Https configuration on integrated ITS

Hello Gurus,
Can someone, please highlight the steps in enabling https configuration to the backend r/3 system from the integrated its for EP7 - java system. The portal content t is already enabled https.
thanks & regards,
Sankar.

i assume that ICM (internet Communication manager)configuration is done and your concern is only about configuring SSO.
the complete details are given in OSS note number 517860.
there is alos a test BSP application to check whether SSO is configured. and the url for the same is
http://wasserver.xxxx.com:<port>/sap/bc/bsp/sap/system/sso2test.htm?sap-user=<userid>&sap-password=<password>&sap-client=<client>
Hope this helps.
Regards
Raja

Similar Messages

ECC6 integrated ITS default port 8000 changed to http port 80

We want the ECC6 integrated ITS default port 8000 changed to http port 80. The integrated ITS Cat2 transaction is currently working on http port 8000. I changed the icm/server_port_0(Instance Profile) and the ICM Monitor Active Services(smicm services) to use port 80. Cat2 transaction fails http fails after system restart. I have reverted back to 8000 and all is now working again. Is there more work that needs to be carried out or is port 80 is supported?

is your application server in domain?
if its in domain and when used sapides.<xxxx>.com if you get DNS not found, may be browser is looking up internet, put your domain in the exception in tools->internet options->connection->lan settings->proxy->advanced
"This server does not support HTTPS! It is therefore potentially unsafe to send your password" i just a warning message and you should still be able to log on.
(if you want to hide this info let me know)
and i never could logon into R/3 !!
do you also see a message that SSO2 is not configured? if yes follow the steps explained in OSS note no.517860
when you say never could logon what happens,
a) the field for user id pwd disabled? - click on the basic authentication button to get the log on pop up
b) error messages?
Regards
Raja

Configuring Integrated ITS for other browsers?

Is there a enhancement package or anything else provided by SAP to allow other browsers like Safari, Chrome, Opera and etc... to work with Integrated ITS w/o getting the ugly ITS error page saying the browsers is not supported?

Hi,
you can turn off the browser check in SAP ITS as it is described in note Note 972116 - Integrated ITS, browser invalid/not supported
by adding parameter ~USERAGENTCHECK 0
Bets regards, Artem

Integrated ITS on SRM:Login Page Problem

Hello All,
   I am working on SRM 4.0 with Internal ITS.I have done all the required settings for Internal ITS.I am able to get the login page but when I enter the user Id and password of my SRM system,It shows the erroe that "Incorrect SSO configuration on this server ".
   I have checked the transaction RZ11 on SRM Server for the parameter login/accept_sso2_ticket.It is set to value 0.
   Can anyone tell me what extra settings are to be done for the Integrated ITS?Please help.
Thanks & Regards,
Deepti.

Hi Raja,
   I have changed the default language in the system settings for the service BBPSTART as English.Also I have made the following changes for the same service :-
1>Changed the Logon procedure to "Alternative Logon procedure " and in that I have removed "SSO Authentication".
2>In system Logon Configuration,I have changed the default client and language.
3>In service data,I have changed the Basic authentication from Standard r/3 User to "Internet User".
After doing the above changes,I have republished the service.
Now i am getting the Login Page(in language English) but with the message "SSO cannot be used for logon To continue, choose "Logon". A dialog box appears, where you can enter your user and password. This server does not support HTTPS! It is therefore potentially unsafe to send your password ".
After that when I enter the ID and Pwd,I get the same Login screen(USER,PWD,CLIENT,LANGUAGE AND ACCESIBILITY Labels) but this time below there is the message "Inocrrect SSO configuration on this server".
Please tell me the exact changes so that I can login to the homepage.
Also to avoid the Login page,I have tried entering the Login Details in anynomous Logon data,but then I directly get the Homepage with the Menu on the Left hand Side and when I click on any of the items,I get the screen with the following text:-
SSO is not active in system
To continue, choose "Logon". A dialog box appears, where you can enter your user and password.
This server does not support HTTPS! It is therefore potentially unsafe to send your password
Copyright 2002-2004 SAP AG All Rights Reserved
I am not able to understand why the system is prompting me for the SSO settings when I have set the parameters(LOGON_ACCEPT_SSO2_TICKET AND LOGON)_CREATE_SSO2_TICKET to 0).
Please help.
regards,
Deepti.

