Huawei E220 strange issue running 10.6.2

Hi, I'm testing the Huawei E220 with a brand new Macbook Air running 10.6.2.
My provider is Vodafone IT.
I have a very strange Issue:
If I start the connection the Macbook Air suddenly shuts down a few seconds after the connection has been established. If I leave the modem connected to the usb port without activating a connection nothing happens.
Has anyone had this same problem??
This mac works perfectly with any other HSPDA usb modem.
Vodafone posted a new software for mac (Vodafone Mobile Broadband 3.04.10.00). This link can be useful (not only for Italy) because it is constantly updated:
http://www.business.vodafone.com/site/bus/public/enuk/support/10productsupport/laptop_connectivity/40_software/software/10_latest/pmac.jsp

my friends 13" mbp is also having trackpad problems. I plugged in an old usb trackball and that seems to to at least get me so I can run a hardware test off the applications dvd.

Similar Messages

Cannot connect to internet with huawei e220 after plugged in Ipod touch

Guys, I have serious problem. I have a vodafone (spain) branded huawei E220 usb 3G modem. It used to work fine until i plugged in my Ipod touch. From then on the connecting app (Vodafone Mobile Connect) will hung up using 55% of CPU capacity.
This is the second time i have this problem. the first time i took the opportunity to uninstall mac osx completely. It worked fine until i plugged in the Ipod touch???? I cannot get this thing running anymore...The problem lies not within the modem as it works under XP on same machine (bootcamp)
Any help would much appreciated!

I had the same issue with vodafone sofware.Just delete it and download the huawei app from this link.
It will work great.
http://www.huawei.com/mobileweb/en/doc/list.do?type=-1&id=736

Problems with Vodafone/Huawei E220 wireless usb Modem

Hi there,
My faithful Powerbook is having issues with a company issued Vodafone Vodem (Huawei E220 wireless HSDPA 3G USB modem).
It worked well at first, but then after restarting, waking from sleep or rebooting from off, the Vodem would cease to connect to Vodafone, with the Vodafone Modem Software giving me a cryptic message "No modem or data card attached".
Yesterday, I tried reinstalling and uninstalling the software, and after several installation/uninstallations, it finally reconnected. It has since stopped working again since shutting down the Powerbook overnight. Reinstalling has not yet worked.
I read somewhere on the net that leaving the modem plugged in for a minute before attempting to connect might work - alas no such luck.
Has anyone else out there had problems with their Vodafone/Huawei E220 USB wireless modem, and how did you resolve the problem?
I have tried both the New Zealand 2.07 version, plus the European 2.08 version of the Vodafone connectivity software.
I am running a Powerbook 15", 1.67ghz, MacOS 10.4.11, 512MB, no other peripherals connected.

No experience, but what happens if you log out then back in?
Does a New User have that problem?

Huawei E220 HSDPA modem (Vodafone Vodem) stopped working

Hi there,
My faithful Powerbook is having issues with a company issued Vodafone Vodem (Huawei E220 wireless HSDPA 3G USB modem).
It worked well at first, but then after restarting, waking from sleep or rebooting from off, the Vodem would cease to connect to Vodafone, with the Vodafone Modem Software giving me a cryptic message "No modem or data card attached".
Yesterday, I tried reinstalling and uninstalling the software, and after several installation/uninstallations, it finally reconnected. It has since stopped working again since shutting down the Powerbook overnight. Reinstalling has not yet worked.
I read somewhere on the net that leaving the modem plugged in for a minute before attempting to connect might work - alas no such luck.
Has anyone else out there had problems with their Vodafone/Huawei E220 USB wireless modem, and how did you resolve the problem?
I have tried both the New Zealand 2.07 version, plus the European 2.08 version of the Vodafone connectivity software.
I am running a Powerbook 15", 1.67ghz, MacOS 10.4.11, 512MB, no other peripherals connected.

hi
I'm using a vodem on my Intel mac book and never even use the software vodafone provide as it is clunky, slow and unreliable.
i used it once to set up the connection and from then on have simply connected through system preferences:network: and connect the huawei modem from there. it even gives you the option of having an icon in your top tool bar.
hope this helps
cheers

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Oracle Identity Manager 9.1.0.2 & WebLogic Strange Issue

Hello,
I am running OIM 9.1.0.2 (new installation) and WebLogic 10.3.3 in a clustered environment. I am having a strange issue where the resolution is eluding me.
This install is running on Windows 2008 x64 Standard and using the x64 JRockit Java.
What's happening is when I configure the managed server to run as a windows service, OIM isn't detected on the server. I can bring up xlWebApp but an unable to log into that or the Design Console. When launching the Diagnostic Dashboard it statest that OIM isn't installed.
If I stop the service and log into WebLogic and start the managed server from within the Admin Console in WebLogic, everything works just fine.
Any thoughts on how to troubleshoot this and ultimately resolve this? The service correct startes the managed server as I can watch it start up in the admin console but when it starts that way, OIM isn't detected. Very odd.
Thanks,
Andrew

Oracle confirmed with us that it is certified for 10.3.3 though it may not be published yet.
At any rate I figured out the problem today. The script I used to create the service was missing the JAVA_OPTIONS section from the xlStartManagedServer.cmd file. Once I added that and re-created the service, all is well.
Thanks

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue in Report Builder

Hi All,
I am facing a strange issue in Report Builder.
I am having a report which is currently in production. when i am opening that report and just saving it without making any changes, then also the size of the report is reducing from 238 to 204 kb.
When i am executing this report in production then it is giving me the error "Invalid Body size"
Please hlep me or else have to ask God to save me.
Thanks
Aryan

