HU status not changing after GR

Hi All,
For a stock transfer order we create outbound delivery and create HU and then do PGI and at the receiving site we do GR via HU in MIGO transaction.
however the status of the HU changes after it is created and after it is PGI ,,, but after doin GR the status does not change.
Please help me with this ,,,
Regards,
Samuel

hi,
I am doing GR in MIGO transaction with respect to outbound delivery via HU, I am not creating inbound delivery.
Regards,
Samuel

Similar Messages

Partititon1,2,3 in group ODS,FAC status not change after data redistribute

Hello,
first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
i have made a redistribute action like this
1. double click what i want to distribute
2. select the relevant partition , for example partition 0001
3 click the execute immediatelly button .
when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
the log message is
Data Redistribution cannot be continued.
Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
the SQL 6047 detail information is like the following. I don't know what happens.
it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
db2 => ? sql6047
SQL6047N Database partition group cannot be redistributed
because table "<name>" does not have a partitioning
key.
Explanation:
At least one table in the single-node database partition does not
have a partitioning key. All tables in the single-node database
must have a partitioning key before the database partition group
can be redistributed to a multiple-node database partition
group.
The operation was not performed.
User Response:
Use the ALTER TABLE command to specify partitioning keys for
tables that do not have one. Then try the request again

Before redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
select varchar(tabname,30)
from syscat.tables a
where tbspace='<your_tablespace>'
and not exists (select partkeyseq from syscat.columns b
where a.tabschema=b.tabschema and a.tabname=b.tabname
and b.partkeyseq > 0)
Brigitte

The total goods movement status not changed after goods receipt using MIGO

Dear gurus:
when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
how can i do to make the status change when i receive goods in MIGO against inbound delivery?
best wishes,
David

Hi,
If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
Amit

Status Profile : Status not changing in CRM

Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open :   following transactional contorl selected
To be distributed   : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Is any thing i am selecting wrong options in status profile at header level & item level? Much appricieated for solution.
Thanks
shash

Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open :   following transactional contorl selected
To be distributed   : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Not sure whether i am selecting wrong options in status profile at header level & item level?
Plz help me on this.
Thanks
shash

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

Preference status not changed for the processed products

Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
Rahul

Hello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel.

Status not changing to Available after sleep?

Just recently got my wife a MacBook (white). I got her setup with iChat and it's working well except for the status. When she wakes it from sleep, it logs her back into iChat, but keeps a status of "Away". I did change the option in Prefs to "Set me as Available" when coming back or something like that.
What am I doing wrong? Anyone?

Hi,
In the General Section of the iChat Preferences you can set one of three option on "Returning to my Computer" which normally refers to Waking from Sleep or coming back from the Screen saver.
One of the options as you say, is to set the Status to Available (If it was set to Away before).
Like you I find it does not work.
I have also tried the sub-options in the Menu Bar Icon bit about Logging out of AIM if I quit (Which Sleep will be considered as the same thing).
Basically I was trying to find if this setting over-rides the lower one.
I Set it to At User Login set my Status to Available which I know works on Start up. But from Sleep this does not over-ride the Status Message when it is set to Away.
If the above setting is not set the same thing happens (it stays as Away when I wake the computer.
Whether I have it set to Set Me as Off Line when I Quit (paraphrased) or not also does not change the Status Message on waking the computer.
Not even turning Off Auto-Reply with Away message made any difference.
That leaves two things.
Does this setting have anything to do with Sleep of Screen Saver ? (is it something else ?)
Is it a bug ?
iChat help has this on Setting the Status.
If you are away from your computer for a time, your status is displayed as “Idle.” Messages that arrive while you’re away wait on your screen
This implies the former. i.e. if you have set the Status as Away and physically leave the computer and the Idle time kicks in before Sleep or Screen Saver then iChat will change you Status to Idle (Although it can not actually display this varient of Idle).
Also there is not setting if I am Idle change my status to Away either.
The Idle time is preset at 600 seconds (10 mins)
My Screen Saver kicks in earlier than this and may over-ride this.
Right this minute I do not have 10 ins to do something else or wait until the Idle time kicks in.
Summary.
This issue seems to be something based on what Away means in this context.
I suggest it refers to the Idle time (which is hidden from your Buddies if you have set Away as the Status).
Hope this helps.
9:56 PM Wednesday; February 18, 2009

Service Order status Not Changing From Resloved to Closed status

The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........

Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ...

URL is not change after successful authenticate with ISE 1.1.1

Hi,
I have setup Cisco Identity Service Engine (1.1.1) with Wireless LAN Controller (7.2.110)
Everything is complete unless the URL redirect. My guest client can join the Guest SSID and also can authenticate to ISE.
But after they success to authenticate with ISE, the URL in the browser doesn't change to the pre-configure. It still be something like https://ise-ip:8443/guestportal/redir.html . Anyway the content in the browser is changed to the URL that being configured such as http://www.google.com/
How can I do with this situation cause everything is working fine but only the browser URL that is not change to the preconfigure one.
Thanks,
Pongsatorn

Hi,
This is the user experience when using central web authentication:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final
Here is the process when you use local web authentication:
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_guest_pol.html#wp1295223
Hope this helps,
Tarik Admani
*Please rate helpful posts*

