HTTP web request error (Web exception for remote server)

To whom it may concern,
I have recently applied a few patches for my client's server for IE9 but then one application starts to malfunction right after upgrade return successful. The program affected is CyberTech player which make use of Microsoft Silverlight.
My client currently uses Wind 2008 R2 x64, patches applied are below:
MS13-009-IE9-Windows6.1-KB2792100-x64
MS13-010_IE9-Windows6.1-KB2797052-x64-sp1
MS13-021_IE9-Windows6.1-KB2809289-x64
MS13-028IE9-Windows6.1-KB2817183-x64
MS13-037_IE9-Windows6.1-KB2829530-x64
MS13-038_IE9-Windows6.1-KB2847204-x64
MS13-047_IE9-Windows6.1-KB2838727-x64
MS13-069_IE9-Windows6.1-KB2870699-x64
Please let me now if any further information is needed.
Your prompt response will be much appreciated.

Hi,
Based on your description, I would like to suggest you try to uninstall and reinstall the latest version of Microsoft Silverlight.
http://www.microsoft.com/silverlight/
I also would like to suggest you update the CyberTech player so that it can be compatible with this update.
Meanwhile, the http web request error was caused by IE itself:
1. Improperly install or configure updates
2. Security website authentications issue
3. IE settings
You may try the following steps to check the issue:
1. Run IE with no add-ons. Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
2. Try to use compatibility mode (go to tools --> Compatibility View Settings) to check the issue.
For further research, it would be kind of you to capture a screenshot of the error page.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Similar Messages

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

Web Access for Remote Desktop on Windows Server 2012

Hello,
i've a Windows Server 2012 without a domain. So i installed the remote desktop session host, the remote desktop license server and the remote desktop gateway as a server role only. All is working fine. Without a domain, no management tools for remote
desktop are available. So i configure the remote desktop via the registry. I define (via registry) some remoteapps, too. All values are copied from a running Windows Server 2008 R2. So the remoteapps are runing.
Now i want to use the new Microsoft Remote Desktop client for Android. To use a remoteapp i must define a remote resource. To define a remote resource i need a url to the web access for remote desktop. So i installed the web access. But if i login to the
web access, i don't see any remoteapp. What's wrong? I've set the ShowInTSWA to 1. What must i do to access an existing remoteapp via web access?
Martin

Hi Martin,
Server 2012 RD Web Access is designed to retrieve published RemoteApps and Desktops from a Server 2012 RD Connection Broker and/or a Server 2008 R2 RD Session Host server. From your description it doesn't appear that you are using either of the above.
I know it is a more complicated set up, but you should consider having a domain, creating a RDS deployment, etc., so that you can use the full featureset as it was intended. You can do it all on a single server if needed. For Server 2012
there is a hotfix that needs to be applied to permit RD Connection Broker to work on the same server instance as active directory.
-TP

Server settings for remote Server in Flash Builder 4.5 Premium

Has anyone figured this out? Seems like everyone is talking about FlashBuilder that comes with PHP and that doesn't help me. So I'm still having trouble moving my mobile app to a remote server and I have FlashBuilder 4.5 Premium without PHP.
I have created a PHP project outside of Flash Builder and then I have connected to it using the Data/Service tab, but then it ask for the server information and that is where I'm having the issues.
It works create with the setting like this.
MAC:
Server Options
Web Root: /Applications/MAMP/htdocs
Root URL: http://localhost/
But when you try to export a release build or just like to test it, and insert your server settings.
Server Options
Web Root: /home/username/domain_name/
Root URL: http://mydomain.com
It doesn't Validate which in turn won't let the project work. Also it would be nice to put the remote server in there for testing instead of just for release builds. Any one have an answer. Every tutorial or explanation shows localhost.
thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

