HTTPS not functioning

We have two content switches on top of two webservers .There is a roundrobing load balancing configuration.
We were wrking fine with htttp and https access to the webserver fromthe internet while on a trial SSL certificate .
Now we have installed a permanent SSL certificate 2 years) and have started facing a problem while accessing the https.
Can anyone proovide any leads
Shiva

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

Similar Messages

Bridge not functioning in PhotoShop CS3 Extended

I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer. I activiated CS3 on the new computer. However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

Thanks, that worked.
In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bridge not functioning in PhotoShop CS3 Extended
created by Curt Y (http://forums.adobe.com/people/Curt+Y) in Bridge
Windows - View the full discussion
(http://forums.adobe.com/message/4107610#4107610)

Fairly certain that FileStream.writeObject() and FileStream.readObject() do not function - at all -.

I've struggled with this since Jan 9th, 2013 (if not longer) and the only conclusion I can come to is that this simply does not function. No matter what I try and no matter what resource (and I'm finding precious few) I follow to try to implement this within Flash Builder 4.7, Flex SDK 4.6.0 (Build 23201), AIR SDK 3.5, I only succeed in creating a file (with the correct name) that is 123 bytes in size that reads back in as NULL;
I've tried using ByteArray.writeObject()/readObject() as an intermediary with FileStream.writeBytes()/readBytes(), with no luck.
I've tried instantiating an object, setting properties and then using that. I've tried instantiating my correctly formed ValueObject (including the remoteClass alias metadata tag).
I've tried using -verbatim- the example provided in the top most suggested 'Community Help' resource http://www.switchonthecode.com/tutorials/adobe-air-and-flex-saving-serialized-objects-to-f ile It is worth noting that this solitary example of the procedure/SDK-usage is dated to Flex SDK 3.0 and at least 04/04/2009 (first comment on the article).
My frustrating hell (one version of many methods attempted) is detailed on StackOverflow (including -all- mxml, as, and trace output), but so far, no assistance has been forthcoming, alas. This is a severely stripped down and simplified version of what had been a far more complex attempt:
http://stackoverflow.com/questions/14366911/flex-air-actionscript-mobile-file-writeobject- readobject-always-generates-null-w
An earlier post* detailing a far more complex attempt interation, with, alas, just as little help (guess this isn't a hot button topic) forthcoming:
http://stackoverflow.com/questions/14259393/flex-actionscript3-filestream-writeobject-fail s-silently-in-ios-what-am-i-doin
* I previously suspected that it was only failing from within iOS on an iPad, but the first example (the stripped down version) made it evident that it didn't work in the AIR mobile device simulator (iPad) in the Windows environment, and indeed, didn't work in a non-mobile project in the windows environment AIR launcher.
I'm at a loss, upset, frustrated, in major trouble with my supervisor/deadlines, etc.
I would very much appreciate any suggestions/help/confirmation/etc.
Just to move ahead with development I've opted for a far less preferable solution of writing out both an XML file and a JPG file. I very much do not like this and very much want to store encapsulated serialized objects locally in the same way I assume will work for storing remotely with AMFPHP (if the project ever gets to that point *sigh*).
Again. Would be so grateful for any help.

I want to add to this post as I marked it as "The Answer" though it does not indeed contain the answer directly, for those who come looking for simliar solutions.
harUI prompted me to realize that my metadata term needed to be capitalized (RemoteClass instead of remoteClass). As the metadata tags may be user defined, the compiler throws no errors (or warnings *grumble*)
package vo
    import flash.display.BitmapData;
   // [remoteClass(alias="PTotmImageVO")] incorrect
   [RemoteClass(alias="PTotmImageVO")]
    public class PTotmImageVO

On a wireless network test report, I get "The wireless radio is not functioning."

