Huawei E161 Stick from o2 Germany not working on OSX 10.5.8

Hello all,
a few weeks ago i purchased the "Surfstick 3" from o2 Germany, which is a Mobile Broadband Device by Huawei (Model Name E161). I plugged the stick into my MacBook and installed the software. It seems OSX is recognizing the device since it is listed in the network preferences. When i try to hit connect in the Huawei software a window pops up saying "No carrier detected. Please check phone line connection and try again". I tried to install the Stick via BootCamp on Windows XP and tested it on a Windows Vista machine, without success.
Any ideas?
Greetings and thanks in advance!

Ok i just solved it. Apparently o2 forgot to activate my sim card. :-/
Bye Bye

Similar Messages

  • Old videos from Power PC not working in OSX

    I have old videos (converted from a camcorder to digital) that worked on a Power PC but no longer work in OSX.
    The files are still intact, or at least are as large as they were, but do not seem to contain a file format. "Get Info" says they are a document (many GBs in size).
    These were originally videos that I took on a camcorder and had then streamed onto an old Power Mac G5 to get them off of tape and onto a hard drive. They worked just fine on the old G5 and I could watch them with no problem. Fast forward through a move and I had backed that old G5 on to first a 500gb brick then on to a drobo and everything seemed just fine.
    I moved and got rid of the old G5 after making sure I had all the old files. I went to play them recently on a new Mac Mini and they simply do not work. As I note above, they seem to have had their format removed.
    Any help GREATLY appreciated.

    I have solved the problem! I used Mediainfo and determined they were .dv files (not a format I was ever familiar with!) which of course just stands for digital video.
    I renamed them with .dv and quicktime recognized them.
    Thanks for offering help and hopefully this helps someone else.

  • Consuming PI Webservice from Webdynpro Java Not working

    Hello SAP,
    Environment: CE 7.2.
    Resolution expected immediately, Helpful answer is highly appreciated.
    Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
    I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
    I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
    Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
    Options tried so far:
    1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
    2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
    3) Changing the Business Systems in PI and there after calling the service - Not worked
    4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
    5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
    For all the Options, I am facing the same error which is provided in the screenshot.
    Below procedure which I have followed for calling the PI Webservice:
    1) Created Adaptive Webservice Model
    2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
    3) Selected Option - No Service Group Configuration
    4) Provided Logical Destination
    6) Completed creation of Model
    7) Added the model as a UsedModel
    8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
    9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
    10) Build the project.
    11) Activated the code and Run the Application.
    12) Getting the below error which is showed in the message.
    ERROR MESSAGE:
    Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

    Hi Sankar,
    If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
    Please check the code for initialization and execution for the webservice and then test it.
    Best Regards,
    Arun Jaiswal

  • Select * from tab is not working in oracle 10g

    select * from tab is not working in oracle 10g. But at the same time,
    select * from <<table>> is working.
    Please advise me.

    This works for me in 10.2.0.2
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select * from tab;
    TNAME                          TABTYPE            CLUSTERID
    LOAN_DETAIL                    TABLE
    PLAN_TABLE                     TABLE
    ...

  • When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    If you see a red light in the audio output port, then the internal switch is stuck.  Insert the earphone plug a few times and see if you can trip the switch.  If that fails, insert a cocktail stirrer and the like and jiggle it around inside.  If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
    Ciao.

  • Huawei e3276 does not work on OSX 10.10 please help

    After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

    Found a very easy solution online.  Just download the software here and install. works immediately.
    http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

  • Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    if there's a problem with the number of installations, you'll see a message about an excess activation problem.
    if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
    otherwise, attach a screenshot of the error message or quote it.

  • Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

    Hello,
    I would like to ask a question, hopeing it is resolved in some way and i missed it.
    I have installed SP3 Rollup 4 on our Exchange 2010 server.
    This added 2 new Powershell commands
    Get-MailboxSentItemsConfiguration
    Set-MailboxSentItemsConfiguration
    This can be used to manipulate where mail is stored in the send items.
    Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
    SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
    From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
    What we really want it to use the From only way.
    We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
    2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
    Here is is stated on 1 July 2013
    http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
    From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
    That was on 26 March 2013
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
    NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
    We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
    Looking foward to any replies.
    Kind regards,
    Jeroen van Velzen

    I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
    I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
    but the other does.
    If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
    configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
    If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
    the shared mailbox you will see it in Deleted items folder of the shared mailbox.
    The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
    This was accomplished without using the Set-MailboxSentItemsConfiguration command.
    We are running Exchange 2010 SP3 RU4.

