Hub keeps resetting/connection drops

It's happening 2-3 times a day now. Connection quality deteriorates rapidly just before it happens.
This is not acceptable. Somebody from BT please help fix it.
And don't anybody dare tell me "just reboot it", that is not a fix, that does literally nothing to solve the actual problem, just relieves a symptom temporarily. There is an issue that needs to be resolved on a permanent basis that needs to be investigated fully.
If it's a problem with my hub, then I need a new hub that does its job. If it's a problem with my line, then an engineer needs to come and investigate & fix it. I'm connected via ethernet via Cat6 cabling, not wireless, and the disconnect definitely happens, as it says "Disconnected" when I visit my home hub (if it loads): http://192.168.1.254/

I believe this is a consumer forum, so BT will not necessarily take action unless the forum moderators get involved.
Have you been in touch with BT and complained to them?

Similar Messages

  • Home hub 3, broadband connection dropping

    Hi, just a few days ago I recived my new home hub 3. The reason I wanted the upgrade from the hub 1 is because the broadband connection would drop and also the old hub would reset it self constantly.
    The new hub is much better in terms of not resetting itself, if i try and watch something on 4od etc, youtube, it feels like any stress and the braodband connection drops, I had this on the old hub but it feels like its happening more now.
    So much so I decided to make a paint version of my wiring so someone can maybe help me out.
    http://i144.photobucket.com/albums/r173/guysy1110/​routerproblem.png
    Sorry the paint image came out much smaller than I wanted.
    The main phone line is dowstairs in the lounge, its split into 2 using a 2 way splitter, one goes to the main phone which has a microfilter attached, the other plug leads up to the spare room and there a phone box (sorry not sure what its called) is in place, this box was split into another one because a long time ago there was a router that lived in the spare room (the split box is unused). Probably confusing people now, but the main box upstairs in the spare room is extended into my room and then a microfilter is used and then goes into the hub.
    The extension cable is FAR too long, possibly 10m of cable wound up and tucked behind the drawers. Could this be a problem? I guess so.
    So my main questions are, if both the router and main phone have new microfilters on, what other causes could keep my router dropping the broadband connection? the extension into my room is FAR too long possibly 10m which is wound up behind my drawers, first off im going to get a shorter cable. 
    Also the microfilter is closest to the hub, would it be better at the first source downstairs, or even in the spare room?
    Any suggestions would be great. thanks.

    Im reviving this thread, so far from the phone box upstairs Ive shortened the cable, It still goes into my room but now instead of having a ridiculous 15m amount of calbing unused Its a straight 3m from the other room to mine.
    This has slightly improoved things.
    However the hub still suffers and drops the broadband connection when under "stress" when the phone rings it sometimes drops, and when downloading files it drops halfway through if the file is large which is a massive pain.
    On the downstairs master socket I removed the facia and did a quiet line test on the inside socket, there was no noise. I used a corded phone. I wasnt sure if it mattered but I tested all other sockets using this method and none had any noise.
    I phoned BT and was advised to take the hub closest to the master socket, but if i do this I have no wireless card in my PC so cannot connect, The obvious option is to get a wireless card but that will cost money. As will buying the power lines.
    Any suggestions? I guess plugging the hub in downstairs and trying to connect to something is the best option.
    Any advice please?

  • BT Hub 2 Ethernet Connection Dropping

    My apologies I have not posted before and there is probably already messages likes this but I had trouble finding them. I have a BT Hub 2 which I have had since March this year. Its connected by ethernet cable not wireless. I has lately become very slow although I was lead to believe that the speed in our area has been increased !
    For the last 7 days my broadband constantly drops out and I am asked via BT connection pages to reset the hub anything up to 10 times a day as my broadband connection has been lost. I have called techincal help but dont seem to get very far. They just say its wireless interferance but how can it be I am NOT wireless I am via ethernet cable. I have done all they have suggested which is disconnect the whole thing and then reconnect and reset whenever I am asked, I have tested my phone line that appears okay, apparently there is no work on the lines being done in the area.  So I am at a loss but its driving me potty everytime I am online I get cut off and have to reset all over again to get back online.
    Has anyone experienced this with Ethernet cables ? Is it worth me replacing the Hub ? 
    Many thanks for reading
    Mel

    Hi, thankyou for responding. Okay yes to the first I have just changed ethernet port this morning. No to the second not replaced teh cable as yet. Test results from the speed test are at the end of this message. So far I have not been disconnected since changing the port today, however it remains to be seen how long it lasts. If it happens again I will get a new ethernet cable out of the box and replace the current one. After that I am not sure whats next, replace whole hub I guess. 
    If yourself or anyone else can decipher the test results as to whether this is good or bad I would be grateful.
    <script type="text/javascript">// paintProgressAndMessageOnBar(100,"The test has successfully completed" ); // </script> Test1 comprises of two tests
    1. Best Effort Test: -provides background information.
    Download Speed
    18363 Kbps
    0 Kbps
    21000 Kbps
    Max Achievable Speed
     Download speed achieved during the test was - 18363 Kbps
     For your connection, the acceptable range of speeds is 4000-21000 Kbps.
     Additional Information:
     Your DSL Connection Rate :22331 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
     IP Profile for your line is - 19000 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 11.62:21.54:66.84 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
    2. Upstream Test: -provides background information.
    Upload Speed
    737 Kbps
    0 Kbps
    888 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 737 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 888 Kbps

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Phone ring, connection drops & resets (How complex...

    So my extension may potentially have a problem as when the phone rings, my internet connection drops and resets.
    When I plug my phone in the extension socket, I hear frequency sounds and fizzles.
    Is it worth taking the front panel of the extension socket out? Do these problem occur due to a simple wiring misconnection / disconnection or is it more complicated within the wiring? Is it DIY-able?

    does the problem happen on any other socket ?????
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Infinity 2 BT Home Hub 3 connection dropping issue...

    Hello,
    For over 2 months now I have been experiencing problems with our Home Hub 3 restarting and dropping the connection.
    It car happen up to 6 times an hour or may be OK for up to 12 hours.
     We have had 3 new HH3 routers, three engineer visits, numerous speed checks, line checks (all OK) and calls to 08001114567. As of today nothing has resolved the issue.
    I have changed channel, have Openreach Modem & HH3 powered via a UPS, all connections have been checked and all leads changed. I have now lost all confidence in both Level 1 & Level 2 helpdesk. I am considering buying a non BT router to see if that overcomes the issues, but I don't see why I should have to, as I pay for a service from BT which I am not receiving.
    Can anyone offer any advise.