The printer is a Photosmart C309a all-in-one. I've used this printer for some time and did so wirelessly earlier today. Upon ordering a print job the printer failed to produce results. I ran a Network Configuration Page where it showed the printer to be offline with no Active Connection Type. I then ran a Wireless Network Test report and received the message: "The wireless radio is not functioning. Contact HP Support." IS THERE A FIX FOR THIS?
I reinstalled the printer software on my computer configuring it with a USB connection, in order to be able to use the printer. I was able to use it with the USB connection but would most definitely prefer a wireless connection. I also turned off the printer, router and computer and turned them on in the order outlined in the user's manual, but to no avail. This, of course, I did before reinstalling the software for a USB connection.

Hi,
I afraid the error indicate an an hardware failure..
You may try using a wired ethernet cable as a workaround, the printer will need to be services in order to repair its wireless card.
You may find the details to contact HP support by selecting your region and following Technical Support after you buy:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My hp c4795 cannot set up wirelessly. it says the wireless radio is not functioning. how do i fix

my HP C4795 wireless printer
using widows 7
the wireless radio is not functioning. contact HP customer support
first time trying to set up wireless

Hi,
As it said, you can click the "Contact HP" above or use the following link:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Wireless test report states that wireless radio is not functioning - contact HP support. Who/how do

C309a printer
Wireless network test report states wireless radio is not functioning. Contact HP support. How/who do I contact?

Hi,
You may find the local HP Support Center phone number listed below:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can not drag files off iphone onto windows 7 Laptop (Error: A device attached to the system is not functioning!) Any ideas on how to resolve this, Much appreciated

Connect phone to laptop, AutoPlay Box appears, click open Device to view files, internal storage, DCIM, Drag all Pictures/Videos into folder on desktop. Message pops up within a few seconds, Saying 'A Device Attached To The System Is Not Functioning.'
Can any be of assistance?
Many Thanks.
Callum.

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

On a Windows 2008 R2 server that had been working fine, all of a sudden some shared folders became inaccessible. Clicking on them returned the following: "<Folder> is not accessible. You might not have permission to use this network
resource. A device attached to the system is not functioning."
If I create another share with a different name for that same folder, it works fine. If I delete the original share then recreate it with the same name, I get the same error. However, if I right click on the problematic share and select 'map
network drive' that works. So this would not appear to be a permission issue.
I discovered this problem because the path for mapping the home folder as a property of their AD account stopped working.
I have tried most of the common things found on the internet. I've tried accessing via IP, same issue. While I only have a couple 2003 servers, those can access this resource.
At this point, I'm pretty much out of ideas. Any help would be appreciated. I also have some reports of potential issues with some printer mappings too which I will have to investigate in the morning.
If anyone has a solution to this I would be extremely grateful. Thank you.

Hi,
Can you access the shard folder locally? Is a specific server cannot access the shared folder? Please try to Boot your server in Clean Mode to check if some third-party software cause the issue.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Communication problems: A device attached to the system is not functioning.

Hi all,
I'm developing an applet and using the OMNIKEY 5321 CL reader for communication and testing. One of the requirements for our card is to read large binary data.
For this purpose i used extented lenght APDU to read the data from card.
When I tested it via JCOP simulation I was able to read up to 32767 bytes as described in specification. But problem occurs when I test it with reader, in this case I'm able to read max 298B in APDU response. When I send greater byte count than 298B i have got following error in JCShell plugin:
jcshell: requestSessionKey.jcsh[1]: Error code: -6 (Card terminal error)
jcshell: requestSessionKey.jcsh[1]: Communication problems: A device attached to the system is not functioning.
Regarding the extend lengh APDU support it should by OK from the OMNIKEY. I'm using newest driver 1.2.9.2 for Win 7.
Here my configuration:
JCOP:JCOP 2.4.2r1
JAVA CARD: jc301
Global Platform: gp22
Can somebody help me? Any ideas?

