HTTPS inbound blocked?

Hello,
I have FIOS bundle with 35/35 internet plan. I access my home computer using RDP gateway which runs on port 443 and there is no way to customize the port it can run on. Until a week ago, it was working fine but I can't access it anymore.
The router is MI424WR. Please don't ask if I have configured router properly as if you read the lines above, you can tell it is, it was working fine until last week. There is no router port forwarding configuration issue, I can guarantee.
Has verizon changed and started blocking inbound port 443 recently? If not, what can I check? I have rebooted router already to no avail. If I need to call support, that's ok, I was hoping to rule out the obvious before I call them though.
Thanks for all replies in advance.
Solved!
Go to Solution.

RDP connects to single machine. RDP Gateway allows me to connect to my Hyper-V lab running on my desktop without session hopping.
It turned out to be my forwarder set to incorrect machine configuration. Once corrected, it started working again. No rule changes or issues with router configuration.

Similar Messages

SOAP version for B2B HTTP inbound message in SOA Suite 11.1.1.7

Is there a way to find out the SOAP version supported by B2B HTTP inbound message in SOA Suite 11.1.1.7? Has there been a upgrade of SOAP version to SOAP 1.2?
The reason behind this assumption is because we are facing following error when an external service posts an XML message enclosed in SOAP envelope (SOAP 1.1) to B2B Sync Receiver Servlet:
Mime Header Content-Type: text/xml requires SOAP envelope namespace
Since SOAP headers are already added in the message we are not expecing to face such issue. As per my understanding this issue maybe seen when there is a SOAP version mismatch.
Moreover, this issue is not seen when this external service posts the same SOAP message to B2B Sync Receiver of SOA suite 11.1.1.6.
Any help would be highly appreciated.
Thanks,

I resolved the issue by myself, The connection factory which I was referring was duplicated. Hence messages were not dequeueing.
I would be able to found the issues by creating a similar test case scenario.
Cheers,
B

Receiving Custom XML Document over AS2 (HTTPS) - Inbound Processing

Hi All,
Need help in Receiving Custom XML Document over AS2 (HTTPS) - Inbound Processing
External Trading Partner will be able to post the XML Documents to https://<b2bconsolehost>:<b2bconsoleport>/b2b/httpReceiver.
Here is the process flow:
1. External Trading Partner will be posting the XML Documents to https://<b2bconsolehost>:<b2bconsoleport>/b2b/httpReceiver
2. B2B, consumes the Custom XML validates as per the XSD and process it.
3. How to send the ACK back to External Trading Partner if it validates successfully and sent it to 'IP_IN_QUEUE'
4. How to send the ACK back to External Trading Partner if the validation fails after receiving the XML document.
5. Does the External Trading Partner require any certificates to post the XML Documents to https://<b2bconsolehost>:<b2bconsoleport>/b2b/httpReceiver (no need of encryption/decryption)?
6. How to enable the B2B server to accept the HTTPS messages from the Trading Partner (no need of encryption/decryption).
Please let me know. Thanks In Advance.
Regards,
Amirineni

Hi Nandu, Ramesh,
We have done the set-ups for transmitting a Custom XML Document over HTTP1.1 in B2B.
Our Business Case is as follows:
1. Read the Flat File using BPEL File Adapter
2. Transform the Message in BPEL and send it to B2B
2. Based on the set-ups in B2B, we need to post the XML message to the folliwng URL:-
http://databridge.buy.datastream.net:5555/invoke/dsImport/receiveXML
In the B2B Set-Ups, I have done the following:
Business Protocol name: Custom Document over Internet
Exchange Protocol: AS
Document Protocol: Custom
Transport Protocol: HTTP-1.1
Host name : http://databridge.buy.datastream.net
Port: 5555
I have also deployed the agreement as well as the configuration. The issue that I am currently facing is when I select the configuration in WSIL browser in JDeveloper, I am getting the following error:
"Unable to get schema information for target".
Hence I am not able to map the message in BPEL and send it to B2B.
Could you please let me know the possible causes and if I am missing anything in the set-ups in B2B.
As always, your help and guidance is highly appreciated.
Thanks,
Dibya

XI - HTTP Action Block Error !