    HarrisonStephens infinity does not use ADSL filters just a filtered master socket installed by Openreach when infinity is installed
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I am unable to set up my new Time Capsule with my BT Home Hub - every time i connect the ethernet cable from Wan port to Home Hub, the internet signal drops

    Hi there -
    I've just purchased a new Time Capsule, and would like to set up a small home network with my Laptop, iMac and wireless printer. I'm following the first steps, but as soon as I connect an ethernet cable between the WAN port of the TC and the ethernet port of the HH, my BT internet connection drops out and I have to restart the HH. Upon which point it drops out again. The airport utility can see my TC, and gets as far as me typing in the new network name and setting up a password, but then it can't quite get through to the next stage. All the time it's just flashing amber.
    Please help!

    Setup the TC in bridge mode before you cannot it to the HH.
    Simply do the setup fully in isolation. And do it by ethernet.
    Setup wireless to create a wireless network.
    You can use either same SSID =Wireless name as the HH .. same security same password.
    Or use a different name and setup.. totally up to you.
    Update the TC and then plug it into the HH by ethernet.

  • My Internet Connection Dropping Issues...

    I too am having the occasional Internet connection dropping issues.  Phone and TV continue to work.
    Since I had Fios installed last November I am on my third ONT and 2nd router.  When I called in my latest drop yesterday the call center person told me I had a hardware issue because my computer had a valid IP address assigned.  I tried to teach her something about DHCP but she would not listen to me.  I asked her to please reboot the ONT and she refused because "nothing was indicating a problem with it".  Whatever...
    Each time the Internet goes out the router acts fat and happy.  I have full green on WAN Coax, and strangely enough, a flashing green Internet activity indicator.  Logging into the router shows that I am MOCA connected and assigned a WAN IP address.  But I can't get out past the router at all.  On the event that led to me getting a replacement router the lady said she could talk to the ONT just fine, but not the router.  We reset the router and ONT port numerous times and the connection finally came back up.
    I am not sure of the protocol between the ONT and router, but I think the ONT is keeping enough signal going to make the router "think" its happy, but then the ONT is not passing packets at some point.  After yesterdays call and the refusal to reset the ONT I just hung up on her and reset it myself.  Of course everything started working just fine...like I thought it would.
    So what is the issue here?  Is MOCA a mess?  Is an Ethernet connection to the ONT better?  I am utterly disgusted with this miserable system and can't afford to continue having these outages.
    I should also add the other wonderful features I have seen.  When I tried to powercycle the *new* router yesterday it decided to dump its entire config including my port forwarding.  Nice...  And I have given up using wireless because if I set the router for WPA it locks up so hard that it takes a master reset to get going again.
    Anyone have some advice on getting this system stable?

    I would try using a non-verizon router.  I used the Netgear router and it fixed my problem.  The Verizon router seem to be pieces of garbage and they over-hear.

  • BT Infinity Connection Dropping but BT refuse to a...

    Hi,
    So in September we got BT Infinity. It was a hassle and handled terribly by BT customer service but we eventually got it. It's been working fine for around five months but within the last few weeks we have been having connection issues.
    Over Easter I have spent over 10 hours on the phone to BT via my landline and mobile trying to get a solution, but all I have got is a repeated denial of my problems.
    On the 27th March I called BT to report that our connection had been repeatedly dropping over the past few weeks and a fault was opened. I was told I would be updated but no-one called back despite promises they would do.
    I called BT on the 28th March to follow up my issues but was met with an advisor who lacked knowledge in the issue and simply told me to continue monitoring my connection.
    I called BT on the 3rd April as there had been no improvement in my connection, which is dropping multiple times per day, and on this day 7 times. After going through the same repetitive questioning session about how I connect to the internet, a deep line test was run, and it was decisively concluded that there was a fault with the line within BT's retail servers. I was told this would be followed up and promised a call back on the 4th April.
    After I had not received a call back on the 4th April within the time allocated to me, I called BT where I was met with an awfully rude woman who had no interest in helping me and went on to suggest what I was saying was an outright lie and she categorically stated there had been no call back booked despite me having the text in front of me which confirmed it.
    After being told to 'continue monitoring my line', a slightly repetitive phrase favoured by BT Customer Service, I called back as instructed on the 8th April. Again, I went through a repetitive process before finally making some sort of progress and being sent a new home hub.
    My new home hub arrived on the 11th April and made no difference to my problem. I therefore called BT and spoke to an advisor who told me he could only assume the Home Hub was sent in error, as he was absolutely adamant it would make absolutely no difference to my situation. I was told to 'continue monitoring my connection' over the next few days but before he ended the call I asked him a number of questions, none of which were adequately answered.
    Why is our connection dropping? Rather than giving me an explanation as to why it is dropping, he told me that we are lucky it only drops a few times a day! He said 'everyone in the world suffers from a connection which drops multiple times per day' and that 'there is absolutely nothing we can do because there is no problem'. He told me about rate-adaptive lines, which according to him 'are used by every household in the world' and that these lines 'inevitably drop out up to five times a day, which is normal and acceptable'.
    So how many times can it drop before it's considered a fault? The basic answer I received is that there is no limit! It doesn't matter how many times it drops, it absolutely normal! Only if it drops '20-30+ times per day' is it considered a problem worth solving to BT.
    Why do you never call back (in particular, why did no-one call back on the 4th April, and why did an advisor accuse me of lying about the call back)? They said that when the issue is escalated from Level 1 to Level 2, it is impossible to see any contact between the customer and Level 1, so when the call back wasn't arranged as it should've been, there was no way BT could've known. He apologised for this and the way I was treated by his colleague.
    Why was a fault reported on the 3rd April? Why have I not been updated since? Simple answer from BT. There probably was no fault, that was probably also incorrectly opened. Note the key word probably. The advisor I talked to said he had no idea what happened in any of my previous calls and that there was no way he could find out why the fault was opened, or listen to the call (despite all calls being recorded). He said it was impossible for Level 2 to hear the content of any calls made with Level 1 and that it was 'impossible for an advisor to take notes for a call lasting more than half an hour'.
    I recieved a call back today on my mobile where I was told just to continue monitoring the fault. However I was also told, again, quite categorically, that there is nothing wrong and that he would happily send an engineer in three days but that 'he would be able to do absolutely nothing. It would be a waste of time'. The advisor also refused to give any details on how much this would cost and was desperate to end the call saying 'goodbye' despite me being mid sentence multiple times.
    I have now been told to 'continue monitoring my connection' and await another call back on Friday, by which point I will have wasted many more hours on the phone to BT.
    Your customer service is disgusting. Your lack of compassion and understanding is disgusting. The way you totally mislead customers is disgusting.
    And now for my top BT Operator quotes (or near quotes, as obviously no-one has any idea what was said in these calls, not even BT!):
    "If your temperature raised to 100 degrees celcius but then went back to normal, there would be no problem, it's the same with broadband"
    "Everyone in the world has a rate-adaptive line and everyone in the world should expect their line to drop"
    "If your line only drops 5 or 6 times a day there is no problem, you obviously should've known this before you signed up for Infinity"
    "There definitely is a fault.... there definitely isn't a fault" - the trademark conclusiveness of BT
    "We can limit the speed on the phone line, but it would have to be to 1mb" - this is despite absolutely contradictory help published by BT
    But despite these humorous moments, I have wasted a huge amount of time on the phone to BT.
    I have one simple demand. Stop the broadband from dropping multiple times per day. If you cannot do this, let us leave, as you are not meeting your contractual obligations and therefore we shouldn't have to either.
    And please... don't apologise for your colleague not calling back in the first minute of the phone call and then not call back.

