HTTP with RFC destination problem

Hi,
We're doing an SAP R/3 --> XI --> External System scenario. We've had no problems making the SAP R/3 to XI work. For XI to External System, we're using the Plain HTTP adapter with an RFC destination. The Server, Intermediate and Root CA of the External System have been already installed on the ABAP layer of XI using the transaction STRUST/STRUSTSSO2 . The Server Certificate and Root CA of XI have also been installed on the External System Server. The problem is that everytime we test the RFC destination, we are still getting an ICM_HTTP_SSL_ERROR
Additional Parameters:
SSL has been enabled on the RFC destination
All three certificates can be found in STRUST
Regards

HI
is the certificate same for both of you have installed external system certificate and external system have PI certificate
Check SAP note 510007
Check similar threads
ICM_HTTP_SSL_ERROR
ICM_HTTP_SSL_ERROR for plain HTTPS with RFC Destination type G
Thanks
Gaurav

Similar Messages

PROBLEM WITH RFC DESTINATION

Hi GURU,
I have a problem with the record of RFC destination.
When i created RFC destination TCP/IP when i made the tests, it`s ok.
But when i used this rfc destination in a function of ABAP. I have an error. The error is:
RfcExecProgram'#Win32 error 2: The system cannot find the file speci
Can you help me??
What should I do to run properly?
Thank for all.
regards,
RAFA

Hi,
Even I am also new to SAP , but I have little knowledge about RFC, try to create your RFC of type 3 (ABAP type ), then if you use this RFC , I hope no problem will come if the authorization details and IP /Host name of the destination system are perfect.
also Please suggest me why ( when ) we use TCP /IP type of RFCs

Creation of RFC Destination problem

Hi Experts,
I need to establish an RFC communication between TREX7.0 server running on windows 2003 server and the SAPR/3 4.7 EE server running on windows2000.
server. Initially i used TREXAdminTool to create RFC Destination, i was unable to create successfully
Then i used SAPR/3 server from TCODE: SM59, here also am facing the same problem, what are the values i have to give for
1. RFC Destination, 2. Program id 3. Gateway Host and Gateway Service.
PLZ guide me step by step procedure with some example values to create RFC Destination to TREX Server successfully using TREXAdminTool or from SAPR/3 server---SM59
ADV Thanks
Regds
phanikumar

Hi,
Till now i didn't install explicitly any SAP Gateway on TREX server.
I installed TREX server along with SAP Netweaver WEB AS java.
Shall i need to install any SAP Gateway to configure RFC Destination?
If so can you give me the procedure how to install explicitly SAP gateway?
Regds
Phanikumar

Rfc Destination problem in RFC Sender Adapter

Hi experts
I created a Rfc destination type TCP/IP for Rfc Sender adapter.
while creating i passed following parameter:
1) I selected Activation Type option-> Registered Server
2)Given a Program id , same as i given in Rfc sender Adapter config.
3)Gateway option:
   i) Gateway Host:Server IP address where i created Rfc.
ii) Gateway Service:sapgw00
After making these entry, i m unable to receive message at XI end (I am executing Rfc at R/3 site due to Rfc sender)

Hi
please check for the following things.
1. check the RFC destination using the connection test tab in the R/3 system.
2. check whether the program id that u have given is registered or not.
to check the program id go to the transaction SMGW, in the menu select Goto-->LoggedonClients
check for ur program id name in the table.
3. when you configure the RFC sender adapter in XI then you have to give the same program id name that you will give while creating the RFC destination in the R/3 system.
if u still face the problem please reply me back.
Thanks
Rinku

RFC destination problem in SWF_XI_CUSTOMIZING

Hi,
SWF_XI_CUSTOMIZING
While performing SAP XI customizing (Automatic workflow customizing) on the node Maintain Runtime Environment, the system is asking question like below..
Configure RFC Destination:
RFC user has wrong password. Synchronize password?
Thanks,

Hi Raja,
check the RFC destination from R/3 to XI and XI to R/3....
The Business Process Engine (BPE) processes integration processes at runtime. Since the BPE uses functions of the Workflow Engine and generates workflows from integration processes at runtime, you must customize the Workflow Engine automatically by using transaction SWF_XI_CUSTOMIZING before you can use the BPE.
also check ...
http://help.sap.com/saphelp_nw04/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/5c29eb96803e2be10000000a1553f6/frameset.htm
Regards
Biplab

Calling Method with RFC Destination

Hi
This is probably a dumb question, but here goes. Is it possible to call a method with a RFC destination ?
Thanks
Jill

hi in your method pass the Destination as importing parameter, adn then you can call rfc in side the method by giving destination.
you can do only this way.
regards
vijay

Prob with RFC destination - 4.5B 2 XI ABAP

Hi,
I created an RFC destination type 3(R/3 connection) in 4.5B, to address Integration Server.
It gives the following error.
<b>Connection error : Conversation 09163404 not found / CPI-C error CM_PARAMETER_ERROR</b>
Can any one guide me on this.
-Naveen.