Hi Guys!
I have problem when using XI HTTP Action block.
Everthy worked fine few days back , now i get below error strange
[ERROR]: Error: Status (502): Proxy Error ( The specified network name is no longer available. )
[ERROR]: ACTION FAILED: End Action HTTP_XI_0 : ( )
Any reason , i have not changed any settings
rgds
Savy

Hi,
You have to do the Proxy settings in System Management----->System Administration.
Go to the below link for help:
http://help.sap.com/saphelp_xmii120/helpdata/en/45/59840fe39065d1e10000000a1553f6/content.htm
-Suresh

B1I HTTP inbound

Hi to all,
I'm try to connect an external site to Sap Business One.
In my scenario I have:
Type: B1.2007 -> ID: 0010000101
Type: H.AnySystem -> ID: 0010000104
I created a biu from H.AnySystem to B1.2007, a BizPackage and a process for this.
In B1iSN Guide u2013 04 Connectivity is specified that for HTTP inbound data i need to use
http://<ip>:8080/B1iXcellerator/exec/ipo/<sysid>.inboundRR/com.sap.b1i.datasync.ipo/P61/P61.ipo/HTTPInbound
when I try to connect via brouser my URL (I need to receive XML data from H.AnySystem).
http://localhost:8080/B1iXcellerator/exec/ipo/0010000104.inboundRR/com.sap.b1i.datasync.ipo/P61/P61.ipo/HTTPInboundURL
the sytem ask me for userid/password I type B1iadmin/<mypassows>
i receive an error message.
XCE045 IPO-Step not known: /0010000104.inboundRR/com.sap.b1i.datasync.ipo/P61/P61.ipo/HTTPInboundURL
What i miss?
Is it possible to setup the inbound message without userid/password or specify a different one?
Regards
Flavio

Hi Hoe Pham Huy (H2)
Thanks for your answer but, I need to use HTTP not WS system because I receive POX messages.
The problem was in my wrong URL, the right URL as written in guide is
http://localhost:8080//B1iXcellerator/exec/ipo/0010000104.inbound/com.sap.b1i.datasync.ipo/P61/P61.ipo/HTTPInbound
and not mine
http://localhost:8080/B1iXcellerator/exec/ipo/0010000104.inbound/com.sap.b1i.datasync.ipo/P61/P61.ipo/HTTPInboundURL
I don't know how I did it.
Still remain the second question.
How is possible to define e specific user/pass, instead of use B1iadmin/<B1iadmin Password> or have no user/pass.
Regards
Flavio

Https pages blocked

Hello,
Recently, safari (I've tried firefox too) cannot open web pages with https such as my bank, hotmail, and every other website I use that has secure pages. The message is: "safari could not open the page ... because the server is not responding." I have tried empty cache, reset safari, repaired permissions, all to no avail. Can anyone please help me?

It seems to be a "security" problem introduced with 10.5.6.
I opened a case with Apple 2 days after the 10.5.6 update came out (I applied the combo update), the only thing you can do is to try to remove the phising check in the Safari prefs, but please be aware that this is not solving the problem.
I was the first one writing (look for my other posts in the forums) of this problem, and now seems that thousands of upgraders (to 10.5.6) are suffering the same issue.
on my macbook all the "standard" operations (init, reset, cache, proxy, security, little snitch, permissions, repair, new user..etc.etc.etc.) didn't solve the problem.
on my g4 powerbook with 10.5.5 the issue is not present.
with my macbook's wife, from scratch to leopard 1.5.6, very same problem, symptoms are:
- around 70% of https sites blocked (problem may be on the new OS process demanded to manage certificates).
- Inability to read and handle the cookies from https sites (it seems that Mac OS believe that the source who want to modify the cookie is not safe... don't ask me why!)
- slowness of dns lookup (it applies on ISP's DNS and also on other DNS sources. eg: OpenDNS).
Temporary solution?
use an "alternative" way to surf... (Parallels, VM..., Sun's VM).
it seems that Opera is "less" affected by the problem (I'm not sure if they use the internal OS procs to check https sites).
The problem, let me highlight again, seems to be on how MacOSX now treats https/certificates/phising/proxies...
Hope to have a solution soon.

HTTP Inbound and outbound - QoS BE

Hi Experts,
   I have two interface in my production environment.
     File>FTP adapter>PI--->Receiver HTTP adapter
    HTTP request t>PI-FTP Adapter --->File.
We don wanna to receive any response from the reciver back to sender.
But whenever i checks the message header in SXMB_MONI or MDT or RWB , the QoS service as BE.
Because of this Sender Sytem always expects some resoponse from PI or Receiver system. But we ahve not configured anything to frwd teh response to respective system.
My question here is, How should i make the QoS as EO which is for Async ?

