HTTPS port Active in CRM server
Hi All,
Our client wanted to do SAP CRM and Outlook integration. for the same they required HTTPS port to be opened and activated......
Presently we can not proceed with issuing certificate on SAP Web Application Server, since there is no option on SAP server to integrate this certificate.
Please let us know whether SAP Cryptographic Software is required for above said setting or we can do the above setting without SAP Cryptographic Software .........
Thanks & Regards,
Raj
Hi Raj
For an HTTPS port to be opened and activated, the SAP Cryptographic Software installation is a requirement.
What you can do is , install the SAP Cryptographic software from the following links:
http://help.sap.com/saphelp_nwce10/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
and
http://help.sap.com/saphelp_nw70/helpdata/en/ca/cbca6b937ea344a9a3be78a128a803/content.htm
Now, try to open the port for HTTPS and add the parameters to SMICM
Then go to MS Outlook CRM Calendar Sync. Tool Options and add the HTTPS port info in the host name field.
I hope this helps
Regards
Chen
Similar Messages
-
Adobe form is not activating in CRM Server
Hi,
if i try to activate Form in CRM, is not activating and it is showing below message on statusbar.
SOAP Framework Error:Soap Runtime Exceptiion:CSoap Exception fault;Soap fault in Soap Document:User ADS2ABAP does not have access to method rpData\<...............
Can anybody tell me what is the problem.
In Ecc it is working fine.
Regards,
neelamSet up the environment variable FORMS_PATH to point to the directory where you store your forms and then always call forms with there names not including the path.
-
Two http ports - one in 8080 and the other one in 3034 - How to remove 8080
Hi!
I have two http ports - one in 8080 and the other one in 3034 - How to remove 8080.
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<ip address>)(PORT=<port number>)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<hotname>)(PORT=3034))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<hotname>)(PORT=2102))(Presentation=FTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<hotname>)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...You get check which is the current dedicated HTTP port by using DBMS_XDB.getHTTPPort(). There can be only HTTP port active per database (not taken into account the HTTPs one). If two or more exists than there is still a process claiming that port (in this case 8080). It will be cleaned up after one or more processes are not claiming that port again. New connections will be redirected to the new port.
-
HTTPS port not activated on non-central Advanced Adapter Engine
Hello,
we have upgraded our non-central adapter engine from XI 3.0 to 7.1 EHP1.
Before, we were using port 58201 (5<InstanceID>01) for HTTPS and it was working fine. On the new system, the port 58201 isn't active, which I've checked with 'telnet <host> 58201'.
On XI 3.0, the port could be configured in the Visual Admin -> SSL Provider, but I don't find the corresponding setting in NWA.
I've already checked miscellaneous SAP notes (856597, 891877,...), HowTo-Guides and Blogs, but didn't find any hint...
Any idea, where I could edit the HTTPS port in NWA of the non-central adapter engine?
Thanks,
JuergenHello,
I didn't get access to ExchangeProfile over URL http://<host>:<port>/exchangeProfile and didn't find the settings in NWA.
Reason was the missing CryptoLibrary as discribed on http://help.sap.com/saphelp_nwpi711/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Regards,
Juergen -
Redirect attachment to other https port on same server
Hi
I want the EBP attachments to be redirected to the other port on the same server. Can you please provide some inputs on this?
Regards
RajeevHi,
See these related threads;
redirect the shopping cart attachment from ebp doc server to file net serve
reroute the attachment from ebp doc server to ex file server (File net)
BR,
Disha.
Do reward points for useful answers. -
Can the CIM server listen on the HTTPS port 5989?
In the man page of init.wbem it is mentioned that it starts or stops the CIM boot manager.And at startup, the CIM Object Manger Listens for RMI connections on RMI port 5987 and for XML/HTTP connections on HTTP port 5988.
But 5988 is not the secured port and I want the CIMOM to listen on the secured port 5989. CAn we change its configuration to listen on the HTTPS port 5989? and if so how can it be done?
ThanksThe current version of the Solaris CIMOM doesn't support https, which is usually found on port 5989.
-
Dear All,
We are planning to implement Groupware integration in our CRM production system. Is it necessary to have CRM server and Exchange server in the same domain ? Please suggest us .
Thanks
RajHi All,
I have installed GW connector in the same server where CRM is running. The GW connector services in the services.msc is running fine and i have configured for MAPBOX in the portal system . The MAPBOX RFC is also working fine in crmabap system(backend) . MS Exchange server is running in the different box but in the same domain. In short the backend system, Portal system,Exchange server all in same domain.
