HU and WM managed SLoc with QM

Hello all,
we have problem with a HU managed SLoc and inspection lots. If we post the stock in the usage decision from restricted to unrestricted a delivery is created automaitcally in the same time. We dont know why. How can we prevent this. Please tell me whether you need more infomation.
Thanky in advance best regards
Yavuz

With HUM/WM active, you need to specify the affected HU/SU for every goods movement. When you do transfer post via IM, SAP will create an HU delivery (normally delivery type HTP) which you then have to create a Transfer Order to select the affected SU before you can post goods movement. As you are probably doing a movt 341/342 (?), the same logic applies.
If you want to avoid this behavior, maybe you want to deactivate QM for 341/342 in IMG> Logisticsc-General > Handling Unit Management > Basics > MAterials Management > Inventory Management > Set QM check and Delivery Type for each Movement type.
For other goods movements, it is preferred to post movements by HU via VLMOVE to avoid delivery creation. Unfortunately, there are only limited movement types offered by standard SAP in this transaction.
I have been looking for forum experts on QM with HU/WM environment as I've been encountering some problems in other areas too, but looks like there are not too many.
Anyway, hope my input helped.
Michele

Similar Messages

Training and Event Management Integration with FICO

How Training & Event Management is integrated with FICO?
How it will be integrated and where?
Could you please put it in simple way?

Hi Rajesh,
Cost allocation:
Here it is possible to charge an employeeu2019s cost center with the fee for attending a business event (e.g. training course, workshop). The business event organizeru2019s cost center will be credited and the attendeeu2019s cost center will be debited.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
The costs incurred from actually holding a business event can be transferred from the resources cost center to the business event organizeru2019s cost.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
In SAP Configuration:
Training and Event Management > Integration->Billing and activity Allocation-->Activity Allocation and cost transfer posting.
Please do above configuration and create business events with or without resourses, in that you can maintain cost centre to post the expenditures .
Bhairavareddy

Will MIM (Merchandize and inventory management) work with SAP AFS / SAP POS

We are implementing SAP AFS ERP at the head office and SAP POS at the retail stores.
We want to implement the MIM module for inventory management at retail store level. Does MIM work in conjunction with SAP AFS. A consultant was suggesting that MIM works only with SAP Retail and no other vertical SAP solution.
Can someone please clarify?
Regards
paddy

MIM is linked to IS Retail, not to AFS.
Nevertheless, you can always link and AFS and a Retail system. SAP provides a very convincing ALE scheme for this.
Eric

Reset JSF session and the managed beans with sesison scope

Hi,
this is a very general question and maybe stupid for most of you. I have my jsf/facelets web application and i use inside of this application some managed beans, which are session beans. I want to know how is it possible to reset this beans. I'm asking this question beacuse i have this kind of problem: i built my web application which has a login form and i use the browser to test it. When i browse to the login page and I login with my credentials i get my customized home page. Then i open another istance of the browser and i browse to the login page again but this time i login as a different user. The result home page is the same as i got before with my login credentials, so the session is always the same. Instead i want the session and all its objects to be resetted for the new user! Do youn know which is the solution?

The fact is that i want to have two sessions in parallel, so using the same browser and opening two tabs, i want to browse to the login page and access as two totaly different users and using in parallel the application without the problem of one user's action affecting the other user beacuse of session sharing. So I want to force the application to create two different session for the two users logins, because as i told you before as it is now, they are sharing the same sesison. And i think that if i at the login time I iterate thorugh the session and delete all the objects i will be able to have only one session per time. Isn't it?

Transfer:WM-managed non-HU managed stor location to WM and HU managed sloc

Dear All,
I have one storage location that is Warehouse managed and non-HU managed. I have another sloc that is warehouse managed and also HU managed. I want to move stock from the first to the second. I use HU04 and specify the destination storage type and bin. The movement is executed and I can see the stock in the final storage location and bin. But stock is still visible in the original storage location and bin. Also a negative quant is generated in the final storage type/bin.Moreover, there is no posting chnage notice created.
Is there a way I can get this posting change notice created?

