HTTPS changed to HTTP

Hi all,
My https request is automatically converted to http.
For authentication purpose I am hitting one external server.
On that time the https is changed to http.
(I enabled ssl properties in server.xml)
Thanks.

Did you do a Tools upgrade to 8.52? (I presume so from " then started our PT 8.52 upg")
If you did, you would've re-deployed or re-installed the PIA
After this, did you make the required configuration changes in Webprofile?
Is the 'Virtual Addressing' tab correctly configured in your webprofile? There is a Reverse Proxy Server section which defines which protocol (http or https) to be used etc
Not sure if this is related to the 64 bit oracle client. I don't think so.
Hope this helps.

Similar Messages

How do I disable the "Security Warning" - encrpted script message when I log in to a website using https ? If I cannot get the website owner to change it's code

''dupe of https://support.mozilla.org/en-US/questions/1027400 - locking''
Whenever I log onto a website via https, I get this message and am unable to have Firefox save my password for the website.
Another user asked this question and it was answered, however, the user was asking in the context of his own website where he was able to change the code.
I am unable to change the code for this website but would like to disable this message and have Firefox remember my password for the user id I type in.
Whenever I log onto a website via https (including my website), I get this message:
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. Are you sure you want to continue sending this information? This is followed below with two boxes, "continue" and "cancel".
In order to connect with the website, I must click on "continue" each time I log onto the website. HOW do I permanently DISABLE this message?
Chosen solution
Firefox gives that error because the page is on HTTPS but your form action is HTTP:
<form action="http://eclipse69forum.com/index.php?app=core&module=global&section=login&do=process" method="post" id="login">
Can you change that to HTTPS?

There is a disconnect here: if the form is being submitted securely, then you would not get that message. So although you may be looking at an HTTPS address in the address bar, Firefox is warning you that your username and password are going to an HTTP address and being transmitted in the clear rather than being protected.
That's definitely not the normal way to set up a login page. Do you want to give the URL of the problem login page to get specific comments? Without knowing more, it sounds as though it isn't designed for secure logins and you may be wasting your time accessing their login form using HTTPS.
Anyway, to answer your question, I don't think there is a way to disable that warning.

SERVER.XML re-write problem when changing HTTP to HTTPS

Hello,
I am using SUN ONE App server and had a problem with turning SSL on in order to use HTTPS.
What I did was that in GUI I selected a http listener under my instance and checked SSL/TLS Settings. I clicked Apply Changes button and I got a message saying that there wa a problem with XML-DOM. I checked my server.xml and found that its size was 0. It seems that it stopped re-writing it when it met the problem.
An interesting thing is that when I created an additional http listener with SSL at a different port, there was no problem.
It seems that the problem occurs only when I tried to change HTTP to HTTPS.
Is there anyone who can tell me why this happens?
I will appreciate any answers or comments.
Thanks

Hi,
Is your Implementation Class is still the same (as the old one), when you changed the pre-fix.
Just double click on the Implementation class and check whether the methods are still implemented or not.
Thanks, Advay

Office Web Apps is HTTP, But, Want to change it to HTTPS - How ?

Forum,
We have deployed and configured a single Office Web Apps server farm to use HTTP, Using TechNet instructions e.g.:
New-OfficeWebAppsFarm -InternalURL "http://servername" -AllowHttp -EditingEnabled
New-SPWOPIBinding -ServerName <WacServerName> -AllowHTTP
Set-SPWOPIZone -zone "internal-http"
AllowOAuthOverHttp to True
And everything is working perfectly fine !
We now need to change it to use HTTPS and we have a certificate for that. But, Since it has been already configured with HTTP and it already has a configured binding, How can I change all this to HTTPS ?

you can try rebuilding the binding at SharePoint server -
https://technet.microsoft.com/en-us/library/ff431687
Remove-SPWOPIBinding -All:$true
New-SPWOPIBinding -ServerName <WacServerName>
Get-SPWOPIZone
// Take note of the WOPI zone that is displayed.
Set-SPWOPIZone -zone "external-https"
//If the results from Step 3 show that internal-https and the SharePoint farm is internal only, you can skip this step. If you have a SharePoint farm that’s internal and external, you need to run the following command to change the zone to external-https.
Or try by Rebuilding the OfficeWebApps Farm -
http://blogs.technet.com/b/office_web_apps_server_2013_support_blog/archive/2013/12/20/office-web-apps-2013-rebuild-your-farm-in-a-few-easy-steps.aspx
Take farm offline
Remove each machine (parent and child) from the farm
Recreate the farm - New-OfficeWebAppsFarm -InternalUrl "https://server.domain.com" -EditingEnabled -CertificateName *.domain.com
Rebuild the bindings on SharePoint Server : As explained above
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

