Https access to Sap Content Server 620 with R/3 46C
We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
= using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
= provides this ordered list of 9 ciphersuites:
= 1. SSL_RSA_WITH_RC4_128_SHA
= 2. SSL_RSA_WITH_RC4_128_MD5
= 3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
= 4. SSL_RSA_WITH_DES_CBC_SHA
= 5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
= 6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
= 7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
= 8. SSL_RSA_WITH_NULL_SHA
= 9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c 774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c 777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
Regards
Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.
Similar Messages
-
Monitoring Web Dispatcher, SAP Content Server, apache with SM 7.1
Hello,
Did anyone of you come across monitoring possibilities of SAP WD, Content Server or an apache via SM 7.1 SP04? I want to integrate monitoring of these components to technical monitoring in new SM, but didn't find much about it so far.
Thank you very much for help.Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau. -
SAP Content Server error 405 Method Not Allowed
Hello Everyone
We have installed SAP Content server 04s with SAP DB 7.6 build on Solaris platform. We are trying to connect it through ECC. We have configured Apache web server on content server, and we are able to access it through http url.
On ECC we have defined repository OAC0 and when we click on CSADMIN to create repository its giving us u201C405 Method Not Allowedu201D allowed error. Even we tried to test this configuration with Report RSHTTP60 this is also giving us 405 errors.
We have tried lots of things to resolve this error but we didnu2019t get any fine solution, does any one come across to such kind of error while configuring Content server with R/3 or ECC?
We will appreciate any help asap,
Thanking you and waiting for reply,
Warm Regards
SharmishthaDear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B -
WebDAV Access: SAP Content Server
Hello everyone,
I would like to use SAP Content Server to store the courses created in LSO Authoring Environment. (Client wants it this way...i have no clue why). Now in order to use SAP Content Server here, the content server must support WebDAV access. So does the content server support WebDAV, if yes -- how to enable it and how to browse it.
Thanks,
GLMIf the documents are stored in DMS with Content Server as the repository, you should be able to access them using the DMS connector to KM. This is a business package which, when installed, exposes document stored in DMS to KM as a KM repository. Then you can browse it like any other KM repository. There are a lot of posts in this forum and others about the DMS connector.
You can also try to enable WebDAV if you Content Server is using a MaxDB database.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/068edfba705415e10000000a114cbd/frameset.htm
Andrew -
SAP Content Server HTTP Interface ignores secKey
Hello.
I try to implement an own Content Server with the help of this url: http://help.sap.com/saphelp_nw04/helpdata/DE/f5/9561f5f3b111d1955b0000e82deb58/frameset.htm
The problem is, if try to test these functions on the SAP CS, secKey will always be ignored. The parameters 'docProt', 'security' and 'Protection' are set to on.
The function 'putCert ' also does not work and always show the error 'security.cpp(615): SsfVerfiyError 12'.
Thanks for the help.
Best Regards
RenéHi Alexander,
SAP KM always has to access on the architecture level where the document object model is defined. There is no generic repository manager (the connectory from KM to xy) for ArchiveLink or SAP Content Server.
Repository managers access e.g. on the level of mySAp PLM DMS for which one of these connectors is available.
Regards,
Karsten -
Sap Content server Direct Browser Access - docGet
We use SAP Content Server for DMS doc storage. Docs are stored without digital signing.
I am looking to access dms original files directly via web browser using the "docGet" command.
My url looks as shown:
http://pswdf009:1080/ContentServer/ContentServer.dll?docGet&pVersion=0045&contRep=K1&docId=361A524A3ECB5459E0000800099245EC
When I call the url, browser does not seem to be able to read the file type of the server response. An "open/save" dialog appears and when "open" is selected a subsequent dialog appears asking which application to use to open the file. Once the correct application is chosen, the document is displayed correctly.
Is there some way to instruct the browser the content-type is application/pdf?
Will CSAdmin parameter changes have any impact?
The browser is Internet Explorer 6.
Any help is appreciated.
RogerHi Roger,
you may of course find an answer here.
But mySAP PLM DMS is not a focus topic here (besides maybe connecting it into the SAP Portal and KM). Thus, you may be better off using a contact or a message to PLM.