Hi Vijay ,
Facing similar problem , any soln for that ?
regards
Shrey

ZenCast and Sync Manager problem with 16GB

I want to use ZenCast to sync podcasts the new ZEN I got today as a present. However, after installing everything and downloading some podcasts, when I click 'Transfer', an error occurs:
Cannot complete operation: some of the components may not be installed correctly. Please reinstall the application.
After reinstalling, the same error occurs. Furthermore, looking in the settings of the program, it doesn't list my Zen at all in the Players tab, and the whole tab is greyed out for some reason.
Also, attempting to open Sync Manager gives the error that no player is connected.
I am using the latest versions of all of these programs, and my Zen is at firmware .20.02e. I am also running Windows Vista 32-bit.
Any help would be greatly appreciated.

Not sure if this helps, but:-
I just got an IPhone4 - Gave My IPhone3 to husband.
We ended up hsving to set up two login users on the PC (not sure how to do that) and then two seperate ITunes accounts, one for each of us.

What else SCE couldn't do without Collection manager and Subscriber Manager for SCE?

Can we still monitor the traffic and control the subscriber even we do not have any Collection manager and Subscriber Manager? with SCE alone couldn't analysis or control the traffic?

Hi,
Without CM you can not generate reports based on RDR collection process. For example if you dont have Collection Manager you can not generate reports that are predefined on the SCA Reporter or insight. Only you can do is you can poll SNMP counters/values by a s/w and you can graph them, but it is not suitable and not covers the all data that SCE collects and reports. And for the SM side if you want to communicate with a policy/external server you really need an SM, also you can use its internal Quota manager to count quota.

Media and Effects manager and video windows won't show up when STP launches

Today I launched Soundtrack Pro (from FCP Studio 5 Academic) and neither the Media and Effects Manager window (with Browser, Search, Favorites, Bin & Effects tabs) or the Video would show up. All I get is the project window.
When I tried importing an audio file or opening a multi track file, I still don't get these two windows, and under the window menu, all of these options are GREYED OUT.
Is there a certain setting I need to bring up the other two windows this program needs? Shouldn't they just be there when the program launches? HELP!

Update:
So, I just tried re-installing the software and I still only get the multi-track window when the program launches. I can not see any way to get the video viewer or Media and Effects manager windows to show up.
Please, what am I doing wrong?

Block material of sloc with HU management

Hi experts,
How to block material in sloc with HU management. I found I can't use MB1B 344 to do it. I check SAP help and found standard sap provide me tcode VLMOVE to do it, but I see in mateiral process there is no 344 mvt can't find.
Who can explain me detail about block material from unrestricted to block status with HU sloc.
Thanks.

Hi Santosh,
I don't need do GR for special stock, why use 103,105 mvt. Please explain in detail, thanks.
Stock is in shipping sloc for finished goods.
Edited by: wlmworld on Dec 30, 2008 8:24 AM

What is new with MAX 2.0 and is it compatible with Session Manager?

We added non-IVI instrument information in, basically the same structure as for IVI instruments,
into the ivi.ini file to keep all instrument information in the same place. Using MAX Version 1.1 caused no problems whatsoever and the system worked fine. With the advent of MAX 2.0 you seem to use ivi.ini as well as config.mxs to store instrument information. What we have found now is that given a working ivi.ini file from MAX 1.1, we end up with 2 or 3 copies of all the devices in the IVI Instruments->Devices section! When the duplicate entries are deleted and the application exited, the
ivi.ini file is updated minus the [Hardware->] sections which contain the resource descriptors that our appl
ications look for. As an added complication, under MAX 2.1 (From an evaluation of the Switch Executive) It behaves the same, except that it almost always crashes with one of the following errors. 'OLEChannelWnd Fatal Error', or 'Error#26 window.cpp line 10028 Labview Version 6.0.2' Once opened and closed MAX 2.1 will not open again! (Note we do not have LabVIEW on the system.) What is the relationship between the config.mxs and ivi.ini now? Also, your Session Manager application (for use with TestStand) extracts information from ivi.ini and may expect entries to be manually entered into ivi.ini (e.g. NISessionManager_Reset = True) i.e. Is the TestStand Session Manager compatible with MAX 2.0?

