HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Similar Messages

Mail failing to load after 10.8.1 update

My mail client refuses to open after updating last night. The system error is
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Could not create ~/Library/Containers/com.apple.mail/Data/Library/_ˇˇˇ/f«/
Any one else having problems?

If the printer is connected to the Mac via USB cable and you do not see it in the Default Add Printer view when you try to add it, then it could be the USB cable at fault. So if you have another USB printer cable then try this.
If the Mac still fails to see the HP then open System Information (Applications > Utilties) and in the left column, select the USB entry. The top right pane will show all the USB connections in your Mac. The HP should be visible in this list.
If the printer is not connecting to the Mac via USB but via wireless, then I believe for HP you do have to rely on the HP Software to add a network printer. So maybe check their web site for a later version of this network utility, as the one that came with the printer is probably not compatible with 10.8.

IMac won't boot - Failed to load extension com.apple.driver.applemacriscAGP

Hello, so I have an iMac G4 17" (running 10.4) and it was unfortunately not connected to a very good surge protector. The power surged and a fuse blew and now when I try starting it up it chimes and then just sits at the gray screen with the apple logo. Here's what I've tried:
Booting into verbose and single-user modes, this is what happens:
Failed to load extension com.apple.driver.applemacriscPCI
Couldn't alloc class AGP
Still waiting for root device
Still waiting for root device
Still waiting for root device etc.
Booting into Open firmware mode:
I'm able to do everything just fine, including resetting the nvram
Resetting PRAM:
Works fine, chimes when appropriate
Starting from Tiger install DVD:
Works just fine, I'm able to access all the utilities and was able to copy files off to a flash drive with the terminal. I used Disk Utility to repair the drive and repair the permissions, both of which ran successfully. I did a clean install of Tiger and then repaired the drive and permissions. I selected the new install on the hard drive as the default start-up disk. Still it sits at the gray screen and I still get those same errors in Verbose and Single-User modes.
I found the source code (a cpp file) for the com.apple.driver.applemacriscPCI, but don't really know how to compile it and what headers are necessary etc, and even if I did I don't know where I would put it since the problem can't be on the hard drive after I did a clean install. I have not yet tried completely reformatting the drive before an install but doesn't the installer do that anyway?
Any help would be much appreciated.
Message was edited by: Yost Smith

There may be some circuit damage in the computer; due to the surge of power.
Sometimes, a computer and its owner get lucky and when a surge disables a
Macintosh, a reset of the Power Management Unit (PMU) can help restore the
normal functions. Often, when this works, the computer may not go past the
grey screen at all, until the PMU is reset.
Instead of a simple surge protector, my computers are powered through a
backup power supply; an uninterruptable power unit with battery backup.
These also have automatic voltage regulation. Forget common protectors!
On the iMac G4 series, the PMU reset button is under the metal plate on the
bottom and is hard to see. There may be instructions with images available
online, perhaps in Apple Support's knowledge-base. This would also be in
the official service manual in pdf electronic documentation, for a tech repair.
How to reset PMU in iMac G4:
http://support.apple.com/kb/HT1712
You may have to see if the Apple Hardware Test can show error codes and
other hints of hardware damages; and perhaps a tech visit is not far off...
Good luck & happy computing!
edited.

Live bookmark feed failed to load is greyed and no updates fo latest headlines

'live bookmark feed failed to load 'is greyed and no updates for Latest Headlines.
Most Visited,Getting Started ,Cusromised links and all others OK.

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Try to remove the current Latest Headlines feed and create a new feed.<br />
You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process:         Pages [208]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [93]
Date/Time:       2012-08-22 12:33:15.909 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          102101 sec
Crashes Since Last Report:           11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process:         Pages [13521]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.3 (1048)
Build Info:      Pages-10480000~1
Code Type:       X86 (Native)
Parent Process: launchd [153]
User ID:         501
Date/Time:       2013-03-11 14:57:02.175 -0400
OS Version:      Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 -   0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

Microsoft Office Apps fail to work after 10.6.7 update

Has anyone else's office apps failed to open after installing the OS update?
This is a brand new iMac only 5 days old using office 2011 with current updates.
Regards.
Mike.

