Hub Manager does not show Wireless connection

My 'Hub Manager' shows my Ethernet connected PC; my hub phone and the wireless connected printer.
My daughter has a new laptop which has wireless connection to my Hub. According to her laptop it is connected to my Hub and she has access to the internet.
However, my Hub Manager does not show her as connected to the Hub. The result of this means that she cannot connect to the wireless printer.
We have disconnected and re connected to no avail.
Any thoughts??? All help appreciated.

Hi
to get more replies suggest you repost on the broadband board
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Desktop Manager does not show blackberry connected

I find this desktop manager is NOT set up for the average computer user and just wants you to PAY. As I was quoted $650.00 for one year of support. I will go back to Motorola before I pay that amount of cash. The Motorola software is user friendly and support was FREE. The only reason I got a BLACKBERRY is I won it and I broke my Motorola and needed a new phone anyway.
I have had this paperweight for two weeks and am very tempted to recycle it. I have installed this software twice and reinstalled it twice and every time I try to connect it to my computer the Desktop Manager does not pick up my Blackberry it shows Disconnected yet I have to go to safely remove hardware to disconnect it and it shows in there

I would suggest you use the following procedure to do a clean install of the 4.3 software and download 4.5
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=SAL_Pub...
I use this version and it is very stable with XP.
Here is the link for DM 4.5, I would STONGLY advise against downloading the media manager as it media not stable.
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Please let me know if you need any further assistance!
Thanks,
Message Edited by Bifocals on 09-02-2008 05:06 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Wifi problem: I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and n

I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and never happened before I have tried resetting the airport unit but still no luck please help.
Thank you
Roy from malden

Hi Roy, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Blackberry Desktop Manager does not show Media Manager

First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
   When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
         Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
Blackberry Desktop Manager
version 4.3.0.17 (Nov.12 2007)
Device Communications      Blackberry Device mgr....4.3.0.7
                                         BBDevMgr   ................4.0.0.1
                                         RIM USB Driver.............4.0.0.2
                                         RIM USB Serial Driver.......2.1.0.4
Application Loader          Application Loader ..........4.3.0.13
                                     RIMProgram .....................1.0.0.35
Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . . I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
I have memory cards inserted in the phone(s).
I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
Solved!
Go to Solution.

mamapajama wrote:
First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
   When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
         Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
Blackberry Desktop Manager
version 4.3.0.17 (Nov.12 2007)
Device Communications      Blackberry Device mgr....4.3.0.7
                                         BBDevMgr   ................4.0.0.1
                                         RIM USB Driver.............4.0.0.2
                                         RIM USB Serial Driver.......2.1.0.4
Application Loader          Application Loader ..........4.3.0.13
                                     RIMProgram .....................1.0.0.35
Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . . I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
I have memory cards inserted in the phone(s).
I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
Hi...
I can help you with the download link...
The link is here
When you get to the page that has the downloads, pay attention to which version your downloading as some have media manager (near bottom) and some do not have media manager (near top)
Let us know how your doing...
Do you have XP or Vista?
H.
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Desktop Manager does not recognize USB Connection

I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'. I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
file:///Users/Nigel/Desktop/WaitingForUSB.jpg

I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8. It recently stopped recognizing the USB connection as well. I was able to sync my BB with the MAC but can no longer do so. The MAC mounts the BB and I can access the SD card. What gives here?

WRT54G does not allow wireless connections

I installed a WRT54G V8 for my neighbor. After much pain and fights with the wizards I got it to where it works with wired computers. I set up the wireless and named it, selected security, recorded the Key, even had the wizard record the computer setup program on a USB drive.
The two wireless computers I have tried can both see the network but clicking connect does not get me the enter key window. Actually nothing happens after showing connecting for about a minute. I tried the setup program and it said it could not set up the computer. I tried setting up the parameters manually and then connecting nothing happens.
But the routers DHCP table shows the names of the two wireless computers as being connected.
Some time when I try to connect (with manual entered data) the network page will show "Not Connected" over the top of the network name. But the button at the bottom of the page has switched from "Connect" to "Disconnect" and the machine is in the DHCP table.
Any suggestions?