FF keeps defaulting to the wrong HTTP proxy server and port. I have to change it every time I attempt to open Firefox? How do I change it for good?

The manual proxy settings keep defaulting to the wrong HTTP and port. This has caused me many hours of anguish. It works fine when I correct the settings but after you log off and then come back it has to be changed again. Is there anyway to fix it? Or can I go back to the previous version because 4 definitely has some issues (other than this one). I could live with it if I had to but I'm not the only one who uses this computer and they don't know how to make the changes. Thanks and I would definitely appreciate an answer.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do i change the http setting to high speed

how do i change the http setting to high speed ???

Are you experiencing problems with a slow connection in Firefox?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Another possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fine

Hi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish

How do I change the content-type in http header when using JAX-WS?

I need to change Content-Type in http Header. I am using JAX-WS to invoke web service call. Can someone tell me how to do it? Thanks a lot!

LabVIEW does so many wonderful things, but the inability to perform what should be a simple task, such as upgrade a RT chassis within a LV Project, bewilders me. This is going to cost me hours, I just know it...
Is there anything on the Idea Exchange for this?? A quick search shows nothing, so maybe I'll add an entry.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

HTTP adapter - change encoding from UTF-8 to ISO-8859-1

Hi,
I am trying to change the encoding used by the HTTP sender adapter in a scenario.
However, when I enter ISO-8859-1 in the XML Code under XI Payload Manipulation on the comms channel it has no effect - the paylad still shows as UTF-8 in SXI_MONITOR.
Am I missing a step or entering the field incorrectly ??
Thanks
Colin.

Hi,
From help
Enhancing the Payload
Some external systems, for example, Web servers in marketplaces, can only process data if it is sent as an HTML form using HTTP.
A typical HTML form comprises named fields. When transferring a completed form to the server or a CGI program, the data must be transferred in such a way that the CGI script can recognize the fields that make up the form, and which data was entered in which field.
The plain HTTP adapter constructs this format using a prolog and an epilog. Therefore, there is a particular code method that separates form fields and their data from each other. This code method uses the following rules:
     Individual form elements, including their data, are separated from each other by the character &.
     The name and data of a form element are separated from each other by an equals sign (=).
     Blanks in the entered data (for example, in multiple words) are replaced by a plus sign (+).
    All characters with the (enhanced) ASCII values 128 to 255 (hexadecimal 80 to FF) are transcribed using a hexadecimal sequence, beginning with a percentage sign (%) followed by the hexadecimal value of the character (for example, the German umlaut ö in the character set ISO-8859-1 is transcribed as %F6).
   All characters that occur in these rules as control characters (&, +, =, and %) are also transcribed hexadecimally in the same way as high value ASCII characters
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Regards
Chilla

Virtual Directory Change from Oracle HTTP Server to Embedded PL/SQL Gateway

We finally upgraded from htmldb 1.6 to ApEx 3.1.2 late last year. This was in conjunction with setting up a new server and installing Oracle 11g DB, while our production DB is still 10g. During this install, I opted for the Embedded PL/SQL Gateway, whereas our htmldb is running with the Oracle HTTP Server.
During the conversion of one of our applications I learned that Virtual Directory references to #IMAGE_PREFIX# are no longer valid for custom CSS so I had to change an entry in the page templates that I'm using to use #WORKSPACE_IMAGES#. Now I am importing another application from our htmldb 1.6 environment to our ApEx 3.1.2 environment, and I have a new problem that I think is related.
In this application we have been uploading report files for outside users to be able to download at their convenience. I think the upload is working OK, but when I try to download the report file I get the following:
Not found
The requested URL /apex/IMR.ofile was not found on this server.
The download is accomplished with a link on an SQL Report region. The Column Link info is:
Link Text = <img src="#IMAGE_PREFIX#edit_big.gif" border="0" alt="Icon 1">
Target = URL
URL = #OWNER#.ofile?p_file=#VIEW_REPORT#&v_auth=&APP_USER.
When I change the Link Text to <img src="#WORKSPACE_IMAGES#edit_big.gif" border="0" alt="Icon 1"> I lose the Edit Icon image. However, what I'm really concerned about is the URL not found error
Now, maybe I'm barking up the wrong tree, so if the problem isn't related to virtual directories, which tree should I be barking up?
Any suggestion?
Thanks,
Gregory

