HTTP Sender Adapter - URL / Query String - Posting problems ?

Hi All,
Scenario: Partner sending order request via HTTP adapter to XI
I have configured my scenario and this is a sample URL I gave to Partner but when they try to post, they get "Connection Failed" error.
http://server.cmpny.com:1234/send/test/message?
service=Send_Order
&namespace=urn%3Asap-com%3Adocument%3Asap%3Aidoc%3Amessages
&interface=ORDERS.ORDERS05
&party=ABC&qos=EO/
Party Name : ABC
Service : Send_Order:
Interface: ORDERS.ORDERS05
Namespace: urn:sap-com:document:sap:idoc:messages
This partner has been "successfully" exchanging data for other messages using the same hostname/userid/passwd, so is there any problem my URL encoding ?
Any help is appreciated
Bob

Hey
i m not sure how u generated the URL for the scenario but the best approach would be to use the following HTTP test tool for it
/message/266750#266750 [original link is broken]
just use the code given by Mr.Stefan Grube .
secondly instead of host name ,give the IP address of the XI server.
Thanx
Aamir

Similar Messages

HTTP Receiver adaptor and query string posting

What woudl be the configuration of HTTP receiver adaptor in this kind of situation. I added some strings to the Prologue section of the receiver adapter but does not seem to work.
http://help.sap.com/saphelp_erp2005/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
I just need to ge the XML body in cmxl = {whole xml body}
does not work..any help would be highly appreciated

Hi,
Pls try this...
the value in the prologue field should be...
prologue : "field1=val1&field2=val2&cxml="
the http body is created by appending prologue with the xml payload and the epilog(if present)...
also pls make sure that the content-type set in the adapter is correct for your scenario...for example "application/x-www-form-urlencoded" would be the appropriate type for a normal html form post using http.
Thanks & Regards,
Renjith

URL in HTTP sender adapter

Hi,
I have a scenario where I want to configure a HTTP sender adapter.
I have a HTTP PUT url of a 3rd party application from where the HTTP adapter should poll and pull the files into PI.
Is this possible? If yes, where and how do I mentioon the URL?
Please help!
Thanks,
Pratibha.

Hi,
That means, the sender aplication has to write a http://<hostname:port>/<path>?<query-string> type query?
Is there no other option?
Is it not possible with the SOAP sender adapter also?
Thanks,
Pratibha.

HTTP Sender Adapter Strange Problem After SP16 Patch!!!

Hi,
after upgrading to XI SP 16 I'm no longer able to create HTTP Sender Adapter based Communication Channels. I can create a Receiver Adapter but no Sender since the Sender button is greyed out in the UI. Does anybody have an Idea what could be the problem here?
Kind regards,
Heiko

HI Heiko,
As stated by bhavesh you cant have a sender http adapter, infact there is no need to have it.
If you want topost message to the integration engine using http protocol,you can directly send the xml message to the pipeline url of the integration engine.
http://<host>:<Abap http port>/sap/xi/engine?type=entry
Yomesh

Mod_plsql: /pls/apex/f HTTP-400 Missing '=' in query string or post form

This is the message when I click the logout button. It destroys the session though. It should redirect to login page after clicking logout button.
We are on Apex 4.1
Bad Request
Your browser sent a request that this server could not understand.
mod_plsql: /pls/apex/f HTTP-400 Missing '=' in query string or post form
Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at xxxx.xxxxx.edu Port 443
Edited by: 965704 on Oct 30, 2012 11:42 AM

It has been fixed but the new problem is: After signout, if I move back to previous page and click some link using <- sign then I suppose to get the login page, but i am getting
ORA-44004: invalid qualified SQL name error message.
The source for my login page is
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':1'
);

How to use the http sender adapter

Hi,
I'm trying to use the http sender adapter but not getting the result.
1) I've created the commnunication channel in Integration Directory.
2) I have my url:
http://<server>:56000/sap/xi/adapter_plain?service=BS&namespace=urn%3Acompany%3Apoc&interface=interface
3) When i copy that url in a browser i get a login prompt. When i log in i get a message that navigation is cancelled.
What steps do i need to do to use this url to send my xml message to the adapter engine. Do i need a special system user for this? Any other tools required? (i have httpclient but using that doesnt send messages to the adapter_plain; i think)
I feel i'm just missing one little thing, but what is it.
kr
Robert

