HTTPS no longer works after iOS upgrade

Since upgrading to latest iOS (on march 5th, iPhone 5) Safari cannot connect to sites that use https.
There is no firewall setting I can change - is it certificate problem with all the sites?
No one else has this issue?

the time and date are set automatically by the network
if that was the issue all network users would have same issue
No one else is having this issue? It is definitely a result of the upgrade which 'fixes' issues in https authentication, right?
Apple techs? no help here?

Similar Messages

SD CARD READER NO LONGER WORKS after IOS upgrade. Help!

Does anyone have a suggestion as to how I can get my sd card reader working again? My generation 1 iPad worked fine with it until I updated to IOS5. Today was the first time trying to upload pics since the upgrade. Nothing. Not even an error message. I rebooted and still nothing. SoTHAT was $30 well spent. So now, in order to get the pics onto my iPad, I am sending the pics to myself from my HP laptop, opening the emails on the iPad, and saving from there. The card reader used to work great for pics and videos. Gotta love it when upgrades make so I can no longer do before the "improvements." I would just return the camera kit/card reader, but I purchased it a year ago, so that bird has flown. Suggestions?
Thanks in advance and Happy Holidays!
Scott in Barrington, Rhode Island

Harry Manko wrote:
Can we get Apple to fix this...PLEASE?
This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
http://www.apple.com/feedback

Home button on iPad2 no longer works after iOS 7 upgrade

I upgraded my iPad2 to iOS 7 today. The home button no longer works. I've powered it down and back up as well as restarted it but it's still not working. Any suggestion greatly appreciated.
About to fly to China and was looking forward to watching movies and reading on the long flight.
Thanks!

Hi SUSOA!
Try using the steps in the following article to address this issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

VPN no longer working after iOS 8.0.2 upgrade

Hello, after the upgrade to iOS 8.0.2 we have some problems with VPN.
The connection runs always stable and we don't change anything on our infrastructure.
But since the upgrade the IPads/Phones always show the notification "could not connect the server"or else.
This could not be true. The server is available from other clients (not ios). We test it with Wlan and 3G like always before.
I heard that we should delete the VPN profile and create it new on the ipad but it don't solve the problem.
We use IPSEK with IKEv1 and a PSK.
Are there any changes on the ios VPN client??!
I hope you can help me.
THX

Yes, same problem here. Tested on both 8.0 and 8.0.2. VPN will connect but will not pass traffic from the idevice into the network. I am able to ping the device from inside of my network to its VPN IP address. However, I am not able to get to any internal resources from the device. I have done some of the troubleshooting that is posted above with no success. I have rebooted the device, reset network settings, and I have reset the entire device. I'm testing on an iPhone 5 and an iPad2. I also have an iPhone 4s here that is still on IOS 7 that has a working VPN and can connect to all internal resources as normal. I contacted Apple support yesterday and after speaking with 2-3 people, all of whom acted like this was the first VPN issue they had ever heard about, I was told that a "Senior Support Agent" would contact me back. Right now I have 5 users affected by this issue. Those 5 people will have new Android devices before the End of the day. I have sent an email to the other 60+ IOS users instructing them NOT to update their device until the VPN issue is resolved. I will post any findings here including the phone number and extension of the Apple Support Personnel that I spoke with yesterday if I do not get contacted in a timely fashion. I can understand that a mistake has been made, but this issue is wide-spread and needs to be addressed.

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Printing No Longer Working After Recent Upgrade

My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4).
I discovered that arch is no longer auto-loading the parport_pc module. This is strange. If I run "hwdetect --show-modules", parport_pc is shown.
I do have MOD_AUTOLOAD="yes" in my rc.conf file.
The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
Are others having this problem?
Rob

I just read your post. I am sorry I could not join irc. I was actually at work. It is very hard for me to use irc at work. Firewalls make life difficult!
In any event, I think I solved the problem.
Please see http://bbs.archlinux.org/viewtopic.php?t=18747
Here is the complete post:
In my /etc/modprobe.conf file, there was the folloiwng line:
# Load lp support with parport_pc
install parport_pc modprobe -i parport_pc ; modprobe lp ; true
I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
The following are the remaining lines in my /etc/modprobe.conf:
# Load ppp-generic with modem drivers
install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
install slamr modprobe -i slamr ; modprobe ppp-generic ; true
install slusb modprobe -i slusb ; modprobe ppp-generic ; true
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
options isapnp=0 dma1=1 dma2=0 irq=5
# --- END: Generated by ALSACONF, do not edit. ---
The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
Should I also comment them all out?
Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
Rob

ITunes no longer working after Song Upgrade.