If you want to use PC/SC directly, I have a simple Go program that reads an APDU file (just hex encoded APDU strings) and sends them to a smart card. You can give that a try if you like.
The code is at: https://bitbucket.org/safarmer/go-apdus
There is a Goclipse project as well as the source. You will need to install Go and run "go get github.com/ebfe/go.pcsclite/scard" to install the required PC/SC wrapper. Once you have done this you can run the program with -file <apth to text file>
An example text file:
# A comment that is ignored
00a4040000
80ca9f7f00- Shane

"A device attached to the system is not functioning"

Hi!
I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
* The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
* The document is saved from a database to the user's disk
* Using a shell command, the application asks windows to open that file.
Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
Any and all help is appreciated.
Thanks!
Louis

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

Officejet Pro 8500 A909g (all in one) wireless radio not functioning

Ran network test report and received an Error message: Officejet Pro 8500 A909g (all in one) wireless radio not functioning.
the menu screen says its on and the blue light is on, but no connection.
Appears to be a hardware problem, any ideas.
Thanks

Hello Minabird4
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your wireless radio is not working on your HP Officejet 8500. This could be a hardware issue if the wireless card has failed completely, but I would like you to try the HP Support document: Performing a Partial Reset of the All-in-One. If resetting the printer as the document gets you to do does not fix the issue, it would be recommended that you contacted HP technical support for repair options.
US support link to contact options for laptops purchased in the US.
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&lc=en
Outside of US support link to contact options for laptops purchased outside the US.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

I need help with deactivation.
I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Drop Down Menu not functioning

I'm very VERY new to dreamweaver/fireworks but have been making small changes to multipul websites for a company. They have asked me to come up with a totally new design for their primary webpage and I'm having an issue with the drop-down menu.
I'm created the menu in fireworks using the hotspot tool and it "previews" just fine in both fireworks and dreamweaver. I went through the export process in fireworks and exported the hotspots/images and html code into my primary folder for the website. I pasted the html-code in the location that I wanted on the webpage.
When I upload the page and go to view it the drop-down-menu does not function properly. I have to add an <div> after my .jpg banner for the images of the dropdown to appear. Even then the pull-down-menu does not show up properly.
*Side note* the page also loads VERY SLOWLY now, not sure why. In an attempt to start over I access the "remote view" of the webpage through dreamweaver and deleted all but the "Admin" folder which it did not allow me to delete? Did I majorly mess something up here?
I'm also attachin and image that is a screenshot of what the menu/root folder looks like in dreamweaver
www.greatermichiganpmc.org <--page
Code for drop-down:
<div id="container">
<div id="header">
    <div align="center">
      <p align="center">
        