Connetion String for Remote Server

Hey All, I'm new to Oracle so please bear with me if i ask somethings that should be fairly obvious. I'm attempting to connect to a remote server using OCCI and i have no idea how to set up my connection string to accomplish this. I've read through the OCCI programming guide particularly section 3.1 (Connecting to a database) but the examples leave the connection string variable empty. Could someone please furnish me with an example connection string that could be used to connect to a remote server? That would be greatly appreciated. If there's any information you need from me to help answer this question let me know. Thanks, Mike

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

CF Flash Remoting Settings For Remote Server

I am trying to setup Flex Builder 2 for evaluation, with Flex
Builder on a Windows XP machine and ColdFusion (7.0.2) on a remote
server. When attempting to start the Flex Project Wizard using
Flash Remoting, I am having trouble understanding what the settings
should be for root folder and root URL. Nothing I've tried,
including hints based on other posts, has helped.
It would be helpful to have an example in the help docs for
this type of situation. It can't be uncommon and I see a few others
have had similar trouble. Thanks.

On your machine, these are the settings (I use CF with IIS,
not the standalone CF server):
On Project Properties>
Flex Server: ‘C:\CFusionMX7\wwwroot’
Root URL: ‘
http://localhost/’
When you upload to your remote server, upload the entire
Output Folder (usually ‘bin’). You can leave out the
xx-debug.html and xx-debug.swf files, but upload all the others.

Error during connection to https web-service via proxy-server

Hello!
I have created Web Service Proxy using wizard in JDeveloper. Then added some code for authorization on my corporate proxy server.
Then I was trying to connect to two different web services
- first one was HTTP web-service - successful
- second one was HTTPS web-service - failed with error :
<Error> <Net> <BEA-000903> <Failed to communicate with proxy: myproxy/myproxyport. Will try connection target_url/443 now.
java.net.ProtocolException: Server redirected too many times (4)
     at weblogic.net.http.HttpsClient.makeConnectionUsingProxy(HttpsClient.java:433)
     at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:358)
     at weblogic.net.http.HttpsClient.New(HttpsClient.java:527)
     at weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:239)
     at com.sun.xml.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:136)
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:187)
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:124)
     at com.sun.xml.ws.transport.DeferredTransportPipe.processRequest(DeferredTransportPipe.java:121)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
     at com.sun.xml.ws.client.Stub.process(Stub.java:272)
     at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
     at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
     at $Proxy30.queryRange(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
     at $Proxy31.queryRange(Unknown Source)
     at com.volga_dnepr.wsi.fusion.model.sched_mov.SchedMovSoap12Client.main(SchedMovSoap12Client.java:54)
Although if i switch off proxy server everything works perfect (both HTTP and HTTPS web-services).
What could be the problem with?

Hi Kenneth,
At the moment, SALT does not support the configuring of an outbound proxy server. I suspect you could use a transparent proxy server, i.e., a proxy server/router combination that proxies outgoing requests, although this isn't something we have tested. My suggestion would be to open a support case and ask for this enhancement. I think it is a reasonable thing for SALT to support.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Trouble 'putting' dynamic web pages to remote server

I have a site defined in DWCS5. I have two servers defined, a local testing server on my computer and the remote server at the hosting company. I have no connection problems with either. I can put 'static' web pages from the local testing server to the remote server without any problems.
But when I try to 'put' a page that relies on dynamic content from my local testing server, all of the connection code is based on the local connection, it doesn't get updated to the remote connection code. When I browse to the page on the remote server, I get errors, essentially file not found errors because the connection code is looking for the local resourses.
Warning: require_once(../Connections/localhost.php) [function.require-once]: failed to open stream:
The code should read require_one(../Connections/bluehost.php) to run properly on the remote server.
There are two different connection files in the Connections sub directory. There is the one with the connection code to access the local database and then there is another with the connection code to access the remote server's database. The code in both files is correct and works when called on the appropriate server.
If I go through and edit on the remote server and manually correct the code, the page will work, but then my local page has the remote server's connection strings and won't work again. I'm getting really good at running FIND/REPLACE.
I just have to change the name of the connection.
I need to be able to transfer a dynamic page from local to remote and have the connection code updated so that the code on the remote is for the remote and the code on the local is the code for the local.