Hello Team,
I added the user name & pwd to query string & trying to access from IE and still getting blank page.
Is this what is expected or there is something wrong in URL. I am able to send the XML from HTTP Test tool.
My URL is :
http://abc:50000/sap/xi/adapter_plain?namespace=urn:xyz.com:A_To_ERP_Payment_balance_Request&interface=SI_A_CHK_balance_OUT&service=BC_XX_XXX&sap-user=myuser&sap-password=mypassword&sap-client=001&sap-language=EN
Please advice.

Enabling SSL for HTTP Sender Adapter

Hi Experts,
I'd like to have a step by step process in enabling HTTPS for Plain_HTTP Sender Adapter. I've already read the enabling HTTPS on SAP Help, but it does not provide much detail. Would the steps be the same for enabling HTTPS for Plain_HTTP Receiver which are:
1. Install the certificates using STRUST
2. Configure an RFC Destination using SM59
3. Call your RFC Destination in Receiver HTTP Adapter (not valid for http sender adapter)
The connection for setting up http is http://<hostname>:port/<path>?<query string>
but what about https? Would it be connecting to the webdispatcher first?
Hope you can help me,
Regards,

Hi,
as HTTP Adapter is on ABAB stack you will need to configure with STRUST.
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
The URL should start then with https, but you could test with this sample client:
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards
Patrick

HTTP Sender Adapter parameters

Hi,
I'm doing the HTTP to IDoc Scenario.
Receiving side is SAP ECC through receiver IDoc.
Third party system, they are asking to give the URL, so that they will include that URL in their program & it will post to SAP.
Can anybody guide me on this.. what parameters i've to get from the third party and what preparations i've to do in XI & ECC 6.0, so that i can give proper inputs to them.
And if sender CC is HTTP, any receiving IDoc CC configuration is required? Pls let me know the steps hw to proceed on this.
Thanks in Advance.
rgds,
balu

HI
Sender HTTP
You need to have a sap user for the third party in PI to post content on HTTP sender adapter channel
URL that you need to give to third party vendor
http://<hostname:port>/<path>?namespace=<namespace>&interface=<interface>&service=<service>(optional) &party=<party>(optional) &agency=<agency>(optional) &scheme=<scheme>(optional) &qos=<EO|BE|EOIO>
Receiver IDOC
Create RFC destination in SM59 for R3 system.and port in IDX1 for R3 system
IDX2 Improt IDOC metadata.
Thanks
Gaurav

WCF Basic Http Send Adapter Observation (BUG in WCF Adapter ?)

Hi,
I have a request response WCF Basic Http send adapter with URL say http://dds.testservice.com/service
I send a request and get a response in my orchestration. Everything works fine.
I have a scope around the send receive shape in orch to catch excpetion of service call.
To test this I changed the URL to http://dds.testservice.com/service1 and I got the exception in orch and caught.
But if URl is changed to http://dds.testservice.com1/service i.e I am putting invalid server name . Note the 1 after com.
In this scenario the WCF Send adapter remains in Active state for ever till terminated.
Why is this behaving this way. How will orchestration ever know if the send failed if its always in active state and no response sent back to catch block.
Is it a bug in BizTalk WCF Adapter ?
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

What you're experiencing is not unexpected.
The server name and the service path are completely different and, technically, have nothing to do with each other. They are resolved separately, and in different places.
"service1" is failing immediately because the host is getting the request but, not recognizing "service1" is returning an error immediately.
"*.com1" takes much longer to fail to the Orchestration because of the stack of timeouts and default retries in the Send Port and IP stack.
So, no, it is not a bug.