Regards, Karsten -
SAP content server file access
Hi
I stored the word document file using DMS attachment in SAP content server.
and i fetched http url Path from content server.
http://xx.xxx.xx.16:1111/ContentServer/ContentServer.dll?docGet&pVersion=0046&contRep=ZDMS_CT_CT&docId=E033F8EA0FEF7BF1B53D0024E83A1B0D&accessMode=r&authId=CN%3DMJE,OU%3DI0020304274,OU%3DSAPWebAS,O%3DSAPTrustCommunity,C%3DDE&expiration=20110209090450&secK
But i cannot open the file in browser. why?
how to see the file?
Regards
ChandraHi chandarakumar,
share with solution it will helpful to all....
Regards,
chandu. -
Integrate DMS / SAP Content Server 6.40 with EP
Hello ,
With reference to [DMS Installation |DMS Installation; integrate DMS / SAP Content Server 6.40 with EP to access EP PCD .
Regards ,
SantoshYou can integrate the portal with DMS/CMS by using the DMS connector or DMS repository manager. The DMS repository manager can be dowloaded from sap service marketplace
See threads for more information
DMS Integration in EP
Content Server 6.3 integrate with Portal 6.0 possible?
Points are welcome if it is useful
Koti Reddy -
Netweaver 6.50 HTTP SAP Content Server Version
Hello.
I need information about the version of Http SAP Content Server in Netweaver 6.50. I have been browsing the SAP portal and I can not find any information.
I have a client application that uses the content server that comes with Netweaver 6.40 and I need to know if it will be compatible with the content manager of Netweaver 6.50.
¿Is it the same version as the Http SAP Content Server of Netweaver 6.40? ¿Where can i find more information about it? ¿ Netweaver 6.50 is the same as Netweaver 2004 ?
Any help will be appreciated.
Thank you in advance.
CarlosHi Carlos,
I think this must be a confusion, As far as i know version 6.50 does not exist, Netweaver goes up to version 6.40 and then jump to 7.00
¿Netweaver 6.50 is the same as Netweaver 2004?
No, Netweaver 2004 goes up to 6.40
Hope this help!
Juan
Please reward with points if helpful -
How to Access data from SAP Content Server through SAP Portal
Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
AhmadIf your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew -
Http error 405 method not allowed sap content server windows
Hi Expert,
we have install sap content server 6.5 on microsoft windows 2012 using
IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
create repository error "http error 405 method not allowed"
Oac0 --> tab Create --> Content rep.
I have implement note number 1704365 - IIS roles not created by
default when installing Content Server on Windows 2008. even though it
is not applicable to our IIS.
when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
it always direct us to download file not showing the version number.
is there any solution for this issue?
Thanks a lot,Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B -
Creating documents with SCMS_DOC_URL_CREATE in SAP Content Server
Hi there,
I have a Problem here with the Knowledge Provider concerning SCMS_DOC_URL_CREATE and hope anyone could help me out.
For a SAP Records Management document I am calling BAPI_SRM_DOC_CREATE and get a LOIO and a PHIO ID for my new document. The PHIO-ID I pass to SCMS_DOC_URL_CREATE which then creates the URL to put the file on a SAP Content Server with a 3rd party tool. That works totally fine and I can see the file on the Content Server with its metadata,
Unfortunately SAP Records Management doesn't recognize that a file has been uploaded. When I open the file in the transaction ORGANIZER it has no content and no components.
Is there any function call I am missing to tell the Records Management document that I have uploaded something?
All is working fine when I get the uploaded content into NetWeaver with SCMS_GET... and call BAPI_SRM_CHECKIN_DOCUMENT. But of course this is not what I want (transferring the file directly in the local network area where the content server stands, then getting it back to NetWeaver and back again to the content server).
Any help would really be appreciated.
Thank you
MarcusAnswer: because SCMS_DOC_URL_CREATE is not remote enabled by default.
-
Sap content server - error sending certificate - HTTPIO_PLG_NO_MPI_INIT
Hello all,
we have installed the SAP content server and created a new repository which has the status running.
Now when we go to OAC0 and the send certificate button, we get an error message:
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 HTTPIO_PLG_NO_MPI_INIT
Message no. CMS166
Why can I not send the certificate?