Testing strategy : Client needs a mail of the activity ( meeting, order ...) in his outlook once they create the same in Portal system.
But it's not happening.
Scot - Mail configuration has been done and while doing GW adaptor configuration in tcode " CRM_EMAIL_OUTLOOK" , it generates a URL ...(result of the tcode )
Copy the following URL and assign it to the required Microsoft Outlook
folder:
o Open the folder context menu
o Choose "Properties"
o Choose "Homepage"
o Insert the URL
o Set the flag "Show homepage by default for this folder"
URL:
http://<FQDN>:<PORT>/sap/bc/bsp/sap/crm_gw_integ/gw_int
egration.do?meth=outlook&sap-client=200&sap-language=E
Where i need to assign this URL ? In Outlook folder of each customer system PC ?
Please help me to resolve this issue. Let me know if you need any inputs from me.
Thanks
Raj -
GWIA not listening on HTTP port
I recently upgraded our GW8 to new hardware and eventually to 2012 sp1, now I'm seeing the following error in the GWIA log and the GWIA is not listening on its http port.
There is nothing listening on 9850 (default http port for gwia).
****** 04-10-13 10:03:39 ******
10:03:39 F476 ****************** Agent Restarted ******************
10:03:39 F476 MTP: Message Transfer Protocol initialization...
10:03:39 F476 MTP: Queue initialization...
10:03:39 F476 MTP: Queue initialization...
10:03:39 F476 Startup: No frgnames.cfg file found.
10:03:39 F3C7 Starting GWHTTP-Listener
10:03:39 F476 HTTP server running
10:03:40 F476 Error Listen Port is already in use. [856A]
10:03:41 F476 Shutdown of Threads
10:03:42 F476 Shutdown of Threads
After disabling GWIA POP / IMAP / LDAP (setting them to port 0) I'm getting the following(and still no http):
10:08:12 F476 ****************** Agent Restarted ******************
10:08:12 F476 MTP: Message Transfer Protocol initialization...
10:08:12 F476 MTP: Queue initialization...
10:08:12 F476 MTP: Queue initialization...
10:08:12 F476 Startup: No frgnames.cfg file found.
10:08:12 F3E7 Starting GWHTTP-Listener
10:08:12 F476 HTTP server running
10:08:13 F476 Error, Internal Udp Port is unusable. [8911]
10:08:14 F476 Shutdown of Threads
10:08:15 F476 Shutdown of Threads
GWIA is listening on the following ports, 1.2.3.4 being the server ip and I removed the POA connections.
# netstat -pan | grep -i gwia
tcp 0 0 1.2.3.4:7060 0.0.0.0:* LISTEN 12253/gwia
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 12253/gwia
udp 0 0 0.0.0.0:41547 0.0.0.0:* 12253/gwia
Any ideas ?
Besides this GW is running just fine.Originally Posted by laurabuckley
Oh ok.
Check to see if the firewall is disabled on the server.
Also, set an HTTP username and password in ConsoleOne then do a full stop and start of GWIA.
Please post back your results.
Cheers,
Hi Laura,
The firewall is disabled (double checked), there is a http username and password (re-set it) set in C1, a full stop and start did not make a difference.
Originally Posted by laurabuckley
One more thing.... if your POA is running on the same box try disabling POP and IMAP on the POA - restart the POA and GWIA.
Cheers,
We're actively using the POA IMAP so that's not something I can disable.
Thanks,
Arjan -
ECC6 integrated ITS default port 8000 changed to http port 80
We want the ECC6 integrated ITS default port 8000 changed to http port 80. The integrated ITS Cat2 transaction is currently working on http port 8000. I changed the icm/server_port_0(Instance Profile) and the ICM Monitor Active Services(smicm services) to use port 80. Cat2 transaction fails http fails after system restart. I have reverted back to 8000 and all is now working again. Is there more work that needs to be carried out or is port 80 is supported?
is your application server in domain?
if its in domain and when used sapides.<xxxx>.com if you get DNS not found, may be browser is looking up internet, put your domain in the exception in tools->internet options->connection->lan settings->proxy->advanced
"<i>This server does not support HTTPS! It is therefore potentially unsafe to send your password</i>" i just a warning message and you should still be able to log on.
