Httpd.conf settings for multiple vhosts

If you configure multiple vhosts in your httpd.conf file, how do you specify different hds- and hls-live apps dirs in said httpd.conf file?
It appears these settings can only point at one location... and if your vhosts don't share an apps dir... I don't get how you could point to the correct location for individual vhosts.

Can you expand on this? I have tired to answer below
LoadModule vhost_alias_module modules/mod_vhost_alias.so
<VirtualHost *:8080>
 DocumentRoot "/dirlocal/apps/adobe/fms/webroot_8080"
<IfModule hlshttp_module>
<Location /hls-protected-1>
 HLSHttpStreamingEnabled true
 HLSMediaFileDuration 10000
 HttpStreamingContentPath "/dirremote/hls-8080/protected1"
 HLSFmsDirPath ".."
 Options -Indexes FollowSymLinks
</Location>
<Location /hls-protected-2>
 HLSHttpStreamingEnabled true
 HLSMediaFileDuration 10000
 HttpStreamingContentPath "/dirremote/hls-8080/protected2"
 HLSFmsDirPath ".."
 Options -Indexes FollowSymLinks
</Location>
</IfModule>
<IfModule jithttp_module>
<Location /hds-protected-1>
 HttpStreamingJITPEnabled true
 HttpStreamingContentPath "/dirremote/hds-8080/protected1"
 HttpStreamingJITConfAllowed false
 JitFmsDirPath ".."
 Options -Indexes FollowSymLinks
</Location>
<Location /hds-protected-2>
 HttpStreamingJITPEnabled true
 HttpStreamingContentPath "/dirremote/hds-8080/protected1"
 HttpStreamingJITConfAllowed false
 JitFmsDirPath ".."
 Options -Indexes FollowSymLinks
</Location>
</IfModule>
</VirtualHost>
<VirtualHost *:8181>
 DocumentRoot "/dirlocal/apps/adobe/fms/webroot_8181"
<IfModule hlshttp_module>
<Location /hls-protected-1>
 HLSHttpStreamingEnabled true
 HLSMediaFileDuration 10000
 HttpStreamingContentPath "/dirremote/hls-8181/protected1"
 HLSFmsDirPath ".."
 Options -Indexes FollowSymLinks
</Location>
<Location /hls-protected-2>
 HLSHttpStreamingEnabled true
 HLSMediaFileDuration 10000
 HttpStreamingContentPath "/dirremote/hls-8181/protected2"
 HLSFmsDirPath ".."
 Options -Indexes FollowSymLinks
</Location>
</IfModule>
<IfModule jithttp_module>
<Location /hds-protected-1>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "/dirremote/hds-8181/protected1"
HttpStreamingJITConfAllowed false
JitFmsDirPath ".."
Options -Indexes FollowSymLinks
</Location>
<Location /hds-protected-2>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "/dirremote/hds-8181/protected1"
HttpStreamingJITConfAllowed false
JitFmsDirPath ".."
Options -Indexes FollowSymLinks
</Location>
</IfModule>
</VirtualHost>

Similar Messages

Delete httpd.conf file for apache!

I have mistakenly deleted httpd.conf file for apache.. then the localhost was not work anymore!! .. How can I solve this problem? I have XOS 10.9

Look in the Originals folder inside the apache2 folder. Make a copy of the original httpd.conf file.

Can't change sort settings for multiple items in iTunes 7.1

iTunes 7.1 introduces a great feature—the ability to set a separate Sort Name, Sort Artist, Sort Album, etc. This means that "Weird Al" Yankovic songs can finally appear down among the Y's instead of up at the top of every list, by changing the Sort Artist to Yankovic, Weird Al.
Unfortunately, this feature is fatally crippled in 7.1. As far as I can tell, you can only change the Sorting information on individual tracks. When you change the information for multiple tracks, the Sorting tab doesn't show up. This renders the feature all but useless.
Let's say (hypothetically) that your friend is an enormous nerd (in theory) and your friend has 139 "Weird Al" Yankovic tracks (for the purposes of this example only, of course). Instead of just selecting all these tracks at once and changing the Sort Artist to Yankovic, "Weird Al", I (I mean, he) has to retype this information for each individual track. That's crazy! Surely this must be a bug.
Core 2 Duo 20" iMac Mac OS X (10.4.8)

I just found the solution to this myself.
In a very un-Apple way, this is an undocumented feature only accessible by right- (or control-) clicking.
1. Change one track to your desired sort settings (for instance, set the Sort Artist to Yankovic, Weird Al.
2. Right-click on that track. In the contextual menu that appears, there is a new submenu called "Apply Sort Field." If you choose "Same Artist," it will apply your new sorting information to all your other tracks by "Weird Al" Yankovic (or, if you are not a huge nerd, any other artist you substitute).