Is the IMR.ofile a custom package for downloading files? If so, you might need to add it to the wwv_flow_epg_include_mod_local function.
I am not certain how this function also plays into the embedded pl/sql gateway, but do know it would affect this running through Oracle HTTP server when configured with the before proc.
With the embedded gateway it may very well be that you need to add this package into the ACL for outside availability.

Change over from a simple Xml call to a rpc-Http call ....

Hi there,
I need to change over from a simple Xml call:
<mx:XML id="urlsGeneral" source="http://www.mySite.com//.../AFS.xml"/>
to a rpc-Http call which is updating the readout if Xml is changed at any time.
I forgot to mention the most important item yet a very simple one: I need this only to be displayed in a title etc, and NOT a datagrid or else example below.
title="{urlsGeneral.urlGeneral.(@name==0).age}
I tried a lot today, but just can't get it right as the id="urlsGeneral" is always the problem.
Any help would be appriciated !!! Thanks in advance. regards aktell2007
<urlsGeneral>
<urlGeneral>
<name>Jim</name>
<age>32</age>
</urlGeneral>
<urlGeneral>
<name>Jim</name>
<age>32</age>
</urlGeneral>
</urlsGeneral>
Another call:
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
public var myData:ArrayCollection;
protected function myHttpService_resultHandler(event:ResultEvent):void {
myData = event.result.urlsGeneral.urlGeneral;
]]>
</mx:Script>
<mx:HTTPService
id="myHttpService"
url="http://www.mySite.com//..../AFS.xml"
result="myHttpService_resultHandler(event)"/>
Preferable I wanted something like this to work:
<mx:Script>
<![CDATA[
import mx.rpc.events.FaultEvent;
import mx.managers.CursorManager;
import mx.controls.Alert;
import mx.rpc.events.ResultEvent;
import mx.rpc.xml.SimpleXMLDecoder;
// Don't use here as it is already used in .swc !
/* import mx.rpc.http.HTTPService; */
private var myHTTP:HTTPService;
private function initConfigCall():void {
myHTTP = new HTTPService();
myHTTP.url = "com/assets/data/changesAppAIRPIOne001.xml";
myHTTP.send();
myHTTP.resultFormat = "xml";
myHTTP.addEventListener(ResultEvent.RESULT, resultHandler);
myHTTP.addEventListener(FaultEvent.FAULT, faultHandler);
CursorManager.setBusyCursor();
private function resultHandler(evt:ResultEvent):void {
var xmlStr:String = evt.result.toString();
var xmlDoc:XMLDocument = new XMLDocument(xmlStr);
var decoder:SimpleXMLDecoder = new SimpleXMLDecoder(true);
var resultObj:Object = decoder.decodeXML(xmlDoc);
// Removed [0] on single node !
appUpdateAvl.text = resultObj.application.configApp.appNewUpDate;
appLastChanged.text = resultObj.application.configApp.appLastChanged;
appChangedSections.text = resultObj.application.configApp.appChangedSections;
CursorManager.removeBusyCursor();
myHTTP.disconnect();
private function faultHandler(event:mx.rpc.events.FaultEvent):void {
var faultInfo:String="fault details: "+event.fault.faultDetail+"\n\n";
faultInfo+="fault faultString: "+event.fault.faultString+"\n\n";
mx.controls.Alert.show(faultInfo,"Fault Information");
var eventInfo:String="event target: "+event.target+"\n\n";
eventInfo+="event type: "+event.type+"\n\n";
mx.controls.Alert.show(eventInfo,"Event Information");
CursorManager.removeBusyCursor();
myHTTP.disconnect();
]]>
</mx:Script>