(if you want to hide this info let me know)
<i>and i never could logon into R/3 !!</i>
do you also see a message that SSO2 is not configured? if yes follow the steps explained in OSS note no.517860
when you say never could logon what happens,
a) the field for user id pwd disabled? - click on the basic authentication button to get the log on pop up
b) error messages?
Regards
Raja -
Client installation is not successful & not showing activity in SCCM Server 2012
Environment : SCCM Server 2012 Configured successfull and installed clients using client push method , successfully Completed . I have seen Active, And push software to corresponding clients . installed successfully
We have internal & external networks in our environment . Internal network in data center , the sccm server is also in data center . All client systems is getting software's from sccm in internal network ( done successful) .
i have opened the ports in firewall 135,139,80,443,445, etc (TCP,UDP)
When iam trying to push the client from SCCM server to external network client system. it is not installing the Ccm setup ,
not showing "Active" in SCCM server .
I have added a Account in Client push , Same account i added in Client system Administrator group .
Info : All systems in Device collection
please updated the suggestions, to solve this issue .
Thanks in advanceClient push requires more than just those handful of ports as it uses RPC and SMB to push the initial required files -- thus, you need to open the dynamic high ports required for RPC.
You can easily see this activity in the ccm.log.If you are unable/unwilling to open the RPC high ports, then you should choose an alertnate client install method.
Jason | http://blog.configmgrftw.com -
Log on ticket not activated on the server
Hi all
When i tried to test compont crm_ui_frame,using transaction code bsp_wd_cmpwd,it opens the url
Where in, i am not able to enter user name and password, those fields are gray out. System seeking the fallowing errors:
1) . sso log on not passable, log on ticket not activated on the server.
2).No switch to https occurred so it is not secure to send a password. for which i try to activated the profiles using transaction code:RZ10. the fallowing profiles are
Login/accept_sso2_ticket=1, login/create_sso2_ticket=2. While doing this i am getting errors, so i could not able to activate those profiles. The following errors are
E: login/accept_sso2_ticket not a logical value 1#.
W: unknown parameter. Start up/ trimming_propertics, a check cannot be performed.
W: unknown parameter. Start up/um/home, a check cannot be performed.
W: unknown parameter .start up / max_coches, a check cannot be performed.
E: jstart up/ instance_propertics file D:\usr\sap\c27\DVEBMGS00\J2EE\cluster\ instance.
E: Exe\j2ee.file D:\usr\sap\c27\DVEBMGS00\exe\ jcontrol.exe .does not exist.
Hence, please help me in this regards, and for your kind information, i have crm2007 and TREX servers both are on single machine, and i do have DNS server connected to my system.
Regards
padmarao.Hi,
>E: login/accept_sso2_ticket not a logical value 1#.
Check if the value is really "1" and not "1#".
I have these parameters set on my CRM 2007 system and the saplpgon ticket works fine.
>2).No switch to https occurred so it is not secure to send a password. f
You have to activate HTTPS for the ICM and you have to choose "Logon via HTTPS" for the
/sap/crm_logon service in SICF.
Regards,
Olivier -
How to find port number of message server
Hi All,
Is anyone there who could tell me how to find out port number of message server (Message Port)? I am defining new system in my SLD so I need port number of message server of the system that I am connecting to. Thanks in advance.
Best regardsHi,
Go to the index page of the url,
type http://hostname:http port in Internet browser.
for ex : if installation is done on system with IP 172.16.28.90
and your http port is 50000(depends on Central instance number,JCxx)
then type http://172.16.28.90:50000.
1.then go to system information tab in index page.
for the credentials asked,type,
user:administrator
password:master password given during installation.
then system information page opens,in the left corner top,you can find message server port.
reward points if helpful......... -
How to do Handshake with tired party(bank) HTTPS URL from SAP PI server
Dear Expert,
I have developed bunch of scenarios, all are synchronous ABAP proxy to HTTP_AAE with bank on PI 7.4(dual stack). Bank web server is HTTPS enabled server. Our ABAP developments are still in progress also we have few issue in connection from ECC to PI.but that is not the focus of discussion here.
we want to do the handshake to check the connectivity with bank on their HTTPS URL from PI. Bank has provided the privet key for SSL from their server and corresponding public key they have maintained on their server. I have imported the private key under NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12->select the SSL.p12 file->import , also I have selected the option to "Use SSL" in HTTP_AAE receiver communication channel and selected the corresponding entryin "keystore view" and "keystore entry". All these I have done in our DEV system, and we are trying to connect our PI dev to bank Dev server.