  • Hp scanner software Scan 3 does not work with osx yosemite

    The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software? 

    Hello @ringie,
    Welcome to the HP forums.
    I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
    I would like to help.
    There is currently no updated software.
    Try the following work around.
    Scanning in OS X v10.10 Yosemite without HP Software
    Hope this helps get you scanning.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Screensaver is not working in OSX Yosemite

    Hi,
    My screensaver is not working in OSX Yosemite on my macbook pro late 2008
    Can't solve it by my self..

    I had noticed I was having this issue too, and my screensaver never kicking in, and just going to sleep with it never kicking in.
    I had gone in and checked to see if any of the settings had got changed or deleted in the system upgrade, but they were all still set at what I had them at prior... so, did as some attempted above also, and adjusted the times for it to kick in, and still nothing.  Worked when I would hit 'Preview', but still not kick in at the interval time.
    What I just did to get it to work, was just to simply go into System Preferences>Desktop & Screensaver, and just reselected the folder of images that I want to be used, in my case, a folder of images in my iPhoto.  And it now works.
    Apparently, it wasn't working, because, even though it was still selected to use that folder in iPhoto, something must have changed in the upgrades, which might of had something to to with the iPhoto update too, where it had to update my iPhoto library upon relaunch... and my screensaver settings were set to access that older directed to folder within Library, that was updated in the new release... and so, just repointing it to that folder now in iPhoto, got it to work.
    At least, that is my figurin', and I'm stickin' to it! 

  • Systran widget not working in OSX 10.9.5

    Systran widget not working in OSX 10.9.5.

    I've branched this to it's own thread, since the issue you're experiencing is unrelated to the one you replied to, and it would be confusing to try and handle them in the same thread.
    Please provide as many of the follow details as possible, so I can attempt to reproduce the issue you're describing (I realize you've provided some of it):
    Read Before Posting: How To Get A Useful Answer To Your Question

  • Safari scrolling does not work in osx mavericks please solve this issue

    safari scrolling does not work in osx mavericks please solve this issue

    I know it is a limited topic, but could you provide a little more detail?

  • Setting of "opening web pages from last session"not works when open next time

    In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

    ''setting to "open windows & tab pages from last time" does not work.''
    That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
    With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

  • RRI jump to BEx from EP is not working

    Friends,
    We have configured BI admin cockpit. When I click on any iView and then Go To->,
    all the jumps to Web GUI (tcodes) are wroking fine. But jump to BEx web application is not working.
    Go To-> Infocube Status : Analysis, * Analysis.. are not working. It shows "This page can not be displayed".
    But those templates are available in the system.
    If I try the same web applications from RSRT tcode, the RRI is working fine.
    Please help..
    Joe

    Hi Joe,
    Below link will helps you to solve the issue...
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
    If not please take help from your admin guys(Basis people)
    Regards
    Sudheer

  • Archive folder missing from Mail & search not working

    I've been having trouble getting the Archive mailbox to appear in Mail. What's worse, often the search function is broken, and Mail doesn't turn up any search results. I've found some ways to get the Archive folder to reappear, but these only seem to help temporarily. For instance, clicking on the gear at the bottom left and selecting "Get Account Info" then selecting the Archive folder causes it to reappear, but this is only temporary and it disappears after another restart or sometimes after an hour or two. The search not working is the worst, as it sometimes is working and sometimes isn't. I don't have any idea what's causing this, but I am at my wit's end because I NEED Mail to be firing on all cylinders.

    Hello, and welcome to the Discussions.
    What are your selections in Mail Preferences/Accounts/Advanced for this Gmail account, if using IMAP, regarding keeping message for Offline use? The Mail search can only access the list of messages to search Subject, From, etc, but not the entire message unless copies of all messages are being kept on the computer. This would be true for any IMAP account, btw.
    More info, please.
    Ernie

Maybe you are looking for