    Hi Bryan,
    Like yourself and many, many other people who come to these forums - I have been experiencing the same problems. Constant disconnections, and recently, speed dropping to 4Mb in the Evenings (I'm supposed to be getting 74Mb).
    It's ridiculous with how many people are experiencing these problems and BT are blatently ignoring it. To add insult to injury, this was posted in February. A statement from BT basically saying "Well you're all gonna be having problems, but it's on you."
    Don't fret though, the moderators, and other people from the community can be fantastic help.
    Purchasing an Openreach modem, suggested by ray_dorset, I'll still be awaiting for the Huawei 612, V3b modem to arrive and hoping this will fix the drops in speed. I currently have an ECI modem fitted in, which has stopped the disconnects, but have not stopped the speed drops.
    For anyone reading this who is unfamiliar with modems as I was:
    As far as I know, there's currently two types of Openreach Modems. Every exchange is built with a certain "chipset" which will work best with these modems (explaining in simplistic terms and I could be very wrong, so I am happy to be corrected.)
    The Two Openreach Modems:
    Huawei 614
    ECI
    From the advice I have been given by the moderators, if you're new to BT Infinity, then your exchange may have only recently been built, which is then most likely to have a chipset which will work better with Huawei modems. I'm about to find out this by next week.
    If, in some horrible scenario it doesn't work and the speed is still constantly dropping, then you may need to fork out and purchase a new router (BUT KEEP THE MODEM). Many people have said their internet has been fixed by doing this.
    One of the things I did find pretty hillarious however, is that I did call up BT the other night due to having terrible connections. He told me to take out my modem and just use the home hub 5. He then kept telling me to change a few settings on the HH5 and run a speedtest. Every, single, time we changed something - the speed would get lower and lower, followed by an "Uhhh, monitor your speed over the course of this week and then we'll call you back."
    I'm sorry, but BT customer service have no idea how to fix this, so don't waste your time ringing them. I genuinely feel bad for them too, they have to put up with our **bleep** while the engineers at BT who work on the firmware for the HH5 can't be arsed to try and fix it any further.
    Seriously, mate - just try the steps above, come to the forums if you need help because you're more than likely to get a better answer. I know it sucks not being able to call up BT because they're just going to give you a bunch of BS, but if everyone who had a complaint on this forum worked for BT tech support, maybe there'd be more satisfied customers.

  • Wifi connection drops down. [SOLVED]