After doing some Internet research and speaking with a second-level Apple tech, together we came up with the following solution.
Shut down, then start in safe-mode (hold shift key while re-starting). This will clear the font cache and re-build it. After doing this, when I started Word 2004 it took some time, but it showed the following fonts as corrupt: APC Courier, Bastion, Chicago TU, Courier TU, Latinski - and indicated they should be removed. Word then started up even though I just clicked OK to those messages and didn't remove them. I then re-started Word and it came up normally even though those fonts are still in the font book. By the way, I have downloaded the freeware app "Fontnuke-1.17," but haven't used it yet. There is a shareware app, "Fontfinagler," which may also be useful if safe mode doesn't work for you.
Branton
California
iMac 27 i7 with 250 GB SSD and 2 TB HD, 8 Gb RAM, 10.6.7, running Office 2004 for Mac

Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoit

help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

Enterprise Manager failes to load after installing Oracle IDM on LINUX86x64

Hi Folks
We are into a serious problem:
We have completed these tasks till now on RHE Linux 86 x 64 bit
Install Oracle Database 11g - working fine and running
Install WebLogic Server Version: 10.3.5.0 - working fine - Console opens fine
Install IDM - Installed successfully with errorr -Only EM console was not configured , rest installed peacefully
Now the problem is, we want to access Oracle EM but it fails to load with this error:
Got TargetException for : target = Farm_base_domain , type = oracle_ias_farm
Collapse Hide Additional Trace Information     Hide Additional Trace Information
oracle.sysman.emSDK.app.exception.EMSystemException at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler._getFarmInstance(EMASConnectionHandler.java:1266) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getFarmID(EMASConnectionHandler.java:288) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getTargetInfo(EMASConnectionHandler.java:450) at oracle.sysman.emSDK.adfext.ctlr.AuthUtil.doTargetAuthProcessing(AuthUtil.java:186) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPostInitContext(EMPagePhaseListener.java:436) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.afterPhase(EMPagePhaseListener.java:234) at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:532) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:203) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$200(ADFPhaseListener.java:23) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:232) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:276) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:77) at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:54) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:399) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
But when i go to WL Console > Deployments > em - it says active and OK
Can someone please help how to make EM run?
Any idea guys what could be the problem here?
Please help!
Regards
Dev

Ok, I saw that there were two parallel schemas running, now when i deleted one of them, i can see only one soa-infra, but its down :(
How can we make it run?
Here is the error:
Invoking Start Up operation for application soa-infra on target soa_server1.
[Deployer:149193]Operation 'start' on application 'soa-infra' has failed on 'soa_server1'
[Deployer:149034]An exception occurred for task [Deployer:149026]start application soa-infra on soa_server1.: .
Operation Start Up on target soa-infra Failed. Please see error logs for details.
Aug 6, 2011 8:38:58 AM BST
     Error     BEA-149202     Encountered an exception while attempting to commit the 7 task for the application 'soa-infra'.
Aug 6, 2011 8:38:58 AM BST
     Error     BEA-149265     Failure occurred in the execution of deployment request with ID '1312616332249' for task '6'. Error is: 'weblogic.application.ModuleException: ' weblogic.app
Upon doing a search on this i found that these errors occur only after when we trying to deploy any application, but its a fresh installation and we are not trying to deploy any thing yet and we should not get this error.
Any Help?
Edited by: user12128585 on Aug 6, 2011 12:55 AM

Applet fails to load after loging into the system

Hi
I'm developing a web application for playing multi-player games. The game is played in an applet. I've written the applet and all worked well when embeding it in an ordinary jsp page. The problem starts when I try to start the applet as after logging into the system - it doesn't load and in java console I get:
load: class pl.cardq.applet.ChatApplet not found.
java.lang.ClassNotFoundException: pl.cardq.applet.ChatApplet
     at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:183)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:127)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:626)
     at sun.applet.AppletPanel.createApplet(AppletPanel.java:778)
     at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2045)
     at sun.applet.AppletPanel.runLoader(AppletPanel.java:707)
     at sun.applet.AppletPanel.run(AppletPanel.java:361)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:286)
     at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:44)
     at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:173)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:170)
     ... 9 more
I guess tit's because some sort of security restriction...
Any help more than welcome