Hi,
Please check on 'Authorisation to Read Metadata'at the end
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
Regards
Vijaya

Issue with RFC destination during HCM - VDS - IDM configuration

Hi,
I am trying to configure HCM and IDM (v7.1) using VDS. I am following the Configuration Guide. While creating the RFC Destination, I specified program ID as LDAP_VD and in Gatewayhost I have entered the host of IDM Server (where VDS is also installed). In Gateway service I have put sapgw00. But when I do connection test, I get u201CERROR: SAP gateway connection failed. Is SAP gateway started?u201D. Looks like it is trying to connect to IDM server and is looking for sapgw00 (on port 3300) and is not able to find it.
What could be the reason for error? Am I doing RFC destination configuration correct? Do I need to put HCM system host in the Gatewayhost field?
Regards,
Anurag

Hi Anurag
You have to enter the hostname of the SAP server, not the LDAP server.
The LDAP connection is configured later.

TCP/IP RFC destination problem

Hi All,
During the RFC destination creation, im using TCP/IP connections.. So please tell me what should be filled for the following fields:
Program
Target Host
Save as          Hostname Ipaddress
Please let me knw what should be the required steps, since when i had provided some information in these fields and tried to test; it gives the following error:
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host DELECC6IDES / sapgw00
Error Details     DETAIL: no connect of TP PROGRID from host DELECC6IDES.bcone.com after 20 sec
Error Details     COMPONENT: SAP-Gateway
Any valuable help?
Thanks
rohith

Dont worry
Sender Port is not mandatory. Only the target port is mandatory
In SM59,
-Have you given the connection type as 3
-In the Target Host, give the IP Address of the target server
-System Number is to be filled
-Now, go to the Logon/Security tab,
-Give the language
-Client
-Username and Password of the destination server
-Now. Save it.
-Test Connection.
Hope the information is helpful

Configuring RFC destination for control recipe

Hi,
There was a very good document in SDN which explains in detail how an external control recipe destination has to be configured with RFC destinations etc. written by somebody from IBM.
I cant find the document in the forum now.
Can any body please help me on this?
Thanks in advance.

Dear,
Please check these links,
[RFC destination |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c]
[Link2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246]
[LINK3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208c4788-7f02-2a10-da80-bbaf7a202780]
Regards,
R.Brahmankar

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

Ignore pop-up in RFC destination

Hi all
In ruining program with RFC destination when the program comes to the RFC i get a pop-up
that ask for user and password ,how can i avoid that ,i want to ignore the pop-up and run the program until the end .
when i put the user and pass the RFC bring the data that i want.
BR
Nina

Hi,
When you create the RFC destination in SM59, you have to define your target system as TRUSTED system(One checkbox will be there). Then you will not get the pop up.
Regards,
Ravi Kanth Talagana