    Hi, I'm having some issues with the wifi, in my notebook lenovo b5070. The main problem is that the connection drops down after 20, 30 minutes. I tried to change from NetworkManager to Wicd, but that didn't change anything. I also tried to create a profile and connect me through netctl, but again that didn't change anything. Other issues that I'm having are: Sometimes I can't even connect to the wifi, or if I can connect finally, and I try to request some website, the browser keeps idle and finally shows a "Server not found" message. Also the wifi signal seems pretty fine. I also tried change the tx, rts to the max with iwconfig, but this didn't change anything. I'm running out of ideas. Any idea?
    Here is some info:
    [astinx@compu ~]$ lsusb
    Bus 003 Device 002: ID 8087:8000 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 005: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
    Bus 001 Device 004: ID 0bda:b728 Realtek Semiconductor Corp.
    Bus 001 Device 003: ID 0c45:6514 Microdia
    Bus 001 Device 002: ID 0458:012b KYE Systems Corp. (Mouse Systems)
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    [astinx@compu ~]$ iwconfig
    wlp9s0 IEEE 802.11bgn ESSID:"albele"
    Mode:Managed Frequency:2.437 GHz Access Point: 00:1D:7E:6A:C4:67
    Bit Rate=54 Mb/s Tx-Power=20 dBm
    Retry short limit:7 RTS thr=2347 B Fragment thr:off
    Power Management:off
    Link Quality=52/70 Signal level=-58 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    lo no wireless extensions.
    enp8s0 no wireless extensions.
    [astinx@compu ~]$ ifconfig
    enp8s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether f0:76:1c:0c:12:99 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    inet6 ::1 prefixlen 128 scopeid 0x10<host>
    loop txqueuelen 0 (Local Loopback)
    RX packets 336 bytes 29472 (28.7 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 336 bytes 29472 (28.7 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    wlp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.1.111 netmask 255.255.255.0 broadcast 192.168.1.255
    inet6 fe80::fa77:2850:54a4:4213 prefixlen 64 scopeid 0x20<link>
    ether 38:b1:db:4f:f7:33 txqueuelen 1000 (Ethernet)
    RX packets 192 bytes 52270 (51.0 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 1297 bytes 138803 (135.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    [astinx@compu ~]$ lspci -k
    00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: i915
    Kernel modules: i915
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci
    00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: mei_me
    Kernel modules: mei_me
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel modules: i2c_i801
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    Subsystem: Lenovo Device 3801
    Kernel driver in use: rtsx_pci
    Kernel modules: rtsx_pci
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
    Subsystem: Lenovo Device 380e
    Kernel driver in use: r8169
    Kernel modules: r8169
    09:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
    Subsystem: Lenovo Device b736
    Kernel driver in use: rtl8723be
    Kernel modules: rtl8723be
    [astinx@compu ~]$ lsusb
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009735ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000097360000-0x0000000097b5ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000097b60000-0x000000009c36efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009c36f000-0x000000009c56efff] type 20
    [ 0.000000] BIOS-e820: [mem 0x000000009c56f000-0x000000009cebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
    [ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
    [ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
    [ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3b000) (14MB)
    [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3b000-0x0000000037926000) (873MB)
    [ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000037926000-0x0000000037c8b000) (3MB)
    [ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037c8b000-0x000000006ea96000) (878MB)
    [ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000006ea96000-0x0000000094b70000) (608MB)
    [ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000094b70000-0x0000000094b90000) (0MB)
    [ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000094b90000-0x00000000968e3000) (29MB)
    [ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000968e3000-0x0000000097360000) (10MB)
    [ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000097360000-0x0000000097b60000) (8MB)
    [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097b60000-0x0000000097d52000) (1MB)
    [ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000097d52000-0x0000000097d6f000) (0MB)
    [ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097d6f000-0x000000009951f000) (23MB)
    [ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009951f000-0x0000000099f09000) (9MB)
    [ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f09000-0x0000000099f0e000) (0MB)
    [ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f0e000-0x0000000099f14000) (0MB)
    [ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f14000-0x0000000099f16000) (0MB)
    [ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f16000-0x0000000099f3f000) (0MB)
    [ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f3f000-0x0000000099f40000) (0MB)
    [ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f40000-0x000000009a08e000) (1MB)
    [ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a08e000-0x000000009a094000) (0MB)
    [ 0.000000] efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a094000-0x000000009a095000) (0MB)
    [ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a095000-0x000000009a097000) (0MB)
    [ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a097000-0x000000009a09b000) (0MB)
    [ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a09b000-0x000000009a09c000) (0MB)
    [ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a09c000-0x000000009a0d5000) (0MB)
    [ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0d5000-0x000000009a0d7000) (0MB)
    [ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0d7000-0x000000009a0dc000) (0MB)
    [ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0dc000-0x000000009a0df000) (0MB)
    [ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0df000-0x000000009a0e7000) (0MB)
    [ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0e7000-0x000000009a0ea000) (0MB)
    [ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ea000-0x000000009a0eb000) (0MB)
    [ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0eb000-0x000000009a0ef000) (0MB)
    [ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ef000-0x000000009a193000) (0MB)
    [ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a193000-0x000000009a194000) (0MB)
    [ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a194000-0x000000009bd6f000) (27MB)
    [ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009bd6f000-0x000000009bf51000) (1MB)
    [ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009bf51000-0x000000009bf5b000) (0MB)
    [ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bf5b000-0x000000009c36f000) (4MB)
    [ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c36f000-0x000000009c56f000) (2MB)
    [ 0.000000] efi: mem47: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c56f000-0x000000009cabf000) (5MB)
    [ 0.000000] efi: mem48: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009cabf000-0x000000009cebf000) (4MB)
    [ 0.000000] efi: mem49: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
    [ 0.000000] efi: mem50: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
    [ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
    [ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000015f600000) (1526MB)
    [ 0.000000] efi: mem53: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem54: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
    [ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem56: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem57: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem59: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem60: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem61: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem62: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffa00000-0x0000000100000000) (6MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20384/Lenovo B50-70, BIOS 9DCN21WW(V2.02) 06/27/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
    [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
    [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
    [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
    [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
    [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
    [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9735ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x971fffff] page 2M
    [ 0.000000] [mem 0x97200000-0x9735ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x97b60000-0x9c36efff]
    [ 0.000000] [mem 0x97b60000-0x97bfffff] page 4k
    [ 0.000000] [mem 0x97c00000-0x9c1fffff] page 2M
    [ 0.000000] [mem 0x9c200000-0x9c36efff] page 4k
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37926000-0x37c8afff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x000000009CFE7000 00DA18 (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
    [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x000000009CFE6000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFE5000 000700 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x000000009CFE3000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: LPIT 0x000000009CFE2000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 0x000000009CFE0000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 0x000000009CFDF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFDA000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD5000 003537 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 0x000000009CFD4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x9735ffff]
    [ 0.000000] node 0: [mem 0x97b60000-0x9c36efff]
    [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x15f5fffff]
    [ 0.000000] On node 0 totalpages: 1028342
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 24 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9902 pages used for memmap
    [ 0.000000] DMA32 zone: 633712 pages, LIFO batch:31
    [ 0.000000] Normal zone: 6104 pages used for memmap
    [ 0.000000] Normal zone: 390656 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x97360000-0x97b5ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c36f000-0x9c56efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c56f000-0x9cebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82880 r8192 d31808 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012248
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909256K/4113368K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 204112K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:760 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.377 MHz processor
    [ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.28 BogoMIPS (lpj=7981256)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20140926
    [ 0.018809] ACPI: All ACPI Tables successfully acquired
    [ 0.039185] Security Framework initialized
    [ 0.039194] Yama: becoming mindful.
    [ 0.039553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.040627] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.041121] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.041129] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.041378] Initializing cgroup subsys memory
    [ 0.041384] Initializing cgroup subsys devices
    [ 0.041386] Initializing cgroup subsys freezer
    [ 0.041389] Initializing cgroup subsys net_cls
    [ 0.041391] Initializing cgroup subsys blkio
    [ 0.041417] CPU: Physical Processor ID: 0
    [ 0.041419] CPU: Processor Core ID: 0
    [ 0.041424] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.042651] mce: CPU supports 7 MCE banks
    [ 0.042667] CPU0: Thermal monitoring enabled (TM1)
    [ 0.042682] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.042812] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.043856] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.045955] ftrace: allocating 20931 entries in 82 pages
    [ 0.058119] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.091151] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
    [ 0.091159] TSC deadline timer enabled
    [ 0.091185] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.091212] ... version: 3
    [ 0.091214] ... bit width: 48
    [ 0.091215] ... generic registers: 4
    [ 0.091216] ... value mask: 0000ffffffffffff
    [ 0.091217] ... max period: 0000ffffffffffff
    [ 0.091218] ... fixed-purpose events: 3
    [ 0.091220] ... event mask: 000000070000000f
    [ 0.111308] x86: Booting SMP configuration:
    [ 0.111311] .... node #0, CPUs: #1
    [ 0.125959] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.132620] #2 #3
    [ 0.168461] x86: Booted up 1 node, 4 CPUs
    [ 0.168465] smpboot: Total of 4 processors activated (19162.14 BogoMIPS)
    [ 0.173479] devtmpfs: initialized
    [ 0.176167] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [ 0.177292] pinctrl core: initialized pinctrl subsystem
    [ 0.177339] RTC time: 15:39:50, date: 02/08/15
    [ 0.177475] NET: Registered protocol family 16
    [ 0.189973] cpuidle: using governor ladder
    [ 0.203321] cpuidle: using governor menu
    [ 0.203363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.203364] ACPI: bus type PCI registered
    [ 0.203366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.203456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.203459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.203881] PCI: Using configuration type 1 for base access
    [ 0.217092] ACPI: Added _OSI(Module Device)
    [ 0.217094] ACPI: Added _OSI(Processor Device)
    [ 0.217096] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.217098] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.222927] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.237854] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.250192] ACPI: Dynamic OEM Table Load:
    [ 0.250204] ACPI: SSDT 0xFFFF880158F80C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.263714] ACPI: Dynamic OEM Table Load:
