HTTP Server for Windows 64 bit not on the companion CD
Hi,
I cannot find the HTTP Server for Windows 64 bit on the companion CD. Any idea where I can get it from? For the 32bit version the HTTP Server is on the Companion CD.
Thanks in advance,
Florin
If i am correct reason should be : Oracle Application Server 10g will run as a 32-bit application
Following platforms have the same media in either case:
Microsoft Windows 32-bit and EM64T/AMD64
(Not Itanium-64, which is separate and referred to as "Windows 64-bit")
Linux x86 and Linux x86-64
Solaris Sparc 32-bit and Solaris Sparc 64-bit
As the Oracle Application Server 10g will be run as a 32-bit application. See the Installation Guide or readme files for any specific steps on these 64-bit platforms.
Refer the Note.433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches
Similar Messages
-
iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?
This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing
-
ITunes for Windows will not play the next song in the list
Hello,
I cannot get iTunes to play the next song in my list (general list, not a playlist). The random icon and/or repeat icon is not blue. Every time I press the next button (two arrows to the right), it picks another song from my list, instead of the one that is directly beneath the one that is playing.
I have iTunes version 11.0.1.12.
Has anyone have this happen before and how did you solve it? Thank you for all your replies.
Ilona T.Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden -
Windows could not display the images available for installation
I am trying to perform unattended installation of windows which I created with Windows AIK. When I add answer file on USB's with windows installation root I get "windows could not display..." message. Problem is there even when there are just a
few simple lines (oobe, microsoft international core-WinPe).
I replaced install.wim file of standard windows installation iso with customized install.wim and then created catalog file with windows system image manager.
Kind people of world, please help!Hi bugili,
Could you help us post the complete error information, it will more helpful when we locate the issue. I am not quite understand “add answer file on USB's with windows
installation root”, do you mean the answer file and install file on the external device? Please try to confirm this image has the same Security permission with
others image in WDS image share folder, the WDS default image location is like
x:\RemoteInstall\Images.
If it not work please post the WDS error log,
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
The simlar thread:
Windows could not display the images available for installation.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/07fe03dd-9798-4583-8d0b-dc963c95434c/windows-could-not-display-the-images-available-for-installation?forum=winserversetupMore
information:
How to Add a Boot Image to WDS Server
https://social.technet.microsoft.com/wiki/contents/articles/11643.how-to-add-a-boot-image-to-wds-server.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows could not start the Server service on local computer Error 193:0xc1
Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
JoseHi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Windows could not update the computer's boot configuration Server 2012
I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps. -
Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)
I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam -
Companion CDs for 64-bit Oracle HTTP Server for AIX5L(64 bit) required.
I need Companion CDs for 64 bit Oracle HTTP Server for AIX5L(64 bit).
I tried to install using
as_ibm_aix_companion_101300_disk1.cpio & as_ibm_aix_companion_101300_disk2.cpio
but when i checked the files present in <Oracle_Home>/ohs/lib , they are of 32-bit.
Also i tried with Oracle 10.1.2.0.2 but still the server is installed as 32-bit.
Is 64-bit Oracle HTTP Server supported on AIX5L(64 bit) ?
If yes, then from where can i download the CDs?
Any suggestions will be appreciated.Greetings,
Try this link:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201aixsoft.html
Regards,
Bill Chadbourne -
How do i Install the Software Update Server for Windows 7?
How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.
-
windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?
Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012
I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I just purchase a photo shop and then realize it was for windows and not a mac. Here is the information from my purchase. The order was through my paypal from Valada Harp
Adobe Photoshop Elements 13 & Adobe Premiere Elements 13 (Windows,English)
1057-1619-6173-1547-6758-9171
1143-1300-3153-3314-1230-901
Please refund my money.
Valada HarpJust to clarify, Valada:
1.— This is a user forum; you are not addressing Adobe here.
2.— You're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content
3.— Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situation happens.
It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
3. Wait a minute or so for the report to finish.
4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit.
Maybe you are looking for
-
Trying to get home sharing working on a corporate wireless network. Cisco wireless. WLC5508 controller Cisco 3502 access points All apple devices on same WLAN - security WPA2-PSK ITunes account up to date All devices laterst software. Can ping apll
-
I am looking for an easy way to map DB fields to GUI fields. My plan is to "setName()" my GUI textFields to the same name as my database fields. That gives me an easy way to get the DB field name and value from the GUI; for example.... JTextField.set
-
Fpga: Communicating between fpga and third party program running on pc
I am using a C-Rio to control a planar robotic joystick. The goal is to use the joystick as a force feedback controller for a computer game running on a pc. My program as is for now runs a program on the fpga to read the encoder values and run the pw
-
scroll ball doesn't work. there is nothing like NOKIA as we can easily view messages through NOKIA PC Suite
-
LSMW Error - You have not fully maintained the descriptions
Hi Experts, I was trying to Extend the materials to plant by using Direct input menthod where prog - RMDATIND. When I execute final step i.e "Start Direct Input Program" I faced with an error " You have not fully maintained the descriptions". I know