Httpd.conf configuration for Apache plugin

Hi,
anyone have a sample httpd.conf file configured for proxy to WL 6.1, but only
limited content?
Meaning : static content is served on the apache (gifs, html, ...) and ALL THE
REST is proxyd to WL...
The WL part i guess is like this :
<IfModule mod_weblogic.c>
WebLogicCluster x:7001,y:7001
CookieName WebLogicSession
MatchExpression *.*
</IfModule>
Its the Apache part I cant find any info on.
Thanks in advance.

try this:
<IfModule mod_weblogic.c>
WebLogicCluster x:7001,y:7001
CookieName WebLogicSession
MatchExpression /SERVLET_NAME
MatchExpression *.jsp
</IfModule>
That should do it ... but you should know that there are more problems down that way ...

Copy/Paste Develop Settings for multiple images

I'm trying to update some settings on multiple images. In Develop mode, I start by making the corrections to a single image, and then click the "Copy ..." button. I then select multiple images in the Filmstrip and click "Paste". This works just fine, but only on the 1st image/highlighted image, and not the whole selection. Am I doing something wrong here? Shouldn't I be able to update multiple images, at once, like a batch process?
Thanks in advance.

Hi Lee Jay
How do you know this is on purpose? It seems like a bug to me.
See this thread: http://forums.adobe.com/message/2951457
If your reasoning was correct, how come the settings do paste to the entire target selection and not just the active image when the toggle in the lower right hand side of the screen is switched to Auto Sync?
Would love to hear more of your insight, because this is really confusing me.
Best
Adam

Login Settings for multiple language sites

I'm using the standard ADDT Control Panel Login Settings for a site that has multi-country and multi-language areas. However, the global redirect pages (login, redirects) can't be customised to each specific country area as they need a direct page reference. How do I get round this so I can have individual page redirections per country?
Ta!

Hi Matthew,
 
 just an idea: let´s assume you´re storing the country areas in the main "users" table like this:
 
 - en
 - de
 - fr
 
 ..., you could...
 
 1. add a recordset to the global redirect page like this:
 
 "SELECT country_area FROM users WHERE user_id" equals the Session Variable kt_login_id
 
 2. implement a simple standard PHP redirection which embeds the recordset´s value, like this:
 
 <?php header('Location: http://www.yoursite.com/page_'.$row_queryname['country_area'].'.php' ) ; ?>
 
 This should translate to "page_en.php", "page_de.php" etc etc
 
 Cheers,
 Günter Schenk
 Adobe Community Expert, Dreamweaver

Different "Keep" Settings for Multiple Podcasts

Anyone know a way to set the Keep settings for podcast son a case-by-case basis? I know you can set it to something minimal like most recent, last 3, etc. for your whole podcast library and then choose the Do Not Auto Delete option by right-clicking on individual podcasts to keep all the episodes of the selected podasts.
However, I have many podcasts that, for now, I want to keep all episodes; I have one podcast I'd like to set to only keep the most recent; and one podcast I'd like to set to keep the last 10 episodes.
Any workarounds, or AppleScript options that people know of? I checked out Doug's AppleScripts for iTunes, but didn't find anything there. Thanks!

josh,
i came on here looking for the same answer...this is probably the single most lame setting (or lack thereof) in itunes...I love apple and i'm a mac enthusiast who has converted 2 friends in the past 3 months, and i think they've done this for simplicity's sake, but it drives me up a wall to have a universal "keep" setting. The "Do Not Delete" is not enough, i'd love to have different keep settings for my podcasts.

Best project settings for multiple outputs

Hi guys,
I have a project that will be needed to be outputted to many different formats (web, hd, sd, flash etc).
What's the best settings for a project of this type... obviously the highest common denominator... but your suggestions would be appreciated.
PS... I'm is Australia (PAL), and the project will only be displayed in Australia.

You got it - highest resolution requirement. Then use Compressor to create the lower rez versions from your exported Quicktime.
Patrick

Can I alter security settings for multiple users of fingerprint reader on iphone 5 - i.e. if i allow my daughter to set her fingerprint, can I stop her from accessing itunes store to make purchases???

My daughter wants to access my iphone 5 by adding her fingerprint. Can I alter the security settings so that she cannot make itunes purchases etc?

