HU creation using HUPP3

I have following doubt on Planned HU creation using HUPP3 (since i am using this transaction for the first time and not sure if the client has done any modifications)
1. Is it standard to pack more than one sales order line items in one HU using HUPP3
I have a scenario in which business is creating one HU for more than one line items of a sales order (shipping point for all the line items is same).
The issue is in HU the VEKP_NTGEW & VEKP_BRGEW fields takes the weight of first line items of the HU only.
Customer modified the program SAP standard program.Here they can select multiple line items in single HU but while displaying HU through HUMO t-code it showing only first line item details like net weight.But client want it should show total weight of HU.
Can anybody tell me how to achieve above requirement.

Hi All,
Thanks for viewing the query. I have found out the issue
The client had made some modifications to the program.
In standard SAP through HUPP3 only one line item of a sales order can be packed into one HU

Similar Messages

Error in : Purchase order Creation using BAPI_PO_CREATE1

Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
* Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
* Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Hi Shareen,
I think in the following parts of the code,
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa.
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi
 poitemx = i_bpoix
 poschedule = i_bpos
 poschedulex = i_bposx.
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Error with quantity field:Datasource Creation Using Function Module method

Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

Hi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet

Custom List Form creation using Powershell - SharePoint 2013

Hi,
I have a custom List called 'IssuesList' with 4 fields - "IssueTitle","IssueID","IssueDesc","Status"
While displaying display form I should show 3 fields expect Issue ID i.e. IssueID should be hidden.
and on edit form only Status field should be editable. So using SharePoint designer I created respective Edit form and display forms and changed XSLT to control the display mode on the fields.
I have everything scripted in powershell till now - creation of custom list, publishing pages, webparts etc. however I am looking for how to provision or associate these 2 list forms with IssuesList after I create the list in new site.
I have restrictions on using wsp and site/list template due to business needs. So I need to know if there is any way I can upload these 2 files after I create custom list in powershell and associate them as defaultdisplay and defauteditforms?
Please advise.

Hi,
Per my understanding, you might need to apply these custom forms to a list after list creation using PowerShell.
With PowerShell with SharePoint Object Model, we can hide fields on list forms.
The similar thread below with code snippet will provide more information about this:
https://social.technet.microsoft.com/Forums/en-US/ee6fc2eb-197f-4144-94fa-8a4e438675d9/hide-a-field-from-edit-form-list?forum=sharepointgeneralprevious
If there may be other requirements except for hiding fields, as you have limitation on using custom solution package(which should be preferable in such scenario),
a workaround I can provide is that, after list creation, you can add Content Editor Web Part contains the CSS style or JavaScript to the form pages of a specific list, it will help you hide/disable the specific elements, this can be achieved programmatically.
The code below can add a Content Editor Web Part to the DisplayForm of a list(though in C#):
public static void AddCEWP()
SPLimitedWebPartManager manager = null;
SPFile file = null;
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
try
web.AllowUnsafeUpdates = true;
file = web.GetFile(web.Url + "/Lists/List018/DispForm.aspx");
manager = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
ContentEditorWebPart webPart = new ContentEditorWebPart();
XmlDocument xmlDoc = new XmlDocument();
XmlElement xmlElement = xmlDoc.CreateElement("HtmlContent");
//xmlElement.InnerText = "Hello World!";
//write the custom CSS style or JavaScript here
string content = "<style>your custom style here...</style>";
xmlElement.InnerText = content;
webPart.Content = xmlElement;
manager.AddWebPart(webPart, "Top", 0);
manager.SaveChanges(webPart);
web.Update();
catch (Exception ex)
//Utility.SPTraceLogError(ex);
finally
if (manager != null)
manager.Dispose();
web.AllowUnsafeUpdates = false;
About how to hide fields on Standard List Forms using jQuery:
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
http://stackoverflow.com/questions/10010405/how-to-hide-a-field-in-sharepoint-display-form-based-on-the-field-name-jquery
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Restrict Item Category Item Creation using Reference Only