How to configure the Http sender adapter

Now i have look through the sap lib about the http sender adapter
and i know the url is
http://hostname:port/path?namespace=<...>
&interface=<...>&service=<...>&cmd=T&loaderXML=< message object >&end=yes
My questions are:
1)the path in the URL is "/sap/xi/adapter_plain", if not, what is it?
2)the message payload is right?
any reply is appreciated
Thank you very much

Hi Leo,
For a HHTP Scenario:
DESIGN:
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Create MessageTypes for the two datatypes.
3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mapping of the fields.
5. Create the Interface Mapping.
Configuration:
1. Import your Business System under your Configuration Scenario.
2. Create 2 communication channels. One for Http as a sender and one for your receiver say IDoc.
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
3. Do the Receiver Agreement for Idoc. HTTP doesnt need a sender agreement.
4. DO the Receiver Determination and Interface Determination.
Weblog which talk about the same scenario:-
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
(use case) and explained it...
Check this SDN tv demo, it has detail of HTTP adapter setup.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Refer to this link for adapter settings.
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned . U have to give all the configuration details in the URL.
If you give me your mail id or if you can mail me at [email protected], i can send you a HTTP CLIENT.....In which you need to view the source code and change the username and password to send message to XI.
Regards,
Abhy

HTTP sender adapter and receiver adapter

Hi guys,
I have a scenario that I have to communicate with an HTTP server with XML over HTTP.
When the communication is opened by me I will use an HTTP receiver adapter and give the connection parameters.
a) Do I have to use a different HTTP receiver communication channel for each different type of XML that I want to send??
b) When the communication is opened from the HTTP server, they have to type the URL in order to invoke the correct scenario on my side, right? I know that I do not have to use an HTTP sender adapter. They have to call the http URL, followed by the sender business system, sender interface name/namespace etc.
That means that the URL in the format: http://XIhostname:port/ is not enough right?
Is there a way to figure out from the type of the XML sent which scenario will be executed in XI?
Because it is difficult for them to use different URL when they are sending me different type of XML's, i.e. different requests.
Evaggelos

>>Do I have to use a different HTTP receiver communication channel for each different type of XML that I want to send??
Yes,receiver adapter is linked to receiver agreement,if you have different inbound interfaces then it means you need to have diferrent receiver agreement,hence different receiver communication channels.
>>That means that the URL in the format: http://XIhostname:port/ is not enough right?
No,its not,there is a test tool on SDN called "HTTP test tool".just search for that and download on your desktop,it will help you generate the correct URL as well as test the scenario by sending sample HTTP request.
One thing you need to keep in mind is that HTTP scenarios don't require and sender communication channel or sender agreement.they only need configurations on receiver side
Thanx
Aamir
FYI:Here is the test tool
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Edited by: Aamir Suhail on Jul 3, 2008 12:18 PM

Http sender adapter: QoS is interpreted as Best Effort by PI 7.11

Hi
I have a scenario, where I receive an xml OrderResponse via an http sender adapter and I then map it to an iDoc which is sent to the backend system.
BUT: for some reason, PI thinks, that the Quality of Service is BE, and I get the error "Only asynchronous processing supported for IDoc adapter outbound processg".
I have checked both the http sender adapter, the sender agreement, the interface mapping, the service interface and the operation mapping and nowhere can I see, that best effort is selected.
The OrderResponse is sent from an external partner and is routed through a load balancer and an SAP web dispatcher before arriving to PI.
Any suggestions would be highly appreciated.
MIkael Lund

The external partner is sending the OrderResponse to this URL (external URL):
https://xxxxxx.xxxxxxxx.dk/sap/xi/adapter_plain?service=LM&namespace=http://xxxxxxxx.dk/XCBL/OrderResponse&interface=xCBLOrderResponse35Out
this URL is being translated to an internal URL:
https://yyyyyyy.yyyyyyy.dk/sap/xi/adapter_plain?service=LM&namespace=http://xxxxxxxx.dk/XCBL/OrderResponse&interface=xCBLOrderResponse35Out
So how should the external and/or internal URL be altered?
Thanks for a very quick answer by the way
MIkael

URL query string block?

I was asked recently if there is a way to "block" the potential for someone to hijack a SWF by spoofing a variable via a URL query string.
For example, if there was a path variable hardcoded in the SWF that is pointing to data XML file, but someone found your path variable and typed in:
http://www.mysite.com/myFlash.swf?dataFile=maliciousdata.xml
That could change the variable in the SWF correct? Is there a way to block this behavior? Maybe a trick? Was thinking of delaying the declaration of the variable in the SWF in order to "void" anything coming in via the query string but want to know if there are other methods that could be used.
Thanks!