    [ 0.263726] ACPI: SSDT 0xFFFF880158F59800 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.276877] ACPI: Dynamic OEM Table Load:
    [ 0.276887] ACPI: SSDT 0xFFFF880158E92800 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.303769] ACPI: Interpreter enabled
    [ 0.303781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.303790] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.303817] ACPI: (supports S0 S3 S4 S5)
    [ 0.303818] ACPI: Using IOAPIC for interrupt routing
    [ 0.303851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.416427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.416435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.417003] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.417721] PCI host bridge to bus 0000:00
    [ 0.417725] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.417728] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.417730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.417732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.417734] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.417736] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.417738] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.417740] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.417742] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.417744] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.417746] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.417748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.417750] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.417760] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.417946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.417962] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
    [ 0.417971] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.417977] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 0.418153] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.418164] pci 0000:00:03.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit]
    [ 0.418365] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.418385] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit]
    [ 0.418450] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.418565] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.418612] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.418635] pci 0000:00:16.0: reg 0x10: [mem 0xb2618000-0xb261801f 64bit]
    [ 0.418711] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.418877] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.418893] pci 0000:00:1b.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit]
    [ 0.418968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.419082] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.419126] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.419198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.419353] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
    [ 0.419428] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.419584] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.419659] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.419813] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.419888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.420052] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.420074] pci 0000:00:1d.0: reg 0x10: [mem 0xb261c000-0xb261c3ff]
    [ 0.420172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.420309] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.420363] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.420631] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.420647] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
    [ 0.420655] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
    [ 0.420663] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
    [ 0.420671] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
    [ 0.420678] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 0.420686] pci 0000:00:1f.2: reg 0x24: [mem 0xb261b000-0xb261b7ff]
    [ 0.420728] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.420878] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.420894] pci 0000:00:1f.3: reg 0x10: [mem 0xb2619000-0xb26190ff 64bit]
    [ 0.420915] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
    [ 0.421136] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.421234] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
    [ 0.421269] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1000fff]
    [ 0.421424] pci 0000:02:00.0: supports D1 D2
    [ 0.421427] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
    [ 0.421466] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.427022] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
    [ 0.427027] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.427030] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
    [ 0.427036] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.427119] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.427139] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
    [ 0.427169] pci 0000:08:00.0: reg 0x18: [mem 0xb2504000-0xb2504fff 64bit]
    [ 0.427188] pci 0000:08:00.0: reg 0x20: [mem 0xb2500000-0xb2503fff 64bit]
    [ 0.427291] pci 0000:08:00.0: supports D1 D2
    [ 0.427293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.427358] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 0.433685] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.433689] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.433693] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
    [ 0.433780] pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
    [ 0.433803] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
    [ 0.433837] pci 0000:09:00.0: reg 0x18: [mem 0xb2400000-0xb2403fff 64bit]
    [ 0.433959] pci 0000:09:00.0: supports D1 D2
    [ 0.433961] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.433994] pci 0000:09:00.0: System wakeup disabled by ACPI
    [ 0.443696] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.443699] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.443703] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
    [ 0.443740] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.497639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497902] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497953] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.498004] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.498197] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.498242] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
    [ 0.498365] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.498368] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.498372] vgaarb: loaded
    [ 0.498373] vgaarb: bridge control possible 0000:00:02.0
    [ 0.498519] PCI: Using ACPI for IRQ routing
    [ 0.504636] PCI: pci_cache_line_size set to 64 bytes
    [ 0.504686] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.504688] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.504689] e820: reserve RAM buffer [mem 0x97360000-0x97ffffff]
    [ 0.504691] e820: reserve RAM buffer [mem 0x9c36f000-0x9fffffff]
    [ 0.504693] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [ 0.504695] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
    [ 0.504822] NetLabel: Initializing
    [ 0.504823] NetLabel: domain hash size = 128
    [ 0.504824] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.504838] NetLabel: unlabeled traffic allowed by default
    [ 0.504863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.504870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.506900] Switched to clocksource hpet
    [ 0.512939] pnp: PnP ACPI init
    [ 0.513126] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.513129] system 00:00: [io 0x0500-0x053f] has been reserved
    [ 0.513132] system 00:00: [io 0xffff] has been reserved
    [ 0.513134] system 00:00: [io 0xffff] has been reserved
    [ 0.513136] system 00:00: [io 0xffff] has been reserved
    [ 0.513139] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.513141] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.513145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.513202] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.513256] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.513259] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.513288] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.513351] pnp 00:04: Plug and Play ACPI device, IDs SYN2b39 SYN0700 SYN0002 PNP0f13 (active)
    [ 0.563797] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.563800] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.563802] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.563804] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.563807] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.563809] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.563811] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.563813] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.563816] system 00:05: [mem 0xff001000-0xff0010ff] has been reserved
    [ 0.563818] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.563821] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.563823] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [ 0.563825] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.563829] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.564138] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.564571] pnp: PnP ACPI: found 7 devices
    [ 0.571172] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.571185] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
    [ 0.571188] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.571193] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
    [ 0.571197] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.571203] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.571206] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.571211] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
    [ 0.571218] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.571221] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.571226] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
    [ 0.571235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.571237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.571239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.571241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.571243] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.571245] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.571247] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.571249] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.571251] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.571253] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.571255] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.571257] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
    [ 0.571260] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
    [ 0.571261] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb1ffffff]
    [ 0.571264] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.571266] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.571268] pci_bus 0000:08: resource 1 [mem 0xb2500000-0xb25fffff]
    [ 0.571270] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
    [ 0.571272] pci_bus 0000:09: resource 1 [mem 0xb2400000-0xb24fffff]
    [ 0.571305] NET: Registered protocol family 2
    [ 0.571528] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.571618] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.571715] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.571736] TCP: reno registered
    [ 0.571744] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.571763] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.571824] NET: Registered protocol family 1
    [ 0.571842] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.583761] PCI: CLS 64 bytes, default 64
    [ 0.583812] Unpacking initramfs...
    [ 0.665763] Freeing initrd memory: 3476K (ffff880037926000 - ffff880037c8b000)
    [ 0.665775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.665778] software IO TLB [mem 0x90b70000-0x94b70000] (64MB) mapped at [ffff880090b70000-ffff880094b6ffff]
    [ 0.665818] Simple Boot Flag at 0x44 set to 0x1
    [ 0.666015] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.666080] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666087] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666095] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666104] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666156] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.666187] Scanning for low memory corruption every 60 seconds
    [ 0.666541] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.666577] Initialise system trusted keyring
    [ 0.666959] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.668721] zpool: loaded
    [ 0.668726] zbud: loaded
    [ 0.668990] VFS: Disk quotas dquot_6.5.2
    [ 0.669031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.669172] msgmni has been set to 7751
    [ 0.669234] Key type big_key registered
    [ 0.669453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.669499] io scheduler noop registered
    [ 0.669502] io scheduler deadline registered
    [ 0.669540] io scheduler cfq registered (default)
    [ 0.669759] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.669935] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.670110] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.670269] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.670374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.670379] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.670396] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.670398] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670402] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.670419] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.670421] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670424] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.670440] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.670442] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670446] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.670466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.670499] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 0.670533] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    [ 0.670539] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.670583] efifb: probing for efifb