        <img src="index-banner.jpg" width="700" height="223" /></p>
      <div id="FWTableContainer1508856550"> <img name="indexpulldown" src="indexpulldown.gif" width="699" height="32" border="0" id="indexpulldown" usemap="#m_indexpulldown" alt="" />
          <map name="m_indexpulldown" id="m_indexpulldown">
            <area shape="rect" coords="601,6,691,26" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133643_0', 'MMMenu0914133643_0',601,26,'indexpulldown');" />
            <area shape="rect" coords="503,6,593,26" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133421_1', 'MMMenu0914133421_1',503,26,'indexpulldown');" />
            <area shape="rect" coords="404,6,493,28" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133324_2', 'MMMenu0914133324_2',404,28,'indexpulldown');" />
            <area shape="rect" coords="304,6,394,26" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133237_3', 'MMMenu0914133237_3',304,26,'indexpulldown');" />
            <area shape="rect" coords="206,6,295,28" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133022_0', 'MMMenu0914133022_0',206,28,'indexpulldown');" />
            <area shape="rect" coords="106,6,196,26" href="http://www.greatermichiganpmc.org/news.html" alt="" />
            <area shape="rect" coords="6,6,97,28" href="http://www.greatermichiganpmc.org" alt="" />
          </map>
          <div id="MMMenuContainer0914133643_0">
            <div id="MMMenu0914133643_0" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/uastar.html" id="MMMenu0914133643_0_Item_0" class="MMMIFVStyleMMMenu0914133643_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133643_0');"> UA Star </a> <a href="http://greatermichiganpmc.org/uatraining.html" id="MMMenu0914133643_0_Item_1" class="MMMIVStyleMMMenu0914133643_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133643_0');"> UA Training </a> </div>
          </div>
        <div id="MMMenuContainer0914133421_1">
            <div id="MMMenu0914133421_1" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/links.html" id="MMMenu0914133421_1_Item_0" class="MMMIFVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> Links </a> <a href="http://www.greatermichiganpmc.org/buyersguide.html" id="MMMenu0914133421_1_Item_1" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> Buyer's Guide </a> <a href="http://www.greatermichiganpmc.org/career.html" id="MMMenu0914133421_1_Item_2" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> A Career </a> <a href="http://www.greatermichiganpmc.org/training.html" id="MMMenu0914133421_1_Item_3" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> Training </a> <a href="http://www.mitripartite.com/survey.htm" id="MMMenu0914133421_1_Item_4" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> MTC Survey </a> </div>
        </div>
        <div id="MMMenuContainer0914133324_2">
            <div id="MMMenu0914133324_2" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/officers.html" id="MMMenu0914133324_2_Item_0" class="MMMIFVStyleMMMenu0914133324_2" onmouseover="MM_menuOverMenuItem('MMMenu0914133324_2');"> Officers </a> <a href="http://www.greatermichiganpmc.org/members.html" id="MMMenu0914133324_2_Item_1" class="MMMIVStyleMMMenu0914133324_2" onmouseover="MM_menuOverMenuItem('MMMenu0914133324_2');"> Members </a> </div>
        </div>
        <div id="MMMenuContainer0914133237_3">
            <div id="MMMenu0914133237_3" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/meetings.html" id="MMMenu0914133237_3_Item_0" class="MMMIFVStyleMMMenu0914133237_3" onmouseover="MM_menuOverMenuItem('MMMenu0914133237_3');"> Meetings </a> <a href="http://www.greatermichiganpmc.org/community.html" id="MMMenu0914133237_3_Item_1" class="MMMIVStyleMMMenu0914133237_3" onmouseover="MM_menuOverMenuItem('MMMenu0914133237_3');"> Community </a> </div>
        </div>
        <div id="MMMenuContainer0914133022_0">
            <div id="MMMenu0914133022_0" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/tsr.html" id="MMMenu0914133022_0_Item_0" class="MMMIFVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> TSR </a> <a href="http://www.greatermichiganpmc.org/histroy.html" id="MMMenu0914133022_0_Item_1" class="MMMIVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> History </a> <a href="http://www.greatermichiganpmc.org/staff.html" id="MMMenu0914133022_0_Item_2" class="MMMIVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> Staff </a> <a href="http://www.greatermichiganpmc.org/awards.html" id="MMMenu0914133022_0_Item_3" class="MMMIVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> Awards </a> </div>
        </div>
      </div>
    </div>
</div>
<div id="sidebar1">
    <h3><img src="index-side.jpg" width="200" height="581" /></h3>
</div>
Any and all help is appreciated. Thank you in advance

Firstly, the link to the imported stylesheet is wrong - it appears to be pointing to your hard drive: that needs to be fixed and if it relates to the menu, likely the reason why the menu isn't visible.
@import url("../../../../../../../../S|/All Users Documents/Graphics/Chris/Greater Michigan PMC/indexpulldown.css");
Are you working in a defined DW site? It's very important that you are - it's the way that DW keeps track of all the links and paths.
Define a site:
http://kb2.adobe.com/cps/140/tn_14028.html
Next: Those FWs exported dropdowns are atrocious, there was a reason the functionality was removed from the latest FWs and DW.   Even though a CSS version is available, it may be ok to use for protyping for certainly not for live production sites.
POP UP MENUS - why not to use them:
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
http://apptools.com/rants/jsmenu.php
http://apptools.com/rants/menus.php
There are much better ways to build a dropdown menu, one of them is the Spry Menu available in CS3 and CS4. They too, can cause issues, but at least the links throughout your site are inside the html code, not in the javascript.
Spry Menus: - already included with CS4
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS8B985763-4DFA-4415-B242-B2C 2D7DED657a.html
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt5_03.html
Better Ways to create CSS dropdown menus (user friendly and search engine friendly):
CSS Dropdown menus by Suckerfish:
http://www.htmldog.com/articles/suckerfish/dropdowns/
As for this:
*Side note* the page also loads VERY SLOWLY
now, not sure why. In an attempt to start over I access the "remote
view" of the webpage through dreamweaver and deleted all but the
"Admin" folder which it did not allow me to delete? Did I majorly mess
something up here?
I'm not really sure what you mean and which folders you deleted from where ;-)