Hi All
Here is the scenario, I want "Restrict Item Category Item Creation using Reference Only"
a.Retrieve document number VBELN from sales order header table VBAK for the current order. Check if the sales order is of type ZAB referencing field AUART in table VBAK.
note : Any changes to existing sales order "ZAB" will be performed in thesame sales order type(ZAB) in VA02 transaction.
b.If step a is passed, check internal table structure for sales order item level as XVBAP-PSTYV for possible item category values of 'ZDEF' for the entered line item and document number (XVBAP-VBELN).
c.If the cancel/change item category values are found on the line item, check internal table structure for document flow (XVBFA) if the cancel/change item category was created as reference:
i.Check if entry exists in XVBFA for the preceding document number field VBELV with value equal to value in the subsequent document number field VBELN. This value must equal the current sales document number VBELN in table VBAK.
ii.The above check must be done in conjunction with the following check:
1.Check if entry exists in XVBFA for the preceding document type field VBTYP_V with value C equals subsequent document type field VBTYP_N with value of C.
d.Once the above checks are passed, collect the item number from internal table XVBAP (Field: POSNR) for the change/cancel item category line item added to the sales order.
e.Check if the item number retrieved in the previous step exists in table VBAP (Field: POSNR) with an item category that is not part of the list of cancel/change item category defined in step b.
f. Check if the item number collected in the previous step exists in the subsequent item number (Field : POSNN) in internal table XVBFA for the row that passed checks in steps b and c.
g.If item number exists, check if this subsequent item number field equals the preceding item number field value (Field: POSNV) in table XVBFA.
h.If step g fails, generate an error message stating that the user needs to the create the cancel/change item category line item with reference to the original line item and do not allow the user to proceed with the transaction.
i.If step g succeeds, allow the user to proceed with the transaction.
can any one send me the logic for this scenario.
Rgds
Chinna

Hi Chinna,
Please use BADI "BADI_SD_SALES_ITEM" to achieve your requirement..
Let me know if you have further questions..
BR
Rakesh

Material Creation Using BDCs.

Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problem

hai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal

Auto PO creation using purchase requisition

Hi,
I have tried the following steps for auto PO creation using purchase requisition.
i. Maintain Auto PO in Material master Purchasing view
ii. Select Automatic purchase order in Vendor master- Purchase data
iii. Maintain info-record
iv. Create PR through ME51
v. enable source determination during creation of PR
vi. Execute using ME59N
But Auto PO is creating with the same document type (e.g NB) which is used while creating purchase requisition (e.g NB). Following steps have done in SPRO.
1. SPRO - MM - Purchasing - purchase requisition - define document type
a. NB- PR document type LINK TO DI01- PO document type
2. SPRO - MM - Purchasing - Purchase order - Define document type
a. DI01- PO document type LINK TO NB- PR document type
3. There is no linking from NB - NB & DI01 - DI01 but still it is creating auto PO with document type NB iif requisition has been created with document type NB.
Please suggest on this . waiting for ur quick response.
Thanks...
ARATI.
Thanks!
Arati.
Edited by: Rakesh Gupta on Aug 20, 2009 11:00 AM

Hi
Please check the below thread
PR to PO via ME59 -Doc type issue
Thanks/karthik

Simple WebService Creation using JDeveloper 11.1 Technology Preview 2

Hi,
I like the way JDeveloper simplifies the web service creation using the wizards and allows to test the web services from the IDE itself.
I have the following issues when I tried the step-by-step tutorial (http://www.oracle.com/technology/obe/obe11jdev/11/ws/ws.html) to build a web service. I greatly appreciate if some one can help me with these issues. This tutorial basically provides how to create a simple hello world kind of web service using JDev. Some of the steps are failing in my case.
Failure 1) Unable to find the WSDL document
When I invoke the "Test Web Service" menu item HTTP Analyzer is unable to locate the dynamically generated WSDL. I did try with and with-out proxy settings both the cases it failed. However I can see the WSDL if I go to the given WSDL URL in my web browser. I suspect I am missing some thing in Jdeveloper configuration. So I had to manually save the WSDL from the browser to go to further steps.
Failure 2) Failure in the Response message
When I invoke the request message I am getting the following error in the response:
"The selected message is not a SOAP message". However, if I use the browser to test the web service, it is working fine.
I greatly appreciate if you can provide me some insight into why JDeveloper is failing in these cases.
Thanks
Sunil

