HTTP response code 401 when trying to import webservice

Hi,
I've created a Webservice how descripted in http://help.sap.com/saphelp_erp2005/helpdata/de/24/186440bdd39a0ae10000000a155106/content.htm. Now I try to import it in NWDS. I followed the step by step guide "81 Using a Web Service as External Service (Service)".
My WDSL file of my webservice is available over http://server:8000/sap/bc/srt/rfc/sap/Z_MPO_XRFC_CAFTESTBO_GETBYNAME?wsdl
When I try to use this url in step 4 (page 13) I get the following message:
Cannot Load WebService WSDL from URI: http://server:8000/sap/bc/srt/rfc/sap/Z_MPO_XRFC_CAFTESTBO_GETBYNAME?wsdl reason: IO Exception occurred while parsing file:Server returned HTTP response code: 401 for URL:
http://server:8000/sap/bc/srt/rfc/sap/Z_MPO_XRFC_CAFTESTBO_GETBYNAME?wsdl
The HTTP errorcode means "no authorisation". But why does the NWDS don't ask for user and password?
Any ideas?
Best regards from cologne
Martin

Hello Martin,
step 4 of page 13 is only for loading the WSDL and generating the external service model. The user and password that you give here is not used for exectuting the web service. The runtime configuration for your web service is done on page 23 of the tutorial. Here is where you set the user and password for the execution of the web service. You can choose either basic authentication or SSO with login ticket which will not send any text login information.
Regards,
Austin.

Similar Messages

Received HTTP response code 401 : Unauthorized

Hi Experts!
I know there are lots of posts regarding Received HTTP response code 401 : Unauthorized, and I read a lot of them.
Unfortunately I got not the solution to my problem.
I have following scenario: async; oneway; xml via DataPower (SOAP) to SAP PI to Service Consumer
When sending a message it is led over the DataPower to the PI, but it is not processed through.
It enters the MP and it is successfully put into the queue. You can see the details below.
15.02.2012 15:12:34.611     Information     MP: entering1
15.02.2012 15:12:34.614     Information     MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
15.02.2012 15:12:34.616     Information     SOAP: request message entering the adapter with user PI**
15.02.2012 15:12:34.620     Information     SOAP: request message leaving the adapter (send)
15.02.2012 15:12:34.620     Information     The application tries to send an XI message asynchronously using connection SOAP_http://sap.com/xi/XI/System.
15.02.2012 15:12:34.624     Information     Trying to put the message into the send queue.
15.02.2012 15:12:34.676     Information     SOAP: call completed
15.02.2012 15:12:34.676     Information     SOAP: completed the processing
15.02.2012 15:12:34.676     Information     Message successfully put into the queue.
15.02.2012 15:12:34.676     Information     The application sent the message asynchronously using connection SOAP_http://sap.com/xi/XI/System. Returning to application.
15.02.2012 15:12:34.678     Information     MP: leaving
15.02.2012 15:12:34.682     Information     The message was successfully retrieved from the send queue.
15.02.2012 15:12:34.700     Information     The message status was set to DLNG.
15.02.2012 15:12:34.922     Error     Transmitting the message to endpoint https://<sid>.XXX:port/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 401 : Unauthorized.
15.02.2012 15:12:34.940     Information     The message status was set to WAIT.
15.02.2012 15:12:34.941     Information     The asynchronous message was successfully scheduled to be delivered at Wed Feb 15 15:17:34 CET 2012.
I can't say, why I get the 401-response.
From PI Message Monitoring: Monitor Messages I get following informations:
Message-ID     MSG-ID
Richtung     OUTBOUND
Message-Headers     content-length=14391
http=POST
content-type=multipart/related; boundary=SAP_MSG-ID_END; type="text/xml"; start="<soap-MSG-ID[at]sap.com>"
Message-Typ     Send
Verbindungsname     SOAP_http://sap.com/xi/XI/System
Credential     SAPPasswordCredential(PIAFUSER):password=********:sapclient=009:saplang=en:sapsysid=<SID>
Fehlerkategorie     XI_J2EE_ADAPTER_XI_HANDLER
Fehlercode     SEND_CONSUMER_ERROR
Statusdetails     Messaging: allgemeiner Fehler
Quality-of-Service     EO
Empfängerkomponente
Referenz-ID
Senderkomponente     SENDER_COMP
Sequenz-ID
Serialisierungskontext
Status     systemError
Einplanungszeit     2012-02-15 13:49:38.579
Start Time     Wed Feb 15 13:34:37 CET 2012
Transport     HTTPS
Gültig bis
Protokoll     XI
Persistenz bis     2012-02-16 13:34:37.373
Endzeitpunkt     Wed Feb 15 13:49:39 CET 2012
Anwendungskomponente
Softwarekomponente
Service-Definition
Wurde bearbeitet     false
Any clues?
Many thanks in advance
Holger