Hey
>>File>FTP adapter>PI--->Receiver HTTP adapter
Since the quality of service originates from sender side,the above scenario should not expect any response since file is never BE (its either EO or EOIO)
>>HTTP request t>PI-FTP Adapter --->File
For this one,you need to explicitly specify QoS as EO in the URL you are using to post messages to XI
Look at the bottom of the below blog
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
you need to add &QualityOfService=ExactlyOnce in the URL.
Thanks
Aamir

HTTP Inbound error - 500 SOAP PARSING HEADER

I am working with receiving inbound acknowledgement a text file from the customer to FTP through XI, the URL I supplied to the customer is in the form.
http://<url address linked to XI server:port>/sap/xi/engine?namespace=<namespace>&
interface=<sender interface>&
service=<Sender Service>&
party=&agency=&scheme=&
QOS=EO&sap-user=&sap-password=&sap-client=005&sap-language=EN
Customer is receiving the error message and I don't see any trace of them contacting our XI. When I tried testing usign SAP pI 7 client test tool with out providing /SAP/XI/engine? it doesn't throw any error and no xml payload file generated in FTP though no error seen.
Any one have any idea what this probelm could be?
Thanks,
Menaga

Hi,
you can do this
1. start ICF trace form transaction SICF in order to log the message which is being send by your partner
this way if anything is reaching XI you will see it in the log
http://help.sap.com/saphelp_nw04/Helpdata/EN/80/b2dd3a6dac703be10000000a11405a/content.htm
Regards,
Michal Krawczyk

HTTP thread blocking

I have a flex application that uses livecycle and java WS.
While application is working I get one thread taking a lock on a flex.data.SequenceManager object then never releasing it. I suspect that it is somekind of a core process(not invoked by a user, because user functionality remains ok) but I can be wrong.
i only have the thread stack to define the cause
the thread holding the lock (in runnable state):
java.util.Collections.eq(Unknown Source)
java.util.Collections.access$000(Unknown Source)
java.util.Collections$SingletonMap.get(Unknown Source)
java.util.AbstractMap.equals(Unknown Source)
flex.data.ItemIdentity.equals(ItemIdentity.java:257)
flex.data.ItemIdentity.equals(ItemIdentity.java:257)
java.util.HashMap.get(Unknown Source)
flex.data.SequenceManager.findMostDisplacedItemIndex(SequenceManager.java:3012)
flex.data.SequenceManager.createSequence(SequenceManager.java:2848)
flex.data.SequenceManager.manageSequence(SequenceManager.java:819)
flex.data.SequenceManager.manageSequence(SequenceManager.java:787)
flex.data.DataService.serviceMessage(DataService.java:588)
flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1406)
flex.messaging.AsyncMessageBroker.routeMessageToService(AsyncMessageBroker.java:571)
flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1005)
flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)
flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:165)
flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:293)
flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:364)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.ja va:290)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
com.adobe.workspace.events.RemoteEventClientLifeCycle.doFilter(RemoteEventClientLifeCycle. java:152)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.ja va:235)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.ja va:235)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.jav a:179)
org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:1 57)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.jav a:580)
org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
java.lang.Thread.run(Unknown Source)
The thread that is blocked by a flex.data.SequenceManager object:
flex.data.SequenceManager.createSequence(SequenceManager.java:2417)
flex.data.SequenceManager.manageSequence(SequenceManager.java:819)
flex.data.SequenceManager.manageSequence(SequenceManager.java:787)
flex.data.DataService.serviceMessage(DataService.java:588)
flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1406)
flex.messaging.AsyncMessageBroker.routeMessageToService(AsyncMessageBroker.java:571)
flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1005)
flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)
flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:165)
flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:293)
flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:364)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.ja va:290)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
com.adobe.workspace.events.RemoteEventClientLifeCycle.doFilter(RemoteEventClientLifeCycle. java:152)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.ja va:235)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.ja va:235)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.jav a:179)
org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:1 57)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.jav a:580)
org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
java.lang.Thread.run(Unknown Source)
can anybody, by any chance, understand what kind of a process is being called from this trace?

Can you maybe remember the month or something so i could search it by meself in the mailing list? Was it the dev mailing list or the community mailing list?

Masking HTTP inbound URL for security and control - Seeking Ideas

I am working to transition an application to XI that is based on HTTP posts from vendors to provide data. In order to use the XI Plain HTTP adapter for inbound requests, I need to provide the vendor a very long url and query string that identifies the target system as XI (since the query string structure) and makes it difficult to make changes to the configuration without notification of the vendor (because of the values required in the query string).
Has anyone found a way to mask the query string using a BPM page or another method to provide a simple url to integration partners that will translate into the fully qualified url within my environment?

We solved this by using reverse-proxy with URL rewriting on network (NETAPP) appliance.

