HUB showing contact number with country code and not with its name..blackberry Z10 STL100-2

I have an issue with Text Messages and call lists, in my blackberry Z10 (STL100-2), which is, If I have not saved my contact numbers without country code, the msg may appear in local formate (w/o country code), and it also appear as International formate (another times), and though the number is same (only saperate is country code) in the hub, it appear as two conversation. for eg: if I sent txt to 9899100 (w/o country code), reply used to come as +960-9899100. or vice-versa.
So its very difficult. and here i came for help.
You might know a lot what we do not know as we do know a lot you do not know. Asking is the way to get to know....

The movies were all on my SD card. They are also not backed up by Link which is why had them synced to my phone as a poor man's backup.
So either Link did not backup the necessary licensing information in the main memory of my phone, or Link did not synchronize the necessary licensing information off my SD card. Either way I am stuck with 3 movies that I cannot play, because I can no longer find them in the BlackBerry World store to re-dowbload whatever licensing information is needed.
I even just tried a media restore from Link because it was 138 MB in size (and in don't normally store anything on my phone's main storage), but alas no licensing information was restored.

Similar Messages

Code works with Dreamweaver CS6 and not with CC

<p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
[Edited Title and moved to Dreamweaver- JTS]

I'm not quite sure I understand your point.
I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
<p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
</p>
Dreamweaver CC also adds the following code to the <head> of the page:
<script type="text/javascript">
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.adobe.com/products/dreamweaver
Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC.

I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

Booting with mode CLI and not with the console.

hi,
On a SF300-08, is anybody knows how to work with CLI and not with the Console Menu Interface ?
Thank you for your help.
Pascal Linglin

Hi Pascal.
Firstly make sure your switch is using the most recent firmware, which is now as of yesterday 1.1.2.0 .
When that firmware is running on the switch, a textview CLI option should be seen on the main menu as per the following screen capture;
to get back to the menu, just type menu from the cli interface.
Hope i answered your question?
regards Dave

Is It Possible to Embed a PayPal Button with HTML Code and Not Widget?

I noticed that Muse doesn't have a PayPal Subscribe button for monthly payments.
PayPal can give me HTML code to embed the button in the website.
Will the HTML code work if I embed it with Muse?

Hello,
Yes you can do that.
Insert code in <Body> of Page:
To insert HTML code in Body of page
Open the page in design mode.
Go to Object > Insert HTML.
Past the code in the window and hit OK.
To insert HTML code in <Head> of Page
Open Page in design Mode
Go to Page > Page Properties > Metadata > HTMl for Head
Paste the code in HTML for <head> section and click OK
Regards
Vivek

Datasource works with java code but not with sql:query dataSource=...