Hi again,
These days there are more quetions than answeres on any forum, and very seldom anybody shares the answer if they lucky enough to work it out so here is my answer for the above question
Change over from a simple Xml call to a rpc-Http call ....
I had it all along as a commend noted: // Removed [0] on single node !
So instead of title="{urlsGeneral.urlGeneral.(@name==0).age} it would be now title="{resultObj.urlsGeneral.urlGeneral.[0].age} and now it works perfectly well. I hope that one or the other of you can use the answer and the code !!! regards aktell2007

SOAP Response change from http 200 to http 204

Hello
I must change for a application, that call a webservice on the pi, change the
SOAP Response from HTTP 200 OK to HTTP 204. I think that must chnage on the SOAP Adapter and wei can't change in the messages or mapping. Also wit a Fault Messages is this not runnig.
What is with BPM, have any body do somthing with that.
Regards Tom

Hello Stefan
This thrid Application need this response. We cann't change this. We spaek with this product manager, but he want change this. He want this when the interface is async, that application now no conntent come back.
Regards Tom

Changing port for http server not working, please help

Hi Gurus
I installed standalone hhtp server from db companion cd on AIX 5.3 10gR2.
I tested the http server URL http://XXX.XXX.XXX.com:7777/epdev/helloworld
after creating a procedure in the db and it works
But I need http server to use port 80 and not default of 7777
I did 2 changes in httpd.conf - Port 80 and Listen 80 But after this I am not
able to start http server . Can somebody tell me what am I missing here ?
I even tried starting it as root and got error as well
$HTTP_HOME/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=cov6053:6200
0 of 1 processes started.
ias-instance id=IAS-X-cov6053.6299
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=720916)
failed to start a managed process after the maximum retry limit
Log:
/export/host/thishost/unix/cen/app/oracle/product/http10.2/opmn/logs/HTTP_Server~1
The log file has this entry no error:
07/11/15 10:45:26 Start process
/export/host/thishost/unix/cen/app/oracle/product/http10.2/Apache/Apache/bin/apachectl start: execing httpd
Thanks a lot for your help

I was able to reslove this. Followed this :
On UNIX, you will hare to run as root if you want to run on ports less than 1024.
In order to run Oracle HTTP Server as root, perform the following steps:
Shutdown Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] stopproc ias-component=HTTP_Server
Change to root user. Navigate to ORACLE_HOME/Apache/Apache/bin on UNIX or ORACLE_HOME\Apache\Apache\bin on Windows and execute the following command:
chown root .apachectl
chmod 6750 .apachectl
Exit root.
Restart Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] restartproc ias-component=HTTP_Server

OSB+how to change content type header in http transport header.

I have a requirement where I need to change the value of:
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
to the end system specific like:
<http:Content-Type>application/abcd-cvs-v1+xml; </http:Content-Type>
and the http:accept value to:
<http:Accept>application/abcd-cvs-v1+xml</http:Accept>
Can some one please explain how to do this.

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html
Use replace action/insert on the follwoing QPath in trhe request action of the ServiceCallout/Routing as
$outbound/ctx:transport/ctx:request/tp:headers/http:Content-Type
$outbound/ctx:transport/ctx:request/tp:headers/http:Accept
Manoj