Some problem about integrated ITS 640

How to change Webgui theme in integrated ITS 640
Dear all ,
My system is ECC5,the Package level it SAPKGPRC05,SAPKB64015,SAPKA64015,SAPKH500010.
now, I configure integrated ITS with T-code SICF .
I create a external aliases "/sap/bc/gui/sap/its/webgui" ,aAfter that I can connect to the
ITS with the following URLs:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
But now ,I have some problem cannot solve as follow:
1 When I logon ITS, the default language is English ,only English and Genman may be
selected,The requirement is that I want to use other language as the default logon language.
When I on the pop-up dialog box "Change External Alias" tab " Service data" ,"Anymous Logon
Data "select a Language "Chinese",the system pop-up a message box show "code page not
supported".how can i configure the default logon language ?
2 I hope use "https"-- Security Reqiurements ,as a security link ,so I selected "SSL",aAfter
that I can connect to the ITS with the following URLs:
https://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
IE show cannot find the web system .
And use the following urls:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
only show the logon page and notice the error "Logon not possible; none of the active logon
procedures is possible"
and how can I configure the "https" ? and must configure with se38 "W3_PUBLISH_SERVICES"
program together ,if like that ,i must republish all of the component again ?
3 I hope change the webgui theme , in ITS620 have theme 00,90 ,99 .and we can select
"EnjoySAP". but in integrated ITS 640 , i donot know where to find the its admin page to
setup the theme . can you tell me how can i find the admin page to setup the theme .
thanks all ,hope your reply !
Message was edited by:
Benson Lu

Hi,
Hope this Information is useful.
The SAP Integrated ITS only supports the new "Tradeshow" design (unlike the "standalone" ITS which also supports the well-known EnjoySAP design). The new design is more easily incorporated into the Enterprise Portal and is better adapted to the design of other SAP Web UI technologies (BSP, WebDynpro).
There are also changes to the header area in SAP integrated ITS in Tradeshow: The menu bar and standard toolbar functions are collected on either side of the transaction code field in the buttons "Menu" (on the left) and "System" (on the right). The application toolbar elements are then displayed to the right. Instead of symbols, the system displays the text description. If there is insufficient space to display all buttons, you can display the other elements by choosing the "More" button to the right of the screen.
Exceptions:
In Release 6.40 (NetWeaver 2004) , the new design is only available for the Internet Explorer. As of Release 7.00 (NetWeaver 2004s), it is also available for Firefox and Mozilla Browser. For this reason, the Enjoy design continues to be supported for Mozilla and Firefox in Release 6.40 (but only for these browsers, and even then only for this design, and not Tradeshow).
Furthermore, in Release 6.40, there are some Internet Application Components (that is, Web applications that build on the ITS), which continue to be displayed with the "Enjoy" design. Of course, the "Enjoy" design continues to be supported for these applications.
You can use SITSPMON Transaction to monitor the integrated ITS.
Thanks,
Tanuj

List of all service parameters for Integrated ITS

Hi,
I am looking for the complete list of service parameters for Integrated ITS, with explanation about each of them. Ex: ~command, ~sap-user etc. I have tried searching in help.sap.com and in this forum and SDN blogs. I could find only some of them. I am not looking for anything particular right now. If I have the complete list it would help me to refer the list if I need any one in particular.
I would really appreciate if anybody can help me in this search.
Thanks & Regards,
Sudhakar.

Hello Sudhakar,
The best location for ITS Parameter documentation is the online SAP Library at http://help.sap.com/saphelp_nw2004s/helpdata/en/54/4d9993c6592941a407313a6763575c/frameset.htm
Here under "Configuration" you will find a list of parameters for developers and administrators.
Edgar