Hello everyone! I have a small problem with binding a DataSource object via JNDI and retrieving it in a web application. This is the case:
I did not wish to make the DataSource available through the server.xml, because I want to create applications that can be bundled in a simple .war file. So I create the DataSource when the context is created in the contextInitialized() method of ServletContextListener like this:
InitialContext initialContext = new InitialContext();
Properties properties = new Properties();
properties.setProperty( "driverClassName", "com.mysql.jdbc.Driver" );
properties.setProperty( "factory",   "org.apache.commons.dbcp.BasicDataSourceFactory" );
properties.setProperty( "username", servletContext.getInitParameter( "dbUser" ) );
properties.setProperty( "password", servletContext.getInitParameter( "dbPass" ) );
properties.setProperty( "url",      servletContext.getInitParameter( "dbUrl" ) );
properties.setProperty( "defaultAutoCommit", "false" );
properties.setProperty( "maxActive",         "25" );
properties.setProperty( "initialSize",       "15" );
properties.setProperty( "maxIdle",           "10" );
properties.setProperty( "testOnBorrow",      "true" );
properties.setProperty( "testOnReturn",      "true" );
properties.setProperty( "testWhileIdle",     "true" );
properties.setProperty( "validationQuery",   "SELECT 1" );
properties.setProperty( "removeAbandoned",   "true" );
DataSource dataSource = BasicDataSourceFactory.createDataSource( properties );
initialContext.rebind( "daers", dataSource );Please comment if you think this is a bad idea!
All the above seems to work fine. When I try to retrieve the DataSource in a .jsp file then it all works fine like this:
<% try {
        javax.naming.InitialContext initialContext = new javax.naming.InitialContext();
        java.sql.Connection conn = ( ( javax.sql.DataSource )initialContext.lookup( "daers" )).getConnection();
        java.sql.Statement statement = conn.createStatement();
        java.sql.ResultSet resultSet = statement.executeQuery("SELECT users.name FROM users;");
        while (resultSet.next()) {
            System.out.println(resultSet.getString(1));
    } catch ( java.sql.SQLException e ) {
        e.printStackTrace();
    } catch ( javax.naming.NamingException e ) {
        e.printStackTrace();
%>But when I try to execute the same sql query through the appropriate JSTL taglib I get a:
javax.servlet.ServletException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver"The JSTL code I use is this:
<sql:query dataSource = "daers" var = "query" scope = "page">
        SELECT users.name
        FROM users
    </sql:query>I do put both of the two above pieces of code in the same .jsp page and the first works but the second causes the exception...
Any clues..?
Is it illegal to lookup a DataSource in <sql: dataSource=...> if the DataSource is not registered in the server.xml file..?
If so, do I have any alternatives (like putting the DataSource as a servlet context variable)..?

I added a response in your original message:
http://forum.java.sun.com/thread.jspa?messageID=9629812
Let's keep to it since splitting things across two posts might be confusing.

Formatting DATEs with FORMAT clause and not with "to_date()" ?

Well I know I could format a DATE inline with the to_date() function.
But is there a way to format it in a separate FORMAT clause similar to
numbers?
If yes how would a format of
dd.mm.yyyy
or
yyyy.mm.dd hh:mm:ss
look like?

user559463 wrote:
Ok, again I am searching something like
COLUMN "expiry" FORMAT "YYYY.MM.DD HH:MM:SS"No, it can only be done via TO_CHAR or NLS_DATE_FORMAT. I think you should read SQL*Plus COLUMN command.
SY.

In User groups user name is shown as ADLDSMembershipProvider:UserID and not with First & Last Name

Hello,
In SharePoint site Groups for some users, user name is coming up with ADLDSMembershipProvider:UserID and not with the correct first name and last name.
Can some one please advice how i can get the correct first name and last name for the users, below screenshots for your
reference.
Please advice.
Regards,
Purvish Shah

Hello,
What version of sharepoint you are using?
It seems that you have also configured custom membership provider with AD LDS. To verify this go to central admin and check the web application properties to confirm what auth method is being used.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Country codes and contacts

Hello,
Traveling to the UK soon and am adding the contact info for our lodging, etc into my contact list. I have a Verizon iPhone 4S with an international sim unlock and plan on getting a pay-as-you-go sim with a local number when we arrive. The question is, How should I set up the numbers in my contact list? Should they be entered as local numbers or using the country code (+44)?
Thanks in advance.
KV
P.S. Verizon's customer service when I requested the unlock was quite good and they didn't pressure or even ask if I would rather get their international calling plan!

Thank you for explaining it. I do travel a lot on business and because of the roaming charges I have a factory unlocked iPhone 4S and use local Sim cards most of the time. when I am in the US like right now, I use a Tmobile card only because AT&T will not sell me a card without a contract and I am not here long enough to make that investment worthwhile. The downside is that I only get Edge data but most of the time that is better than going without data.
What I do to have my home phone available is put my local Sim Card for my home country in my old iPhone 4 locked to my carrier and have roaming data turned off in that one. I use the Tmobile to make calls and receive them from US contacts and the iPhone 4 to receive calls from international contacts.
To address your question finally, I always keep all contacts from everywhere with a + sign in front which gets me international access in all countries, then the country code and then the local number. I keep my contacts list synced in both phones, iPad and 2 macs through iCloud. there is no problem dialing and reaching local contacts that way even though you don't need to, but it is convenient so that you can access those contacts from everywhere directly from your contacts list.
For example, all my US contacts are written +1(212)1234567, my UK contacts +44123456789, my French contracts +33123456789, etc. and therefore, theynworknfrom everywhere.
I guess I will now investigate whether Verizon will sell me a local US sim with 4G data to use in the US on a monthly plan or better still a pay as you go plan.

