HttpRequest POST and PUT not working?

Hello:
To send data to server I am trying to use POST or PUT command but
just can't get them to work.
The GET command makes connection to server but not the POST and PUT.
Tried using onOutput for method GET to send data but data is not transferred if method is GET
Has anyone successfully using POST command or experiencing similar behavior? Thanks.

Could you post a code example? POST should be working.

Similar Messages

  • Get and Put not working in Fireworks

    The file transfer commands in Fireworks are active, since the
    sites have been defined in Dreamweaver, and they look like they
    work (the proper screens seem to pop up, but only for a second,
    even on large files), but I don't see any logs and the files are
    not actually transfered. I have to go through Dreamweavers file
    panel to transfer them. Any ideas?
    Thanks,
    Chris

    Check to make sure that PNG files aren't cloaked in DW. That
    might be
    causing the problem.
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    Extending Knowledge, Daily
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    news://forums.macromedia.com/macromedia.fireworks
    news://forums.macromedia.com/macromedia.dreamweaver
    [email protected] wrote:
    > I had to ask the system administrator about the SFTP or
    third-party systems,
    > and he said no. . . I was kind of hoping that was it.
    >
    > All the rest of what you mentioned had been done. The
    file transfer buttons
    > were and are active. If I do a transfer in Dreamweaver,
    it works just fine. But
    > when I open the same file in fireworks, then try a Put,
    the file transfer
    > screens just fly by, and no file is transfered.
    >
    > I was able to trap a screen. One says "Failed to delete
    file
    > product_template_NNW2.png.LCK" - this seems to happen
    when I create a file
    > locally and there isn't a corresponding file already
    existing on the remote
    > server.
    >
    > When the file does exist on the remote server, I get the
    message
    > '"product_template_3.png" is newer on the remote server.
    Do you wish to
    > overwrite it?' - but when I press Yes, again the dialog
    box pops up very
    > quickly and dissapears, and again, no file is actually
    transfered.
    >
    > Should I open a Tech Case with Adobe?
    >
    >
    >

  • Web Gallery Post and Delete Not Working

    Before the latest update things seemed to work as expected. After the update my web gallery doesn't work as expected. From imovie 08 I can't successfully delete movies nor can I successfully load them.
    Anyone else with the same issues. Apple has really dropped the ball on "works out of the box" or in my case, out of the credit card.
    No more money will go to them till they clean up their act.

    got help via e-mail from .mac team

  • I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

    I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • My Keyboard and touch-pad will work during post, but will not work after the os loads?

    I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • IPHONE 6 This cable or accessory is not certified and may not work reliably

    I have the IPhone 6.  Bought it last Saturday,Just updated it to the newest 8.0.2 software Friday Sept 26th. No Problems until today, Monday Sept. 29th when Im getting this error .
    It started this afternoon and, no i did not and do not have it plugged in. It was charged this morning and was at 57% battery this afternoon when the problem started.
    Now I get this messege that keeps poping up over and over "This cable or accessory is not certified and may not work reliably with this iphone"
    It keeps popping up and i dont have ANYTHING plugged into it.
    I called Verizon because thats who i bought it from who put me thru second line for help.
    After a bunch of BS and telling me that they have had problems with chargers because of the amplified voltage and wrong plug being sent out  which sounds like bull to me because he said the new iphones have a different head on the plug, not the phone side but the end that has the usb connection and goes to the ac outlet, which dont make a lot of sense when you can also plug them into a usb port. I looked at different iphone plugs from the 4s, the 5 and the 6,and they all show the same input and output voltages and amps. Basically nothing that has to do with my problem i am having
    Anyway at this point now they are saying something may have happened with the new software when i  download it last friday.
    So now they had me backup my phone to itunes, and restore the iphone from itunes.
    When you do this, itunes will automatically download the new version software, which seems to be taking a long time to download.
    I will try to post results later to see if this works......

    I am having the exact same problem you are, straight out of the box.  Got an iphone6+ this morning and five minutes after I turned it on, it started coming up with the same error as you.
    The phone was on ios 8 (not 8.02).  I did the upgrade to 8.02 but it still comes up.  I'd be very surprised if this is a software problem. I didn't even get to charge it or plug anything in !! Started doing it straight away.
    The error comes up even when I have NOTHING plugged it to the phone.
    I am very annoyed!!!
    If possible could you please let us know what the Apple Tech people say.
    thx
    David

  • Wireless network and bluetooth not working on touchsmart 600

    This has not worked since day 1 and I have been using wired internet.
    I really need to setup a home network and need to use wireless.
    Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
    Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
    Please advise  

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

    My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Why does drag and drop not work?

