Hub restting when I'm not looking...

Question

This affy I looked at my home hub manager and it told me that I had been connected 11 hours and some minutes but I have not disconnected it in days.
Yesterday it told me it had been connected for 8 hours and some minutes meaning it had reconnected at some point in the morning.
Anyone any idea why it might be doing this?
I am trying to keep it connected to get the speed up. it is fine the rest of the time. My speed is ok at 6.8 ish.
Line state:
Connected
Connection time:
0 days, 11:20:36
Downstream:
7.661 Mbps
Upstream:
1.11 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
11.2 dB / 5.3 dB
Line attenuation (Down/Up):
33.4 dB / 20.2 dB
Output power (Down/Up):
20.4 dBm / 12.8 dBm
FEC Events (Down/Up):
104739512 / 585
CRC Events (Down/Up):
89316 / 154
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
75903 / 290
Error Seconds (Local/Remote):
38304 / 54

Answer 1

Hi Somniac,
I've been having the exact same problems, my HUB was restarting every few hours, normally around 10-11am every morning regardless if I was on the PC. I had worse stats than yourself (in regards to Errors/ CRC/ FEC). I cleaned the inside of my computer, that was PACKED with dust, and restarted the HUB.
Now initially the Errors that were in thousands within a couple of seconds were gone, and 21hours since then its still going!
HEC Events (Down/Up):
484 / 151
Error Seconds (Local/Remote):
23 / 287
Now my Noise Margin still is pretty high because of the previous disconnections & now my IP Profile needs reset.
I'm still getting a high FEC Errors & very small CRC Errors
FEC Events (Down/Up):
4275792 / 31400
CRC Events (Down/Up):
86 / 321
I'm hoping once the Noise Margin (that is standing at 15dB goes, so will the majority of the Errors.
This isnt a plan, and got I dont know what happened, but if you got time, have a look...never know
& trust me, I know it doesnt effect the HUB, but it could of been on the connection..no idea ;d