All my contacts are stored with country code for eg 233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please help

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

How do I insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number].

I'd like to program a LOCAL ACCESS NUMBER, then insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number]. Dialing the local, US access number is not an issue, but I can't find any info in the manual on how to insert a WAIT or PAUSE or how to insert the remaining string of international codes and destination phone number. Any help would be appreciated. Thanks!

How to Add Pauses when you Dial a Number on the Samsung Galaxy Note 3 - For Dummies
It is also described on page 42 of your owners manual...

Computer Name prompt with Country Code

Using SCCM 2012 R2..
Currently we have 21 global sites indicated by a two digit country code, for example United States US, United Kingdom, GB, Spain ES etc.....
We are a Dell shop so we want the serial number as well.
Our end result should look like this. United States Computer
<CountryCode>-<Serialnumber>
US-23GHT54 for example.
What is the best way to have a drop down or prompt for country code in computer name field when a tech starts the OSD process??

Hi
You can have a look at two of my blog post. The first one will show you how to enable Powershell support in your boot images:
http://www.mimercon.dk/da/easyblog/entry/adding-powershell-support-in-configuration-manager-2012-r2-boot-images
And the second one will guide you through all the step required to implement a Powershell GUI prompting for a Computer Name if the machine is unknown:
http://www.mimercon.dk/da/easyblog/entry/prompt-for-computer-name-during-configmgr-2012-r2-os-deployment-1
I know that this is not exactly what you want but you would "only" need to create your own Powershell GUI where you can select the country code and append the serial number to get your computer name generated. And then you could just follow the
step in the second post and substitue my Prompt-Computer-Name GUI with your own.
If you know a bit about about Windows Forms and Powershell it is fairly easy to create even though it might be easy for me to say that :)
If you want I could create a basic GUI for you but you would have to be specific in how you would like it to look and I would need all the country codes you need in the drop-down box. You can find my e-mail at my web site.

Dial with country code as prefix won't work

Hey
The Sony Z1 latest ROM have the issue, it can't dial when the phone number don't have + before the country code.

jackychen wrote:
Hey
The Sony Z1 latest ROM have the issue, it can't dial when the phone number don't have + before the country code.
If you actually use the country code, it has to be prefixed with + (or two zeros)
If you are calling a number in your home network/country and don't want to use the + sign, then omit the whole country code at all.
It is not possible to call a number along with country code without + or 00 before this code, and this is not some xperia thing, it simply works this way (unless your operator have some different policy but I can only guess about it).
When everything have failed already, try to read the manual.
Kudos mean I am helpful. Am I for you? Then support me back

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I am qualified for the free version of lion...once I took a snap shot of my proof of purchase, it said it would send me a confirmation email with a code and it never did?

I am qualified for the free version of lion...once I took a snap shot of my proof of purchase, it said it would send me a confirmation email with a code and it never did?

You will get a .pdf file with the Redemption Code in it in your registered email inbox. You will have to enter the Redemption Code into the Redeem link on the right in App Store.
You will also receive an additional email with a password to open the .pdf file from the first email.
Enter the password to .pdf file > Copy the redemption code and enter it in App Store > Enter your Apple ID and password in the App Store pop-up > Poof!!! Magic! Your OS X Lion icon shows up in your dock and the download begins!

HUB showing contact number with country code and not with its name..blackberry Z10 STL100-2

Similar Messages

Maybe you are looking for