Not if you want to be able to continue to make iTunes purchases too. You can lock out access to iTunes store using Restrictions (which always needs a passcode to change, Touch ID won't work for changing/removing Restrictions) but that means no one can use any of the restricted features.
iOS has no concept of multiple users with differing access levels like this. Touch ID stores multiple fingerprints, but they're supposed to be all from the same person, the device's owner, not multiple users.
You're going to have to buy your daughter her own iPhone... ;-)

Looking For Optimal Wireless Settings For Multiple WRT310N's

Folks, I have 3 Linksys WRT310N routers (all at the most current level firmware) around my house serving as both wired and wireless access points. I have Verizon DSL service (3 MB) as my ISP. We have a couple of IBM T60p laptops (w/Win XP Pro), a Lenovo S12 netbook (w/Win 7), and my son also has an Apple iPod Touch all that access our home network via the wireless network provided by the WRT310N's. The WRT310N's all have unique static IP addresses (DHCP disabled - IP addresses being issued by the Verizon DSL modem/router). My current wireless settings are as follows:
Wireless / Basic Wireless Setings:
Wireless Configuration = Manual
Network Mode = Mixed
Network Name (SSID) = (something other than linksys!)
Radio Band = Auto
Wide Channel = Auto
Standard Channel = Auto
SSID Broadcast = Enabled (Need enabled or the Apple iPod Touch will not find the wireless network)
Wireless / Wireless Security:
Security Mode = WPA2 Personal
Encryption = TKIP or AES
Passphrase = (Something really clever here!)
Key Renewal = 3600 seconds
Wireless / Wireless MAC Filter:
Enabled (With all the appropriate MAC addresses permitted)
Wireless / Advanced Wireless Settings:
AP Isolation = Enabled
Frame Burst = Enabled
Authentication Type = Auto (greyed out - can NOT change)
Basic Rate = Default
Transmission Rate = Auto (greyed out - can NOT change)
N Transmission Rate = Auto
CTS Protection Mode = Auto
Beacon Interval = 100
DTIM Interval = 1
Fragmentation Threshold = 2346
RTS Threshold = 2347
My goal is obviously to provide the best performance on all the wireless devices that we have. Since the laptops and netbook have a variety of OS's (and sometimes our neighbor comes over with his Mac laptop) I'd like to keep it flexable for those PC's and the Apple iPod Touch. I've also read that if you have multiple wireless access points you should set them all to different channels. If so, which channels? Or, should they all be on the same channel so one could walk from room to room without losing their wireless connection? Since I have 3 WRT310N's I'm interested in what recommendations there are for performance to keep the laptops and netbook communicating using wireless "N" yet keeping compatible for the Apple iPod Touch on wireless "G". Thank you all in advance for any advice or info.

Hmmmm, for quite some time I've left the SSID the same on all the WRT310N routers. At one time a while back I was told to do this by a Linksys technician. They all are cascaded (LAN-to-LAN via the ethernet ports) off of the 4 ethernet ports on the Verizon DSL modem/router in the similar manner described in the following article:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=96&s...
(Switch) ethernet port 1 on each WRT310N is connected to ports 1 through 3 on the Verizon DSL modem/router. Hence, each WRT310N is acting as an access point (wired and wireless) throughout the house. I do NOT use the 'Internet' port on any of my WRT310N routers. They each have a static (fixed) IP address like 192.16.1.10, 192.168.1.11 and 192.168.1.12. They all reside on the same LAN subnet as my Verizon DSL modem/router which is responsible for issuing DHCP IP addresses for the entire home network. The remaining (switched) ethernet ports 2, 3, and 4 on each WRT310N is left open for local hard-wired devices like printers and multimedia devices (like XBox 360, etc.). So bottom line is that each WRT310N is acting like a 4-port network switch that also has wireless capabilities (like a WAP).
By keeping the SSID the same on all the WRT310N routers I can keep a single wireless profile on each device (i.e... PC's) for my entire house. So I can go and access WRT310N #1 (with let's say with SSID 'ABC') in my living room and later go into my home office room and access WRT310N #2 (with the same SSID - 'ABC') with the same wireless profile. I believe it is the same concept used when someone stays at a hotel and accesses their public wireless network. That way the hotel customers only have to set their SSID to let's say 'HILTON' regardless of which floor or room they are in.
So the part that I'm really focusing on is the wireless performance aspect. My laptops like to operate on 'N' and get pretty good connection speeds (usually receive around 270 Mbps). The Apple iPod Touch (2nd generation) only goes up to 'G' so I believe I need to keep a 'Mixed' Network Mode. The part I'm not so sure about is the Channel Width and whether or not all 3 Linksys routers should be on the same channel (or set to Auto) or if I should manually set the channels and provide some separation between their channels. That's where 'Channel Width' and 'Channel' settings get a bit over my head. Now when I previously had multiple 'G' Linksys routers I contacted Linksys Technical Support and they said to use the same SSID and that I should separate the channels, but that was with their earlier 'G' versions. Now that I have a more recent [N] version and the channel settings can be 'Auto' I'm wondering if the correct settings would still be to again separate the channels or maybe leave it up to the routers to function in 'Auto' mode.
And if I need to set each router up individually what recommended settings should they be? As follows:
WRT310N #1:
Network Mode = Mixed
Channel Width = ?
Channel = ?
WRT310N #2:
Network Mode = Mixed
Channel Width = ?
Channel = ?
WRT310N #3:
Network Mode = Mixed
Channel Width = ?
Channel = ?
Here is a Cisco web page that I'm using as a reference:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=21194
I'm also looking for any suggestions on tuning the Advanced Wireless Settings like Beacon Interval, Fragmentation Threshold, RTS Threshold, etc. Again, my wireless user devices are both G and N and have various OS's.
Thank you again in advance for all your help!!

