HU MTR from ECC to EWM

Hi,
my scenario:
1. Crate PO and inbound Delivery in ECC;
2. Crate Transportation document in ECC and assign Inbound delivery;
3. Pack Inbound delivery in to HU MTR (Mean of transport) in transportation document;
4. Transfer inbound delivery and HU MTR to EWMS system;
5. Putaway using TU (MTR HU)
But, on step 3 i recive error message:
The handling units for the item that is to be packed are maintained in another (decentralized) system. It is not possible to pack in this system.
How to allow packing in ECC?

Hi,
"So in this case the SLOC HUM activation is also not required ?"
it is actually not only not required, but it is also not supported.
"1. Crate PO and inbound Delivery in ECC;
2. Crate Transportation document in ECC and assign Inbound delivery;
3. Pack Inbound delivery in to HU MTR (Mean of transport) in transportation document;
4. Transfer inbound delivery and HU MTR to EWMS system;
5. Putaway using TU (MTR HU)"
What are you really planning to do? Putaway using TU? The TU is only in the yard, it is a truck or some other means of transport - you will not putaway in a bin in it, will you?
In an inbound delivery you can create a HU for the pallet you recieve (only in the outbound delivery in ECC you can not pack in combination with EWM).
When you use the LE-TRA integration by using a transportation document and creating a HU in that document, yes, you actually do not pack into here. You only create the HU, this gets transfered to EWM and a TU is created - but only with the integration available from EWM 7.01.
Brgds
Juergen

Similar Messages

Transport of Global Parameters from ECC to SCM

We have tried to set up RSA1 in our SCM development systems for both F&R and EWM to allow us to transfer calendars, UOMs etc from ECC to these systems but have hit a couple of snags...
We have the following system/client structures for the F&R SCM system:
Development                    Quality Assur.                  Production
DF0 260 (Golden)                 QF0 360                              PF0 960
DF0 261 (Unit Test)
DF0 262 (Perf. Test)
And for BI we have:
DB0 120                                QB0 220                             PB0 920
For the QA and Production instances, we do not have an issue, since the limitation of having only one BI client per system doesn't matter as we only have one client to connect.
But for the Development systems, currently it is the DF0 261 client that is connected to the DB0 120 BI client. We want to be able to pull the data from our ECC golden client (DE2 700) into each of the DF0 clients. But when we try and run RSA1 in any other client than 261, we get an error telling us that only one client can connect to BI and we must work in that client.
I thought we could maybe get around it by simply running report RSIMPCUST in a batch job, but cannot see how to save a variant with the source client name in it since this is always greyed out when you run it online. I guess if I maintain the BI system as the default client for each of these F&R systems in SCC4 it might work, but I don't know what else uses this default client value?
Does anyone know of any workarounds for this? It would be really nice to be able to synchronize all systems (especially as the link is between two non-BI systems, so the BI restriction should not even apply). If we have to go back to the current approach of manually updating the development systems for any changes in ECC then we may as well use that for all clients and just transport the changes. It is not a good solution though...
Thanks,
Luke

there is some explanation to what you have mentioned in Re: Factory Calendar
this talks about calendars and is relevant till SCM 4.x
I would imagine the situation would be the same for UOM
In SCM 5 you have the option to update the tables, Rebuild the tables and also a simulation option

Unable to load Materials from ECC to Cloud due to UoM errors

Dear experts,
We are working to set up the ECC integration with C4C through HCI, we maintained all necessary settings in ECC and HCI.
When we are trying to send Material data from ECC to C4C they are failing in Cloud with error "Solve Configuration Issue in Code List Mapping for field MeasureUnitCode with value PCE", but we maintained all the Material specific UoM in cloud and mapped them with ECC values in Code List mapping.
Can someone give your input in which scenario this error comes and how UoM Conversions gets updated in Cloud, like ECC Material master.
Thanks & Regards
Naren..

