Hub working but only to wired devices

Had my homehub for about 3 weeks and its been working fine but today the wireless devices attached to it have been having problems with losing their connection, I have a netbook for the kids that just does not want to connect to the internet anymore.
All the devices are seeing the hub and trying to authenticate but getting no internet.
Any suggestions, more information required?

Remember to disable "smart wireless", then you will get a full choice of channels, and not just three.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for thos

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go.  it worked, but only for those with adobe pro.  i could not get it to work with reader.  is there a way i can make it work for reader?

    Noted.
    The LiveCycle user to user forum is across town at:
    Adobe LiveCycle 
    Be well...

  • My phone got wet about a week ago and after a lot of time in rice, it's working, but only intermittently.  is there still hope or should i start shopping?

    my phone got wet about a week ago and after a lot of time in rice, it's working, but only intermittently.  is there still hope or should i start shopping?

    Apple Store will exchange for an out of warranty exchange iphone 4 at $149
    If a new iPhone is not an alternative
    Like for like and will be like new

  • Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

    Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

    Ask whom/wherever you got the redemption code from for one that has not already been used.

  • My camera on snapchat works but only the front.. and my actual camera doesnt?

    my camera on snapchat works but only the front.. and my actual camera doesnt?

    Have you tried closing the Camera app via the multitasking bar and seeing if it works properley when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Camera app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4972 When I tried to update my iOS 4 ipad to iOS 6, it doesn't work but only say that the ipad software update server cannot be contacted. What should I do?

    When I tried to update my iOS 4 ipad to iOS 6, it doesn't work but only say that the ipad software update server cannot be contacted. What should I do?

    Hi Ruby,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting steps in this article helpful for troubleshooting the connection issue you're seeing:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    Jeremy

  • The wi-fi is working but I get I grayish screen when I use safari.  The touch screen is also not working but only on safari (well internet).  How do I fix that?

    Good day,
    I get a grayish screen when I access internet via my Ipad.  The touch screen is also not working but only with internet.  How do I fix that?
    thank you
    mélanie

    I have the same problem! Can anyone help us? Thanks!!

  • My microphone is not working but only for calls

    I had my Iphone working perfectly until I updated to 4.3.1 after that I lost the microphone but only for calls when I use Skype, Video recording and may other features that uses microphone all of them worked. I did restore again to 4.3.1 and make a new fresh installation without recovering my data so now I'm not only without phone features but also need to load all of my data again. This occurs most of the time but about 2 of 10 calls the people can hear me so I think this must be related to baseband update or hadware issue.

    Might try setting the option in System Preferences > Sound > Input tab > check "use ambient noise reduction"
    Regards,
    Captfred

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • My online number is working, but only for 10 secon...

    Hi,
    I purchased an online number today, its all setup and working, but I can't hold the call for longer than 10 seconds.
    It does not seem to be my connection, as a normal skype VIDEO call works perfectly.
    Im on a BT infinity fiber line at 40MB.
    It seems to timeout from the callers end.
    Please can I get some advise or have a technical engineer help resolve the issue?
    cheers,

    if this is a business connection your better off in the business forums

  • ALSA works, but only with one application at a time.

    Hello,
    Before I continue my post, I would like to say that I have read this section on the wiki:
    https://wiki.archlinux.org/index.php/AL … ack_Issues
    It asks the user to edit /etc/asound.conf (which does not exist) in order to comment out a few lines that will fix the problem. It's quite frustrating to need to close all audio using programs every time I want to play audio. I do not have pulseaudio installed. I tried installing OSS4 in order to fix the problem, but for some reason my kernel headers were not detected and I couldn't start the daemon. I would appreciate it if someone could reply to me and tell me what the problem could be.
    Thanks,
    Dragos