    Why does drag and drop not work?

    Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
    If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
    If not - please describe exactly what the problem is.

  • Pageup and pagedown not working in firefox

    pageup and pagedown not working in firefox. I read in other posts to install the latest graphics driver and I did. I also uninstalled flashplayer and downloaded and installed the latest version.

    Hello yukhateeee try to hitting the F7 key in keyboard and check it again.
    also you can '''UNCHECK Always use the cursor keys to navigate within pages''', go from '''Firefox button''' > '''Options''' > '''Options''' > '''Advanced''' > '''General''' tab > '''Accessibility '''session > A'''lways use the cursor keys to navigate within pages [ ]'''.
    thank you

  • Webcam and bluetooth not working in my G570 on Win7 ultimate

    Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

    hey Nambiar,
    uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
    once done, see if you're able to use it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Paid subscription, but all products still in trial mode and does not work!

    Hello!
    I paid subscription, but all products still in trial mode and does not work! In Adobe ID manage page i don't see my subscription Screenshot “Adobe ID”
    I received an email confirmation of my payment subscription. Order number 12984126025, my adobe id
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    Why so?! This is very important! My current project at risk, I can lose money

    Please try the below mentioned steps
    1) Sign out of the Creative Cloud app
    2) delete the opm.db file*
    3) update to the latest version of the Creative Cloud app.
    *On Windows 7, the opm.db file is located here:
    C:\Users\YourUserName\AppData\Local\Adobe\OOBE
    *On a Mac, go here:
    [Userdir]:Library:Application Support:Adobe
    ~Deepak

  • DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

    Hi Expert,
    I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working. 
    I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
    Wish to hear goods news ASAP .
    Thank you.
    Joan.

    Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
    Value Date code in the above abap
            IF PAR_VALD = 'X'.
              MOVE C2-VALDT TO HLP_VALDT.  "  VALUE DATE
             write hlp_valdt to umsatz-budat dd/mm/yy.
            ELSE.
              MOVE C8-BALDT TO HLP_BALDT.
              MOVE HLP_BALDT TO HLP_VALDT.
            write hlp_valdt to umsatz-budat dd/mm/yy.
            ENDIF.
               MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
               MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
               MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
    Regards
    Anurag
    Message was edited by: Anurag Bankley

  • Drag and Drop not working since last software update

    Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving  an icon on the doc and the same thing occured.  YOu can drag but the items will not drop.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Keyboard and mouse not working

    both keyboard and mouse not working. I have changed batteries and checked drivers  please help..  thank you
    This question was solved.
    View Solution.

    Thanks for the information, that is exactly what I needed.
    If you are having the enter issue when using the wired KB from your old computer that sounds software related with the blog site.
    What web browser do you use when on that website?
    Connect your wireless equipment back and if you continue to have the issue with the letters repeating then you should inquire about a replacement for what is referred to as "sticky keys".  With it being a new unit this shouldn't be an issue.
    Let me know if you have other questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • Help with home network.

    Not sure if this is the proper forum for this question, just point me in the right direction if I'm wrong. I am a new student in networking, taking the CCNA courses, and now want to rewire my home.  I currently have a cable modem and E2500 setup runn

  • CS6 Bridge Cache Slow to Build

    I have had a lot of problems with Bridge CS6 thumbnail generation from day one.  THe latest updates have not changed anything. I use embedded thumbnails, do not generate 100% previews, nor have box checked to keep them. In building thumbnails the fir

  • Where is the Java icon

    Hello, once upon the time - it was at Java 1.4 - the Java icon for windows could be found in the subdirectory \jre\javaws\JavaCup.ico. Where can that - or a similar - Java icon be found in Java 5 and 6 installations (or elsewhere)? Thomas Wiedmann

  • Windows vista and microsoft office

    I have never been able to use any microsoft office products since I've had my pc.  Wasn't that important as I had a pc from work I could use.  I no longer do.  I have never been able to find theproduct code that supposedly came with my pc so I could

  • Can I give someone a specific book thru iBooks

    Nephew is now reading everything on iBooks. I want to give him a specific book (not a free-choice gift card). Is there a way to do this?