Thanks for the reply.
The connection is ok but I figured out that it's not about the logging in.
The applet stops loading when I add jsf to an ordinary jsp page. (in jsp it works fine)
Can you help me with that?
My page code is:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<f:view>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<h:form>
<f:verbatim escape="false">
<applet code="pl.cardq.appletChatApplet" archive="CardQApplet.jar" height=450 width=400>
<PARAM name="USER" value="cama">
</applet>
</f:verbatim>
</h:form>
</body>
</f:view>
</html>

Internet appears connected but pages fail to load after 3-5 minutes! HELP!

I purchased my Macbook three weeks ago and it immediately found my network and connected. A few days later my computer failed to load internet pages (both in firefox and safari). The connection would not disconnect, or seem to slow. I diagnosed and found no problems. To get it to work for small amounts of time I turn off airport and then turn it back on and get a few minutes before I get "Problem Loading Page".
I have updated the firmware in my router. I use a D-Link Router WBR-1310 and a D-Link Cable Modem DCM-202. I have called my cable provider, Comcast, and they tested the connection saying it was strong. I connected directly to the modem and it never failed to stop loading pages the full 20 minutes I was connected.
My computer has no problem connecting to other connections: The Library, neighbors, my parents' home. There are no time outs and it automatically connects through Airport, no problem.
I have called D-Link about the router. They're a bit confusing in troubleshooting the problem. They told me to connect my Ethernet cable to the computer and manually put in IP address, subnet mask, router address, and name server address. First, I don't know where to find any of that except for the IP address. Secondly, do they expect me to connect and leave the ethernet cable in my computer?
Have there been any problems with Macs and this router? What am I doing wrong and has D-Link given me good steps to take? My experience with them hasn't been so great so I'm skeptical. All of this is very upsetting, I can't enjoy my new Macbook at home.

FrankInColorado wrote:
Yes I had read about this. The point is, especially with something such as wireless, it has to inter-operate with everyone else out there. You would think Apple would do some testing before going to some "recommended" standard that obviously is not widely used in the real world. To someone who just bought a new MacBook, it doesn't matter that Apple is using the "new" recommended way. They just want to be able to connect everywhere they go.
No, networking is a world of standards and recommended procedures. This all used to be a lot easier when there were actual engineers who understood the RFCs running most networks.
You seem to think Apple just throws software over the wall. If that's true, you should swing by Cupertino some time and see if you can meet with a member of their software test groups; I'm sure they'd love to know that you think they don't do anything.
Or perhaps Apple is supposed to test their software with every ISP on the planet first.
And how many people posting in these forums have said when they turn Airport off and back on, then things work again for a while. If the issues are on the other side, why would that make any difference?
Did I or anyone else here say that changing to OpenDNS' servers would solve every issue with every person in each and every one of these threads?
But there have been many cases where switching to OpenDNS' servers does solve people's network delay issues. Hmmm, I guess Apple's cluelessness doesn't apply in those cases.
Come on. He connected directly to the modem and was loading Web pages for 20 minutes without any problem. He goes back to using Airport and the problem reappears. And you think it's reasonable to assume it was just a coincidence that the supposed DNS issue went away while he was connected to the modem and reappeared when he went back to Airport?
It depends now, doesn't it, as I just said.
Perhaps he tried "surfing to a few sites" while connected directly, and when that worked he went back to AirPort. Did he try going to the same sites? Different ones? We don't know.
In fact, even if he did visit the same sites, that wouldn't tell us anything either way as the DNS resolutions for those sites would have been cached when he was connected to the wired network.
This is the same thing that has happened to me since upgrading to Leopard. My wireless started going bad after some minutes of accessing Web sites. If I rebooted the machine, it would be fine again for a while. I finally just turned Airport off and plugged in an Ethernet cable. I have not had any trouble with accessing Web sites since - same ISP (Comcast), same DNS servers.
Tell me there is no Airport issue.
I never said there weren't issues. No one did. Except you implied I did.
Your approach to troubleshooting seems to be "Ah, Apple's software is broken, why bother."
1) There are many people whose problems have been solved by switching to OpenDNS' servers. That's fact.
2) There are many ISPs who have broken DNS servers. That's also fact.
3) Comcast has a variety of DNS servers spread across the country, so your results in Colorado may differ from those of a Comcast subscriber in a different state. Fact again.
4) You asked for reasons, I gave them, you don't like them. Obviously I must be an Apple shill. Funny, I'll have to ask why I haven't received a paycheck from Cupertino. Ever.
I understand your frustrations if AirPort isn't working for you, but don't turn around and drop into troubleshooting threads and tell people why suggestions we're making can't possibly address their issues just because they haven't solved your particular issue.
That would be just as silly as me assuming that because I haven't seen an AirPort drop since 2007, all of those posting in threads here are simply delusional or incompetent.
The only way to find out what's wrong in each case is to be methodical, and step one in diagnosing network delays is to see if DNS is at fault.
If it is, great, problem solved. If not, on to step two of a nearly infinite sequence.
One step at a time.