Brian,
The primary difference between MAX 1.1 and 2.x is that there is a new internal architecture. MAX 2.x synchronizes data between the config.mxs and the ivi.ini. The reason you're having trouble is that user-editing of the ivi.ini file is not supported with MAX 2.x.
Some better solutions to accomplish what you want:
1. Do as Mark Ireton suggested in his answer
2. Use the IVI Run-Time Configuration functions. They will allow you to dynamically configure your Logical Names, Virtual Instruments, Instrument Drivers, and Devices. You can then use your own format for storing and retrieving that information, and use the relevant pieces for each execution. You can find information on these functions in the IVI CVI Help file located in Start >> National I
nstruments >> IVI Driver Toolset folder. Go to the chapter on Run-time Initialization Configuration.
I strongly suggest #2, because those functions will continue to be supported in the future, while other mechanisms may not be.
--Bankim
Bankim Tejani
National Instruments

PC died and in turn my main iTunes library. iPhone was synced to it. Now when I try to connect to another library it tells me the phone must be wiped clean before I can manage music with new library. Any way around that? Don't want to lose music.

My PC died and in turn so did my main iTunes library. My iPhone was synced to the library that is gone. Now when I try to connect to another library, it tells me the phone must be wiped clean before I can manage music with new library. Any way around that? I don't want to lose the music that is on my phone. I am looking for a way to tell the phone to "forget" the old library and let me start working with a new library.

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup.

Problem with Drag and drop manager

I am noticing that the sample provided at
http://livedocs.adobe.com/flex/3/html/help.html?content=dragdrop_7.html is not working when tried on any version of FireFox browser on a Mac OS version 10.6.3.
So my understanding is that there seems to be some problem with the drag and drop manager in Flex when used on Firefox on a Mac OS version 10.6.3.
It will be very helpful if you can provide any work around for this issue. We want to implement the drag and drop feature in a website that we are building for one of our clients.

You must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
CM.

Account type M and G/L account with open item management not permitted

Hi,
I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted". Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07. Now I am getting this error.
Please provide the solutions to overcome this and I want to execute the full transaction.
Thanks in ADVANCE.
Kishore

Hi Kishore,
Please check these threads
Account type M and G/L account with open item management not permitted
Re: Account type M& GL with open item managment not permitted error
Posting to G/L accounts with open item management are not permitted
Hope this would help you.
Good luck
Narin

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2

Send Email Report with Publisher? and Job Manager...

Hi, i have a great Doubt, i try to send Email with a report, first i try to send with Publisher, this is all configurations.
Delivery Configuration
!http://lh3.ggpht.com/_V2lpPpulbm0/Slwm-4TLiJI/AAAAAAAACag/xZ5w57zkRnM/s800/BI%20Publisher.PNG!
Email Configuration
!http://lh5.ggpht.com/_V2lpPpulbm0/Slwm_PKsjVI/AAAAAAAACak/baCeaA9kV_s/s800/BI%20Publisher2.PNG!
Configuration Send Parameters
!http://lh5.ggpht.com/_V2lpPpulbm0/SlwroVMXh4I/AAAAAAAACao/0-UaglX4N5Y/s512/configuracionparametros.PNG!
But when i submit.. i have an error: "Must issue a STARTTLS comand first",*this error* means that Gmail Server not suporter?
Do you know Some Mail Company to Rrealize some test.
!http://lh3.ggpht.com/_V2lpPpulbm0/Slwm-8g_LJI/AAAAAAAACac/1CeWNWZLL18/s640/errorpublisher.PNG!
But... It is neccesary configurate Job Manager? why is necessary configurate Publisher and Job manager, is the same? or Each one is in use for a different thing, all forms i post my Job Manager configuration too.
!http://lh4.ggpht.com/_V2lpPpulbm0/Slwm-X7idrI/AAAAAAAACaU/eq_N_Rloqjs/s576/SchedulerConfiguration.PNG!
thanks all and sorry for Spam Images(I think You comprehension better me)

. i have an error: "Must issue a STARTTLS command first",this error means that Gmail Server not suporter? yes gmail will not support to send emails from this......because our accounts are free...
Try with your corporate mail ids it will work.
It is neccesary configurate Job Manager? why is necessary configurate Publisher and Job manager, is the same? or Each one is in use for a different thing Bi Publisher will not use Job manager mail settings.....If yes ,why we need to configure the mail settings in BIPublisher itself??
Two things are different......
thanks,
Saichand.V

HU and WM managed SLoc with QM

Similar Messages

Maybe you are looking for