It started working after I restarted the JDeveloper with no proxy settings. Seems to be after changing proxy settings JDev need to be restarted to take the preference changes to be effective in this case.
Another interesting aspect that I noticed was, when HTTP analyzer is running it dynamically sets the proxy in the preferences settings as localhost with the HTTP analyzer port.
But anyway now I am able to run and test this webservice within the JDev itself.
Regards
Sunil

WLST Domain Creation using JRF template throws SQLRecoverableException

I am working on domain creation using templates and included the JRF template to use OPSS functionality.
I have run the RCU utility to create the required components that will have necessary tables to host OPSS data and also tested that it works with CC_STB user that i will use to connect from WLS.
I am able to ping the database server having RCU components from the VM where i want to create and configure the domain but when i configure the LocalSvcTblDataSource with the same ip address and try to setup the OPSS datasources, it gives me "Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified Error Code: 17002"
Below is my WLST python script:
#=======================================================================================
# Open a domain template.
#=======================================================================================
readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
#=======================================================================================
# Update the domain to enable the WebLogic Server domain with JRF and EM.
#=======================================================================================
addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
#=======================================================================================
# Configure the Administration Server and SSL port.
# To enable access by both local and remote processes, you should not set the
# listen address for the server instance (that is, it should be left blank or not set).
# In this case, the server instance will determine the address of the machine and
# listen on it.
#=======================================================================================
cd('Servers/AdminServer')
set('ListenAddress','')
set('ListenPort', 7001)
create('AdminServer','SSL')
cd('SSL/AdminServer')
set('Enabled', 'True')
set('ListenPort', 7002)
#=======================================================================================
# Define the user password for weblogic.
#=======================================================================================
cd('/')
cd('Security/base_domain/User/weblogic')
# Please set password here before using this script, e.g. cmo.setPassword('value')
cmo.setPassword('password')
#=======================================================================================
# Create and configure a JDBC Data Source, and sets the JDBC user.
#=======================================================================================
# Get RCU Configuration using RCU service table (STB) schema credentials
cd('/')
cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
cd('JDBCDriverParams/NO_NAME_0')
set('DriverName','oracle.jdbc.OracleDriver')
set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:15210/xe')
set('PasswordEncrypted', 'password')
set('UseXADataSourceInterface', 'false')
cd('Properties/NO_NAME_0')
cd('Property/user')
cmo.setValue('CC_STB')
getDatabaseDefaults()
#=======================================================================================
# Write the domain and close the domain template.
#=======================================================================================
setOption('OverwriteDomain', 'true')
writeDomain('/u01/data/user_projects/domains/cc_domain')
closeTemplate()
#=======================================================================================
# Exit WLST.
#=======================================================================================
exit()
And the complete exception trace.
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/base_domain>dumpStack();
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:55)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1967)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx5.writeDomain$15(/tmp/WLSTOfflineIni4846195865917165143.py:73)
at org.python.pycode._pyx5.call_function(/tmp/WLSTOfflineIni4846195865917165143.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx93.f$0(<console>:1)
at org.python.pycode._pyx93.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:219)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.ScriptExecutor.runGenerator(ScriptExecutor.java:3706)
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:991)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1117)
... 29 more
Caused by: com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:129)
at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:315)
at java.lang.Thread.run(Thread.java:744)
Caused by: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:708)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.configureDBSecurityStore(OpssDomainConfigImpl.java:339)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.initializeSubsystem(OpssDomainConfigImpl.java:166)
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:126)
... 2 more
Caused by: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.processJPAException(JpsDBDataManager.java:2088)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:955)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1459)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1455)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.<init>(JpsDbBootstrapImpl.java:162)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:679)
... 5 more
Caused by: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:614)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:186)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:278)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:304)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:282)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getVersion(JpsDBDataManager.java:1027)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getEMFAndSubject(JpsDBDataManager.java:1124)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:907)
... 9 more
Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:319)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:138)
at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:690)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:215)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:554)
... 16 more
Caused by: java.sql.SQLRecoverableException: IO Error: Unknown host specified
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:465)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:232)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:187)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:98)
... 20 more
Caused by: oracle.net.ns.NetException: Unknown host specified
at oracle.net.resolver.HostnameNamingAdapter.resolve(HostnameNamingAdapter.java:191)
at oracle.net.resolver.NameResolver.resolveName(NameResolver.java:133)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:416)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:687)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:247)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1109)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:316)
... 27 more
Any help/pointers/hints will be helpful
Thanks,
Santosh