Help with RFC sender, Program And RFC Destination

Hi!!
my scenary is asynchronous
     RFC Sender -> SAP-XI -> Oracle reciever
I have a problem with abap, especially rfc, program and rfc destination. The connection with SAP-XI exist and SAP-XI receive the message but the message is empty.
1. In my program on the line
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          catch an error system_failure = 2 and it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC
2. I rewrite my program, that line to
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' STARTING NEW TASK 'NEW' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          catch an error communication_failure = 1 but the rfc ZBAPI_SD_PED_ORD_SERVIC is executed but no send to SAP-XI
3. I rewrite my program, that line to
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' IN BACKGROUND TASK DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          No error but it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC and the message in SAP-XI is empty, display the tables but not the row. i check the table PED_ORDEN and RETURN but the controls fields dont are afected.
What is my Error?
Where am i making a mistake?
RFC
FUNCTION zbapi_sd_ped_ord_servic.
*"Interfase local
*" TABLES
*"      PED_ORDEN STRUCTURE ZSD_RFC_T04
*"      RETURN STRUCTURE ZSD_RFC_R06
TABLES: zsd_ped_orden, zsd_rfc_r01.
DATA: tb_ped_orden LIKE zsd_ped_orden OCCURS 0 WITH HEADER LINE,
               tb_rfc_orden_error LIKE zsd_rfc_r01 OCCURS 0 WITH HEADER LINE.
*Get Pedido by Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_ped_orden
          FROM zsd_ped_orden
          WHERE estatus EQ space.
LOOP AT tb_ped_orden.
    MOVE-CORRESPONDING tb_ped_orden TO ped_orden.
    APPEND ped_orden.
    tb_ped_orden-estatus = 'X'.
    tb_ped_orden-fecha_actualiz = sy-datum.
    tb_ped_orden-hora_actualiz = sy-uzeit.
    MODIFY tb_ped_orden.
ENDLOOP.
MODIFY zsd_ped_orden FROM TABLE tb_ped_orden.
COMMIT WORK.
*Errors in Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_rfc_orden_error
          FROM zsd_rfc_r01
          WHERE estatus EQ space.
LOOP AT tb_rfc_orden_error.
    MOVE-CORRESPONDING tb_rfc_orden_error TO return.
    APPEND return.
    tb_rfc_orden_error-estatus = 'X'.
    tb_rfc_orden_error-fecha_actualiz = sy-datum.
    tb_rfc_orden_error-hora_actualiz = sy-uzeit.
    MODIFY tb_rfc_orden_error.
ENDLOOP.
MODIFY zsd_rfc_r01 FROM TABLE tb_rfc_orden_error.
COMMIT WORK.
ENDFUNCTION.
PROGRAM
REPORT ZBAPI_SD_PED_ORD_SERVIC.
DATA: ped_orden LIKE ZSD_RFC_T04 OCCURS 0 WITH HEADER LINE,
      return LIKE ZSD_RFC_R06 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
     TABLES
          ped_orden             = ped_orden
          return                = return
EXCEPTIONS
    communication_failure = 1
    system_failure        = 2
    OTHERS                = 3.
IF sy-subrc <> 0.
MESSAGE 'error' type 'I'.
ENDIF.
COMMIT WORK.
RFC DESTINATION
RFC Destination: ZXI_ENVIAR_PED_ORD_SERVIC
Connection TYpe: TCP/IP Connection
Register Server Program: ZBAPI_SD_PED_ORD_SERVIC
Gateway host: host00
Gateway service: sapgw00

hi
For rfc sender adapter we hv to do some settings .Please chk whether this settings are well configured or not.
a) RFC destination
b) RFC channel in the XI directory
This weblog is a response to a few question about the basic configuration of the RFC sender adapter
that were posted on the XI forum (and also on my e-mail)
So here we go, basically we have to configure 2 things:
a) RFC destination
b) RFC channel in the XI directory
RFC destination:
1. To create the RFC go to TCODE: SM59
2. Create new destination of type T (TCP/IP)
3. Make sure you select Registered Server Program option before writing your program ID
4. Write you program ID (remember it's case-sensitive)
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server)
7. No configuration in the J2EE administrator nessecary
Now we can proceed to RFC channel configuration:
1. Enter your Application Server
2. Your Application Server Service
3. Enter your Program ID from the RFC destination
And we're done:)
Now you can test the RFC destination in SM59 to see if it works.
Please chk this following link.
1. RFC Processing with the RFC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
2. Configuring the Sender RFC Adapter -
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
3. /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
regards
Manas

RFC Destination with other Environments and Execute. Please help

Hi GURU,
I have a problem and I would like your help.
I'm new at Abap and I'm trying to develop an application from ABAP to connect to an environment of java.
I watched how to do this in various forums and the help of SAP, but just as I have found make the connection.
In java I have already developed the server side and I have developed a ABAP function. But is not exactly how it works.
Can you give me an example of how to send data from the sap application to java? Or give me any manual please.
Another problem is,
As I record the RFC destination?
When I run a BAPI ABAP occurs to me the following error:
RfcExecProgram'#Win32 error 2
Because it can be?
Thank you very much in advance
RAFA

The (Alesis Digital Audio Tape) ADAT optical I/O gives 8 channels up to 48Khz 24bit and 4 I/O at 88.2, 96 Khz... this are the technical specifications for this connectors!
http://www.nationmaster.com/encyclopedia/ADAT
If you need to use 8 ADAT I/O at 88.2/96 you need to buy device such as
Yamaha MY16at (for Yamaha Digital Mixer) http://www.studiocare.com/store/index.php?mainpage=product_info&productsid=62346
and similar devices
... or Motu 828MK3 that comes with 2X ADAT I/O....
Motu 828MK3 is able to work with up to 8 ADAT channels at 88.2/96 and up to 16 ADAT I/O at 44.1/48.
BUT... Apogee Ensemble comes with only 1X ADAT I/O... so you can use up to 4X 88.2 I/O channels and you need a second Ensemble unit for reach 8 ADAT I/O.
Optical connectors can be used also for 2 I/O at 192Khz...
in this case this kind of connection will be named as TosLink, even if it uses the same ADAT plug.
cheers
G

HTTP with RFC destination problem

Similar Messages

Maybe you are looking for