Hi Ravi,
it's the Java stack's port.
Hi Venkata,
1. Check whether service user maintained in the SM59 destination is with Roles of std. user PIAPPLUSER, PIISUSER
         The Problem is, that the message is not processed in the PI. I don't see them at SXMB_MONI.
         Today I see them on the RWB at the message-monitoring, but only because they are set after the 3rd try to send them to NDLV.
         I can see the messages, after they are triggered, in the comm-channel-monitoring by selecting the appropriate channel.
2. Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
         Checked the PIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
3.May be wrong password for user PIISUSER.
         There was a pwd-change in january, but the passwords are all correctly replaced.
Thank you for your help!
Holger

Error Transmitting the message to endpoint -Received HTTP response code 401

Hello Experts,
I am having a SOAP to Proxy scenario. We are using HTTPS without client Authentication.
Everything is running fine and well set on DEV system. After transporting to Test system, i am getting error as :
Error Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.
I get HTTP 200 Ok response in my soap client but the message is not reaching to Integration Engine. It is failing with above error. On CC monitoring for SOAP adapter it shows call completed successfully. But when I use the mesage ID from CC monitoring in Message monitoring i get the error as shown above in Audit log.
I have checked for Roles attached to my user on DEV and Test systems , I have same roles on both systems.
Any inputs to solve this problem will be very helpful to me. Let me know which service users i need to check for this issue?
Thanks in Advance,
XI Queries.

Hi Pinang,
Thanks for input.
1) Check Role -SAP_XI_APPL_SERV_USER is there in XIAPPLUSER or not.
->Done. Its Ok.
2) check tyour port entry is like J2EE port 5<System no> or not.
->Done. Its Ok.
3) If the error in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
->This note refers in case it happens with high load. I am just sending a small request and no one else is using / testing this interface. So no high load.
4) Check password for user XIISUSER
-> Basis team said they checked for all Xi users and they are not locked.
5) Check password for user XIAFUSER
-> Basis team said they checked for all Xi users and they are not locked.
Any other hints will be helpful.
Kind Regards,
Xi Queries.

Server returned HTTP response code: 401

hi,
I am trying to get the tutorial example to run but always fails at "ant install", with the following error code:
file:C:/jwstutorial12/examples/common/targets.xml:15: java.io.IOException: Server returned HTTP response code: 401 for U
RL: http://localhost:8080/manager/install?path=%2Fgs&war=file%3A%2Fjwstutorial12%2Fexamples%2Fgs%2Fbuild
THe only thing I can think of is that the build.properties file is not good. It should be in my "home" directory. What exactly is my home directory and how do I define it?
thanks,
lingling.

Double-check your password, keeping in mind that property files can override the properties defined in your ant file. Below the tomcat.properties overrides the username and password:
<property file="tomcat.properties"/>

<property name="url" value="http://localhost:8080/manager"/>
<property name="username" value="tomcat"/>
<property name="password" value="tomcat"/>

Received HTTP response code 401

Hi,
I have scenarion JDBC - XI - RFC. Everything seems to be working till yesterday and suddenly i see an error in the communication channel. In the message monitoring the status is set to waiting and I see nothing in the sxmb_moni. Please see the error below
Transmitting the message to endpoint http://sapxd1.egd.enbridge.com:8019/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.
Thanks
Unni