Hi Micheal,
Thanks a Lot for your response.
We have checked the OS requirements :
System Itanium 11i (11.31) B.11.31.0803.318a Base Quality Pack Bundle for HP-UX 11i v3, March 2008+
Response:
======
We have the higher version installed for this quality pack.
QPKBASE B.11.31.1109.367a Base Quality Pack Bundle for HP-UX 11i v3, September 2011
2) Required Packages : HPDesktopDev (version B.11.31.01)
Response:
=======
This package is also installed.
X11MotifDevKit B.11.31.01 HP-UX Desktop Developer's Toolkit - X11, Motif, and Imake
3) Required Operating System Patches
PHKL_36248
PHKL_36249
PHSS_37202
PHSS_37501
PHCO_38050
PHSS_38139
Response:
========
We have the supersets for these patches installed. The installation logs also confirm these patches at the OS level.
Check Name:Patches
Check Description:This is a prerequisite condition to test whether the patches recommended for installing the product are available on the system.
Checking for PHKL_36248; found PHKL_36248. Passed
Checking for PHKL_36249; found PHKL_36249. Passed
Checking for PHSS_37202; found PHSS_37202. Passed
Checking for PHSS_37501; found PHSS_37501. Passed
Checking for PHCO_38050; found PHCO_38050. Passed
Checking for PHSS_38139; found PHSS_38139. Passed
Check complete. The overall result of this check is: Passed
Regards
Sumit Kapila

Reena Prabhakar - Sales order creation Using BAPI

Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
Dinesh

Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = l_order_header
    IMPORTING
      salesdocument       = l_salesdocument
    TABLES
      return              = it_return
      order_items_in      = it_order_items
      order_partners      = it_order_partners
      order_schedules_in = it_order_schdl
      order_conditions_in = it_order_conditions
      order_text          = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION.

Need sales order creation using bapi in oops

need code for sales order creation using bapi in oops

hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan

Mass sales order creation using BAPI

Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandra

Hi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K

Upload data for Tcode LT06(Transfer order creation) using BDC -very urgent

hi experts,
I got stucked up in writing a BDC for the Tcode LT06(Transfer order creation using wearhouse number) in MM module,
the problem is like this, when i go to the tcode LT06 , it will ask for material doucument,mat. docu. year and wearhouse number, iam entering the inputs and then press enter, as soon as i press enter it takes me to the second screen where i will be selecting the item and then click on the button called 'Generate TO item'
here the problem arises, as soon as i click the button iam getting a standard SAP error message(No Destination Storage Bin found in storage type 'IMP'). Due to this errror iam not able populate the batch input data on the screen, suggest me a proper solution. rewards will given if solution found useful.
Kishore K

Hi ,
I have done the same in Background with BDC and TR Number for Multiple Materials ,
Can u please explain the scenario, so then I would be able to try for solution ?
Warm Regards.

