status of
running jobs. Some of these functions read data from SAP NetWeaver BW sources.
You must upload the provided functions to your SAP server in a production environment. It is
recommended that you always upload the functions to your SAP server whether you are in a
development, test, or production environment. The functions provide seamless integration between
Data Services and SAP servers.
The default installation places two function module files for SAP servers in the ...\Data
Services\Admin\R3_Functions\transport directory. You then upload these files to SAP servers
using the SAP Correction and Transport System (CTS) or manually. Using CTS allows for version
control as the functions evolve across releases.
The installation provides two versions of transport files (depending on the server version you are using)
to install the functions on the SAP server. To obtain the names of the latest transport files for installing
or upgrading these SAP server functions, see the readme.txt file
And I've found those files and text files in the local install folder....in:
Program Files\SAP BusinessObjects\Data Services\admin\R3_Functions
(that's where I've installed it).
There you'll find some descriptive txt as how to proceed.
After installing, it might happen that the executing user is missing some authorizations.
Here my authorizations team helped me by tracing the user and then adding the necessary rights.
Sure hope this will help you.
Notes to check:
see SAP Note 1919255
Note 1916294

Error code: HTTP_RESP_STATUS_CODE_NOT_OK error text: HTTP response contain

Hi Gurus
I got this error in Alert monitoring please any one can guide me how can i resove this...
Error code: HTTP_RESP_STATUS_CODE_NOT_OK error text: HTTP response contains status code 500 with the descri
Thanks

Hi Mohana,
the major reason would be an internal access with pwd aunthentication
Error: 500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Thanx
Sampath

System error during RFC call BAPI_FIXACCOUNT_GETLIST

Hi Gurus,
Below are the error and steps when i perform Payroll Posting to Accounting. To enable communication between distributed systems, the appropriate method have been specified in ALE Customizing for the objects of the following tables. (Basis -> Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Maintain Distribution Model and Distribute Views.)
However, error still exists as shown below:-
1.     Run TCode PC00_M99_CIPE
2.     Encountered Error as shown below:
Communication error with system QAS, function FI_ACCT_DET_HR
Message no. 3G404
Diagnosis
The function module "FI_ACCT_DET_HR" has been called remotely in system "QAS". As a result, an error occurred when creating the connection or during communication.
Procedure
Check that the ALE distribution model is correctly maintained.
Account determination could not be performed
Message no. 3G361
Diagnosis
The account could not be determined for one of the following reasons:
No destination could be found in the ALE distribution model for the AcctngEmplyeeExpnses.Check method.
A system or communication error occurred when executing the function FI_ACCT_DET_HR in the target system.
System error during RFC call BAPI_FIXACCOUNT_GETLIST: / CPIC-CALL: 'ThSAPCMINIT' Unknown serv ice
Message no. KI012
3.      Check in SM21: NiConnect Unsuccessful, Return Code: -0003
                    Communication error, CPIC return code 020, SAP return code 665
Please advice. Thanks in advance.
Best Regards,
Fung

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

Error in RFC

Hi,
I am getting an error in RFC. I am trying to implement the File to RFC scenario using BPM by Arpit Seth. /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit . Now I am getting some error in RFC. It is giving an error in BAPI_COMPANY_GETDETAIL.Exception in sxmb_moni. How do I find out what error it is and why is it happening.

Hi,
Check the payload.
Next go to sxmb_moni_bpe.
Select the integration process.
Select the technical details button applicaiton tool bar / shift + F9.
You can find out at which step the error is thrown.
I had one peculiar problem once. While passing the company id you need to also specify leading zeros in the source document.
Hope itz of some help.
<b>Cheers,
*RAJ*</b>

Error in editing object: Error in RFC to Solution Manger System

Hi All,
Our System release is ERP 6.0 EhP4 and our DB is Oracle.
When we try to create or edit any object (eg: Function module, package, function group, tables) in our system and save it in a local workbench request, we are getting an error which states: Error in editing object: Error in RFC SM_<SID>CLNT<Client>_BACK to Solution Manger System.
Though we have deleted the RFC SM_<SID>CLNT<Client>_BACK, we still get the same error when we try to edit an object and save it in a workbench request. But when we save all these in a local object instead of a package we do not get any error.
Can any one please suggest some solution for this?? As we are held up in some critical activity.
Regards,
Yamini.