Hi Naren,
we have experienced a similar problem when loading materials from ECC to C4C.
What we have seen is that you have to:
- maintain the basic UoM of the material in C4C
- maintain all the UoM mentioned in the conversions for the material
- maintain the Code Mapping for these UoM if the codes are different from ECC and C4C
Nevertheless we had a problem for materials that in ECC in the UoM conversions section of master data have conversions like: 1 MTR = 1000 MMT (1 meter = 1000 millimeter).
In C4C we have activated UoM MTR and MMT, and MMT is defined as 0.001 MTR. So the conversion rate is defined in C4C.
If ECC sends this conversion for the material to C4C we have an error.
We have solved it modifying the mapping in HCI for the iflow *.erp2cod.material.*: in the mapping, the conversion element is not transferred if the basic UoM is MMT and the conversion UoM is MTR.
This is an example and a simple workaround that allows us to load these materials.
Maybe could be useful.
Regards
Piero

Issue in transfer of data from ECC to APO

Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalitha

Hi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks.

Best practice data source from ECC 6.0 for legal consolidation in BPC NW7.5

Hi there,
after scanning every message in this forum for "data source" I wonder if there isn't any standard approach from SAP to extract consolidation data from ECC 6.0. I have to say that my customer is not using New g/l so far and therefore the great guide "how to get balances from ECC 6.0 ..." does not fully work for us.
Coming from the old world of EC-CS there is the first option to go via the GLT3 table. This option requires clever customization and the need to keep both GLT0 and GLT3 in line. Who has experiences regarding maintenance of these tables in a production environment?
We therefore plan to use data source 0FI_GL_4 which contains all line items to the financial documents posted. Does this approach make sense or will it fail because of performance issues?
Any help is appreciated!
Kind regards,
Dierk

Hi Dierk,
Do you have a need for the level of detail provided by the 0FI_GL_4 extractor? Normally I would recommend going for the basic 0FI_GL_6 extractor, which provides a much more manageable data volume since it only gives the periodic activity and balances as well as a much smaller selection of characteristics. Link: [http://help.sap.com/saphelp_nw70/helpdata/en/0a/558cabb2e19a4db3097b81bba4fd0e/frameset.htm]
Despite this initial recommendation, every client I've had has eventually had a need for the level of detail provided by the 0FI_GL_4 extractor (or the New G/L equivalent - 0FI_GL_14). Most BW systems can handle the output of the line-item extractors without much issue, but you should test using production data and make sure your system sizing takes into account the load.
The major problem you can run into with the line-item extractors is that if your delta somehow gets compromised it can take a very long time (days, sometimes weeks) to reinitialize and this can cause a large load in your ECC and BW system. Also, for the first transport to production, it is important to plan time to initialize the delta.
Ethan

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

One Time Flat File load in a Cube that extracts from ECC

Hi,
I have a cube that is already extracting data from ECC on a daily basis. I am asked to load some historical data into the cube from their legacy system. My question is, how do i prepare that file from the legacy system to match the fields in the Cube? What are the technicalities that i need to look at?
For Example:
0MATERIAL in the Cube: Material Number in the Flat File
ZAMOUNT in the Cube: Cost of Product in the Flat File
How do I arrange to match these?
Thanks

Hi
Create DS and enter the required objects
Preview the Data
Create Transformations (Map DS fields to Targets Objects - direct assignemnt)
Create Infopack and extract data upto PSA
Create DTP and run - it will extract data from PSA to Target
No of Heade rows to be ignored : 1
File type : CSV
Data seperator : ;
Escape Sign: "
Thanks,

User status transfer for sales orders from ECC to CRM

Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
Denis

Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Replicate sales orders from ecc to crm

Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
Andy

Hi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.

Debugging RFC function module from ECC to CRM

Hi All,
My requirement is to debug an RFC function module present in CRM(7.0) system from ECC(6.0) system. A report program in ECC will call CRM custom FM. I found many posts in SDN with the same issue and tried to implement suggestions provided there. But I couldn't succeed. The approach I followed is:
I logged in to ECC report program and kept an external breakpoint just before the function module call.
I logged in to CRM system, opened the function module and kept an external breakpoint there.
In both the systems I provided the dialogue userid( id through which I log in to SAPGUI) in the system->settings->debugging option.
In CRM I activated the external break point in transaction SRDEBUG.
Now when I execute the report program in ECC, control stops at the breakpoint. If I press F5 at the function call, control is not going to the external break point set in the CRM FM. I am getting output of FM directly.
I tried with different settings like turning on the check box for IP matching and session breakpoint active immediate, switching to classic debugger etc. I also tried to provide the RFC user id instead of dialogue user but system throws exception saying only dialogue userids are allowed. I found that by inserting an infinite loop statement, control goes inside the RFC CRM FM but I prefer not to change the code.
Please let me know if I missed anything.
Thanks and Regards,
Naren