Thanks
AnneWhat i mean is you need a user that has both local machine administration rights and local domain administration rights. This is due to the fact that it installs some web components that require domain admin. If you don't install with this, its likely you will be able to test connection fine but receive errors when trying to send the certificate. This issue cannot be resolved after the installation. i.e. if you install with the incorrect admin rights and then adjust these afterwards, it will still not work, and the only solution is to reinstall with the correct rights.
-
Hello colleagues,
I have this error when start the Content Server,
host:(/directory/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /directory/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into
server: /directory/apache/modules/mod_sapcs22.so: undefined symbol: ap_log_error
Can you help me?
ThanksHi Reagan,
Execute the first parameter,
rgqaserp:(/sapcontreps/apache/modules)(root)#cat /sapcontreps/apache/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/sapcontreps/apache"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 1090
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule sapcs_module modules/mod_sapcs22.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/sapcontreps/apache/htdocs"
<Directory "/sapcontreps/apache/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "logs/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/sapcontreps/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/sapcontreps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/sapcontreps/apache/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /sapcontreps/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
</IfModule>
Second parameter,
rgdeverp:(/sapcontreps/apache/modules)(root)#ls -la /sapcontreps/apache/modules
total 5544
drwxrwxrwx 2 sapcs sapsys 4096 Jun 12 15:46 .
drwxrwxrwx 15 sapcs sapsys 4096 Jun 12 14:56 ..
-rwxrwxrwx 1 sapcs sapsys 13836 Jun 12 14:54 httpd.exp
lrwxrwxrwx 1 sapcs sapsys 34 Jun 12 15:46 libsapsecu.so -> /sapcontreps/modules/libsapsecu.so
-rwxrwxrwx 1 sapcs sapsys 34756 Jun 12 14:56 mod_access_compat.so
-rwxrwxrwx 1 sapcs sapsys 31861 Jun 12 14:56 mod_actions.so
-rwxrwxrwx 1 sapcs sapsys 44418 Jun 12 14:56 mod_alias.so
-rwxrwxrwx 1 sapcs sapsys 30426 Jun 12 14:56 mod_allowmethods.so
-rwxrwxrwx 1 sapcs sapsys 41605 Jun 12 14:56 mod_auth_basic.so
-rwxrwxrwx 1 sapcs sapsys 84126 Jun 12 14:56 mod_auth_digest.so
-rwxrwxrwx 1 sapcs sapsys 68399 Jun 12 14:56 mod_auth_form.so
-rwxrwxrwx 1 sapcs sapsys 30531 Jun 12 14:56 mod_authn_anon.so
-rwxrwxrwx 1 sapcs sapsys 36079 Jun 12 14:56 mod_authn_core.so
-rwxrwxrwx 1 sapcs sapsys 40100 Jun 12 14:56 mod_authn_dbd.so
-rwxrwxrwx 1 sapcs sapsys 32532 Jun 12 14:56 mod_authn_dbm.so
-rwxrwxrwx 1 sapcs sapsys 32359 Jun 12 14:56 mod_authn_file.so
-rwxrwxrwx 1 sapcs sapsys 49757 Jun 12 14:56 mod_authn_socache.so
-rwxrwxrwx 1 sapcs sapsys 61854 Jun 12 14:56 mod_authz_core.so
-rwxrwxrwx 1 sapcs sapsys 42581 Jun 12 14:56 mod_authz_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35071 Jun 12 14:56 mod_authz_dbm.so