Virtual op amps CC does not function.

Problem Description :
The virtual op amps do not function properly. I entered the parameters for the Max9910 op amp to check the GBW product. I had to increase the Fu to 2x the stated value.
The Compensation Capacitance value has not effect on the simulation.
Also, please define the (VSW+) and (VSW-) parameters in the virtual model?
Steps To Reproduce :
See attached file
Workaround :
Trying to use an op amp model Max494 and change the model parameters to match the Max 9910 opamp, but I do not know which parameters to change for Fu?
What
are G1, G2, and G3? R1, R2, and R3? Max494 spice model model is below.
* EWB Version 4 - 3 Terminal Opamp Model
* A= 251188 RI= 3e+006 RO= 1000 VSW+= 6.85 VSW-= -20
* Vos= 0.0002 Ibs= 2.5e-008 Ios= 5e-010 SR+= 200000
* fu= 500000 fp2= 1e+032 CC= 3.9e-011
Vos 4 1 DC 0.0002V
Ib1 4 0 2.525e-008A
Ib2 2 0 2.475e-008A
G1 0 5 4 2 0.0630957
G2 0 6 5 0 0.0630957
G3 0 3 6 0 0.0630957
Ri 4 2 3e+006ohm
R1 5 0 1000ohm
R2 6 0 1000ohm
R3 3 0 1000ohm
C1 5 0 7.99556e-005
C2 6 0 1.59155e-036
Cc 5 0 3.9e-011

What i see is a differentiated waveform on the output of the first circuit when I get it working. This tells me that there is a capacitor in the circuit creating this waveform and most likely it is across the feedback resistor. You have to take into consideration that these are perfect models with no parasitic capacitance modelled with in them and you have no other capacitance in your circuit Also you are applying a square wave to this op amp and the compensation capacitor, with no other capacitance in the circuit, is causing the output waveform to differentiate.
It seem to be there and is working, but not maybe the way you would want it to.
Anyway, I would like to hear form NI and see what they think about both of these situations when it comes to the virtual op-amps
Message Edited by lacy on 12-15-2007 11:28 AM
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

After loading FF4 the back/forth buttons are visible but not functional. Have tried to reset tool bar etc. no luck. fix please

After upgrading to the new version everything seems to work well except my back/forth button on the browser are visible but grayed out and not functional. I have tried all of the suggestions in help and am unable to bring them to life. Very frustrating to use a browser with out these functions. I run 4 websites and it is maddening to have to keep reloading the sites just for simple work.
I have to have these working or will be forced to use another browser. I liked the old FF much better. I can not tolerate this much longer.

I notice from your system specs that you're running a very old version of Flash. Could you try updating to the latest one which is 10.2.159.1 It also contains a patch to fix a recently discovered [http://www.h-online.com/security/news/item/Adobe-releases-security-update-for-Flash-Player-1228930.html Zero Day exploit]. You can get it from here: http://get.adobe.com/flashplayer/
Have you experienced any unusual events watching Flash videos lately? It's possible that you may have been a victim of just such an attack. It might be worth doing a malware scan using this well-known scanner from http://www.malwarebytes.org/ The free version is more than adequate to eliminate any current threats.

HTTPS not functioning

Similar Messages

Maybe you are looking for