HU AND MATERIAL DOCUMENT LINK

Hi Experts
I have made a stock movement of a Handling Unit.
I have the material document, that has the movement between the storage locations and the material.
But where can i get which HU is involved in that movement?
Is there any function? I couldn't find a function or a table to link that information.
Points will be awarded.
Thank you very much
Francisco O.

The handling units informatiion is in table VEKP header and VEPO details. You can link one of these wih table LQUA (quant table) to get your needed values.
Amit G

Similar Messages

  • Table for PO order and material document link

    Hello,
    I want to extract PO order and respecitive material documents ( IR , GR docs.)
    Can you give table(s) names ?
    Thanks,
    Ishak

    Hi ,
    You can use 2LIS_02_ITM ,2LIS_02_SCL DataSource you also check the following DataSources
    2LIS_02_SCL Tables EKKO, EKBE, T001, T001W, EKET, EKPA.
    2LIS_02_HDR  Tables  EKKO, EKBE, T001, EKPA.
    2LIS_02_ITM Tables  EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
    2LIS_02_SCN  Tables  EKET, EKES, EKPO.
    2LIS_02_CGR  Tables  EKBE, EKES, EKPO.
    2LIS_02_SGR  Tables EKET, EKBE, KKPO
    Thanks
    REddy

  • Billing Document and Material Document Relation

    Dear all,
    i need to know about the relation between Billing document and Material document.
    Please let me know if there is any Function Module or Some View available to get these details.
    my only requirement is to get only Material document From Billing Document.
    Thanks In Advance.
    Pradeep.

    Hi
    So the material document should be linked to the delivery
    The document flow:
    Delivery->Outgoing moviment->Delivery->Bill->FI invoinces
    If you start from FI:
    - Get the bill number from header data: BKPF-AWKEY
    - get the delivery number from bill item VBRP-VGBEL
    - get the document flow for the delivery: VBFA: here you can find out the material document
    Max

  • Relation between goods receipt and material document number

    guyz!
    i got stuck up at one functional doubt. can any one say link between goods receipt and material document number. in other way, i wanted to know difference between these two i.e. goods receipt and material document number. or both are same.
    awaiting for reply
    manas

    Hi,
    Just have a look if this thread can solve ur problem.
    Re: display goods receipt
    Rgds,
    Prakash

  • PO print OUT And material Document Print Out is coming In English

    HI all.
    I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
    I'M taking PO and material Documents print outs  in Chinese Server log-in.
    even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
    At the Time Of PO creation the Communication Language is ZH(Chines)..
    I have read some related post even 89899..
    But I have not find solution
    plz help me.
    thanks and regards
    ramesh reddy.'

    Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
      Installation
    Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
    You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
    1. Entry by Application Group (on the left)
    2. SAP Frontend Components (on the right)
    3. SAPSPRINT (on the right)
    4. SAPSPRINT <Release> (on the right)
    5. SAPSPRINT <Release> (on the right)
    6. Win32 (on the right)
    Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
    Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
    We recommend that you set up the following options for the service in the Windows Service Control Manager:
    The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
    If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
    We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
    Also note further settings in accordance with Note 1069483.
    Settings
    You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
    You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
    All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • Need help abt Purchase order and material document number

    1)Is there any releation ship between Purchse order number and material document number?
    2) I found aBAPI to get the goods receipt details. That is BAPI_GOODSMVT_GETDETAIL. But it is excepting Material document number and material document year as input parameters.Is there any BAPI to get goods receipt details by using purchase order number?

    hi kiran
    check this thraed. this gives you relatinship between Purchse order number and material document number
    Retrieving Accounting Document number based on PO numbers
    BAPI to get goods receipt details by using purchase order number is
    BAPI_GOODSMVT_CREATE
    thanks
    Sachin

  • Table name and field name for accounting and material document in MM

    Hi
    Table name and field name for accounting and material document in MM
    how can we diffreentiate the accounting document in MIGO and MIRO ?

    Hi,
    For Goods reciept documents you can search from the tables  MKPF-Header: Material Document and MSEG-Document Segment: Material,
    and for Invoice documents you can search in  tables   BKPF-Accounting Document Header and BSEG-Accounting Document Segment.
    For differentiating the Accounting documents in MIRO and MIGO based on posting key and document types for GRN -document key is -WE and for MIRO document is -RE.......
    Hope this may help you.....................

  • Relation between Material Number and Material document Number.

    hi xperts,
         I want to Know Is there any Relation ship between the <b>Material Number</b> and <b>Material Document Number</b>.
      If So can i get any Tcodes to check them?
    Thanks in advance.
    Message was edited by:
            STALIN JOSEPH

    Hi,
      Thanks for your reply.
    I want to Load the Inventory Management Data into Business warehouse ,there the Only way i correlate the Data between is by taking some material Number.
    and Material Document.
    In step 1 i load Material Number data and step 2 i load material document data,so i want to make cure those two loads i load the same material numbers.
    Please help me to collerate between them.