Greyhair wrote:
I am using XP SP2 on both of the wireless computers and I am using the default windows client. In the wireless networks tab is where we tried setting up the network manually. Are you saying that with a WRT54G I can have only one wireless network installed on the machines?
I will try it on one of the machines this afternoon when I go over to try again to get it to work.
Why is this so hard!??!
Hi greyhair ,
Ridcully did provide some good information.
The wireless network tab .
for that ,
strt>control panel>network connections or (network and internet connections) icon> network connections
Right click on the wireless network connection listed
go to properties ,
here you will find three tabs - general >wireless networks>advanced
you need to click on Wireless network
and remove preffered networks from the network list (even yours )!
and click ok !
and again , right click on wireless network connection > go to View aivialable wireless networks ....try connecting to your network by first clicking (highlighting)
on the network name , and then click connect.
any problem , feel free to ask here.
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Equium P200D PSPBNE: device manager does not show the DVD-RW DVR-K17A ATA DVD/CD

Hello experts out there i need urgent help!!
My Equium P200D all of a sudden it decided to show the DVD/CD Drive in device manager as no longer working due to a corrupt driver??
I am running Vista Home and despite deleting the drive and trying to update the driver nothing seem's to work can anybody help i am getting to the point of throwing it out of the window.
Regards
Stephen

Hi dude
This issue is known to me it happened to me too
The problem is you Windows registry!!!
One registry entry is corrupt and therefore the CD/DVD ROM does not work as I should.
So what to do.
Firstly remove the driver from the device manager. Just simply delete it.
Then access the registry and and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the notebook.
Check it out

HT4235 my iphone does not show as connected on itunes menu

suddenly my iphone will not show as a connected device in itunes even though my laptop recognzes that it is attached to my usb port
I have synced this phone before but now it is not recognized by itunes.

Hello wtcooper217,
It sounds like your iPhone is not seen in iTunes but your computer does recognize it. I recommend the troubleshootings steps from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
All the best,
Sterling

Sat P105-S2036 WinVista Device Manager does not show Tbios device

The label on the bottom of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. Device Manager had always showed Tbios as a device.
During the two days starting 3 days ago, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except Device Manager no longer shows Tbios device.
I am not able to find any Tbios WinVista driver at Support.Toshiba.com for all listed Satellite P105 models.
What does Tbios do to serve what purpose?
Is Tbios required for WinVista? If so, how may I find the driver to install.
THANKS for an answer in advance.

The label on the bottom of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. Device Manager had always showed Tbios as a device.
During the two days starting 3 days ago, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except Device Manager no longer shows Tbios device.
I am not able to find any Tbios WinVista driver at Support.Toshiba.com for all listed Satellite P105 models.
What does Tbios do to serve what purpose?
Is Tbios required for WinVista? If so, how may I find the driver to install.
THANKS for an answer in advance.

I just synced my 2 ipods but now my ipad does not show as connected when I try to sync it. Had no problem syncing before. Did troubleshooting but have not uninstalled itunes. Help!

just synced my 2 ipods with no problem now trying to sync my ipad and itouch and they do not show on the screen as usual . Help!

You give very few details. If I stated that .......
"I started my Nissan today and it started fine - but my Chevrolet will not start today - but it started yesterday. Help!" - you would probably have no idea where to begin with doling out advice or troubleshooting steps. What troubleshooting did you do? Obviously not all of it - if you did not uninstall and reinstall iTunes.
Quit iTunes, reboot your PC and then try again.
If that does not work, you could post back with the OS that your actually running on your computer - I am assuming that you are a Windows user and I could be wrong, but without some help from you .... Well we are just beating our heads against the wall.

WRVS4400N does not allow wireless connections

I've had the WRVS4400N for about six months. Three times in the past two months I have had to factory reset the device and reconfigure it because it would not allow any wireless connections. Perhaps unfortunately I applied the latest firmware update about a month before these problems began. Is there any work-around or setting change that I can make to avoid this problem? When wireless connections are impossible the device is still reachable via the ethernet connection.