Plugins Failed to Load after AE Update

After updating to 11.0.2.12 I receive this error when starting After Effects.
XDCAMH.prm
ImporterFastMPEG.prm
ImporterMPEG.prm
All three failed to load.

I'm not saying it causes "more" issues than it provides fixes, it's just causing other issues. Of course this is a typical case of "YMMV", but I've seen too many issues popping up over the last few days to really give this a clean bill, and that's not even counting the notorious unreliability of Application Manager/ Update Manager. Well, whatever, anybody is free to try, just don't say you haven't been warned....
Mylenium

Nvidia module in X fails to load after Patch 118844-28

I'm new to Solaris so please bear with me.
I just received a shipment of Ultra 20 workstations and while setting up one of them, I used the Update manager to install all the patches. After installing the kernel update, X fails to run since the Nvidia module doesn't load, which makes sense since its a new kernel(Is this wrong, I'm used to Linux).
So I download the latest nvidia module from Nvidia.com and the installer runs with no problem. I reboot and still no go.
I've looked around and found something about using the update_drv command, and I tried that with no luck. Used reboot -- -r to reconfigure everything and still nothing. There is nothing that stands out from dmesg, so I'm at my wits end.
Any ideas?

After installing
the kernel update, X fails to run since the Nvidia
module doesn't load, which makes sense since its a
new kernel(Is this wrong, I'm used to Linux).I don't know why X or the Nvidia module fails after the kernel
upgrade...
But for Solaris is does not make sense that drivers start to fail
when the kernel is patched. This assumes the driver is using
documented kernel interfaces only - in this case a kernel update
should not cause driver failures.

Hwmond high cpu load after 10.6.8 update

hwmond is causing up to 70% cpu load after every reboot on several xserves i manage caused by the update to 10.6.8. anybody else having this problem? it can be solved by hwmond -s5 to set the hwmond interval to 5 seconds but this command is not processed properly, is causing an error message "IOConnectMethodScalarIScalra0 call return err = 0xE00002BC" and has to be exited with cmd+c. Also, the com.apple.hwmond.plist in LaunchDaemons is empty.