Jax-WS Client - Change Endpoint Address "https" to "http" - Cause HTTP 302

Hi,
I don't know it is a bug or not, but i couldn't find any answer for this.
I try to write a client for an SSL Secured and Basic Authenticated web service. To access the WSDL url, i have a VPN connection to that network. Also i registered their certificate to the JVM that i used to run the Client.
To create Jax-WS Client codes, i used "......\jaxws-ri\bin\wsimport.bat -s src -d bin -p model https://xxxx.com/xxxxxx.asmx?WSDL" as explained.
After successfully generated sources, i added my "SecurityEnvironmentHandler.java" to catch Username and Password callbacks, and also added "SecurityHandler.java" to register my handler and surrund with necessary SOAP Header Security tags. I register them as explained too.
Everything looks fine, but when i try to run Client test which basically call one of the services, i get
com.sun.xml.ws.client.ClientTransportException: The server sent HTTP status code 302: Found
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.checkStatusCode(HttpTransportPipe.java:203)
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:177)
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:93)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:598)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:557)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:542)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:439)
     at com.sun.xml.ws.client.Stub.process(Stub.java:222)
     at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:135)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:109)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:89)
     at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:118)
     at $Proxy36.xxxxxxxxxxx(Unknown Source)
     at xxxxxxxxServisImpl.xxxxxxxxxxxxx(xxxxServisImpl.java:69)
     at xxxxxxxxxServisTest.testxxxxxxx(xxxxxxServisTest.java:57)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at junit.framework.TestCase.runTest(TestCase.java:154)
     at junit.framework.TestCase.runBare(TestCase.java:127)
     at org.springframework.test.ConditionalTestCase.runBare(ConditionalTestCase.java:69)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)( i have changed some unnecessary parts with "xxxxxx" )
The basic of it i get an "*HTTP 302*" which means it tries to redirect the request.
Also i had an working copy of a sample Client which was written with Jax-RPC. I looked the generated SOAP Messages for both of clients, they was almostly the same.
After lots of tries, i found the problem, somehow after the client application starts, it changes the Endpoint Address "https://xxxxxxxx.com/xxxx.asmx" to "http://xxxxxxxxx.com/xxx.asmx", ( it drops the "s" wich means it changes the protocol HTTPS to HTTP ).
If i set the Endpoint Address to "https://xxxxxxxx.com/xxxx.asmx" before calling any service on port, it works as it should be.
On the "generated" main WebServiceClient class the WSDL address and also Endpoint Address were set correctly ( with https ).
Also do i missing any logical part of it? Because i didnt changed it, it generated from WSDL by using "wsimport", it couldnt be a mistake, of if it would be, somebody could see that.
Thanks for any advice.
Umut KUNDUKAN

Welcome to the forum. Please don't post in threads that are long dead. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now.

WLS 8.1 Apache Plug-in is changing HTTP status code 999 to 500

I'm seeing the weblogic server 8.1 sp4 apache plug-in change the HTTP status code of 999 (set by the application) to 500 Internal Server Error. I'm seeing this with Apache 2.0.48 on aix and with Apache 2.0.58 on windows. I've tried the plug-in from 8.1 SP2, SP4 and SP6 with all yielding the same result. I've tried the SSL plug-in too - same result. I'm told by the maker of this application that they are not seeing this issue with the plug-in for SunOne/NES. What does BEA say about the Apache plug-in changing the http status code? Why is it doing this? Why doesn't the SunOne/NES plug-in do it? Can you provide a plug-in that does not do this?

Try setting
Debug ALL
inside your IfModule. All proxy activity will be written to /tmp/wlproxy.log (on
unixes). If no info appears in the log, Apache is not invoking the plug-in properly.
HTH
"Lukas" <[email protected]> wrote:
>
I am trying to set up Apache 2.0.49 proxy plug-in for my WLS 8.1 cluster
(2 managed
servers). I followed instructions at http://edocs.bea.com/wls/docs81/plugins/apache.html.
My test web application runs on
192.168.10.142:5001/public/testwebapp
and
192.168.10.142:6001/public/testwebapp
I have tested my cluster using another instance on WLS and HttpClusterServlet
and it works fine.
I have added following section to my httpd.conf
LoadModule weblogic_module modules/mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicCluster 192.168.10.142:6001,192.168.10.142:5001
</IfModule>
<Location /public/testwebapp>
SetHandler weblogic-handler
PathTrim /public/testwebapp
ErrorPage http://myerrorpage1.mydomain.com
</Location>
I restarted my wls cluster and apache as well and when I specify http://192.168.10.142/public/testwebapp
(apache web server) I receive Error 404--Not Found (even thou I have
tested my
http://192.168.10.142:5001/public/testwebapp and http://192.168.10.142:6001/public/testwebapp
- they work correctly).
There is nothing in apache’s error_log file.
There is a record in access_log file reading:
192.168.10.126 - - [08/Jun/2004:16:23:32 -0700] "GET /public/testwebapp
HTTP/1.1"
404 1214
which gives me an impression that “proxy” – forwarding does not work.
Where should I look for some errors?
Thanks,
Lukas

HTTPS changed to HTTP

Similar Messages

Maybe you are looking for