I think I figured out my own problem.
I made the database connection information exactly the same for the local server database and the remote server database. Now when I upload the local data to the remote server it seems to be working.
I guess I over thunk it.

ESS Absence request Error : Lock Exception

Hi,
     When a user is trying the absence request application , she is getting the following error, she is the only user getting the error.
We did a server restart but that didn't solve the problem.Please suggest
#2#sap.com/pb/PageBuilder#com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_36 failed to acquire exclusive lock on client session ClientSession(id=(J2EE258694500)ID0000822451DB11319429603123595159End_1457644797). Existing locks: LockingManager(ThreadName:SAPEngine_Application_Thread[impl:3]_36, exclusive client session lock: ClientSessionLock(SAPEngine_Application_Thread[impl:3]_35), shared client session locks: ClientSessionSharedLockManager([]), app session locks: ApplicationSessionLockManager([]), current request: sap.com/pb/PageBuilder).Hint: Take a thread dump of the server node to find the blocking thread that causes the problem.
     at com.sap.tc.webdynpro.clientserver.session.ClientSession$LockingManager.lock(ClientSession.java:1511)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:233)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hi,
    Have you deleted the locks from system administration->Monitoring and under portal check object locking. see if there are any locks and see if you could delete the locks.
If the system is hanged you can restart the server0 (or server<n>) node to resolve the issue, but the issue may recur. Permanent solution is described in the note 1234847. There is a ppt attached to the note, you can proceed as described there.
Cheers!!!
Umang

Configuring web.xml for Weblogic Server 5.1

Hi,
I am working on Weblogic Server (WLS) 5.1 SP 12. I have a web application running on it. At present, it does not have a web.xml file. I want to use Front Controller pattern, and therefore I need to have a web.xml file (to specify the URL Pattern for Front Controller) inside WEB-INF directory on server. I have placed the web.xml file inside WEB-INF directory of application, and have marked the URL pattern. However, the application is not taking into consideration that thing, i.e. mu front controller is not getting into picture, its entry is being ignored. How to make sure that it is not by-passed?
My application is not in a .war format. WLS 5.1 SP12 is running on Sun Solaris.
Is there a way to make sure that the intended thing happens?
Plz help.
Regards,
Raj

Yes, I restarted the app server after making changes to web.xml file. No effects.

How 2 pass a request from a broswer to remote server via a proxy server

hi my program is on a proxy server it will be lisenting in port 9876
i have configured in a way that all browsers request pass thro this proxy server
so when user request for www.yahoo.com in the browser the
resquest is passed 2 this proxy server. so i got the host name and created a socket.
i read all the request that has come from the browser such as "GET www.yahoo.com HTTP/1.1 ,,"
I got the outputstream for the remote socket and i passed all these request to the remote host.. but i could nt get any response frm server can any one help me out?
===
import java.io.*;
import java.net.*;
class Proxyserver
ServerSocket ser;
Socket myclient;
BufferedReader br;
String cf1="\r\n",cf2="\r\n\n",lf="\n";
OutputStream o_remote;
public Proxyserver()
try
ser=new ServerSocket(9876);
myclient=ser.accept();
// read inital requst from browser
br=new BufferedReader(new InputStreamReader(myclient.getInputStream()));
String req=br.readLine();
String temp=req;
int val=temp.indexOf((int)'/',11);
String host=req.substring(11,val);
//connect 2 host
Socket remote=new Socket(host,80);
System.out.println(remote.toString());
o_remote=remote.getOutputStream();
while(req!=null)
System.out.println(req);
o_remote.write(req.getBytes(),0, req.length());
o_remote.write(cf2.getBytes());
o_remote.flush();
req=br.readLine();
o_remote.write(lf.getBytes());
o_remote.write(lf.getBytes());
o_remote.flush();
// wait for response from remote server
InputStream in=remote.getInputStream();
int response=in.read();
while(response!=-1)
System.out.println((char)response);
response=in.read();
//close all sockets
remote.close();
myclient.close();
ser.close();
}catch(Exception e){}
public static void main(String a[])
new Proxyserver();
===
op i got all the req from the broswer and wrote 2 op stream of remote server but i could nt get the response
==
output"
Socket[addr=javaworld.com/130.94.4.230,port=80,localport=3225]
GET http://javaworld.com/ HTTP/1.0
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
Accept-Language: en-us
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322)
Host: javaworld.com
Proxy-Connection: Keep-Alive