Integrated ITS in a Separate App Server (DI) for Security and LoadBalancing

Hi Experts,
I have a specific requirement for ITS Configuration.
1. Production Server ( CI + DB ) -> Existing
[ ERP6.0 ]
OS : Solaris 10
DB : oracle 10.2.0.2
H/W: PRIMEPOWER650
Unicode Enabled
2. Application Server ( DI ) --> to be made ( and to be used exclusively for Web users)
OS : Windows2003 sv
H/W: RX200 S3
x64
MEM: 8GB
No. 1 is existing Production Server Environment.
The Customer Requirement.
The Customer wants to use the ITS . But he doesn't want the existing Production Server to be disturbed for the same for 2 reasons. [ Security and Load Balancing ]
We are planning to create a Separate Application Server (DI) to work as ITS.
As the Kernel is 700. The ITS is integrated into the Production Server by Default.
We have written to SAP and have asked whether the Production Server ITS can be disabled and the Separate DI's ITS be enabled so that the NEW ( No.2 ) Application Server will be used for ITS activities.
SAP has replied saying the Integrated ITS cannot be disabled at the Production Server. Instead as an alternative we can create a Logon Group (using transaction SMLG) and divert all the Web users to the Separated DI (No.2). We have decided to go according to SAP.
Now I have the following questions :
1. The Operating Systems of the Production Server (No.1) and the Separate AP (No. 2)
are different. ( Are there any complexities involved or must do points to be taken care. )
2. Brief / MUST DO tasks at the Production Server Environment and Must do tasks at the DI Environment.
I hope someone has already done some few installations on the above combination, if so, request to please share me your ideas.
Thanks in anticipation
Best Regards,
Paguras
PS :
my earlier discussion on the same topic on this community.
ITS Specific Requirement

Hi Markus,
Thanks for the Reply.
We have the following 2 plans :
Plan-01.
As you have advised, we will try to disable ITS of CI and enable ITS of DI.
Plan-02.
If Plan-01 could be worked out successfully, well implement as per SAP suggests. Creating a Logon Group and divert all the web users to the DI alone.
To deactivate ITS on CI, you have mentioned to make sure, that the system does not listen on the HTTP port (transaction SMICM) on the Servers
BTW, I have seen a parameter called ITSP/ENABLE. if we deactivate this parameter at CI & DB and then activate the same parameter at DI.
My questions to you :
1. Shall we go for Plan-01 ignoring what SAP OSS has said. ?
2. Disable ITSP/Enable Parameter -> CI & DB
Enable ITSP/Enable Parameter -> DI has to be implemented .
Thanks & best Regards,
Paguras
PS: Sorry for always pounding you with so many questions on the same topic.
SAP Help on ITSP / enable parameter
itsp/enable
You use this parameter to deactivate (0) or activate (1) the integrated ITS. Even if the integrated ITS is activated, it only accesses system resources when it is actually used. Nevertheless, it can make sense to deactivate it to prevent users from accessing the SAP system with SAP GUI for HTML via special application servers (such as batch or update instances). Since the conversion of SAP screens into HTML pages uses additional CPU time, it makes sense to reserve a number of dedicated application servers to be used with SAP GUI for HTML and to use a special logon group to balance the load between them.

Logoff error with Integrated ITS

We are receiving the following error message (on a new web page) when trying to logoff of SRM using the Integrated ITS.
Service Unavailable
The proxy is currently unable to handle the request due to a (possibly) temporary error. Extended error information is:
Failed to forward the request to the web server at sap.corp:1000000. This may be due to a firewall configuration error or a DNS failure.
If this situation persists, please contact your firewall administrator.
Any idea on how to resolve this issue?

Hi Shannon
Check if You have an '~exiturl' parameter provided for this page.
~exiturl should be look like this:
"~exiturl http://<your_host>/scripts/wgate/bbpstart!"
Regards,
Marcin Gajewski

Need help on integrated ITS URL format for CIC Account Overview

Hello CCS Experts,
We just upgraded from 46C to ECC 6.0 ( CCS 464 to UT 6.0 ). We used to have external ITS for CIC0 in 46C , Now we are trying to make CIC0 work with Integrated ITS. Our basic Integrated ITS services work , did all the configuration like SICF activation of necessary services ( Including EWB_WEBGUI and EWHV for call center ), publishing sevices to INTERNAL site using SE80 etc... And Test service works fine on all these services.
But when I go to CIC0 and click on Account overview , I get Service Can not be reached. I have checked transaction CICAM and maintained it point to the internal ITS machine with the right port number. But no luck...
The old URL used to be as below for ISUACCOUNTOVERVIEW.
http://dr3-da-1:8001/scripts/wgate/zzewhv_acct_ovw/!?view=ao_isuacct&classid=isuaccount&~okcode=+
My question is how should the URL be changed to work with Integrated ITS , Need specific format. Has anyone had this issue , or can direct me to some customizing documentation.
Thanks
Regards
Venu

Looks like you have a customized overview instead of the standard one. The standard URL looks like this
http://<your.its.url>/scripts/wgate/ewhv_acct_ovw/!?view=ao_isuacct&classid=isuaccount&~okcode=+
Your URL shows "zzewhv_acct_ovw" instead of the standard "ewhv_acct_ovw". See if you have created a custom class based on the standard one.