Height of a Tile (or orther container) not changed after inserting nodes

Hi,
I am a javafx beginner and I'm struggeling with the size of the containers. Here is what I try to do:
I am making a photo gallery in which an Album can contain subalbums and photos through which a user can scroll. The Album objects are stored in a Tile, the Photo objects in another Tile. These Tiles I want to display vertically in a VBox, which is in turn placed on a Clipview. Now my problem is: the height of the Tile is not changing when I insert Photos or Albums in the Tiles. And I need these heights (or that of the VBox) to do calculations for my scrollbar. When I print the bounds for the album Tile before inserting Album objects everything is 0, which is correct. But when I print the bounds after insertion of 10 Albums the height is given as the height of only 1 Album, even without hgap and vgap. The height of the VBox is also equal to this height of 1 node.
What am I missing here? How can I get the correct height to use for my scrollbar calculations?
I hope you can help me out, because it's hunting me for days now :-)
Thanx,
RedMary

Well, that's one of the mysteries of JavaFX: the initialization order... :-)
When you create the custom node, it is not yet in layout, so the tile isn't laid out either, and its dimensions aren't final.
If I add a button to the scene to dump the data, you can see the final dimensions.
I also tried a trick this week-end, to override doLayout to know when a node have been laid out. A quick test shown mixed results, but perhaps it can be a starting point.
class Gallery extends CustomNode {
    var albumList = Tile {
        width: 1000
        vgap: 25
        hgap:25
        content: []
    var photoList = Tile {
        width: 1000
        vgap: 25
        hgap:25
        content: []
    var box = VBox {
        spacing: 50
        content: [albumList,photoList]
        override function doLayout(): Void
            super.doLayout();
            ShowData("After B layout");
    public override function create(): Node {
        ShowData("Before insertion:");
        for (i in [1..10]) {
             var rect = Rectangle {
                 width: 100;
                 height: 100;
                 fill: Color.RED;
             insert rect into albumList.content;
         for (i in [1..15]) {
             var rect = Rectangle {
                 width: 100;
                 height: 100;
                 fill: Color.WHITE;
             insert rect into photoList.content;
        ShowData("After insertion:");
        var group = Group {
            content:[box]
            override function doLayout(): Void
                super.doLayout();
                ShowData("After G layout");
        return(group)
    function ShowData(msg: String): Void {
        println("==> {msg}");
        println("albumList LayoutBounds:{albumList.layoutBounds}");
        println("albumList BoundsInLocal:{albumList.boundsInLocal}");
        println("albumList BoundsInParent:{albumList.boundsInParent}");
        println("box LayoutBounds:{box.layoutBounds}");
        println("box BoundsInLocal:{box.boundsInLocal}");
        println("box BoundsInParent:{box.boundsInParent}");
Stage {
    title: "Application title"
    width: 1000
    height: 800
    var gallery = Gallery {}
    scene: Scene {
        width: 1000
        height: 800
        fill: Color.BLACK;
        content: [
            gallery,
            Button {
                text: "D"
                action: function (): Void {
                    gallery.ShowData("On button click");
}

Presence status not changed when using Lync 2010 Remote Call Control

Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
Martin

I think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Task status not changing in UWL

Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Sarath

thats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna

Project Definition should not change after releasing

Hi SAP Gurus,
Could anyone please throw some light on the method to disable project definiton field from changing after it has been released..

Hi,
Master data lock can be used with reference to the object selected, by going to editstatus-Lock----- master data, by selecting this, all the data (like fields present with respect that object, excluding cost planning, budgeting, account assignment) pertaining to the object will be locked and you wouldn't be able to make changes to those fields.
Now, coming to automating of this lock can be done through using user status, when you set that user status, all the master data will locked.
Regards
Avisek Bhardwaj

Images not changing after upload ?

Has anyone ever had this happen ? I have a site like a
myspace type social community site and well some people have been
having a problem where they upload the picture and it does not
change for them ? When I refresh on my end it shows up just fine
but on there end its showing up as the old picture, this is of
cource after they have hit reload, cleared out the chache etc .. I
am not sure what could be causeing it, could there be some odd
server cacheing going on ?
Anyhow any help would be awsome thanks !
Mike.

Try reloading the page once with code like this:
<head>
<script>
function reloadItOnce(){
if (self.name != 'xrefreshedx')
self.name = 'xrefreshedx';
self.location.reload(true);
else self.name = '';
</script>
</head>
<body onLoad="reloadItOnce()".........

External Hyperlinks Will Not Change after Publishing

Hi - I'm running the most up to date iWeb and trying to publish external hyperlinks that will not change no matter what I do. They do not overlap, there is no image blocking them, and I have checked and rechecked that they work on iWeb perfectly. I have tried saving each update individually with the inspector, publishing each update individually, re-entering each url then tab or enter - basically everthing suggested on these forums. The site is scullyfilm.com and the external links are to my pages on my squarespace site.
Any ideas?

It's very simple to do and it's virtually impossible to do it wrong.
Here's how I did it.
Went to Squarespace :
http://scullyfilm.squarespace.com/
Right-clicked a link and copied it :
In iWeb, selected a button and made it a hyperlink. iWeb automagically places the copied link in the URL field :
Repeated for other 3 links.
There's currently ONE hyperlink on your page (last updated 20140113) :
http://scullyfilm.com/scullyfilm/HOME.html
and it links to :
http://scullyfilm.com/casting/
which does not exist.

HU status not changing after GR

Similar Messages

Maybe you are looking for