Hi,
Not sure - but maybe a cross system lock seems to exist. Perhaps you can check this:
http://help.sap.com/saphelp_em70/helpdata/en/43/7227481a856fcae10000000a1553f6/content.htm
Or else create the Back RFC to SolMan and check how it proceeds.
Regards,
Srikishan

Error in RFC destination SWU3

Hi Team,
Recently we have performed System Copy from Production to QAS system.
After system copy we checked that workflow is not working properly in system and RFC destination
WORKFLOW_LOCAL_xxx does not exist in system So we went to SWU3 and tried to create RFC destination from there but
it is giving error :
Error Creating RFC Destination
Message no. SWF_CST006
I have SAP_ALL,SAP_NEW and Super group in system.
Can you please suggest what could be root cause of this error or from where I can get more details of this error.
Shivam

> Can you please suggest what could be root cause of this error or from where I can get more details of this error.
check
- the system log (SM21)
- the workprocess trace
Markus

Error in RFC SM_DM1CLNT800_BACK to Solution Manager System Message no. STMWFLOW025

Hi,
I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
Thanks in advance
Ashish

Hi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish

Type Conflict Error with RFC FM

Hi Guys,
I am getting "Type conflict when calling a function module" in XI.
Here is the full error.
<rfc:ZFIBAPI_ACC_DOCUMENT_POST.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>Type conflict when calling a function module.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>CALL_FUNCTION_CONFLICT_TYPE</V1></Attributes></rfc:ZFIBAPI_ACC_DOCUMENT_POST.Exception>
Is it something with the XI side or SAP side.
Thanks
Senthil

is there any solution to the problem you mentioned????
"The object can only be displayed
Message no. MO705
Diagnosis
You tried to change an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is a sorted table
The object contains sorted tables
System Response
The system can only display the object"
Please reply back as we need it very urgently... thanks
Mani

Error during RFC connection

Hi
I am trying to edit test partner script from eca script, but i am getting one error 'ecatt error ECATT_STORE_BLOB(2)
saving of blob denied for security reasons. you may not be in the edit mode of ecatt ' when i click on ok button it is telling error during RFC connection and whatever changes i made in test partner is not saved.
How to solve this problem. Please help me.

Is it working fine in the standalone mode?
Refer to the below checklist for trouble shooting:
1) Maintenance of DSN settings to the databases - TP_EDIT and TP_EXEC
2) Maintenance of R/3 connection parameters
3) Refer eCATT Security guide
4) Refer OSS note - 519858
Please note that for an integration Scenario, the connection and user information is required so that appropriate rights are established automatically.
Hope this helps!

Obiee start page error : Error 500 internal server error---- From RFC 2068

Hi,
Atlast after 100s of attempts(it took around 2 months) I successfully installed Obiee 11g on my laptop (simple install type)
(lot of errors and lot of issues).
Now the problem is whenever I start the BI services "http://systemname:7001/analytics/saw.dll?bieehome"
it won't open some time especially when system is not connected to internet... and whenever I connect to internet it works properly..
( I installed Microsoft Loopback Adapter for static IP)....
The error I am getting when I am not connect to internet is " Error 500 internal server error---- From RFC 2068 Hypertext Transfer Protocol-- HTTP/1.1:
10/5/500 Internal Server Error
The server encounterd an unexpected condition whcih prevented it from fulfilling the request"
Does Obiee 11g definitely need internet connection(for standalone systems) to work properly..?
Thanks and Regards,
Sri..

it works some time ......

HTTP_RESP_STATUS_CODE_NOT_OK error casue RFC

Similar Messages

Maybe you are looking for