Hi,
in the old (AS1) days, url variables could become program variables. With AS3, you need to specifically retrieve them from an object
Of course, if you create your swf to do that (perhaps to see different data files during testing), someone else could abuse the feature

How to access FlashVars or URL Query String

I am a bit of a rookie with Flash/AS3 and I need help trying to access FlashVars or URL in Object/Embed tags. I've searched in the Internet and the forums but cannot get my head around how to implement this. Here is my example.
1) ACTION SCRIPT - I have created a simple flash banner with clickable button (sparkle) with a mouse down event.
The action script (AS3) for the button is the following:
sparkle.addEventListener(
    MouseEvent.MOUSE_DOWN,
    function(evt:MouseEvent):void {
        var url:String = "http://www.[site_url].com/as/img.cfm";
      var request:URLRequest = new URLRequest(url);
        var variables:URLVariables = new URLVariables();
        variables.gphc = "382";
        request.data = variables;
        request.method = URLRequestMethod.GET;
      navigateToURL(request);
     *** the core issue to resolve is how to make the line above (variables.gphc = "382";) to be set dynamically. I would like for the variable to come from the FlashVars or the URL vars
2) OBJECT/EMBED - my object/embed code with include FlashVars and URL Query String
<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0" ID="bannerAD" WIDTH="728" HEIGHT="90">
     <PARAM NAME="movie" VALUE="http://www.[site_url].com/images/imgs/flash_ad.swf?gphc=382">
    <PARAM NAME="quality" VALUE="high">
    <PARAM NAME="bgcolor" VALUE="#FFFFFF">
    <PARAM NAME="FlashVars" value="gphc=382" />
    <EMBED src="http://www.[site_url].com/images/imgs/flash_ad.swf?gphc=382" quality="high"WIDTH="728" HEIGHT="90" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash" FlashVars="gphc=382" />
</OBJECT>
Questions that I need answered ... How do we access the FlashVars or the URL Query String? I have found many references to loaderInfo but no clear way to implement that I'm able to understand. So if the loaderInfo is the key, where do I add in the loaderComplete() function into my action script above in #1?
function loaderComplete(myEvent:Event)
var flashVars=this.loaderInfo.parameters;
gphcTextField.text=flashVars.gphc
this.loaderInfo.addEventListener(Event.COMPLETE, loaderComplete);
Any help is much appreciated.

Thank you for your input. I implemented your sugguestion in the following way without any success. Notice below in the addEventListner that I have added the snippet of code. Is this a good place (correct place) to set the local_var? I did confirm that the FlashVars and URL variables were set.
sparkle.addEventListener(
     MouseEvent.MOUSE_DOWN,
     function(evt:MouseEvent):void {
         var url:String = "http://www.[site_url].com/as/img.cfm";
         var request:URLRequest = new URLRequest(url);
         var variables:URLVariables = new URLVariables();
         var local_gphc:String = LoaderInfo(this.root.loaderInfo).parameters.gphc;
         variables.gphc = local_gphc;
         request.data = variables;
         request.method = URLRequestMethod.GET;
       navigateToURL(request);
Thank you for your help.

HTTPs sender adapter to pick file from a external HTTP file location

HI gurus
Please see the problem here. I need know hoe to configure the Sender HTTP adapter.
My Scenario-
A Flat file (non-xml but structured) sitting on an external https enabled web server. I need XI to go out and get this file on a regular basis (which will then be processed laterby the business person)
Thanks
VL

Hi,
The FTP Adapter will do the job for you. Just create a File Communication Channel and change Transport Protocol to FTP. Since you mentioned that the file is non-xml, in the Message Protocol, choose, File Content Conversion.
Here are some blogs that will help you:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
FYI.. HTTP Sender adapter is not required to be configured because a HTTP request will directly come to the ABAP Engine
Regards,
Balaji.M

HTTP Sender Adapter - URL / Query String - Posting problems ?

Similar Messages

Maybe you are looking for