    I'm using a part of your config right now. It doesn't appear to be working correctly, or perhaps I'm not looking at the right section?:
    pcm.dmixed {
    type asym
    playback.pcm {
    # See plugin:dmix at http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
    type dmix
    ipc_key 5678293
    ipc_perm 0660
    ipc_gid audio
    # Don't put the rate here! Otherwise it resets the rate & channels set below, as shown by: cat /proc/asound/card0/pcm0p/sub0/hw_params
    slave {
    # 2 for stereo, 6 for surround51
    channels 6
    pcm {
    # mplayer chooses S32_LE, but others usually S16_LE
    #format S32_LE
    format S16_LE
    # 44100 or 48000
    #rate 44100
    rate 48000
    type hw
    card 0
    device 0
    subdevice 0
    # mplayer2 chooses 1024
    # period_size 512 with buffer_size 16384 stops crackling in xmame
    # 320 breaks flash - https://bbs.archlinux.org/viewtopic.php?id=129458
    #period_size 512
    period_size 1024
    # 2730 is chosen by "speaker-test"
    #period_size 512
    #period_time 20000
    #periods 8
    # 4096 makes Thief 1 in wine crackle.
    # mplayer2 chooses 8192
    #buffer_size 5460
    # 5460 (2730*2) is too small for mplayer2
    # If too large, use CONFIG_SND_HDA_PREALLOC_SIZE=2048
    buffer_size 8192
    #buffer_size 4096
    #buffer_time 682667 # 32768 samples at 48 kHz, in µs
    # 16384 seems best to stop crackling in Skype
    #buffer_size 16384
    # Seems good
    #period_size 256
    #periods 16
    #buffer_size 16384
    # Old config
    #buffer_size 10240
    #period_size 2048
    # Other options to maybe play with:
    #period_time 2
    #periods 2
    bindings {
    0 0
    1 1
    2 2
    3 3
    4 4
    5 5
    capture.pcm "hw:0"
    pcm.!surround51 {
    type plug
    slave.pcm "dmixed"
    This is my asound.conf file. I'm sorry if I'm not finding the section you were talking about.
    Thanks,
    Dragos

  • Sleep WORKS, but only once...