I got onto iTunes store, was offered to upgrade 32 of my songs, I said "Yes". After the upgrading completed, iTunes main window pane no longer worked for anything but the iTunes store. It will play my music if I manually select it from the disk (via Finder) but does not seem to be able to display any of my playlists or my music library.
I am running Safari 3.0 (as an FYI).
Mac OS X 10.4.9 (on an intel mini).

Unfortunately uninstalling and reinstalling, or repairing the current copy of iTunes alone doesn't fix the problem....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

IPad messages no longer works after ios7 upgrade

After upgrading to ios7 on my iPad messages no longer works.
After I enter To: I am unable to get to the message field to enter the message.
Reboot does not solve the issue,

This issue has been resolved!

Flashcards for screen brightness no longer work after BIOS upgrade

I have a Toshiba Satellite T135D/1320S laptop, and last night I upgraded the BIOS to v1.90 under the recently released recall notice. AFter installing the BIOS, however, the Flashcard brightness controls no longer work. Whenever I press FN-6 or FN-7, the screen brightness Flashcard pops up and the toggle on the slider bar moves back and forth, but the brightness of the screen does not change.
I have disabled and re-enabled the Flashcards as suggested in a separate forum, and I've also downloaded the most recent display driver (AMD display driver v8.615). Neither effort corrected the problem.
Anyone have any other suggestions?

Satellite T135D-S1320
Sometimes it helps to reset the machine. With the battery and AC adapter removed, close the Power switch for half-a-minute. Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
Another things to try is reinstalling the TVAP.
Toshiba Value Added Package for Windows 7 (64)
-Jerry

Password doesn't work after iOS upgrade

I upgraded my iPad to the latest iOS version, and now my password to unlock it no longer works. Has anyone else had this problem? How do I unlock it now?

BTW, correct password hint is there, just doesn't access computer.

Shortcuts for messages don't work after iOS upgrade

After having upgraded to the most recent iOS, my shortcuts don't work in messages and mails anymore. Has anyone else had the same experience?

Well, it's telling you that the datset doesn't exist. From the help in 4.7:
OPEN DATASET
Addition 1a
... FOR INPUT
Effect
OPEN ... FOR INPUT opens the file in read mode.
If the file does not exist, OPEN ... FOR INPUT fails with Return Code SY-SUBRC = 8.
Note
If OPEN DATASET is not executed in a Unicode program and if the user has write authorization for the file, the file is opened in read and write mode. Otherwise, it is only opened in read mode.
Rob

Voice memo on iPhone 4 no longer works after iOS 6 update.

Since updating to iOS 6, voice memo no longer works. It kills itself upon launch. If it doesn't do it automatically, it does it once I hit any of the buttons in it (i.e. record). I've tried hard reset and regular restart. Haven't tried restoring because I noticed it on my way to work.
Anyone else have this problem?

I went to Apple and they helped me restore my phone to see if that would solve the problem and it did. Essentially restoring wipes your phone and you start from scratch. I was able to "restore from backup" and so I didn't lose anything.

IPad 2 hdmi to tv no longer working after ios8 upgrade?

Hi,
Would anyone know why my hdmi to TV cable is no longer supported after upgrading to ios8 please?
When connected, the system states that the device is not supported but was fine with ios7.
Hopefully this is a bug but if not, feel reluctant to update ever again!
Thank you in advance..Neil.

Hi,
Would anyone know why my hdmi to TV cable is no longer supported after upgrading to ios8 please?
When connected, the system states that the device is not supported but was fine with ios7.
Hopefully this is a bug but if not, feel reluctant to update ever again!
Thank you in advance..Neil.

My car dock is no longer working after iOS 4.3.2 update...help!!

I have an after market car dock that normally plays music through my car speakers and charges my iphone. After the most recent iOS update it still charges but does not play music. Any ideas?

Sometimes after iOS updates older tech or even off brand tech may not be supported. I use an older Griffin car charger with an iPhone & iPad and it won't charge because it is not supported. Maybe get a new dock or an Apple approved product, it kinda irritates me as well not being able to use off brand tech. Its cheaper than brand name products...
Hope this helped

HTTPS no longer works after iOS upgrade

Similar Messages

Maybe you are looking for