Immo,
Go to SLD:
http://server:port/sld/ListServlet?bsview=true
Business systems and check if your XI business system has correct "Pipeline URL" parameter defined:
http://server:httpport/sap/xi/engine?type=entry
also check TCODE -> SLDCHECK - if you don't have any errors over there
Gaurav Jain
Reward Points if answer is helpful

Help needed to resolve Received HTTP response code 401 : Unauthorized

2011-04-08 11:37:48 Error Transmitting the message to endpoint http:---/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized
while i was executing file to file scenario. the error occoured.
Edited by: subbuk76 on Apr 8, 2011 8:12 AM

As the error indicates, the username/PWD you are using in file adapter to write the file (FTP) at target location is incorrect and hence the error. Please check and let us know.
3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Also, for HTTP errors in future do refer this blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
It will help you

Invalid Response Code 401 when calling webservice via wsil

Hi Experts,
I have some web services which use destinations which I maintained in Visual Admin under Web Service Security. For authentication I use SAP Logon Tickets. Everything worked fine until I applied SPS14 for nw04s. No I suddenly get the following Exeption:
com.sap.engine.services.webservices.espbase.discovery.BaseIOException: Invalid Response Code 401 while accessing URL: http://localhost:80/inspection.wsil. Response Message: Unauthorized. Content Type: text/html. Body Content: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  401 &nbsp Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  No login module succeeded.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b>  Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre>  No details available</pre></font></td> </tr> </body> </html>
    at com.sap.engine.services.webservices.server.management.discovery.DestinationsResolver.resolveURL(DestinationsResolver.java:220)
    at com.sap.engine.services.webservices.server.management.discovery.DestinationsResolver.resolveEntity(DestinationsResolver.java:120)
    at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.initialize(WSQueryImpl.java:184)
    at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.findWSInterfaces(WSQueryImpl.java:151)
    at com.sap.engine.services.webservices.server.management.discovery.ServiceDiscoveryImpl.getWSDLUrl(ServiceDiscoveryImpl.java:71)
    ... 58 more
The strange thing is, when I set the destination to use basic authentication with user and pwd it works again. But then the given user account is used for authentication and not the account of the calling user. If I return to logonTickets it works correctly! When I restart the server I get the error again.
Strange problem. I have this problem since I applied SPS14. Do I have to configure something additionally? I know there were changes made in the topic of web service security. Or could it be a bug of sps14?
Any help is appreciated!
Regards Manuel

Hi,
in sps14 the security levels are a bit stricter than before. So in my case, I was not allowed to access the inspection.wsil with web services. I solved my problem by changing the
[sap.com/com.sap.engine.services.webservices.tool*inspection.wsil] authentication stack (policy configuration) to look like this:
EvaluateTicketLoginModule SUFFICIENT
BasicPasswordLoginModule REQUIRED
CreateTicketLoginModule SUFFICIENT
and additionally I had to map the WSIL_SecurityRole security role only to the
role SAP-J2EE-Engine/all.
I hope this helps.
Regards Manuel

Encountered HTTP Response Code: 482 when using HttpURLConnection object

Hi, all.
I was writing a Java web project deploying to OC4J which is used for asynchronous polling to Microsoft CWA server.
At some time later, it is found that the polling fails due to HTTP response code: 482. However, on the CWA side, no exceptions and errors can be found.
I searched for long and didn't get any 482 response code related to HTTP.
Could anybody give a hand?
Thanks.
Edited by: xdallen on Oct 8, 2009 7:16 PM

It's not a standard HTTP response code. You will have to ask whoever sent it what it means.