  • Get Material Document Number and Material Document Year

    Hi everyone,
    Right now, i'm developed idoc program. I need material document number (MBLNR) and material document year (MJAHR).  I have information only BAPI2017_GM_HEAD_01 and BAPI2017_GM_ITEM_CREATE. Is there any FM to get this value ? Thank you
    Regards,
    Satria

    Ok, i will explain with more detail about my problem
    Here my pseudocode :
    -  Get data with type BAPI2017_GM_HEAD_01 from Idoc (let we say this X)
    -  Get data with type BAPI2017_GM_CODE from Idoc (let we say this Y)
    -  Get data with type BAPI2017_GM_ITEM_CREATE from IDoc (let we say this Z)
    -  IF Y-GM_CODE <> "06" THEN
           CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
               EXPORTING
                   GOODSMVT_HEADER = X
                   GOODSMVT_CODE     = Y
               TABLES
                    GOODSMVT_ITEM      = Z
       ELSE IF Y-GM_CODE = "06" THEN
           CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
                EXPORTING
                     MATERIALDOCUMENT = ???
                     MATDOCUMENTYEAR = ???
                    GOODSMVT_PSTNG_DATE = ???
    I know that material doc and mat doc year is in table MKPF. But the problem is they are  the primary key, so how i use X,Y,Z in select operation to MKPF? or is there another way using FM ? Thank you
    Regards,
    Satria

  • New document type for Physical and material documents

    All SAP Gurus,
    I have created new document type in OBF4.
    How to view that Document type in OMBT (number range for for Physical and material documents)
    Regards,

    Hi,
    on the menu bar of trxn  click "number range object" in that go into overview you will get number range object overview  of every documment type or else do shift F7.
    Regards,
    Archit

  • Link between Service Entry Sheet and Material Document

    Hi
    I am busy with developing a report where i am required to find the link between the Material Document and Service Entry Sheet. 
    I am aware that on the Purchase Order Data tab of the Material Document has the service entry sheet number and line item.  However the problem I have picked up here is in the event I create a Service Entry Sheet  with a service in line 1 and for some reason Delete that Line and then capture the service again, it is saved in table ESLL as line 2.  This is correct.  However when I have a look at the material document, it references it as line 1 of the service entry.  Is there any way to get this in sync?
    Thanks
    Vinesh

    Thanks
    This table does show the service entry sheet number and line item however the line item does not correspond with the line item on the service entry sheet.
    Eg.
    I create a service entry sheet where I capture a service in line 1.
    I delete Line 1
    I recapture on line 2.
    Post Service Entry
    The Material Doc reference document is the service entry however the line item for the reference is 1.
    I need to try and link the line items
    Thanks
    Vinesh

  • Establish link between Billing document and material document

    Hi All,
    I have billing document for some materials created using the FM BAPI_BILLINGDOC_CREATEMULTIPLE and I have created the material document for the corresponding materials using the FM BAPI_GOODSMVT_CREATE. Both these documents have been created in separate FM calls.
    My requirement now is that I have to establish a link between these documents, so that the material document appears when  the "Document flow" button is clicked in billing screen (VF02). Does have any suggestion for making this happen ? Any help will be highly appreciated .
    Cheers,
    Sandeep

    hi Meenakshi,
    Check with this i hope it will work
    you can have the data from BKPF through fields like AWKEY and AWTYP and VBRK (vbeln).
    in bkpf there is a field called AWTYP  in which you have to specify 'VBRK',and you have split AWKEY depending o upon the vbeln .
    bkpf-awtyp = 'VBRK'
    bkpf-awkey = vbrk-vbeln
    bkpf-bukrs = vbrk-bukrs.

  • Link Between delivery and material document

    Dear All,
    how do we link between delivery document,
    and between delivery document and accounting document,
    with regards
    Mohammed Raees

    Hi there,
    Material doc is the PGI document which is created whenever there is material movement either GR or GI. In VL02N --> document flow, select the GD goods issue & click on display document. It will take you to the material doc. There is a field called material slip in that. The value stored in material display is the delivery num. That is how you link the delivery & material doc.
    From the material doc if you click on accounting docs, it will give you the A/c document num & the costing doc num (if available).
    From the material doc, select the item & click on details from ityem, it will give you the GL account for which the GI is posted.
    Regards,
    Sivanand

  • Link between invoice number and material document number

    I need a way to get the list of material document numbers which correspond to a particular invoice.  Is there a way to find this information?  I am looking [looping] at table EKBE during a user exit in SAPMV60S but I need to restrict the entries by a range of (multiple) material document numbers.
    Regards,
    Davis

    It looks like you're missing a piece of code.
            SELECT SINGLE * FROM BKPF WHERE BUKRS = Z_EKKO-BUKRS AND
    *                                       BELNR = EKBE-BELNR AND
                                            AWKEY LIKE X_KEYFLD AND
            CHECK SY-SUBRC = 0.
    The SELECT just ends at the "AND".
    Should there be another line after the "AND"?
    You said you had an invoice number; why can't you use that in your WHERE clause to limit what is returned from BSEG?
    What field are you using for the invoice?
    I had mentioned BKPF-XBLNR before, which we use to store the vendor invoice on a PO, but what you are doing sounds different.  Are you referring to an invoice that you created?
    I think that this might be in BSEG-REBZG, and you should be able to filter on this field.
    Shouldn't such an additional filter give you what you want?
    e.g.
    if the invoice specification is a single value:
    * Getting the Vendor Invoice header data
      SELECT SINGLE * FROM bseg WHERE bukrs = z_ekko-bukrs AND
                                      belnr = bkpf-belnr AND
                                      hkont = '0000416000' AND
                                      rebzg = invoice
    or, if the invoice specification is a range or list:
    * Getting the Vendor Invoice header data
      SELECT SINGLE * FROM bseg WHERE bukrs = z_ekko-bukrs AND
                                      belnr = bkpf-belnr AND
                                      hkont = '0000416000' AND
                                      rebzg IN s_invoice
    If you are not using rebzg, then do the same against whatever field you are using.
    Good luck
    Brian

Maybe you are looking for