Questions
Is there any specific steps to do the handshake with third party HTTPS(bank in my case) server? if not, how can we just test the HTTPS connectivity by using the SSL private installed on our PI server, without running the complete scenarios. Our PI has been installed on UNIX, and "telnet https url 443" is working, as network team has opened the HTTPS port.
We have not enabled the SSL technically on our PI server, and we have not installed any generated certificate from our PI server. Moreover, we have not made our PI url as "https:hostname:port" as we just need to communicate with bank by using their private key. Do you guys think we should enable the SSL? if yes, please explain why.
What is the best practice to test the connection with third party having HTTPS URL? how can I just assure HTTPS communication is working fine, before testing my actual scenarios.
Thanks for helping always.
Regards,
FarhanHi Farhan,
Some part of the blog is applicable for sending HTTPS request to partners/third party (Receiver SOAP Adapter).
If banks certificates are already in trustedCA, then, can you check if it also imported under user PIISuser under Identity management in NWA. If above 2 steps are done then i think your are good to go. But be careful when you install certificate, it should be in proper order.
As you already mentioned, connectivity is already established and you are able to PIng/telnet from pi server, connectivity looks ok.
While sending request, if you are getting 401 unauthorized, below might be the reason -
1. Certificate not installed correctly or some missing steps
2. Partner or TP is not ready to receive it, some certificate issue in there side.
other than 401 means you are ok (As per certificate and Connectivity) - 403 and 500 errors are next stops.
403 - error because of encoding method.
500 - data issue.
Regards
Aashish Sinha -
i am deploying an oc4j application on release 2. but am not sure what is the oc4j http port from where i can access the web-site of the application deployed. also, what all configurations need to be done to make this work. in release 1, the server.xml, default-web-site.xml and data-sources.xml had to be edited. is it the same here or any other xml files need to be changed?
By default OC4J 9.0.2/9.0.3 is configured to listen for http requests at port 8888. Please look at http-web-site.xml.
regards
Debu -
Bw web report plugin http session hangs at the server side
Hi,
I am having problems when closing the browser of a BW web report. After I closed the browser by going File->close, I ran SM04 and found out the Plugin HTTP session hangs at the server side.
How can we terminate the Plugin HTTP session at the server side when user closes the internet browser?
I did implement a logoff function at my web template, if user clicks on the logoff, the Plugin HTTP session is terminated at server side correctly. But As you know, 50% of time user will close the report by closing the internet browser instead of clicking the logoff. That leaves lots of hanging Plugin HTTP sessions at our server side.
By the way, we actived our BEX service at the SICF.
Thanks for help!
JAHi
If you want to avoid a blank page with logoff button, add opener=0
<a href="<SAP_BW_URL CMD='LOG_OFF' ~command='logoff'
>" onClick="javascript:window.close(opener=0);">Log off</a>
If you want to close the session via X, use this code:
create a sapscript function
function closeSession()
logoff()
window.unload=CloseSession()
However, the Plugin HTTP session isn't killed.
Regards
Maybe you are looking for
-
Printing pdf files from commandline located on intranet ?
Hi, i'm able to print files from the commandline which are located on the file server using : acroRd32.exe /h /p file.pdf Now i want to print a pdf file which is located on the intranet , f.i. http://localhost/b.pdf . How can i do this ?? Regards Erw
-
How to export PDF in Adobe Reader with changed background
Hey Folks, I change background and text color by going to Preferences -> Accesebility and when I save the file with changed background it is still the old background. How to I save/export this PDF to have changed background? Thanks a lot! Krioni
-
Pre-order album via iPhone screws up iTunes navigation
This is a very specific bug, so I'm not holding my breath for any fixes soon. But here it goes: I pre-ordered an album through the iPhone. Now, whenever I launch the iTunes App, it will momentarily open the correct page, and then suddenly jump over u
-
Ipod classic will not sync. It freezes and says error message (-69)
I've tried to "restore" the factory settings. I've reset the IPOD, toggled the hold switch, checked for upgrades and nothing seems to work. It also makes a raspy clicking sound as soon as it is about to freeze up and continues to do so until I clos
-
Kernel Panic on PowerBook G4 12" 867 Mhz running Leopard 10.5.8
Hi I need help today I got (4) four Kernel Panic just surfing the net and or copying files ok this is my systems and the report Model: PowerBook6,1, BootROM 4.5.5f4, 1 processor, PowerPC G4 (3.3), 867 MHz, 1.12 GB Graphics: kHW_NVidiaGeForce4MXItem,