ISA550 permit HTTPS inbound, error that SSLVPN is already using port

I'm trying to permit HTTPS from anywhere to an internal web server. The ISA is running SSLVPN on one IP address. I am trying to create an ACL and NAT that allows HTTPS on a totally different IP address than the SSLVPN runs on. If I go to Firewall>NAT>Port Forwarding and create a port forwarding rule as follows:
Original Service: HTTPS
Translated Service: HTTPS
Translated IP: Internal server IP address
WAN: WAN1
WAN IP: External server IP address - not the same as the interface IP address
I get the following error:
The service HTTPS already is used by SSLVPN. Please use another service.
I feel like I'm missing something simple/stupid as I can't imagine that you can't have both SSLVPN and an internal HTTPS server running on two totally different IP addresses at the same time. TIA.

Hi,
You can try with :
Original Service: 8080
Translated Service: HTTPS
Translated IP: Internal server IP address
regards
Moorthy

HTTP Proxy Blocks RTSP Streaming

Hi all, at my work we have a proxy server required to get on to the web. I setup OSX in the network pref with the HTTP proxy but when i activate this all of my rtsp streaming fails. I notice there is an independent setting for an RTSP proxy but we don't have this.
Not that ut helps but our XP machines are setup for the proxy and they're QT streaming is fine.
Cheers

Sorted, had to type the name of the server that i wanted to bypass the proxy in the text box under the prefs.

SMQ2 Inbound Blocked Queues Due to UoM.

Dear Experts,
We sustain a number of materials in ECC with order unit TN (Tonnes) and are really causing issues because as the particular supplier delivers in KG's.
I.e....
•We order 0.100 TN (100kgs) of a Metal Sheet from a supplier
•They deliver us 100.123kgs
•Stock is receipted in EWM as 100.123kgs
•PO in ECC only allows 3 decimal places with Unit of Measure TN, so we can only have the PO as 0.100 TN, not 0.100123 that it should be...
•Receipt of the stock from EWM to ECC is then stuck in a queue because of this issue
•Stock cannot get booked in from EWM to ECC
•Stock cannot be backflushed when consumed in production
We need to raise PO's need in KGs. Contracts have been set up in Tonnes and will not allow us to select KGs as a UOM in the PO.
What best practices do you recommend here please?
ADP.

Hello Andriko,
It is always recommended to have same Unit of Measurement both in ECC and EWM.
Can you try maintaining Conversion in your Material master and try reprocess the queue in ECC.
Regards,
Sathish

Https blocked in all browsers

I just wiped my computer, and installed Mountain Lion 10.8.2. Https is blocked on all the browsers (Chrome, Firefox and Safari). When I go to a site, it tells me the certficate can't be authenticated, so I make an exception, but the site it self is screwy. I can not find any help on this, and I have no parental settings on this computer.

First, the process by which OS X checks the validity of root SSL certificates doesn't currently work behind an authenticating proxy, such as those used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.
Disable the built-in application firewall, if it's in use. If you're running a third-party firewall such as “LittleSnitch” or “Hands Off,” disable that. Test.
In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
Otherwise, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
If not, select Go ▹ Go to Folder from the Finder menu bar. Into the text box that opens, copy the following line of text:
/var/db/crls
From the folder that opens, move these two files to the Trash:
crlcache.db
ocspcache.db
You’ll be prompted for your administrator password when you do this. Then reboot, empty the Trash, and try again.

Tmg 2010 Block Any https web site

TMG 2010 block any https site And HTTPS Inspection Disabled when i make a Rule and i make TO Exception URL sets.

HI Jesper
Thanks for Reply
Yes Https sites blocked even with https inspection disabled, and I have firewall policy that is allowing http and https.
If I make firewall policy allowing http and https without Exceptions traffic will be allowed If i make any URL sets Exceptions traffic will be blocked.
Regards,
Ahmed Salama.
Denied Connection
Log type:
Web Proxy (Forward)
Status:
12202 Forefront TMG denied the specified Uniform Resource Locator (URL).
Rule:
Default rule
Source:
Internal (10.6.29.199:65109)
Destination:
External (10.6.28.5:443)
Request:
twitter.com:443
Filter information:
Req ID: 0785b898; Compression: client=No, server=No, compress rate=0% decompress rate=0%
Protocol:
SSL-tunnel
Client agent:
Mozilla/5.0 (Windows NT 6.1; rv:30.0) Gecko/20100101 Firefox/30.0
Object source:
Internet (Source is the Internet. Object was added to the cache.)
Cache info:
0x0
Processing time:
0 MIME type:

HTTPS inbound blocked?

Similar Messages

Maybe you are looking for