HTTP response code: 401 for URL suddenly

I was using 1.4.2_01 and went back to 1.4.1_05 in order to get JACOB to work. (Java Com Bridge) -- to control Microsoft excel, word etc.
Switching back to 1.4.1 is giving me errors with my URL connections now. I was originally using an authenticator class but now it doesn't work. I even tried to set the connection manually and still no success. Any insight into this one? I reset my classpath and path variables. Hmmmm.... Was there something I had to set to use java.net stuff?
Connection code:
Authenticator.setDefault(new TestAuthenticator());
URL testUrl = new URL(urlString);
URLConnection yc = testUrl.openConnection();
BufferedReader in = new BufferedReader(new InputStreamReader(yc.getInputStream()));blah blah blah... Returns error code 401 because I'm not 'authentic' But I have authenticator code:
import java.net.*;
import java.io.*;
class TestAuthenticator extends Authenticator {
   private static String username = "userName";
   private static String password = "passWord";
   public TestAuthenticator() {}
   public PasswordAuthentication getPasswordAuthentication(){
    return new PasswordAuthentication(username,(password.toCharArray()));
}I just went back and recompiled in 1.4.2 and it works! Why not in 1.4.1?
Thanks!
Tom

Hi,
Has anyone come up with an answer for this?
I would also like to ask what would happen if I need to go through a proxy that also requires authentication in the first instance before connecting to the server which needs to autenticate me? Can you use the same autenticator subclass? What if the username/password are different on the proxy and webserver?
Thanks.

HT203175 keep getting error code 81 when trying to import cds into itunes

since installing itunes 11 i keep getting a error message which says an unkown error occurred (81) when trying to impoprt cd's
any ideas as to why would be helpful thanks.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Server returned HTTP response code: 401 for URL

i am trying to execute the following piece of code from a remote client:
URL url = new URL("www.abc.com/servlet/someservlet");
URLConnection conn = url.openConnection();
but i am getting a server returned 401 error, i did some research and i think my client needs a some kind of authentication to call that servlet. Can somebody send me a code snippet on how to do this?
thx

Assuming that your user ID is in a variable called "userName", password is in "password", and your URL connection is "urlC", try something like this:
// Construct the user name/password string and base64 encode it
String userPassword = this.userName + ":" + this.password;
String encoding =
new sun.misc.BASE64Encoder().encode(userPassword.getBytes());
// Set the authorization request property - use basic authentication
urlC.setRequestProperty ("Authorization", "Basic " + encoding);
// connect to the URL
InputStream content = (InputStream)urlC.getInputStream();HTH
Lee

HTTP Response Code 401

Hi,
I need to connect to a HTTP Page where Authorization is required.
The following is my fraction of codes:
String namePwd = getUserKey () + ":" + getPassword ();
String encodedAuth = new sun.misc.BASE64Encoder().encode( namePwd.getBytes() );
huc.setRequestProperty ( "Authorization", "Basic " + namePwd );
Eventhough I have the above codes, I still received 401,
Please help, what do i do wrongly?
Any help will be appreciated. Thank you.

"fraction of codes"? I think you mean "sample" or "snippet" or something.
Anyway, here are some other possibilities:
1) the encoder isn't working
2) the name and password aren't correct (maybe they're just wrong, or not being loaded correctly)
3) the server isn't configured properly (maybe it isn't configured with the names/passwords you think it is)

Error message : HTTP responce code: 401 Access denied

Hi,
I am working on Oracle OpenScript 8.5.
After record the script when i click on playback I got an error message in the following Bold lines code.
http.get(33, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "GET_DOC_PAGE"), http.param("Action", "GetTemplatePage"), http.param("Page", "TRAY_SEARCH_FORM")), null, true, "iso-8859-1", "utf-8/");
http.get(37, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("siteId", "FCOE"), http.param("siteRelativeUrl", "%2Fhttp%3A%2F%2Fstclnx01.satyam.com%2Fidc%2Fidcplg"), http.param("ssUrlType", "2"), http.param("IdcService", "COLLECTION_DISPLAY"), http.param("hasCollectionID", "true"), http.param("dCollectionID", "42")), null, true, "utf-8/", "utf-8/");
http.get(41, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("nodeId", "13"), http.param("siteId", "FCOE")), null, true, "iso-8859-1", "ASCII");
The error message in Result view is HTTP responce code: 401 Access denied .
The error message in Console View is oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 401 Access denied
Note: When i comment that Bolded Code then the script was passed.
Can any one help me... ..it's very urgent.
Thanking you.
Regards,
Ramesh Dodda
Edited by: Ramesh Dodda on Jun 11, 2009 1:27 AM
Edited by: Ramesh Dodda on Jun 11, 2009 1:40 AM