    Finally, virtually everything I've ever wanted working on my laptop works thanks to Arch, including the elusive ACPI S3 sleep mode. There is only one problem: the ACPI exits on resume from sleep, which means I manually have to type in /etc/rc.d/acpid start before it will sleep again, or before my battery and temperature monitoring applets will work. Admittedly, this is a small annoyance next to it not resuming at all, but I'm SO CLOSE to every single feature working flawlessly, and this seems like such a small thing. However, I am baffled. My /var/log/acpid :
    [Fri Aug 25 11:11:49 2006] received event "button/lid LID 00000080 00000006"
    [Fri Aug 25 11:11:49 2006] notifying client 6122[0:0]
    [Fri Aug 25 11:11:49 2006] notifying client 6156[0:0]
    [Fri Aug 25 11:11:49 2006] completed event "button/lid LID 00000080 00000006"
    [Fri Aug 25 11:11:49 2006] exiting
    [Fri Aug 25 11:27:37 2006] starting up
    [Fri Aug 25 11:27:37 2006] 0 rules loaded
    [Fri Aug 25 11:27:37 2006] events file connection closed
    [Fri Aug 25 11:27:37 2006] exiting
    As I understand it, acpid is designed to exit when it finds a /proc/acpi/events file that is closed. Somehow, on resume, this file is not being initialized again fast enough by the kernel. I'm using the 2.6.17-beyond3 kernel. ACPI is just serving as an events concentrator for powersaved, hal-acpi-addon, and all of the other programs that otherwise fight over the /proc/acpi/events file. The suspend2ram.log file from powersaved:
    suspend2ram initiated: 2006-08-25 11:11:49
    Debug info follows here, please include in your bug reports. Thanks.
    Loaded modules:
    Module                  Size  Used by
    ath_pci                74532  0
    ehci_hcd               25608  0
    uhci_hcd               18440  0
    sha256                 11520  0
    twofish                44800  2
    fglrx                 383596  8
    ip_queue                7840  1
    iptable_filter          3072  1
    ip_tables              11236  1 iptable_filter
    ipv6                  203424  10
    rfcomm                 29332  0
    hidp                   12800  2
    l2cap                  18688  10 rfcomm,hidp
    bluetooth              37220  5 rfcomm,hidp,l2cap
    sd_mod                 14848  0
    pcmcia                 27820  0
    wlan_scan_sta          11520  1
    usb_storage            67776  0
    snd_seq_oss            26368  0
    snd_seq_midi_event      6400  1 snd_seq_oss
    slamr                 427304  0
    snd_seq                42576  4 snd_seq_oss,snd_seq_midi_event
    snd_pcm_oss            32160  0
    snd_mixer_oss          14208  1 snd_pcm_oss
    i2c_viapro              7572  0
    i2c_core               15872  1 i2c_viapro
    yenta_socket           21004  1
    rsrc_nonstatic         10240  1 yenta_socket
    pcmcia_core            31128  3 pcmcia,yenta_socket,rsrc_nonstatic
    shpchp                 30504  0
    pci_hotplug            24004  1 shpchp
    amd64_agp               9796  1
    agpgart                24012  2 fglrx,amd64_agp
    ath_rate_sample        10240  1 ath_pci
    wlan                  155612  4 ath_pci,wlan_scan_sta,ath_rate_sample
    ath_hal               190160  3 ath_pci,ath_rate_sample
    ohci1394               27568  0
    ieee1394               74840  1 ohci1394
    tg3                    88580  0
    via_ircc               16916  0
    snd_via82xx            21528  2
    gameport               11016  1 snd_via82xx
    snd_mpu401_uart         6528  1 snd_via82xx
    snd_rawmidi            17952  1 snd_mpu401_uart
    snd_seq_device          6540  3 snd_seq_oss,snd_seq,snd_rawmidi
    snd_via82xx_modem      10888  6
    snd_ac97_codec         79520  2 snd_via82xx,snd_via82xx_modem
    snd_ac97_bus            2688  1 snd_ac97_codec
    snd_pcm                64644  6 snd_pcm_oss,snd_via82xx,snd_via82xx_modem,snd_ac97_codec
    snd_timer              17412  2 snd_seq,snd_pcm
    snd                    40292  26 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_via82xx_modem,snd_ac97_codec,snd_pcm,snd_timer
    soundcore               7520  1 snd
    snd_page_alloc          7688  3 snd_via82xx,snd_via82xx_modem,snd_pcm
    ppdev                   7300  0
    lp                      9092  0
    rtc                    10036  0
    irda                  102200  1 via_ircc
    crc_ccitt               2688  1 irda
    parport_pc             22564  1
    parport                28616  3 ppdev,lp,parport_pc
    joydev                  7872  0
    evdev                   7680  2
    acerhk                 23676  0
    cpufreq_ondemand        6444  1
    powernow_k8            10912  0
    freq_table              4256  1 powernow_k8
    capability              3848  0
    commoncap               5760  1 capability
    usbcore                97408  4 ehci_hcd,uhci_hcd,usb_storage
    ext3                  107528  3
    jbd                    48020  1 ext3
    dm_crypt                9352  1
    dm_mod                 42648  7 dm_crypt
    ide_cd                 32160  0
    cdrom                  30368  1 ide_cd
    ide_disk               14724  3
    via82cxxx               8068  0 [permanent]
    generic                 4740  0 [permanent]
    ide_core               99912  5 usb_storage,ide_cd,ide_disk,via82cxxx,generic
    Memory info:
                 total       used       free     shared    buffers     cached
    Mem:       1035084     288908     746176          0      13860     136012
    -/+ buffers/cache:     139036     896048
    Swap:      2097144          0    2097144
    /proc/cmdline: root=/dev/system/root ro video=vesafb:ywrap,mtrr,1400x1050-32@75 splash=silent,theme:gir console=tty1 quiet resume2=swap:/dev/system/swap
    ========we are going to sleep, preparing.========
    == checking runlevel ==
      no shutdown/reboot in progress, good.
    == Unmounting FAT/NTFS filesystems: ==
      none found in /etc/mtab
    == FAT/NTFS filesystems unmounted ==
    Stopping services: ('networkmanager acpid acpid cups netfs alsa network' configured)
    stopping acpid:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mStopping acpid[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    stopping netfs:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mUnmounting network filesystems[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    stopping alsa:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mSaving ALSA Levels[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    stopping network:
    ##  stty: standard input: Invalid argument
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mStopping Network[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    ejecting PCMCIA cards...
    Unloading modules: ('prism54 nvidia ath_pci nvsound acx100 acx_pci hsfmodem prism54 bcm4400 emu10k1 forcedeth ipw2100 ipw2200 natsemi psmouse rt2400 ehci_hcd ohci_hcd uhci_hcd ehci-hcd usb-ohci usb-uhci snd_ens1370 snd_ens1371 en1370 en1371 via_agp via_rhine i8042 intel_mch_agp rt2500 button speedstep_smi ndiswrapper usblp' configured)
    checking prism54
    checking nvidia
    checking ath_pci
    # trying to unload: ath_pci
    unloaded: ath_pci
    checking nvsound
    checking acx100
    checking acx_pci
    checking hsfmodem
    checking prism54
    checking bcm4400
    checking emu10k1
    checking forcedeth
    checking ipw2100
    checking ipw2200
    checking natsemi
    checking psmouse
    checking rt2400
    checking ehci_hcd
    # trying to unload: ehci_hcd
    unloaded: ehci_hcd
    checking ohci_hcd
    checking uhci_hcd
    # trying to unload: uhci_hcd
    unloaded: uhci_hcd
    checking ehci-hcd
    checking usb-ohci
    checking usb-uhci
    checking snd_ens1370
    checking snd_ens1371
    checking en1370
    checking en1371
    checking via_agp
    checking via_rhine
    checking i8042
    checking intel_mch_agp
    checking rt2500
    checking button
    checking speedstep_smi
    checking ndiswrapper
    checking usblp
    prepare_sleep finished for suspend2ram
    /usr/sbin/s2ram not found, falling back to echo.
    ==== finished, return code 0 ====
    ========we are back from suspend, cleaning up.========
    == restore_after_sleep: restart and reload everything ==
    Resuming:
    switched back to console: ' 7'
    Reloading modules:
      uhci_hcd
      ehci_hcd
      ath_pci
    inserting PCMCIA cards...
    Restarting services:
    starting network:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mStarting Network[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    starting alsa:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mRestoring ALSA Levels[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    starting netfs:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mMounting Network Filesystems[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    starting acpid:
    ##  stty: standard input: Invalid argument
    ##  [1;34m:: [1;37mStarting acpid[1;0m [-9G   [1;34m[[0;36mBUSY[1;34m][1;0m [-9G   [1;34m[[1;37mDONE[1;34m][1;0m
    Remounting filesystems:
      not necessary.
    ======================================
    restore_after_suspend_to_ram: finished
    Sorry about the messed up characters. I've tried adding acpid to the services restarted by powersaved, and even editing the powersaved scripts so that they'll run /etc/rc.d/acpid start as the absolute last possible thing, with no luck. If anyone has any insights into how this might be fixed, I would appreciate the help. If I can get this resolved, I would be more than happy to write a wiki tutorial on how to get my laptop, an Acer Ferrari 3200 fully functional on ArchLinux.
    Thanks in advance,
    joshuaheretic