Hi,
Debug RFC calls
When an RFC function module is called it is usually not possible to debug the call, using the below techniques we can achieve the same. For this example we are calling an RFC enabled FM in ECC system from CRM system.
Scenario 1: Calling a custom RFC FM
STEP 1: Add an infinite loop in the remote custom Function Module (adding a u201CDO. ENDDO.u201D statement at the start of the FM would be enough).
STEP 2: Execute your program in the CRM system. The execution stops at the RFC call, because of the infinite loop.
STEP 3: Now login to the ECC system and go to transaction SM51 select the process which is executing the RFC and navigate to the menu: u201CProgram/Session->Program->Debuggingu201D this triggers the debugger session in a separate window.
Scenario 2: Calling a Standard RFC FM
When we are debugging a standard program we cannot add the infinite loop, hence we cannot go to SM51 and debug the work process. The RFC destination for the ECC system has a User specified, the RFC function module gets executed using this users credentials. Usually the basis team set up the RFC user as non Dialog user, this does not allow debugging. Contact your Basis team and get this changed to a dialog user enabling you to debug RFC function calls via the normal debugger.
Note: User name configured in the RFC destination (transaction SM59)
Note: User type for the RFC User (transaction SU01D)
Hope this will be helpful..

How to access more than one catalog from ECC

We use the catalogs in SRM from ECC, ME21N. But we are only able to access one catalog. Is there any way to access different catalogs for the users. We have set up different catalogs in customizing but are not able to selcet them.
At the moment we have one for each country, and would like to be able to select among theese, not create one big one? I have heard of an ad-on from SAP is this correct? Any advice on further readings or suggestions to solutions on this problem?
Regards
Ivar

Hi Ivar,
We are also having almost same requirement for multiple catalogs.Can you please let me know how to proceed further on this.
Right now we are able to config only 1 catalog and its working but we need two more to be added.
Regards,
Pavan.

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Service desk message view from ECC

Hi
I have following queries regarding service desk in solution manager.
1. Do user need to login into solution manager to see his message status or can he directly see it from ECC.
2. When a message is created through satellite system support message should display TCode in support message.
3. In service desk mail (New message/ )attachment of message is not appearing. Currently it visible in solman ticket, As per requirement attachment of message should also be mailed.
4. while creating message end user should not login to solution manager. Communication between ECC and Solman has to automatic
5. Users should have reference to earlier messages through ecc.
Thanks
Regards
Mahesh Kumar

You don't need to login to SOLMAN, he can use Workcenter for this to see messages. Please check this below link to know more about Workcenter:
http://help.sap.com/saphelp_smehp1/helpdata/en/6a/4b4713fc2e45ad921a20b0831d07a5/content.htm
You can use Authorization object: CRM_TXT_ID to restrict views for the users.
Also, make sure the user has the following roles:
SAP_SUPPDESK_CREATE
SAP_SUPPCF_CREATE
SAP_SMWORK_BASIC
SAP_SMWORK_INCIDENT_MAN
you can also find security guide from below link:
http://service.sap.com/instguides -> SAP Components -> SAP Solution
Manager
In service desk mail (New message/ )attachment of message is not appearing. Currently it visible in solman ticket, As per requirement attachment of message should also be mailed.
In standard system this is not available. You can create development rrequest for this as per Note 11.
4. while creating message end user should not login to solution manager. Communication between ECC and Solman has to automatic
Check Workcenter as i already explained before.
Also check:
http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e
10000000a114084/frameset.htm

HU MTR from ECC to EWM

Similar Messages

Maybe you are looking for