-rwxrwxrwx 1 sapcs sapsys 34704 Jun 12 14:56 mod_authz_groupfile.so
-rwxrwxrwx 1 sapcs sapsys 35256 Jun 12 14:56 mod_authz_host.so
-rwxrwxrwx 1 sapcs sapsys 30435 Jun 12 14:56 mod_authz_owner.so
-rwxrwxrwx 1 sapcs sapsys 30802 Jun 12 14:56 mod_authz_user.so
-rwxrwxrwx 1 sapcs sapsys 105072 Jun 12 14:56 mod_autoindex.so
-rwxrwxrwx 1 sapcs sapsys 34253 Jun 12 14:56 mod_buffer.so
-rwxrwxrwx 1 sapcs sapsys 192292 Jun 12 14:56 mod_cache.so
-rwxrwxrwx 1 sapcs sapsys 84567 Jun 12 14:56 mod_cache_disk.so
-rwxrwxrwx 1 sapcs sapsys 88616 Jun 12 14:56 mod_cache_socache.so
-rwxrwxrwx 1 sapcs sapsys 98717 Jun 12 14:56 mod_cgid.so
-rwxrwxrwx 1 sapcs sapsys 354271 Jun 12 14:56 mod_dav.so
-rwxrwxrwx 1 sapcs sapsys 189761 Jun 12 14:56 mod_dav_fs.so
-rwxrwxrwx 1 sapcs sapsys 59275 Jun 12 14:56 mod_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35504 Jun 12 14:56 mod_dir.so
-rwxrwxrwx 1 sapcs sapsys 33559 Jun 12 14:56 mod_dumpio.so
-rwxrwxrwx 1 sapcs sapsys 31544 Jun 12 14:56 mod_env.so
-rwxrwxrwx 1 sapcs sapsys 40037 Jun 12 14:56 mod_expires.so
-rwxrwxrwx 1 sapcs sapsys 63988 Jun 12 14:56 mod_ext_filter.so
-rwxrwxrwx 1 sapcs sapsys 39211 Jun 12 14:56 mod_file_cache.so
-rwxrwxrwx 1 sapcs sapsys 52811 Jun 12 14:56 mod_filter.so
-rwxrwxrwx 1 sapcs sapsys 60936 Jun 12 14:56 mod_headers.so
-rwxrwxrwx 1 sapcs sapsys 158790 Jun 12 14:56 mod_include.so
-rwxrwxrwx 1 sapcs sapsys 66838 Jun 12 14:56 mod_info.so
-rwxrwxrwx 1 sapcs sapsys 36196 Jun 12 14:56 mod_lbmethod_bybusyness.so
-rwxrwxrwx 1 sapcs sapsys 36188 Jun 12 14:56 mod_lbmethod_byrequests.so
-rwxrwxrwx 1 sapcs sapsys 36192 Jun 12 14:56 mod_lbmethod_bytraffic.so
-rwxrwxrwx 1 sapcs sapsys 48496 Jun 12 14:56 mod_lbmethod_heartbeat.so
-rwxrwxrwx 1 sapcs sapsys 86665 Jun 12 14:56 mod_log_config.so
-rwxrwxrwx 1 sapcs sapsys 40163 Jun 12 14:56 mod_log_debug.so
-rwxrwxrwx 1 sapcs sapsys 31797 Jun 12 14:56 mod_logio.so
-rwxrwxrwx 1 sapcs sapsys 48254 Jun 12 14:56 mod_macro.so
-rwxrwxrwx 1 sapcs sapsys 54195 Jun 12 14:56 mod_mime.so
-rwxrwxrwx 1 sapcs sapsys 106526 Jun 12 14:56 mod_negotiation.so
-rwxrwxrwx 1 sapcs sapsys 291551 Jun 12 14:56 mod_proxy.so
-rwxrwxrwx 1 sapcs sapsys 171766 Jun 12 14:56 mod_proxy_ajp.so
-rwxrwxrwx 1 sapcs sapsys 108144 Jun 12 14:56 mod_proxy_balancer.so
-rwxrwxrwx 1 sapcs sapsys 54249 Jun 12 14:56 mod_proxy_connect.so
-rwxrwxrwx 1 sapcs sapsys 38536 Jun 12 14:56 mod_proxy_express.so
-rwxrwxrwx 1 sapcs sapsys 61607 Jun 12 14:56 mod_proxy_fcgi.so
-rwxrwxrwx 1 sapcs sapsys 112538 Jun 12 14:56 mod_proxy_ftp.so
-rwxrwxrwx 1 sapcs sapsys 114424 Jun 12 14:56 mod_proxy_http.so
-rwxrwxrwx 1 sapcs sapsys 56400 Jun 12 14:56 mod_proxy_scgi.so
-rwxrwxrwx 1 sapcs sapsys 55514 Jun 12 14:56 mod_proxy_wstunnel.so
-rwxrwxrwx 1 sapcs sapsys 32760 Jun 12 14:56 mod_ratelimit.so
-rwxrwxrwx 1 sapcs sapsys 40376 Jun 12 14:56 mod_remoteip.so
-rwxrwxrwx 1 sapcs sapsys 45091 Jun 12 14:56 mod_reqtimeout.so
-rwxrwxrwx 1 sapcs sapsys 37224 Jun 12 14:56 mod_request.so
-rwxrwxrwx 1 sapcs sapsys 171049 Jun 12 14:56 mod_rewrite.so
lrwxrwxrwx 1 sapcs sapsys 35 Jun 12 15:46 mod_sapcs22.so -> /sapcontreps/modules/mod_sapcs22.so
-rwxrwxrwx 1 sapcs sapsys 119242 Jun 12 14:56 mod_sed.so