    You might try this approach, using the following workflow...
    1) *Get Specified Finder Items* -- press the "+" sign, navigate to the target folder and choose it.
    2) *Set Folder Views* -- move the icon slider to 128, etc., and check "Apply Changes to Sub-folders."
    From Automator's File menu select Save As Plug-in > Plug-in for: Folder Actions.
    The AppleScript, located in the User > Library > Scripts > Folder Action Scripts folder, can then be modified:
    on adding folder items to this_folder after receiving added_items
    tell application "Macintosh HD:Users:username:Library:Workflows:Applications:Folder Actions:Make 128.app"
    run -- 'run' replaces 'open added_items'
    end tell
    end adding folder items to
    This has worked for me consistently (so far) using Mac OS 10.4.11; not tested in Leopard. Your results may vary.
    Good luck.

  • Spdif working but only for AC3/DTS, problem occured suddenly

    Hi all,
    My spdif output decided to stop outputting normal sounds. It will only work with AC3/DTS. This seemed to happen suddenly, one minute it was working and the next it wasn't. I hadn't changed anything with regards to the sound setup. IEC958 is unmuted in the Alsamixer app. Not sure what else to check. I think the problem occured when one of my apps crashed so maybe that has something to do with it but I tried rebooting, shutting down completely etc. I can't think of anything else to check.
    Any help would be greatly appreciated, this is a media computer and SPDIF is my only option for sound.
    Thanks,
    Kevin

    I forgot the power of ssh... The mplayer switches you suggested still result in 2ch. Here is the output of the alternative solution from the link you gave.
    $ amixer set 'IEC958' 100 unmute
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined cswitch cswitch-joined
    Playback channels: Mono
    Capture channels: Mono
    Mono: Playback [on] Capture [off]
    FYI: Every time I play something, IEC958 is muted again when I go into alsamixer.
    Last edited by gormine (2007-12-07 13:35:15)

  • ISight Working but only with Photo Booth

    My built-in iSight is not working with several apps including Skype and iChat. iChat gives message being used by different application. the camera does work with Photo Booth. This is a new problem that has developed since upgrading from 10.5 to 10.5.1. I have tried several steps (PMU reset, deleting Photo Booth preferences, etc) but no joy.
    Would appreciate any other thoughts.... There do seem to be a rash of similar issues under discussion at the moment but I can't seem to find a solution that works for me.

    Hello Sanpper F
    (0) Shut down everything and restart your modem, router (if you use one), and Mac. Let each device's self-test complete before starting the next. When all have restarted, check to see if you still have the problem.
    (1) Try all relevant from http://docs.info.apple.com/article.html?artnum=93240 and test again.
    (2) Try reapplying the Mac OS X 10.5.1 Update. Repair permissions after the restart at the completion of the installer run. Then check to see if your trouble is fixed.
    (3) If none of the suggestions you get here solves your problem, when you post back please:
    (a) list every app you tried iSight with that does not work.
    (b) tell whether the problem behaved EXACTLY the same in a new user account
    (c) verify that your QuickTime Streaming Speed preference is set to your broadband speed (not "Automatic")
    (d) list anything else that changed (network or Firewall settings, added hardware or software, etc.) since the problem apps worked correctlly
    If needed, we will try to offer more specific suggestions based on the details in your reply.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

Maybe you are looking for