Integrated ITS 6.40 - Connect to SAP R/3 4.6 C

Hi,
here first the tecnical details as required :
SAP-BW 3.5 SP 15
SAP R/3 46C
Web browser IE 6
Integrated ITS release 6.40 Kernel patch level 105
I am trying to establish the ITS connection in order to be able to jump from Web reports to a specific CO transaction in SAP R/3. Given my poor technical knowledge, it is not working but I have already made the following check and settings.
- in SICF, I have activated the service 'WEbgui' following the path SAP/BC/GUI/SAP/ITS.
- I have made sure in the profile of the instance that both parameters 'itsp/enable' & 'em/global_area_MB' were properly maintained.
But it is unclear to me how to maintain the entry in table TWPURLSVR. What I have done so far is the following :
- logical system corresponding to the target client in SAP R/3
- Web server of the BW instance /sap/bc/gui/sap/its/webgui
- Web protocol : HTTP
- GUI start server of the target client in SAP R/3
When trying to make the jump from a Web report, I get the following error message stating :"http://host:port/scripts/wgate/webgui/! call was terminated because corresponding service not available."
Any help would be appreciated (and rewarded)
Thx
Stéphane Beguin

you can call a transaction of BW system using the integrated ITS.
for ex. for Txn SE38 it will be
http://host.domain.com:port/sap/bc/gui/sap/its/webgui/!?~transaction=se38
but from BW system's integrated ITS you cannot call a transaction of your R/3 system (which is on 4.6C)
if you want to call a transaction of R/3 system from your BW query you have to have a standalone ITS installed. (yes separate server).
also check out this link.
http://help.sap.com/saphelp_nw04/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm
Regards
Raja

Log off problem in integrated ITS

Hi,
our cancel button for ending the application with an external ITS works fine and the exitURL which is deposit in the service file will be shown.
But with an integrated ITS it doesn't work. I know that this exitURL doesn't work in an integrated ITS.
So I left a redirect URL in the SICF > ErrorPages > Log Off Page > Redirected URL
but nothing happens after clicking the cancel button. The browser works and works but the old screen is still seen. What's wrong? Why the page will not be redirected to given Url?
Can anybody help me?
This works:
wgateURL(~command="logoff", ~exitURL="http://www.sap.com")
but we need a standard exit like described above and I think the way above should be right.
Thanks, Susanne

This was discussed recently.
check out this thread
Close the IE page on click of a button in the transaction
Regards
Raja

Icon (mime objects) not getting displayed in Integrated ITS

Hi all,
We have activated integrated ITS. Created service in SICF but the ICONS of Buttons are not shown. Also we cannot click any button to start the action.
Please advise.
Regards,
FS

Hi FS,
The Mime Types in SAP Its Integrated are on this path: /sap/public/bc/its/mimes/
You can reference your icon with the URL: http://host:port/sap/public/bc/its/mimes/service/theme/icon.gif
If you have the icon of theme 99 in the SE80 Internet Service and your icon name is square.gif, and your service name is ZSERVICE, the call are:
HTMLB:
img src="/sap/public/bc/its/mimes/ZSERVICE/99/square.gif" between symbols "<" and ">"
URL in the Explorer:
http://host:port/sap/public/bc/its/mimes/ZSERVICE/99/square.gif
Hope it´s help.
Best Regards.
Edited by: Alberto Ruiz on Apr 8, 2009 4:02 PM

Stack overflow error when connecting to SRM with integrated ITS

When I try to connect to SRM Server through Integrated ITS, it is giving me the error "Stack overview, giSAPWP is null or not an object. Kindly let me know how to resolve the error.

Hi Arun,
Are you running with Portal ?
If yes, could you confirm the following point :
- portal and ITS of the SRM system run under the same protocol (both under http or https, ELSE it is not possible),
- portal and ITS of the SRM system are in the same domain
Kind regards,
Yann

Load balancing on Integrated ITS

Hi
How do I setup load balancing on Integrated ITS.
Windows 2003 server.
Thanks

Hello,
You'll need a third party load balancer or you can use the SAP Web Dispatcher. You can find more information on the SAP Web Dispatcher at: http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm
Edgar

System not configured as Integration Engine

Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
Chan

Hi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

Https configuration on integrated ITS

Similar Messages

Maybe you are looking for