Hi
Do you need a username and password to get to the application ?
Regards
Alex

Reset the HTTP response code in OSB for proxy service

Hi,
I created a HTTP proxy service in ALSB with any XML message option. There are some business scnearios for which i need to send a custom error message in the HTTP body. I am replacing the $body variable with the error message and sending reply with success.As i am using reply with success it sends a HTTP response status code as 200 Ok.
However based on different error conditions i want to send appropraite http response code. How can this be achieved?

I would like to share the solution so that it would be useful to all the users of the forum.
There is a http:http-response-code element in the $inbound variable which is optional element. You need to insert this element to the $inbound using the insert action. Here is the extract of the code:
Insert [<http:http-response-code>401</http:http-response-code>] [ as last child of ] [./con:transport/con:response] in [inbound]
Please note namespace con belongs to "http://www.bea.com/wli/sb/context".
Edited by: [email protected] on Aug 12, 2009 10:47 PM

HTTP response code: 500 (Internal Server Error) when updating CMS

Hi all,
I'm using NWDI to develop a component.
After I have created Product and SC in SLD, I'm going to add SC into my Track. However the component doesn't appear in the list, even I have updated CMS.
Then I checked the CMS log file, it says
#1.5#00110915CACE0071000000190000185400042CDBD4231025#1175222575219#/Applications/CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.conf.manager.CmsConfManager#liuxiao#126#SAP J2EE Engine JTA Transaction : [1ffffffdf252200315]#shaw2k07_J2E_31401250#liuxiao#27a26201de6811db9d8c00110915cace#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.cms.pcs.conf.manager.CmsConfManager#Plain###Update CMS failed#
#1.5#00110915CACE00710000001C0000185400042CDBD4256832#1175222575375#/Applications/CMS#sap.com/tcwddispwda#com.sap.cms.ui.landconf.LandConfController#liuxiao#126##shaw2k07_J2E_31401250#liuxiao#27a26201de6811db9d8c00110915cace#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.cms.ui.landconf.LandConfController#Plain###CMSConfigurationException SLD (URL http://shaw2k07:50300) server exception: HTTP response code: 500 (Internal Server Error)#
How can I handle with this problem?
Thanks in advance.

Hi Pascal,
I have checked the SLD server log. When updating CMS failed, this log shows
#18 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
#17 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More...
#16 03/31/2007 22:17:21.226 [SAPEngine_Application_Thread[impl:3]_38] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
#15 03/31/2007 22:17:21.210 [SAPEngine_Application_Thread[impl:3]_38] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More...
and More says
#17 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors.
Thrown:
javax.jms.JMSSecurityException: You do not have permissions: action consumer and instance SLDClusterNotificationTopic.
at com.sap.jms.protocol.notification.ServerExceptionResponse.getException(ServerExceptionResponse.java:231)
at com.sap.jms.client.session.Session.checkReceivedPacket(Session.java:2613)
at com.sap.jms.client.session.Session.createConsumer(Session.java:2172)
at com.sap.jms.client.session.TopicSession.createSubscriber(TopicSession.java:39)
at com.sap.lcr.cimsrv.ClusterNotificationListener.<init>(ClusterNotificationListener.java:141)
at com.sap.lcr.cimsrv.ClusterNotificationListener.start(ClusterNotificationListener.java:68)
at com.sap.lcr.cimsrv.CIMOMServlet.init(CIMOMServlet.java:106)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:339)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
As for the
javax.jms.JMSSecurityException: You do not have permissions: action consumer and instance SLDClusterNotificationTopic.
I found information in this thread
SLD Connection failed
I'm quite sure that the user loggin into the SLD has the required role referred by "service.jms.default.authorization" "Security Role" "administrator". But it still doesn't work.
Btw when I restart the whole system the SLD server log also shows
FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
I just have no idea really...

HTTP response code 401 when trying to import webservice

Similar Messages

Maybe you are looking for