    [ 0.670605] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
    [ 0.670606] efifb: mode is 1366x768x32, linelength=5504, pages=1
    [ 0.670607] efifb: scrolling: redraw
    [ 0.670609] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.674675] Console: switching to colour frame buffer device 170x48
    [ 0.678177] fb0: EFI VGA frame buffer device
    [ 0.678188] intel_idle: MWAIT substates: 0x11142120
    [ 0.678190] intel_idle: v0.4 model 0x45
    [ 0.678191] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.678506] GHES: HEST is not enabled!
    [ 0.678574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.679056] Linux agpgart interface v0.103
    [ 0.679108] rtc_cmos 00:01: RTC can wake from S4
    [ 0.679243] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.679273] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.679287] Intel P-state driver initializing.
    [ 0.679431] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.679696] TCP: cubic registered
    [ 0.679919] NET: Registered protocol family 10
    [ 0.680456] NET: Registered protocol family 17
    [ 0.681245] Loading compiled-in X.509 certificates
    [ 0.681277] registered taskstats version 1
    [ 0.682279] Magic number: 3:299:689
    [ 0.682435] rtc_cmos 00:01: setting system clock to 2015-02-08 15:39:50 UTC (1423409990)
    [ 0.682615] PM: Checking hibernation image partition UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae
    [ 0.682621] PM: Hibernation image not present or could not be loaded.
    [ 0.684595] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 0.684599] Write protecting the kernel read-only data: 8192k
    [ 0.688817] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 0.690614] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 0.702916] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.718779] sdhci: Secure Digital Host Controller Interface driver
    [ 0.718781] sdhci: Copyright(c) Pierre Ossman
    [ 0.720168] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
    [ 0.726783] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.726825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.727977] ACPI: bus type USB registered
    [ 0.727998] usbcore: registered new interface driver usbfs
    [ 0.728005] usbcore: registered new interface driver hub
    [ 0.728031] usbcore: registered new device driver usb
    [ 0.728826] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.728833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.728904] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.728919] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
    [ 0.729105] hub 1-0:1.0: USB hub found
    [ 0.729116] hub 1-0:1.0: 9 ports detected
    [ 0.729254] rtsx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.729269] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
    [ 0.729962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.730134] ehci-pci: EHCI PCI platform driver
    [ 0.731658] SCSI subsystem initialized
    [ 0.732538] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.732545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.732737] hub 2-0:1.0: USB hub found
    [ 0.732750] hub 2-0:1.0: 4 ports detected
    [ 0.733058] libata version 3.00 loaded.
    [ 0.733952] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.733959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.733972] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.737882] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.737904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261c000
    [ 0.747112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.747298] hub 3-0:1.0: USB hub found
    [ 0.747312] hub 3-0:1.0: 2 ports detected
    [ 0.747491] ahci 0000:00:1f.2: version 3.0
    [ 0.747673] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [ 0.747695] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.760531] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
    [ 0.760537] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
    [ 0.761117] scsi host0: ahci
    [ 0.761280] scsi host1: ahci
    [ 0.761400] scsi host2: ahci
    [ 0.761527] scsi host3: ahci
    [ 0.761587] ata1: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b100 irq 46
    [ 0.761590] ata2: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b180 irq 46
    [ 0.761591] ata3: DUMMY
    [ 0.761592] ata4: DUMMY
    [ 0.763988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.054094] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.080772] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.090784] usb 1-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.108052] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
    [ 1.108057] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.147102] ata1.00: configured for UDMA/133
    [ 1.147357] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
    [ 1.178260] hub 3-1:1.0: USB hub found
    [ 1.178324] hub 3-1:1.0: 8 ports detected
    [ 1.267676] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.269353] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.271432] usbcore: registered new interface driver usbhid
    [ 1.271435] usbhid: USB HID core driver
    [ 1.427737] usb 1-6: new high-speed USB device number 3 using xhci_hcd
    [ 1.467751] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.472648] ata2.00: ATAPI: PLDS DVD-RW DA8A5SH, RL61, max UDMA/100
    [ 1.473654] ata2.00: configured for UDMA/100
    [ 1.487478] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A5SH RL61 PQ: 0 ANSI: 5
    [ 1.506690] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.506695] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.506762] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.506765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.506805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.526586] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.526589] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.526753] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.576727] sda: sda1 sda2 sda3 sda4
    [ 1.577520] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.668501] tsc: Refined TSC clocksource calibration: 2394.458 MHz
    [ 1.834689] usb 1-7: new full-speed USB device number 4 using xhci_hcd
    [ 1.866481] PM: Starting manual resume from disk
    [ 1.866486] PM: Hibernation image partition 8:2 present
    [ 1.866488] PM: Looking for hibernation image.
    [ 1.866742] PM: Image not found (code -22)
    [ 1.866745] PM: Hibernation image not present or could not be loaded.
    [ 2.008615] usb 1-7: No LPM exit latency info found, disabling LPM.
    [ 2.168326] usb 1-8: new full-speed USB device number 5 using xhci_hcd
    [ 2.200127] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.668929] Switched to clocksource tsc
    [ 2.998993] random: nonblocking pool is initialized
    [ 5.035645] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 7.983617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 8.001442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
    [ 8.001451] ACPI: Power Button [PWRB]
    [ 8.001539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
    [ 8.001584] ACPI: Lid Switch [LID0]
    [ 8.001677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 8.001681] ACPI: Power Button [PWRF]
    [ 8.067218] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
    [ 8.169733] thermal LNXTHERM:00: registered as thermal_zone0
    [ 8.169739] ACPI: Thermal Zone [TZ00] (29 C)
    [ 8.239918] ACPI: Battery Slot [BAT1] (battery present)
    [ 8.270385] ACPI: AC Adapter [ACAD] (on-line)
    [ 8.341145] [drm] Initialized drm 1.1.0 20060810
    [ 8.435780] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
    [ 8.435788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.524972] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
    [ 8.571862] [drm] Memory usable by graphics device = 2048M
    [ 8.571868] checking generic (a0000000 410000) vs hw (a0000000 10000000)
    [ 8.571870] fb: switching to inteldrmfb from EFI VGA
    [ 8.571892] Console: switching to colour dummy device 80x25
    [ 8.571969] [drm] Replacing VGA console driver
    [ 8.590169] i915 0000:00:02.0: irq 48 for MSI/MSI-X
    [ 8.590182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 8.590184] [drm] Driver supports precise vblank timestamp query.
    [ 8.590211] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 8.648474] fbcon: inteldrmfb (fb0) is primary device
    [ 8.665898] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 8.665971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 8.665996] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
    [ 8.789354] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0458:012B.0001/input/input7
    [ 8.789415] hid-generic 0003:0458:012B.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
    [ 8.812071] media: Linux media interface: v0.10
    [ 8.833777] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 8.840567] Linux video capture interface: v2.00
    [ 8.897231] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6514)
    [ 8.929823] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
    [ 8.929908] usbcore: registered new interface driver uvcvideo
    [ 8.929909] USB Video Class driver (1.1.1)
    [ 9.036891] cfg80211: Calling CRDA to update world regulatory domain
    [ 9.056738] Bluetooth: Core ver 2.19
    [ 9.056751] NET: Registered protocol family 31
    [ 9.056751] Bluetooth: HCI device and connection manager initialized
    [ 9.056757] Bluetooth: HCI socket layer initialized
    [ 9.056758] Bluetooth: L2CAP socket layer initialized
    [ 9.056766] Bluetooth: SCO socket layer initialized
    [ 9.348730] usbcore: registered new interface driver btusb
    [ 9.452303] iTCO_vendor_support: vendor-support=0
    [ 9.452955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 9.452990] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 9.453081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 9.494632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 9.494637] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 9.501333] r8169 0000:08:00.0: irq 49 for MSI/MSI-X
    [ 9.501800] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90010788000, f0:76:1c:0c:12:99, XID 10900800 IRQ 49
    [ 9.501802] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 9.582307] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
    [ 9.640127] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.640351] rtlwifi: rtlwifi: wireless switch is on
    [ 9.653001] mousedev: PS/2 mouse device common for all mice
    [ 9.667517] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
    [ 9.686347] r8169 0000:08:00.0 enp8s0: renamed from eth0
    [ 9.708662] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.727739] Console: switching to colour frame buffer device 170x48
    [ 9.730327] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 9.730328] i915 0000:00:02.0: registered panic notifier
    [ 9.737976] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
    [ 9.743445] AVX2 version of gcm_enc/dec engaged.
    [ 9.743448] AES CTR mode by8 optimization enabled
    [ 9.745577] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
    [ 10.040841] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 10.040848] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.040851] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 10.040852] sound hdaudioC1D0: mono: mono_out=0x0
    [ 10.040854] sound hdaudioC1D0: inputs:
    [ 10.040857] sound hdaudioC1D0: Mic=0x19
    [ 10.040859] sound hdaudioC1D0: Internal Mic=0x12
    [ 10.046345] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
    [ 10.046446] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
    [ 10.046909] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [ 10.047361] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
    [ 10.047575] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
    [ 10.047649] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
    [ 10.097496] rtl8723be 0000:09:00.0 wlp9s0: renamed from wlan0
    [ 10.655545] cfg80211: World regulatory domain updated:
    [ 10.655549] cfg80211: DFS Master region: unset
    [ 10.655550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.655553] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655555] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655559] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655561] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 10.655563] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 10.655564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655566] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 10.732705] intel_rapl: Found RAPL domain package
    [ 10.732711] intel_rapl: Found RAPL domain core
    [ 10.732714] intel_rapl: Found RAPL domain uncore
    [ 10.732717] intel_rapl: Found RAPL domain dram
    [ 10.844302] Adding 4009760k swap on /dev/sda2. Priority:-1 extents:1 across:4009760k FS
    [ 13.353211] systemd-journald[146]: Received request to flush runtime journal from PID 1
    [ 18.647280] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 18.647284] Bluetooth: BNEP filters: protocol multicast
    [ 18.647293] Bluetooth: BNEP socket layer initialized
    [ 21.632791] r8169 0000:08:00.0 enp8s0: link down
    [ 83.137005] wlp9s0: authenticate with 00:1d:7e:6a:c4:67
    [ 83.729985] wlp9s0: send auth to 00:1d:7e:6a:c4:67 (try 1/3)
    [ 83.731584] wlp9s0: authenticated
    [ 83.731753] rtl8723be 0000:09:00.0 wlp9s0: disabling HT as WMM/QoS is not supported by the AP
    [ 83.731757] rtl8723be 0000:09:00.0 wlp9s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 83.734174] wlp9s0: associate with 00:1d:7e:6a:c4:67 (try 1/3)
    [ 83.737516] wlp9s0: RX AssocResp from 00:1d:7e:6a:c4:67 (capab=0x411 status=0 aid=3)
    [ 83.737660] wlp9s0: associated
    [astinx@compu ~]$ systemctl status
    ● compu
    State: running
    Jobs: 0 queued
    Failed: 0 units
    Since: dom 2015-02-08 13:47:04 ART; 24min ago
    CGroup: /
    ├─1 /sbin/init
    ├─system.slice
    │ ├─dbus.service
    │ │ └─301 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    │ ├─org.cups.cupsd.service
    │ │ └─299 /usr/bin/cupsd -l
    │ ├─ModemManager.service
    │ │ └─303 /usr/bin/ModemManager
    │ ├─wpa_supplicant.service
    │ │ └─346 /usr/bin/wpa_supplicant -u
    │ ├─lightdm.service
    │ │ ├─314 /usr/bin/lightdm
    │ │ └─329 /usr/bin/Xorg.bin :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
    │ ├─accounts-daemon.service
    │ │ └─331 /usr/lib/accountsser