Hi
Just look for JspSmartUpload classes ..
this will help u
U can use
<input type=file name=f >
thanks
regds

Defining Alias for Remote server Directory / Path

Hi All,
         In my process chain I have an open hub process after which I have an abap program which sends out the data to a file on a remote server directory. But when it executes the program, it cannot find the path mentioned although I checked whether it is correct.
I have also seen in several instances that for the remote server directory / path, the entire path is not typed in the variant's selection screen; instead it seems like an ALIAS. For example, if the path is
w3n2-s501\javaappserver_test_staging\m234\sapdata on remote server w3n2-s501, then the selection screen fileds show up like this:
Remote Server Directory/Path     P               SAPTEST
Remote Server Name                     P                          w3n2-s501
Does anyone know where this SAPTEST would be defined for the remote directory path?
Thanks!

Hi
http://help.sap.com/saphelp_nw04s/helpdata/en/bd/0d6c3db297ff4d8a84e656502531f0/frameset.htm
Hope it helps

Error in connecting a remote server

hi friends,
Though Cisco VPN i'm trying to establish connection with a remote server.The VPN connection is successfully established
but when trying to logon to the sap server it gives NI(Network Interface error)
Can any one give some idea on what can be the problem?
thanks,
sachin soni

Hello,
Can you confirm if the system is up via normal intranet ?
If yes, please also check with your network guys if have openend ports 3600-3699. These ports are used by SAP NI interface.
Regards,
Siddhesh

Create EJB Control For Remote Server

I'm having trouble creating an EJB control for a EJB residing in a remote server.
First, I've a JAR containing the remote/home interfaces and added it as a Library in the WLW 8.1 application.
When creating a new EJB Control, there's no way to successfully create the control.
At the STEP 2 GUI:
I am able to specify a JNDI-NAME, but the home/bean interface fields are empty. If I click on "Browse application EJBs..." button, nothing is available. If I click on "Browse server EJBs", it only shows EJBs in the current server.
Thanks

Hi
I believe you are on Workshop8.1 Spx.
This is a known issue. The reason the ejb does not show up as an application ejb because we have just the interfaces as a library and not the whole EJB.
Since the EJB's are not deployed on the server it will not show up either.
Unfortunately there is no way to point to a remote domain and get all the ejb's deployed there.
Workaround:
You can deploy the ejb locally, create the ejbcontrol and then undeploy the EJB. You need to manually change the home jndiname to use the remote server url.
Thanks
Vimala

Commandline option to capture JFR for remote server

Hi,
Is there any jrcmd option to start flightrecording for any remote server where xmanagement port is enabled? Through mission control we have option to create a JVM connection using xmanagement port and capture JFR . We need to have it through commandline .
Thanks

Hi Janice,
It seems like the java that is on your path does not have OJVM installed. (Either you missed that JDK when you did InstallOJVM.bat, or InstallOJVM somehow wasn't truly successful.)
To find out the java home directory, you can write a simple program that does:
System.out.println("java home is " + System.getProperty("java.home"));
and run it from the command line.
However, it might be quicker for you to just specify the full path for java like this:
C:\oracle\ora92\j2ee\home>C:\jdev\jdk\bin\java -ojvm -XXdebug,port4000,detached,quiet -jar oc4j.jar
(Substitute "C:\jdev\jdk" with your jdev's jdk directory.)
Hope this helps!
-Liz

HTTP web request error (Web exception for remote server)

Similar Messages

Maybe you are looking for