Hi Hussien,
I tried thart solution but it not worked. i put some debug statement in Before Parameter form, after Parameter form, before report triggers. When i am running that report i am getting the debug statement of Before and After Parameter triggers but it is failing somewhere in Before Report Trigger.
I removed everything from Before Report Trigger and still the result is same "Invalid Body Size".
Please Hussien give me a some pointer which stage is processed between After Parameter Form trigger and Before Report Trigger.
Thanks
Aryan

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

Firmware updated, now I can´t use Huawei E220 modem

I´m at the end of my tether.
I have an i-mac running OSX 10.4.8 if I remember correctly.
Yesterday (2nd October 2007) my mac downloaded a firmware update.
I let it install the firmware update and then when I tried to get on the net with my Huawei E220 modem it no longer worked.
I deleted the vodafone mobile connect program, used my windows xp laptop (with my Huawei E220 modem) to download the mac installation software for the modem, and re-installed the modem on my mac, but I still have the same problem:
I click on the vodafone mobile connect icon and the icon starts bouncing up and down... but it doesn´t open the programme window, and doesn´t respond - it´s the first crash I´ve ever seen on the Mac. I don´t know a lot about macs and need help with this problem - I even shut the mac down, and turned it on again holding the "on" button in, incase there had been a problem with the firmware. Can anyone tell me how to fix this? please?
MacIgnoramos.

doh! even a pc user probably could have told me how to do this:
1) uninstall vodafone modem program "using the proper uninstall option of the program" - i.e. not simply dragging the icon to the trash can.
2) re-install.
3) sit back, and enjoy the mac again.

A very very strange issue on BlazeDS Deserializing

Hi all,
I run into a very very strange issue on BlazeDS Deserializing. Is there any hint or idea? Thanks a lot!
Scenario 1:
Both the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine.
Actual result:
Everything works fine. All the properties in the Flex Object could be mapped to the Java Class
Scenario 2:
The browser(firefox or IE) and the midtier (BlazeDS ,java) are on the different machine.
Actual result:
Sometimes it works fine.
And most of the time it does not work fine. Only the data in List is mapped correctly. All the values of simple data type such as int are mapped to 0 .
Let me simplify the problem.
The objects of Class B is always stored in the ArrayCollection assocItems of Class A
Flex side:
public class A {
public var id: int;
public var name: String;
public var assocItems: ArrayCollection=new ArrayCollection();
public class B {
public var id: int;
public var assocItems : ArrayCollection=new ArrayCollection();
The id , name in Flex Class A and assocItems in Class B could be deserialize to correct value . But the id of Class B is always mapped to 0. This is not correct.
The log level of BlazeDS is configured to Debug. From the log I can see that each value is passed from Flex side to Java server side correctly.
[BlazeDS][INFO] Channel endpoint my-amf received request.
[BlazeDS][DEBUG] Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/18)
(Array #0)
[0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
However, the Java object does not get the correct value of B.id.
In conclusion,
1. It’s an issue with only default types
2. It does not occur every time
3. It does not occur when the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine
Have you ever run into the similar problems? And what’s your solution?

I checked, when I hard-code the constant in linq, the generated sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ('1062303212007000121' = "Extent1"."AA")
if I pass a variable to the query with same value, the sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ("Extent1"."AA" = '1062303212007000121' /* @p__linq__0 */) (@p__linq__0 is passed as parameter)
The only difference is a paramter. I can't figure out why there is such a impact on performance.

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

AFP Strange Issue

I'm running afp on a 10.4.9 server and I'm having some strange issues. I'm wondering if someone can help me troubleshoot this issue.
Due to some machine room issues, we had to shutdown and reboot the machine last weekend. After that, we've had issues with users saving to the afp server. For example we've had issues with users opening excel files and not being able to click "save" to save them. They must do a "save as". Also a host of temp files are saved within the directory as well... Also big files, often times users will have to download them locally, then make modifications then save to the server. We had no troubles previous to the restart.
Any suggestions?
Mac OS X (10.4.9)

http://www.macintouch.com/readerreports/office2004/topic2741.html
"Dave Provine
I'm not that folks quite understand. The fix is to be sure that the UIDs are unique on the workstations. Of course they have to be unique on the server.
Every time you setup a new OS X workstation, the first user is UID 501, so if you happen to setup a bunch of workstations with just one user each, all of them will have the same UID. THAT is the cause of the save bug. You must change the UIDs on each user's computer."
"Dave Provine
This should work to change UID and permissions. From http://forums.macosxhints.com/archive/index.php/t-12077.html
Changing UIDs in the terminal is a simple NetInfo property overwrite:
sudo niutil -createprop . /users/userName uid XXX
(replace userName as appropriate and XXX with the new UID number)
Finding and changing UIDs across the filesystem is a one-liner command:
sudo find / -user UID -exec chown userName {} \;
(replace UID with the old UID number and userName with the new user name to associate file ownership.)"

Strange issue in SharePoint Search

I just took over SharePoint farm from other admin who left. After that SharePoint search crawl broke. I recreated the SharePoint search with all the settings. But there is really strange issue happening now.
If domain A user log in to SharePoint and search, they see all the results, while users from domain B donot see any result. Why is this happening? Has anyone experienced this before?
Any help will be hugly appreciated.
Adit

Hi Adit,
Is SharePoint installed in domain A and domain B is a one-way trusted domain?
If yes, then the issue should occur because search results gets security trimmed while returning the results back to the domain B users.
I recommend to run the following Windows PowerShell command:
$searchapp = Get-SPEnterpriseSearchServiceApplication
$searchapp.SetProperty("ForceClaimACLs",1)
A full crawl is required to enable the new ACL format across the content.
More information is provided in the link below:
https://support.microsoft.com/kb/2344518?wa=wsignin1.0
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Huawei E220 strange issue running 10.6.2

Similar Messages

Maybe you are looking for