    So long I tried as Gusar said to loading the rtl8723b module with those params:
    sudo modprobe rtl8723be fwlps=0
    sudo modprobe rtl8723be ips=0
    So far by now, the connection hasn't dropped (one hour since I made the change)
    But is quite strange that when I do
    [astinx@compu ~]$ more /sys/module/rtl8723be/parameters/ips
    Y
    I mean, the parameters changed or not? I also tried with setting with N instead of 0.
    EDIT:
    The drop downs come back shortly after. I find quite strange that I cannot manage the power from iwconfig
    [astinx@compu ~]$ sudo iwconfig wlp9s0 power off
    [sudo] password for astinx:
    Error for wireless request "Set Power Management" (8B2C) :
    SET failed on device wlp9s0 ; Operation not supported.
    Last edited by astinx (2015-02-08 21:46:47)

  • Mac OS X lion 10.7.3 Wi-Fi connection Drop Issue

    Hi All,
      I've iMAC OS X Lion 10.7.3 latest version desktop. For couple of months, I'm dealing with dropping wi-fi connection during working. I've look at all the forums and discussions and tried many things to solve the issuse, however, issue still exist.
       Every a few minutes, even during surfing though internet pages, wi-fi connection drops. When you look at the signal level etc.. everything is seems to be fine, but it is not possible to connect internet after close-open wi-fi.
       For a while, connection drop happens again.
       I do not understand why Apple does not give a fix for this while most the customer having such an issue.
      Any one having any idea how to solve this ?
    Regards
    Gokcer