Need Sample Code for Vendor creation using JAVA API

Hi,
I have a scenario like Vendor creation using Java API.
1.I have Vendors (Main) Table.
2.I have look up tables like Account Group.
3.Also Qualifier table(Phone numbers) too.
Could you please give me the sample code which helps me to create Vendor records using Java API?
I need Code samples which should cover all of the above scenario.
Marks will be given for the relevent answers.
Best Regards
PK Devaraj

Hi Devraj,
I hope the below code might solve all your problem:-
//Adding Qualified field
//Creating empty record in Qualifed table
//Adding No Qualifiers
Record qualified_record = RecordFactory.createEmptyRecord(new TableId(<TableId>));
try {
qualified_record.setFieldValue(new FieldId(<fieldId of NoQualifier), new StringValue(<StringValue>));//Adding No Qualifier
catch (IllegalArgumentException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
catch (MdmValueTypeException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
//Creating Record in Qualified table
CreateRecordCommand create_command = new CreateRecordCommand(connections);
create_command.setSession(sessionId);
create_command.setRecord(qualified_record);
try
create_command.execute();
catch(Exception e)
System.out.println(e.toString());
RecordId record_id = create_command.getRecord().getId();
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue lookup_value = new QualifiedLookupValue();
int link = lookup_value.createQualifiedLink(new QualifiedLinkValue(record_id));
//Adding Yes Qualifiers
lookup_value.setQualifierFieldValue(0 , new FieldId(<FieldID of Yes Qualifier>) , new StringValue(<StringValue>));
//Now adding LookUP values
//Fetch the RecordID of the value selected by user using the following function
public RecordId getRecordID(ConnectionPool connections , String sessionID , String value , String Fieldid , String tableid)
ResultDefinition rsd = new ResultDefinition(new TableId(tableid));
rsd.addSelectField(new FieldId(Fieldid));
StringValue [] val = new StringValue[1];
val[0] = new StringValue(value);
RetrieveRecordsByValueCommand val_command = new RetrieveRecordsByValueCommand(connections);
val_command.setSession(sessionID);
val_command.setResultDefinition(rsd);
val_command.setFieldId(new FieldId(Fieldid));
val_command.setFieldValues(val);
try
 val_command.execute();
catch(Exception e)
RecordResultSet result_set = val_command.getRecords();
RecordId id = null;
if(result_set.getCount()>0)
 for(int i = 0 ; i < result_set.getCount() ; i++)
 id = result_set.getRecord(i).getId();
return id;
//Finally creating the record in Main table
com.sap.mdm.data.Record empty_record = RecordFactory.createEmptyRecord(new TableId("T1"));
try {
 empty_record.setFieldValue(new FieldId(<FieldId of text field in Main table>),new StringValue(<StringValue>));
 empty_record.setFieldValue(new FieldId(<FieldId of lookup field in Main table>), new LookupValue(<RecordID of the value retrieved using the above getRecordID function>));
empty_record.setFieldValue(new FieldId(<FieldId of Qualified field in Main table>), new QualifiedLookupValue(<lookup_value>));//QualifiedLookUp value Retrieved above
} catch (IllegalArgumentException e1) {
// TODO Auto-generated catch block
 e1.printStackTrace();
} catch (MdmValueTypeException e1) {
 // TODO Auto-generated catch block
 e1.printStackTrace();
//Actually creating the record in Main table
CreateRecordCommand create_main_command = new CreateRecordCommand(connections);
create_main_command.setSession(sessionId);
create_main_command.setRecord(empty_record);
try
 create_main_command.execute();
catch(Exception e)
 System.out.println(e.toString());
Thanks
Namrata

Sales order creation using webdynpro in ABAP

Plz give the process how to create sales order creation using webdynpro in ABAP. if not possible plz let me know how to create in JAVA.
It is very urgent. I hope i will get it very soon.
Thanks all
Sai

In your WDA application, all you need to do is call the BAPI BAPI_SALESORDER_CREATEFROMDAT2 when the user clicks some button. Most likely, you can put the code for this BAPI call in the onAction method for your button.
Regards,
Rich Heilman

HU creation using HUPP3

Similar Messages

Maybe you are looking for