If only the wireless is dorpping on the unit then, most probably a firmware concern. Try reflashing the firmware again if that helps. Also try to change some of the advance wireless settingso nthe router, set the RTS and fragmentation to thresholds to 2306 as well as teh beacon interval to 50.

Photoshop cs6 preset manager does not show all the basic brushes

So I'm having this problem: The brush panel shows all the default brushes, but the Brush Presets panel & the Brush Preset manager do not, intact the last brush they show is "100 Rough Round Bristle". If I want to load any other brush set, it over writes any brushes that appear after "100 Rough Round Bristle".
Need some serious help as my workflow is being severely hampered.
Cheers!
Arlen

it only shows the first 67 at max... if you delete anything before the 100 Rough Round, that becomes the new default number. It's like the rest of the brushes don't exist. Although I can select them in the Brush Panel. It's strange.

Laserjet p1102w does not maintain wireless connection with macbook pro

Above product was set up and working. If it sits idle for awhile it does not print. I have to click on WiFi signal, select hpsetup, then after that is complete reselect my network and then it prints. Printed self test page - device is 'connected'. Running OS 10.7.3

Yes. I had troubles getting it to work originally and I had to talk to someone at HP who helped me with it. We ended up setting it up manually and it worked fine; but if I don't use it for awhile it will not print. Actually that is not entirely true. Once in awhile it will - about 10% - but most of the time it will not unless I do the above.

PeopleSoft Report Manager does not show up reports

Folks,
Hello. I am using Peopletools 8.49.
The Report Manager has 4 tabs: List, Explorer, Administration, Archives
After I run reports using Process Scheduler, nothing shows up under the above 4 tabs and this message comes up:"Invalide or missing parameter in request" under List tab.
I have followed "Process Scheduler Documentation" - Chapter 5 "Using Report Manager" to configure it, but it's not working out.
The following solution is for PeopleTools 8.44:
http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/report-manager-nothing-showing-under-list-1011644
Can any folks tell me how to solve this problem in PeopleTools 8.49 ?

Folks,
Hello Thanks a lot for replying.
1) The default local node (PT_LOCAL) has been set a password that is login user password.
2) I think I define the Report node correctly under "PeopleTools>ProcessScheduler>ReportNodes" as follows:
Http Information is selected.
URL: http://127.0.0.1/psp/ps/psreports
(psp is Domain name, ps is Site name while configure Webserver. psreports is a folder in C:\)
URI Host: http://127.0.0.1
URI Port: 80
URI Source: don't need this since Scheduler and Webserver are in the same machine.
Logi ID: PSADMIN
Password:PSADMIN
Under Intergration Broker, I have done the follows:
1) Gateway, Domain, Pub/Sub Server are running.
2) Service Operations: PSRF_FOLDER_CREATE, PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE AND PSRF_REPORT_DELETE are set "active" and "Asynchronous One Way".
3) Login User PSADMIN are granted Roles "Report Super User" and "Report Dist Administrator".
But Report Manager still cannot display Reports by this point.
The only problem is that under "PeopleTools>IB>Configuration>Service Configuration>UDDI Configuration", when Ping the Inquiry URL and Publish URL, I got such an error message: "External System Contact error."
Inquiry URL: http://PTNTAS28/UDDI/INQUIRY
Publish URL: HTTP://PTNTAS28/UDDI/PUBLISHING
I think the "External System Contact error" cause Report Manager cannot display Reports. This problem is caused by "Gateway" or "UDDI Server" not running correctly.
Thus, I have 3 questions:
First, Do I need to change 4 Service Operations from "Asynchronous One-way" to "Request/Response" ? What is Receiver node for routings ?
Second, do I need to set up UDDI Server and configure it ?
Third,, where to set up single signon for the default local node (PT_LOCAL) ?

Application manager does not show Acrobat Pro in the list of apps

So I cannot use the application, because of a defect in the list of applications.
The serial number applies to Acrobat Pro, but it doesnt show up in the list of aplications in the application manager.

Veldenb are you a Creative Cloud Member or do you have a subscription to Acrobat? If so please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to have Acrobat become available.
Please also see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for additional information regarding installing and updating Adobe Creative applications.

Hub Manager does not show Wireless connection

Similar Messages

Maybe you are looking for