HTTPS access and device id[PIN]

I am not able to extract the Device-ID from HTTP header.I am accessing my https corporate site.when I try with HTTP ,i get the Device-id.But when I try accessing HTTPS I am not able to.I need this Device Id for further authentication of a blackberry user.
Please help me out in this.......

To find your PIN:
Go to Options
Go to Status
4th line down you should see your PIN:

Similar Messages

  • Where is HTTP access and error log when using Embedded PL/SQL Gateway?

    Hello,
    I am using Embedded PL/SQL Gateway to run stored procedures.
    I can't find access log and error log (something like Oracle HTTP Server has).
    In listener.log are only simple data and there are no usernames and procedure names...
    Thanks.
    Marian

    You might be better off asking this on the Apex forum: Oracle Application Express (APEX)

  • Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

    Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
    on the 32 bit machines I was able to apply this hotfix
    http://support2.microsoft.com/kb/2738898
    But it will not install on 64 bit machines. 
    Is there a hotfix for 64 bit?  If not, what is the work around?
    Thanks!
    Robert

    Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • I had an iPod touch, but it was stolen or lost. Now that I have a new one with a new Apple ID, is there someway I can access and download all my old photos and data from my old Apple ID to my new device? I still remember my old Apple ID and password.

    I had an iPod touch, but it was stolen or lost. Now that I have a new one with a new Apple ID, is there someway I can access and download all my old photos and data from my old Apple ID to my new device? I still remember my old Apple ID and password.

    Restopre from backup
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    Also,
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

    I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

    I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
    In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
    Ross Hunter

  • Ftp and http access over XDB repository is not allowed...

    When I try to execute the following command on a reasonably fresh Oracle 11 installation:
    insert into "XMLTEST" ( "name", "xmlfof" ) values ( 'small', DBMS_XDB.GETCONTENTXMLTYPE('/public/small.xml') );
    -- The schema is correctly registered, the file "small.xml" is in the /public repository folder, the user has every conceivable role and priviledge
    -- http access works fine from a remote location, tried to execute the command on the server and from remote system...
    I get the following error message:
    ORA-31020: Der Vorgang ist nicht zulässig, Ursache: For security reasons, ftp and http access over XDB repository is not allowed on server side ORA-06512: in "XDB.DBMS_XDB", Zeile 1915
    Searching for an answer on the forum didn't produce any concreate explanation... Does anyone have any idea how to solve this problem?

    As it turns out, the XML file contained a reference to a DTD at an external web-site, which caused the problem - it was identical to that described here:
    Re: ORA-31020 when using XML with external DTD or entities
    After removing the reference, everything works perfectly...

  • I have "hidden" my devices/USB access and now cannot figure out how to get them back on so I can re-access the USB files.  How do I do this?  (Is it just me, or should this be a reasonably simple task that shoul NOT require a post to the Apple community?)

    Under "Devices," I have "hidden" my USB access and now cannot figure out how to re-access or "show" USB access again.  Very frustrated right now--this is a high-use feature for me and it should NOT be so buried somewhere that I cannot find it.  So much for Mac's "intuitive" interface.

    Well, you have also "hidden" what version of OS X you are using from anyone who might want to help you.
    You are probably using a newer version than I am, but I don't know that these things have changed.
    In the Finder, from the Finder menu > Preferences …, there should be a Sidebar pane to choose what is visible.
    Also in the Finder, Go menu > Computer (or type Shift Command C) will open a Finder window with any attached volumes showing.

  • Separate Tomcat http and https access

    Hi
    I got tomcat running both http and https.
    However, http://localhost:8080 and https://localhost:8433 are accessing the same page.
    I need to separate them, to prevent from entering data using http://localhost:8080 by mistake.
    Please help.
    Cheer
    T

    there are 2 ways to only allow https access to your webapp
    1:
    stop tomcat listening on all ports except https port
    2:
    configure your webapp to only allow https access
    http://marc.theaimsgroup.com/?l=tomcat-user&m=104951559722619&w=2

  • My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone".  I have turned  off phone unplugged sony and did the pin reset on bottom.     Help please I need my tunes

    My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone".  I have turned  off phone unplugged sony and did the pin reset on bottom.     Help please I need my tunes

    Try plugging it up to your computer and launching iTunes and either resetting it to factory settings or resetting to last sync. Hopefully it just noticing it's plugged up to iTunes will fix it. This happened to my friend once and all she had to do was plug it into her computer and that fixed it.

  • I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

    Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

    I was searching for how to setup the 903+ and my W520 and came to this thread.
    1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
    but if you are going to go BT headset....
    2.  What I did for the 903+
    Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
    Required reboot.
    Activated the Bluetooth with FN + F5 menu.
    Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
    Ran the updated Bluetooth driver install.
    Rebooted for good measure.
    Double-clicked the Bluetooth Tray icon.
    Clicked Add A Device.
    Turned off my 903+ and continued to hold down the power to enable pairing mode.
    Showed up in devices and added it.
    Worked for audio. There are probably additional options for enabling the mic.
    Hope that helps whoever might find this thread.

  • HTTP errors and/or access denied messages preventing me from downloading CS5.5

    How can I download my copy of CS5.5 Design Standard? I keep getting HTTP errors and/or access denied messages.

    Alex5555 where are you downloading the installation files from?  Have you tried utilizing a different web browser?  Is your web browser configured to accept cookies?

  • OSX 10.6.7 gets confused on access and connection rights after updateing device or program

    Hello
    On all our 4 Mac, all with Snow Leopard 10.6.7, I have an issue with storing access and network connection rights after updating programs and devices.
    We have a Canon network printer. Everything worked fine, the necessary programs had the rights to accept incoming network connections. But then I reinstalled the printer on two Macs because of the PDF fonts problem with 10.6.7. But now, the system asks for every single document if incomming connection should be allowed, even if the according program is listed in the firewall as "allow". Deleting the program from the list in the firewall and add it newly did not help.
    The same issue occures now with a selfwritten Applescript program. It access a key in the keychain. I told the system to allow access always, that worked in the beginning, but after updating the program, it does not store the program as allowed any more. I cannot even add it manually to the allowed list for the specific key. Means, I can select the program after clicking the plus, but the program simply not shows up in the list.
    This happened on two Macs up to now, one is the same as the printer problem, but the other does not have the printer problem (up to now).
    What to I have to do, that the program stores the given rights newly, also after updating a device or program?
    Other people have the same problem as you can see here.

    reFX guys were very helpful and took remote connection to my desktop. It was 5 minutes and Nexus2 was up and running.
    The thing was that my hard drive is case sensitive. They just renamed the file white_3_nsk to lower case in
    /Library/Audio/Plug-Ins/Components/Nexus.component/Contents/Resources/. After that, everything is working.
    Hopefully this helps someone in the future who has put fortune to Nexus2 and gets heart attack when it doesn't work.
    Regards,
    Hannu

  • I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..anybody can help?

    I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..Can somebody help?

    Hi Maastricht2014,
    Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
    The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
    Hope that Helps!
    ~ Arpit

  • I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

Maybe you are looking for