Apply user layout settings for multiple users

Hi,
Does any of you know how to apply a saved user layout (like Pivot sorting, hidden key figures, etc) to multiple users? It is strange that you can create such saved layouts for eg Alert Monitor, but not for Interactive Planning... I have designed a special layout for my users but cant distribute it centrally now
Thanks in advance,
Best regards,

Hi,
You can't apply user settings of planning book to multiple users at a time.But in transacton /SAPAPO/SDPUSET you can copy these user settings to other users.
Regards,
Sunitha

What are the recommended settings for multiple iPhones and iPads in the same family? I don't want my family members contacts in mine...or them receiving texts that are intended just for me. Help!

I don't want my wife's or children's contact information in my contacts during syncing...or them receiving texts that are intended or me. Can someone please tell me how they handle multiple family members settings in regard to emails, iCloud, and iTunes? Does each phone have a separate computer login, iTunes account or iCloud accounts? Help!

Yes, set them up with their own Apple IDs:
http://appleid.apple.com
An Apple ID may have been entered in the following places:
Settings > iCloud > Account
Settings > Messages > Send & Receive
Settings > FaceTime
Settings > iTunes & App Stores

What re my settings for multiple icloud accounts

My original icloud/apple acct is associated with my iMac & iPhone. Wife has icloud/apple account for her MacBookPro & her iPhone. Want to sync just one combined calendar and one combined address book between all 4 devices. I created a third icloud/apple account for this, but I am not sure of the settings I need to make on the devices so that the information is not lost in the process. What should my settings on my devices be so that I don't lose my calendar & address book info

the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.

IOS Signature Settings for Multiple Email Accounts causes crashes and errors

Hello Everyone,
I've been having troubles with iOS email signature for severals years from iOS 4 (?) through iOS 7 on everything ranging from an iPad2, iPad3, IPad Air, and various iPhones. I'm currently on an iPad Air 128GB WiFi running iOS 7.1.2.
I have about 12 email accounts. I have it set to a unique signature per account. Whenever I try to scroll the list of signatures in the settings app, it will often have greyed out areas where a signature is supposed to be (especially after adding a new account). Other accounts will blur together and overlap each other. Very often the whole settings app crashes. Once the crashes start, they happen more frequently and you basically have to Power Off and Restart the iPad to get it back to a somewhat stable state.
I've come to accept that the Mail Signatures is broken and not stable. But maybe I'm just doing it wrong. So, I ask you great and wonderful Apple Community: Any suggestions? Or just keep on like I've been doing for the last several years?
Thank you!
Paul Holje

this crash has been present since ios6 (apparently). it's apparently caused by a buffer overflow (i've not yet examined the crash files i've been generating) because the engineers never tested use cases such as yours or mine.
a painful workaround is to disable all your email accounts but one, edit its signature, then disable it, and enable the next one, and so on. ios saves the correct signature for each account and the settings app crash does not occur.
hope this helps

Project Settings for Multiple Video Files?

In PRE 8, I am attempting my first HD project. I have several different types of video files that friends sent me from a sports event, the video files are AVCHD (1920?), QT Movie (1280x720), and QT Movie (1920x1088). When I create a new project, what PROJECT SETTINGS should I select? I am not sure what to select since I am using different video file formats. The video files are currently on my hard drive.
I also have lots of pix (jpg) from different cameras, some are as large as 5184x3456. For the picture files, should I bulk process them through PSE to resize them? If so, what should the maximum size be for the HD project?
Thank you in advance.
Howard

Hi Steve - in the list of NTSC project presets, there is not a "DSLR" selection; there is "AVCHD", "DV", "Hard Disk/Flash", and "HDV". Am I missing something?
As you suggested, I used the "AVCHD 1920x1080" preset for the Vixia files. I imported one 9-second file in the project as a test and the video is choppy after rendering. I have a new HP computer with an I7-930 quad-core processor, 8GB RAM, and an ATI HD 5770 graphics card so I think there is enough cycles to process the video files. Any suggestions?
Thank you very much for answering my questions on a Sunday.
Howard

Httpd.conf settings for multiple vhosts

Similar Messages

Maybe you are looking for