-rwxrwxrwx 1 sapcs sapsys 57944 Jun 12 14:56 mod_session.so
-rwxrwxrwx 1 sapcs sapsys 32806 Jun 12 14:56 mod_session_cookie.so
-rwxrwxrwx 1 sapcs sapsys 47023 Jun 12 14:56 mod_session_dbd.so
-rwxrwxrwx 1 sapcs sapsys 44102 Jun 12 14:56 mod_setenvif.so
-rwxrwxrwx 1 sapcs sapsys 53976 Jun 12 14:56 mod_slotmem_shm.so
-rwxrwxrwx 1 sapcs sapsys 45214 Jun 12 14:56 mod_socache_dbm.so
-rwxrwxrwx 1 sapcs sapsys 35686 Jun 12 14:56 mod_socache_memcache.so
-rwxrwxrwx 1 sapcs sapsys 68519 Jun 12 14:56 mod_socache_shmcb.so
-rwxrwxrwx 1 sapcs sapsys 39669 Jun 12 14:56 mod_speling.so
-rwxrwxrwx 1 sapcs sapsys 63924 Jun 12 14:56 mod_status.so
-rwxrwxrwx 1 sapcs sapsys 43320 Jun 12 14:56 mod_substitute.so
-rwxrwxrwx 1 sapcs sapsys 33237 Jun 12 14:56 mod_unique_id.so
-rwxrwxrwx 1 sapcs sapsys 33466 Jun 12 14:56 mod_unixd.so
-rwxrwxrwx 1 sapcs sapsys 33615 Jun 12 14:56 mod_userdir.so
-rwxrwxrwx 1 sapcs sapsys 25961 Jun 12 14:56 mod_version.so
-rwxrwxrwx 1 sapcs sapsys 37707 Jun 12 14:56 mod_vhost_alias.so
But when stop or stat I have the error,
rgqaserp:(/sapcontreps/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /sapcontreps/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into server: /sapcontreps/apache/modules/mod_sapcs22.so: ELF file data encoding not little-endian
Can you help me?
Thanks -
Error while starting SAP Content server
Hi Experts,
I have installed content server, and from OAC0 i have imported certificate. The status is showing running. In details tab, when i enter on start button, I am getting below error.
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Can any one suggest possible solution?
Regards
AdityaHi Aditya
Could you refer the SAP Notes
1764842 - Connection problem to SAP Content Server
582765 - SAP Content Server cannot address database
Br
SS
Maybe you are looking for
-
Photoshop CC has stopped working when launching
Hello So I just signed up to adobe CC, and installed Photoshop. I signed upto the £8.75 a month deal that was on the homepage. My problem is everytime I go to launch photoshop either in 64bit or normal I keep getting the error message " Photoshop ha
-
Transaction code for bill release
hi all, help me in finding of the transaction code for bill release thanks..
-
I am NOT able to sign into iCloud on my computer?
icloud came with Windows 8 on my new computer. I have an iTunes account but I currently do not have any Apple products such as an iPad, iPod,Etc my phone is a samsung galaxy s4. I am NOT able to sign into iCloud on my computer? Well I'm not be able t
-
Help needed reading xml attributes
I have a method that is reading through my XML doc and pulling out all of the elements. I want to get it to pull out the href attribute from within AdvertText but can't figure out how to do it within my method. Any help would be greatly appreciated!
-
Mail notifications turning off after re-start
Hi all, I have an iPhone 4s running iOS 7.1.1. I have my mail notifications turned on in the lock screen as alerts and to be shown in the notification centre, but after re-starting my phone, they turn off. After a re-start, both the 'show in notifica