In my case:
I installed 10.6.8 via the Combo Update, was running 10.6.7 previous to this.
/System/Library/LaunchDaemons/com.apple.hwmond.plist still exists and is not empty
/etc/hwmond.SMART still exists and is not empty
/etc/hwmond.conf didn't exist, so from Terminal.app I simply issued "sudo touch /etc/hwmond.conf"
I tried:
In Terminal.app, ran:sudo launchctl unload /System/Library/LaunchDaemons/com.apple.hwmond.plist
Then, backed up /usr/sbin/hwmond and /System/Library/LaunchDaemons/com.apple.hwmond.plist
From a Mac Pro running 10.6.7 Server, copied both the binary and the plist to the same spots on the Xserve, then, in Terminal.app, ran:sudo launchctl load /System/Library/LaunchDaemons/com.apple.hwmond.plist
That didn't change a thing. hwmond still spiked.
Put everything back the way it was.
And:
In Terminal.app, ran:sudo launchctl unload /System/Library/LaunchDaemons/com.apple.hwmond.plist
Backed up /System/Library/LaunchDaemons/com.apple.hwmond.plist
Made another copy to the Desktop
Edited this copy and added a string in ProgramArguments with a value of "-S255", but this still caused hwmond to spike after putting this copy back in LaunchDaemons, repairing permissions, and loading the plist via launchctl again. Any valid value still caused it to spike. However my Xserve now reboots if I set the value to an invalid value, like "-s256". Then again this also caused com.apple.hwmond and com.apple.launchd to create entries in the system log complaining about the value with hwmond attempting to relaunch itself every 10 seconds:
6/24/11 2:37:10 PM com.apple.hwmond[2697] hwmond: n should be 1 to 255 seconds
6/24/11 2:37:10 PM com.apple.launchd[1] (com.apple.hwmond[2697]) Exited with exit code: 1
6/24/11 2:37:10 PM          com.apple.launchd[1] (com.apple.hwmond) Throttling respawn: Will start in 10 seconds
OP, Armin, did something similar, but I think he tried doing it directly in Terminal, not using launchctl / launchd, which caused the error he mentioned.
Finally, added a "Disabled" item, with a boolean value of YES to the plist, recopied it, repaired permissions again (launchctl will complain and won't load the plist if you don't). This way hwmond is disabled, I can reboot my Xserve, and wait until Apple figures this out.
Full com.apple.hwmond.plist on my Xserve looks like this now:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>com.apple.hwmond</string>
          <key>OnDemand</key>
          <false/>
          <key>Program</key>
          <string>/usr/sbin/hwmond</string>
          <key>ProgramArguments</key>
          <array>
                    <string>hwmond</string>
                    <string>-s255</string>
          </array>
          <key>ServiceIPC</key>
          <false/>
          <key>Disabled</key>
          <true/>
</dict>
</plist>
Edit: I too have filed a bug report with a link to this thread included.
Second Edit: Server Monitor.app still works after disabling hwmond via the plist even after a reboot.
Third Edit: Sorry, keep remembering things, a modified /usr/sbin/hwmond was included the 10.6.8 Server Combo Update package, but not the Delta. Not sure if this matters. How has everyone updated to 10.6.8 so far? Like I mentioned, I used the Combo.

"View failed to load" error when I open Resources - Project Server 2013

Hello,
I get the following error when I open the Resources Page (I am using Project Server 2013):
"The view failed to load. Press OK to reload this view with the default settings. Press Cancel to select another view"
Help please.

Hi,
Is your environment up to date with the latest SP/CU?
HAve you tried selecting another view?
See those hotfix :
http://support.microsoft.com/kb/2760261/en-us
http://support.microsoft.com/kb/2863881/en-us
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

RSS - Live bookmark failed to load - Firefox, RSS feeds not updating

I am new to this forum, and I figure this has been covered before. However, I'm not finding an answer.
I have a Beehive workspace and go to Recent Activity to subscribe to the RSS feed. When using Firefox, I am prompted for my username and password. The RSS feed works until I quit Firefox. After restarting Firefox, I get the "Live bookmark failed to load" message.
If I try to access the feed with Safari, I have the option to enter my username and password, and then save that info in my keychain. I'm trying to determine if the reason the RSS feed isn't updating because of some authentication problem.
People using Internet Explorer have also reported problems with Beehive workspace RSS feeds not updating, so I'm trying to find a solution.
Not providing reliable RSS feeds is slowing down adoption of our workspace, and people aren't wanting to use the workspace until I've resolved the RSS issue.
Can you point me to a solution or to information on how to resolve the RSS updating issues.
Thanks.

HI,
The RSS feed is password protected as you have to be an authenticated user to access the complete system. The issue seems to be in the browser - if it does not trigger a check for username/password and then prompt if not set there is a li9mited amount we can do.
We are working on getting the subscriptions inside beehive working which will generate notifications but that will not be available for a week or so.
Phil

HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Similar Messages

Maybe you are looking for