    I have a similar problem.  My Macbook Pro won't keep a constant wi-fi connection, becuase it continues to seek alternative networks even after locking onto a strong signal.  I've reset preferences and started from scratch with all the settings and let the Mac set them by itself, but still it does the seeking.  At home I used to have a direct LAN into my Airport Extreme, but now I use wi-fi on 4G/LTE and I've tried the computer with and without the Airport Extreme, with and without a Cradlepoint, and with various channels and security levels. 
    As has been document probably hundreds of times in these forums, Macbook Pros (my model) and some other Macs have had this issue from either 10.7.2 or 10.7.3 (I've got 10.7.4 right now).  I'm glad you found a solution to your problem, but for the hundreds or thousands of us who've had this problem since last August with no solution from Apple, it's quite frustrating.  I know it's not politically correct to blame the computer when it's been given a defective upgrade with Lion, but let's call it what it is.  I'll side with the numbers.  Either a sudden batch of defective routers showed up from Taiwan, and a group of late 2008 and 2009 Macbook Pros bought them all en masse, or it's the software. 
    So if you still have problems after you get a clear signal, start sending messages to Apple to get it fixed for all of us.  I bring this up for you as an alternative, as I noticed you were running 10.7.3, and the problems started somewhere around 10.7.2 or 10.7.3.  Something to keep an eye on. 

  • Connection drops and other problems

    I've given up with getting any sense from the Indian call centres so hoping for some enlightenment here!
    I've had the unlimited total broadband package since April 2010 and have had trouble-free usage right up to about a month ago. Now the service is just awful and I'm getting the following problems:
    Broadband connection drops sporadically. Some days it'll be fine and stable, but others it's flakey - for instance it's dropped 3 times today already. Sometimes I'll get an orange light on the BT hub, but at other times it's showing all blue, although the connection has gone. Sometimes resetting the hub fixes it for awhile and sometimes it doesn't and connection comes back all on its own. Today I've had to reset the hub twice already!
    At times I'll have a connection, but only to certain types of traffic. For instance I find that I can quite often do peer-to-peer stuff such as instant message, but all web browsing times out.
    Speeds bounce around all over the place. I'm in a rural area so speeds have never been stellar, but at times it'll suddenly start crawling and can take 10-15 seconds to load a simple page like google.co.uk
    The biggest issue I have is that my local exchange has BT wholesale as the sole provider, so even if I move ISPs it'll still be the same service, but I'll just have a middle man to deal with. It's particularly frustrating as I work from home and my office is hundreds of miles away so I absolutely rely on a good broadband connection for my living!
    Does anyone have any ideas on what these issues could be?  Much thanks in advance.

    The links:
    Home Hub: http://192.168.1.254/index.cgi?active_page=9116 << it only works if you have a Home Hub 2.0+ and remember to type your password in!
    Speedtest: Use this link http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 as it will also help you diagnose and give you a list of solutions afterwards, it does incorporate the http://www.speedtester.bt.com one though as well.
    Regards Edd
    Check your Line
    BT Speedtester

  • WRT54GL Connection drops and freezes

    Hi,
    I just recently purchased WRT54GL and I've been having an issue with it. Whenever I'm downloading (both regular download and progress download on you tube for e.g.), and I'm not browsing or active with internet explorer, it drops the connection, even worse, it freezes (idle) for sometime and back in a very low speed. Sometimes it doesn't come back up until I open an IE. It causes the downloads to fail every single time! I opened the Local Area Connection and i guessed it right, it does drop and stop so very often.
    I tricked it with going "forward" and "back" on my IE to browse between two websites just to keep the connection "alive" so that the download doesn't get disconnected. I checked connecting my modem directly to the computer without the router and it worked great.
    I have Comcast and Vonage connection.
    if someone could help, I would very much appreciate it.
    Thanks all, :-)

    Your router needs to be Upgraded, Download the Firmware from here ,
    Follow these steps to upgrade the firmware on the device: -
    Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
    Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...Check if this works for you...

  • Hub 3 cant connect to Apple Products wirelessly

    Just had to change my hub as it kept dropping out but the new one will not allow any of my apple products to connect wirelessly.  Spoken endlessly to BT tech dept on about the 4th person and hours later someone altered my channel to 11 and said this should work it did momentarily but now wont and I still cannot connect.  Tried everything, turning and resetting hub, resetting apple network settings but nothing seems to work and ideas...?  thanks

    you could try a factory reset of the hub but there is no real reason for your devices not to connect to the hub
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Bb curve keeps resetting

    HELP
    My curve asked for a reset after downloading a new app but now it wont start and just keeps restting itself
    what do i do???

    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry.
    Find the application you've just installed and UNcheck it to NOT install.
    Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • How to transfer voice memos from iphone to computer since iOS7 update

    Since upgrading to iOS 7 voice memos are no longer being transfered from my phone to my computer when I plug it in. This was a simple, automated process in the past, now I can't seem to get it work at all. Does anybody out there know if Apple dropped

  • IMac G5 w/iSight With A Weird Circle

    I'm having an odd problem with my 20" iMac. I bought a new HDD and I'm not able to get to the desktop so I can install it. It seems I've tried everything but so far nothing works. Here's the problem: no matter what key I hold down, or whether I have

  • KNOWN ISSUE: HTML Messages with plain-text signatures

    To get around the EAS security policy issue, I'm having non-sensitive emails from work forwarded to a GMail account from a redirect set up in our corporate OWA. The redirect seems to send the messages to GMail without any issues; formatting is 100% i

  • IPod Classic only syncs part of my songs, then grinds to a halt slowly

    Hi all, My iPod Classic (80 GB, almost 3 years old) and I are having beef. Every time I connect it to iTunes it starts syncing just fine, but then after X amount of songs it all of a sudden 'hangs' for a while and then pretends to continue at the gru

  • Regarding Send E-Mail..

    Dear Friend, I don't want to use coding. I want to send through Toolbar E-Mail Icon. I am not using SDK i want to configure E-Mail in SAP. I tried but when i wil click that Icon it throws Error, "Attachement folder not define and attache ment folder